bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Revert to Probe Raise rather than Probe Height

Browse Source
This commit is contained in:
Scott Lahteine
2016-09-13 20:25:12 -05:00
parent 5cbed13f41
commit 0e7d638a7a
25 changed files with 387 additions and 167 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -598,12 +598,22 @@
// Enable Z Probe Repeatability test to see how accurate your probe is
//#define Z_MIN_PROBE_REPEATABILITY_TEST
//
// Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
//
#define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
/**
* Z probes require clearance when deploying, stowing, and moving between
* probe points to avoid hitting the bed and other hardware.
* Servo-mounted probes require extra space for the arm to rotate.
* Inductive probes need space to keep from triggering early.
*
* Use these settings to specify the distance (mm) to raise the probe (or
* lower the bed). The values set here apply over and above any (negative)
* probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.
* Only integer values >= 1 are valid here.
*
* Example: `M851 Z-5` with a RAISE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a RAISE of 2 => 2mm from bed to nozzle.
*/
#define Z_RAISE_DEPLOY_PROBE 15 // Z Raise for Deploy/Stow
#define Z_RAISE_BETWEEN_PROBES 5 // Z Raise between probe points
//
// For M851 give a range for adjusting the Z probe offset