bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Apply loop shorthand macros (#17159)

Browse Source
This commit is contained in:
Scott Lahteine
2020-03-13 23:18:16 -05:00
committed by GitHub
parent a96be32fae
commit 118bd2f8b2
93 changed files with 465 additions and 505 deletions
Download Patch File Download Diff File Expand all files Collapse all files

44
Marlin/src/inc/Conditionals_LCD.h
View File

@ -604,8 +604,52 @@
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#endif
/**
* Set granular options based on the specific type of leveling
*/
#if ENABLED(AUTO_BED_LEVELING_UBL)
#undef LCD_BED_LEVELING
#if ENABLED(DELTA)
#define UBL_SEGMENTED 1
#endif
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
#define ABL_PLANAR 1
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
#define ABL_GRID 1
#endif
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
#define HAS_ABL_NOT_UBL 1
#endif
#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
#define HAS_MESH 1
#endif
#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
#define NEEDS_THREE_PROBE_POINTS 1
#endif
#if EITHER(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL)
#define HAS_ABL_OR_UBL 1
#if DISABLED(PROBE_MANUALLY)
#define HAS_AUTOLEVEL 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, MESH_BED_LEVELING)
#define HAS_LEVELING 1
#if DISABLED(AUTO_BED_LEVELING_UBL)
#define PLANNER_LEVELING 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, Z_MIN_PROBE_REPEATABILITY_TEST)
#define HAS_PROBING_PROCEDURE 1
#endif
#if !HAS_LEVELING
#undef RESTORE_LEVELING_AFTER_G28
#endif
#ifdef GRID_MAX_POINTS_X
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
#define GRID_LOOP(A,B) LOOP_L_N(A, GRID_MAX_POINTS_X) LOOP_L_N(B, GRID_MAX_POINTS_Y)
#endif
#ifndef INVERT_X_DIR

4
Marlin/src/inc/Conditionals_adv.h
View File

@ -83,6 +83,10 @@
#endif
#endif
#if ANY(FWRETRACT, HAS_LEVELING, SKEW_CORRECTION)
#define HAS_POSITION_MODIFIERS 1
#endif
#if ANY(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_MULTI_ENDSTOPS)
#define HAS_EXTRA_ENDSTOPS 1
#endif

47
Marlin/src/inc/Conditionals_post.h
View File

@ -1854,53 +1854,6 @@
#endif
#endif // SKEW_CORRECTION
/**
* Set granular options based on the specific type of leveling
*/
#if ENABLED(AUTO_BED_LEVELING_UBL)
#undef LCD_BED_LEVELING
#if ENABLED(DELTA)
#define UBL_SEGMENTED 1
#endif
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
#define ABL_PLANAR 1
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
#define ABL_GRID 1
#endif
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
#define HAS_ABL_NOT_UBL 1
#endif
#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
#define HAS_MESH 1
#endif
#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
#define NEEDS_THREE_PROBE_POINTS 1
#endif
#if EITHER(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL)
#define HAS_ABL_OR_UBL 1
#if DISABLED(PROBE_MANUALLY)
#define HAS_AUTOLEVEL 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, MESH_BED_LEVELING)
#define HAS_LEVELING 1
#if DISABLED(AUTO_BED_LEVELING_UBL)
#define PLANNER_LEVELING 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, Z_MIN_PROBE_REPEATABILITY_TEST)
#define HAS_PROBING_PROCEDURE 1
#endif
#if ANY(FWRETRACT, HAS_LEVELING, SKEW_CORRECTION)
#define HAS_POSITION_MODIFIERS 1
#endif
#if !HAS_LEVELING
#undef RESTORE_LEVELING_AFTER_G28
#endif
/**
* Heater, Fan, and Probe interactions
*/