From 0cccc60409c4b237d747fdf49b648f1cbed7ddde Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 11 Nov 2020 16:58:09 -0600 Subject: [PATCH] Terse sanity messages --- Marlin/src/inc/SanityCheck.h | 470 +++++++++++++++++------------------ 1 file changed, 230 insertions(+), 240 deletions(-) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 0f98a8badf..2ef4cbb785 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -79,9 +79,9 @@ * Warnings for old configurations */ #ifndef MOTHERBOARD - #error "MOTHERBOARD is required. Please update your configuration." + #error "MOTHERBOARD is required." #elif !defined(X_BED_SIZE) || !defined(Y_BED_SIZE) - #error "X_BED_SIZE and Y_BED_SIZE are now required! Please update your configuration." + #error "X_BED_SIZE and Y_BED_SIZE are now required!" #elif WATCH_TEMP_PERIOD > 500 #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds." #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) @@ -93,41 +93,41 @@ #elif defined(X_HOME_RETRACT_MM) #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM." #elif defined(SDCARDDETECTINVERTED) - #error "SDCARDDETECTINVERTED is now SD_DETECT_STATE (HIGH). Please update your configuration." + #error "SDCARDDETECTINVERTED is now SD_DETECT_STATE (HIGH)." #elif defined(SD_DETECT_INVERTED) - #error "SD_DETECT_INVERTED is now SD_DETECT_STATE (HIGH). Please update your configuration." + #error "SD_DETECT_INVERTED is now SD_DETECT_STATE (HIGH)." #elif defined(BTENABLED) - #error "BTENABLED is now BLUETOOTH. Please update your configuration." + #error "BTENABLED is now BLUETOOTH." #elif defined(CUSTOM_MENDEL_NAME) - #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration." + #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME." #elif defined(HAS_AUTOMATIC_VERSIONING) - #error "HAS_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration." + #error "HAS_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE." #elif defined(USE_AUTOMATIC_VERSIONING) - #error "USE_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration." + #error "USE_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE." #elif defined(SDSLOW) #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead." #elif defined(SDEXTRASLOW) #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." #elif defined(FILAMENT_SENSOR) - #error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR. Please update your configuration." + #error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR." #elif defined(ENDSTOPPULLUP_FIL_RUNOUT) - #error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULL. Please update your configuration." + #error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULL." #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead." #elif defined(LANGUAGE_INCLUDE) - #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration." + #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE." #elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y) #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." #elif defined(PID_PARAMS_PER_EXTRUDER) #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." #elif defined(EXTRUDER_WATTS) || defined(BED_WATTS) - #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration." + #error "EXTRUDER_WATTS and BED_WATTS are deprecated and should be removed." #elif defined(SERVO_ENDSTOP_ANGLES) #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead." #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR) #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed." #elif defined(Z_ENDSTOP_SERVO_NR) - #error "Z_ENDSTOP_SERVO_NR is now Z_PROBE_SERVO_NR. Please update your configuration." + #error "Z_ENDSTOP_SERVO_NR is now Z_PROBE_SERVO_NR." #elif defined(DEFAULT_XYJERK) #error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead." #elif defined(XY_TRAVEL_SPEED) @@ -135,57 +135,57 @@ #elif defined(PROBE_SERVO_DEACTIVATION_DELAY) #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead." #elif defined(SERVO_DEACTIVATION_DELAY) - #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." + #error "SERVO_DEACTIVATION_DELAY is now SERVO_DELAY." #elif ENABLED(FILAMENTCHANGEENABLE) - #error "FILAMENTCHANGEENABLE is now ADVANCED_PAUSE_FEATURE. Please update your configuration." + #error "FILAMENTCHANGEENABLE is now ADVANCED_PAUSE_FEATURE." #elif ENABLED(FILAMENT_CHANGE_FEATURE) - #error "FILAMENT_CHANGE_FEATURE is now ADVANCED_PAUSE_FEATURE. Please update your configuration." + #error "FILAMENT_CHANGE_FEATURE is now ADVANCED_PAUSE_FEATURE." #elif defined(FILAMENT_CHANGE_X_POS) || defined(FILAMENT_CHANGE_Y_POS) - #error "FILAMENT_CHANGE_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration." + #error "FILAMENT_CHANGE_[XY]_POS is now set with NOZZLE_PARK_POINT." #elif defined(FILAMENT_CHANGE_Z_ADD) - #error "FILAMENT_CHANGE_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration." + #error "FILAMENT_CHANGE_Z_ADD is now set with NOZZLE_PARK_POINT." #elif defined(FILAMENT_CHANGE_XY_FEEDRATE) - #error "FILAMENT_CHANGE_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration." + #error "FILAMENT_CHANGE_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE." #elif defined(FILAMENT_CHANGE_Z_FEEDRATE) - #error "FILAMENT_CHANGE_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration." + #error "FILAMENT_CHANGE_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE." #elif defined(PAUSE_PARK_X_POS) || defined(PAUSE_PARK_Y_POS) - #error "PAUSE_PARK_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration." + #error "PAUSE_PARK_[XY]_POS is now set with NOZZLE_PARK_POINT." #elif defined(PAUSE_PARK_Z_ADD) - #error "PAUSE_PARK_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration." + #error "PAUSE_PARK_Z_ADD is now set with NOZZLE_PARK_POINT." #elif defined(PAUSE_PARK_XY_FEEDRATE) - #error "PAUSE_PARK_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration." + #error "PAUSE_PARK_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE." #elif defined(PAUSE_PARK_Z_FEEDRATE) - #error "PAUSE_PARK_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration." + #error "PAUSE_PARK_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE." #elif defined(FILAMENT_CHANGE_RETRACT_FEEDRATE) - #error "FILAMENT_CHANGE_RETRACT_FEEDRATE is now PAUSE_PARK_RETRACT_FEEDRATE. Please update your configuration." + #error "FILAMENT_CHANGE_RETRACT_FEEDRATE is now PAUSE_PARK_RETRACT_FEEDRATE." #elif defined(FILAMENT_CHANGE_RETRACT_LENGTH) - #error "FILAMENT_CHANGE_RETRACT_LENGTH is now PAUSE_PARK_RETRACT_LENGTH. Please update your configuration." + #error "FILAMENT_CHANGE_RETRACT_LENGTH is now PAUSE_PARK_RETRACT_LENGTH." #elif defined(FILAMENT_CHANGE_EXTRUDE_FEEDRATE) - #error "FILAMENT_CHANGE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration." + #error "FILAMENT_CHANGE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE." #elif defined(ADVANCED_PAUSE_EXTRUDE_FEEDRATE) - #error "ADVANCED_PAUSE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration." + #error "ADVANCED_PAUSE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE." #elif defined(FILAMENT_CHANGE_EXTRUDE_LENGTH) - #error "FILAMENT_CHANGE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration." + #error "FILAMENT_CHANGE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH." #elif defined(ADVANCED_PAUSE_EXTRUDE_LENGTH) - #error "ADVANCED_PAUSE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration." + #error "ADVANCED_PAUSE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH." #elif defined(FILAMENT_CHANGE_NOZZLE_TIMEOUT) - #error "FILAMENT_CHANGE_NOZZLE_TIMEOUT is now PAUSE_PARK_NOZZLE_TIMEOUT. Please update your configuration." + #error "FILAMENT_CHANGE_NOZZLE_TIMEOUT is now PAUSE_PARK_NOZZLE_TIMEOUT." #elif defined(FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS) - #error "FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS is now FILAMENT_CHANGE_ALERT_BEEPS. Please update your configuration." + #error "FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS is now FILAMENT_CHANGE_ALERT_BEEPS." #elif defined(FILAMENT_CHANGE_NO_STEPPER_TIMEOUT) - #error "FILAMENT_CHANGE_NO_STEPPER_TIMEOUT is now PAUSE_PARK_NO_STEPPER_TIMEOUT. Please update your configuration." + #error "FILAMENT_CHANGE_NO_STEPPER_TIMEOUT is now PAUSE_PARK_NO_STEPPER_TIMEOUT." #elif defined(PLA_PREHEAT_HOTEND_TEMP) - #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration." + #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND." #elif defined(PLA_PREHEAT_HPB_TEMP) - #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration." + #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED." #elif defined(PLA_PREHEAT_FAN_SPEED) - #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration." + #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED." #elif defined(ABS_PREHEAT_HOTEND_TEMP) - #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration." + #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND." #elif defined(ABS_PREHEAT_HPB_TEMP) - #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration." + #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED." #elif defined(ABS_PREHEAT_FAN_SPEED) - #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration." + #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED." #elif defined(ENDSTOPS_ONLY_FOR_HOMING) #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead." #elif defined(HOMING_FEEDRATE) @@ -193,111 +193,111 @@ #elif defined(MANUAL_HOME_POSITIONS) #error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead." #elif defined(PID_ADD_EXTRUSION_RATE) - #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration." + #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default." #elif defined(Z_RAISE_BEFORE_HOMING) - #error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration." + #error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT." #elif defined(MIN_Z_HEIGHT_FOR_HOMING) - #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration." + #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT." #elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING) #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE and Z_AFTER_PROBING instead." #elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS) - #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration." + #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES." #elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT) - #error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration." + #error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES." #elif defined(MANUAL_BED_LEVELING) - #error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING. Please update your configuration." + #error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING." #elif defined(MESH_HOME_SEARCH_Z) - #error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE. Please update your configuration." + #error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE." #elif defined(MANUAL_PROBE_Z_RANGE) - #error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration." + #error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE." #elif !defined(MIN_STEPS_PER_SEGMENT) - #error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h. + #error "Please replace 'const int dropsegments' with '#define MIN_STEPS_PER_SEGMENT' (and increase by 1)." #elif MIN_STEPS_PER_SEGMENT <= 0 - #error "MIN_STEPS_PER_SEGMENT must be at least 1. Please update your Configuration_adv.h." + #error "MIN_STEPS_PER_SEGMENT must be at least 1." #elif defined(PREVENT_DANGEROUS_EXTRUDE) - #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration." + #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION." #elif defined(SCARA) - #error "SCARA is now MORGAN_SCARA. Please update your configuration." + #error "SCARA is now MORGAN_SCARA." #elif defined(ENABLE_AUTO_BED_LEVELING) #error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT." #elif defined(AUTO_BED_LEVELING_FEATURE) #error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT." #elif defined(ABL_GRID_POINTS) - #error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y. Please update your configuration." + #error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y." #elif defined(ABL_GRID_POINTS_X) || defined(ABL_GRID_POINTS_Y) - #error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration." + #error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]." #elif defined(ABL_GRID_MAX_POINTS_X) || defined(ABL_GRID_MAX_POINTS_Y) - #error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration." + #error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]." #elif defined(MESH_NUM_X_POINTS) || defined(MESH_NUM_Y_POINTS) - #error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration." + #error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]." #elif defined(UBL_MESH_NUM_X_POINTS) || defined(UBL_MESH_NUM_Y_POINTS) - #error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration." + #error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]." #elif defined(UBL_G26_MESH_VALIDATION) - #error "UBL_G26_MESH_VALIDATION is now G26_MESH_VALIDATION. Please update your configuration." + #error "UBL_G26_MESH_VALIDATION is now G26_MESH_VALIDATION." #elif defined(UBL_MESH_EDIT_ENABLED) - #error "UBL_MESH_EDIT_ENABLED is now G26_MESH_VALIDATION. Please update your configuration." + #error "UBL_MESH_EDIT_ENABLED is now G26_MESH_VALIDATION." #elif defined(UBL_MESH_EDITING) - #error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration." + #error "UBL_MESH_EDITING is now G26_MESH_VALIDATION." #elif defined(BLTOUCH_HEATERS_OFF) - #error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration." + #error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF." #elif defined(BLTOUCH_V3) - #error "BLTOUCH_V3 is obsolete. Please update your configuration." + #error "BLTOUCH_V3 is obsolete." #elif defined(BLTOUCH_FORCE_OPEN_DRAIN_MODE) - #error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete. Please update your configuration." + #error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete." #elif defined(BEEPER) - #error "BEEPER is now BEEPER_PIN. Please update your pins definitions." + #error "BEEPER is now BEEPER_PIN." #elif defined(SDCARDDETECT) - #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions." + #error "SDCARDDETECT is now SD_DETECT_PIN." #elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE) - #error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions." + #error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN." #elif defined(LCD_PIN_BL) - #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions." + #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN." #elif defined(LCD_PIN_RESET) - #error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions." + #error "LCD_PIN_RESET is now LCD_RESET_PIN." #elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN) - #error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h." + #error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN." #elif defined(PID_FAN_SCALING) && !HAS_FAN #error "PID_FAN_SCALING needs at least one fan enabled." #elif defined(min_software_endstops) || defined(max_software_endstops) - #error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration." + #error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS." #elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN) #error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)." #elif defined(CONTROLLERFAN_PIN) - #error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h." + #error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN." #elif defined(CONTROLLERFAN_SPEED) - #error "CONTROLLERFAN_SPEED is now CONTROLLERFAN_SPEED_ACTIVE. Please update your Configuration_adv.h." + #error "CONTROLLERFAN_SPEED is now CONTROLLERFAN_SPEED_ACTIVE." #elif defined(CONTROLLERFAN_SECS) - #error "CONTROLLERFAN_SECS is now CONTROLLERFAN_IDLE_TIME. Please update your Configuration_adv.h." + #error "CONTROLLERFAN_SECS is now CONTROLLERFAN_IDLE_TIME." #elif defined(MIN_RETRACT) - #error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT. Please update your Configuration_adv.h." + #error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT." #elif defined(ADVANCE) - #error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE." + #error "ADVANCE is now LIN_ADVANCE." #elif defined(LIN_ADVANCE_E_D_RATIO) - #error "LIN_ADVANCE (1.5) no longer uses LIN_ADVANCE_E_D_RATIO. Check your configuration." + #error "LIN_ADVANCE (1.5) no longer uses LIN_ADVANCE_E_D_RATIO." #elif defined(NEOPIXEL_RGBW_LED) - #error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED. Please update your configuration." + #error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED." #elif ENABLED(DELTA) && defined(DELTA_PROBEABLE_RADIUS) #error "Remove DELTA_PROBEABLE_RADIUS and use PROBING_MARGIN to inset the probe area instead." #elif ENABLED(DELTA) && defined(DELTA_CALIBRATION_RADIUS) #error "Remove DELTA_CALIBRATION_RADIUS and use PROBING_MARGIN to inset the probe area instead." #elif defined(UBL_MESH_INSET) - #error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration." + #error "UBL_MESH_INSET is now just MESH_INSET." #elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y) - #error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration." + #error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]." #elif defined(ABL_PROBE_PT_1_X) || defined(ABL_PROBE_PT_1_Y) || defined(ABL_PROBE_PT_2_X) || defined(ABL_PROBE_PT_2_Y) || defined(ABL_PROBE_PT_3_X) || defined(ABL_PROBE_PT_3_Y) - #error "ABL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h." + #error "ABL_PROBE_PT_[123]_[XY] is no longer required. Please remove it." #elif defined(UBL_PROBE_PT_1_X) || defined(UBL_PROBE_PT_1_Y) || defined(UBL_PROBE_PT_2_X) || defined(UBL_PROBE_PT_2_Y) || defined(UBL_PROBE_PT_3_X) || defined(UBL_PROBE_PT_3_Y) - #error "UBL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h." + #error "UBL_PROBE_PT_[123]_[XY] is no longer required. Please remove it." #elif defined(MIN_PROBE_EDGE) - #error "MIN_PROBE_EDGE is now called PROBING_MARGIN. Please update your configuration." + #error "MIN_PROBE_EDGE is now called PROBING_MARGIN." #elif defined(MIN_PROBE_EDGE_LEFT) - #error "MIN_PROBE_EDGE_LEFT is now called PROBING_MARGIN_LEFT. Please update your configuration." + #error "MIN_PROBE_EDGE_LEFT is now called PROBING_MARGIN_LEFT." #elif defined(MIN_PROBE_EDGE_RIGHT) - #error "MIN_PROBE_EDGE_RIGHT is now called PROBING_MARGIN_RIGHT. Please update your configuration." + #error "MIN_PROBE_EDGE_RIGHT is now called PROBING_MARGIN_RIGHT." #elif defined(MIN_PROBE_EDGE_FRONT) - #error "MIN_PROBE_EDGE_FRONT is now called PROBING_MARGIN_FRONT. Please update your configuration." + #error "MIN_PROBE_EDGE_FRONT is now called PROBING_MARGIN_FRONT." #elif defined(MIN_PROBE_EDGE_BACK) - #error "MIN_PROBE_EDGE_BACK is now called PROBING_MARGIN_BACK. Please update your configuration." + #error "MIN_PROBE_EDGE_BACK is now called PROBING_MARGIN_BACK." #elif defined(LEFT_PROBE_BED_POSITION) #error "LEFT_PROBE_BED_POSITION is obsolete. Set a margin with PROBING_MARGIN or PROBING_MARGIN_LEFT instead." #elif defined(RIGHT_PROBE_BED_POSITION) @@ -307,243 +307,229 @@ #elif defined(BACK_PROBE_BED_POSITION) #error "BACK_PROBE_BED_POSITION is obsolete. Set a margin with PROBING_MARGIN or PROBING_MARGIN_BACK instead." #elif defined(ENABLE_MESH_EDIT_GFX_OVERLAY) - #error "ENABLE_MESH_EDIT_GFX_OVERLAY is now MESH_EDIT_GFX_OVERLAY. Please update your configuration." + #error "ENABLE_MESH_EDIT_GFX_OVERLAY is now MESH_EDIT_GFX_OVERLAY." #elif defined(BABYSTEP_ZPROBE_GFX_REVERSE) - #error "BABYSTEP_ZPROBE_GFX_REVERSE is now set by OVERLAY_GFX_REVERSE. Please update your configurations." + #error "BABYSTEP_ZPROBE_GFX_REVERSE is now set by OVERLAY_GFX_REVERSE." #elif defined(UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN) - #error "UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN is now SEGMENT_LEVELED_MOVES. Please update your configuration." + #error "UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN is now SEGMENT_LEVELED_MOVES." #elif HAS_PID_HEATING && (defined(K1) || !defined(PID_K1)) - #error "K1 is now PID_K1. Please update your configuration." + #error "K1 is now PID_K1." #elif defined(PROBE_DOUBLE_TOUCH) - #error "PROBE_DOUBLE_TOUCH is now MULTIPLE_PROBING. Please update your configuration." + #error "PROBE_DOUBLE_TOUCH is now MULTIPLE_PROBING." #elif defined(ANET_KEYPAD_LCD) - #error "ANET_KEYPAD_LCD is now ZONESTAR_LCD. Please update your configuration." + #error "ANET_KEYPAD_LCD is now ZONESTAR_LCD." #elif defined(LCD_I2C_SAINSMART_YWROBOT) - #error "LCD_I2C_SAINSMART_YWROBOT is now LCD_SAINSMART_I2C_(1602|2004). Please update your configuration." + #error "LCD_I2C_SAINSMART_YWROBOT is now LCD_SAINSMART_I2C_(1602|2004)." #elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT) - #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration." + #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN." #elif defined(HAVE_TMCDRIVER) - #error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." + #error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X." #elif defined(STEALTHCHOP) - #error "STEALTHCHOP is now STEALTHCHOP_(XY|Z|E). Please update your Configuration_adv.h." + #error "STEALTHCHOP is now STEALTHCHOP_(XY|Z|E)." #elif defined(HAVE_TMC26X) - #error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." + #error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X." #elif defined(HAVE_TMC2130) - #error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h." + #error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130." #elif defined(HAVE_TMC2208) - #error "HAVE_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h." + #error "HAVE_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208." #elif defined(HAVE_L6470DRIVER) - #error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." + #error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470." #elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \ || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC) || defined(E6_IS_TMC) || defined(E7_IS_TMC) - #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." + #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X." #elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) || defined(Z3_IS_TMC26X) \ || defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X) || defined(E6_IS_TMC26X) || defined(E7_IS_TMC26X) - #error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." + #error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X." #elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) || defined(Z3_IS_TMC2130) \ || defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130) || defined(E6_IS_TMC2130) || defined(E7_IS_TMC2130) - #error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h." + #error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130." #elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \ || defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208) || defined(E6_IS_TMC2208) || defined(E7_IS_TMC2208) - #error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h." + #error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208." #elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \ || defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470) || defined(E6_IS_L6470) || defined(E7_IS_L6470) - #error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." + #error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470." #elif defined(AUTOMATIC_CURRENT_CONTROL) - #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration." + #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS." #elif defined(FILAMENT_CHANGE_LOAD_LENGTH) - #error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration." + #error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH." #elif defined(LEVEL_CORNERS_INSET) - #error "LEVEL_CORNERS_INSET is now LEVEL_CORNERS_INSET_LFRB . Please update your Configuration.h." + #error "LEVEL_CORNERS_INSET is now LEVEL_CORNERS_INSET_LFRB." #elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET_LFRB) - #error "LEVEL_BED_CORNERS requires LEVEL_CORNERS_INSET_LFRB values. Please update your Configuration.h." + #error "LEVEL_BED_CORNERS requires LEVEL_CORNERS_INSET_LFRB values." #elif defined(BEZIER_JERK_CONTROL) - #error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION. Please update your configuration." + #error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION." #elif HAS_JUNCTION_DEVIATION && defined(JUNCTION_DEVIATION_FACTOR) - #error "JUNCTION_DEVIATION_FACTOR is now JUNCTION_DEVIATION_MM. Please update your configuration." + #error "JUNCTION_DEVIATION_FACTOR is now JUNCTION_DEVIATION_MM." #elif defined(JUNCTION_ACCELERATION_FACTOR) #error "JUNCTION_ACCELERATION_FACTOR is obsolete. Delete it from Configuration_adv.h." #elif defined(JUNCTION_ACCELERATION) #error "JUNCTION_ACCELERATION is obsolete. Delete it from Configuration_adv.h." #elif defined(MAX7219_DEBUG_STEPPER_HEAD) - #error "MAX7219_DEBUG_STEPPER_HEAD is now MAX7219_DEBUG_PLANNER_HEAD. Please update your configuration." + #error "MAX7219_DEBUG_STEPPER_HEAD is now MAX7219_DEBUG_PLANNER_HEAD." #elif defined(MAX7219_DEBUG_STEPPER_TAIL) - #error "MAX7219_DEBUG_STEPPER_TAIL is now MAX7219_DEBUG_PLANNER_TAIL. Please update your configuration." + #error "MAX7219_DEBUG_STEPPER_TAIL is now MAX7219_DEBUG_PLANNER_TAIL." #elif defined(MAX7219_DEBUG_STEPPER_QUEUE) - #error "MAX7219_DEBUG_STEPPER_QUEUE is now MAX7219_DEBUG_PLANNER_QUEUE. Please update your configuration." + #error "MAX7219_DEBUG_STEPPER_QUEUE is now MAX7219_DEBUG_PLANNER_QUEUE." #elif defined(ENDSTOP_NOISE_FILTER) - #error "ENDSTOP_NOISE_FILTER is now ENDSTOP_NOISE_THRESHOLD [2-7]. Please update your configuration." + #error "ENDSTOP_NOISE_FILTER is now ENDSTOP_NOISE_THRESHOLD [2-7]." #elif defined(RETRACT_ZLIFT) - #error "RETRACT_ZLIFT is now RETRACT_ZRAISE. Please update your Configuration_adv.h." + #error "RETRACT_ZLIFT is now RETRACT_ZRAISE." #elif defined(TOOLCHANGE_PARK_ZLIFT) || defined(TOOLCHANGE_UNPARK_ZLIFT) - #error "TOOLCHANGE_PARK_ZLIFT and TOOLCHANGE_UNPARK_ZLIFT are now TOOLCHANGE_ZRAISE. Please update your configuration." + #error "TOOLCHANGE_PARK_ZLIFT and TOOLCHANGE_UNPARK_ZLIFT are now TOOLCHANGE_ZRAISE." #elif defined(SINGLENOZZLE_TOOLCHANGE_ZRAISE) - #error "SINGLENOZZLE_TOOLCHANGE_ZRAISE is now TOOLCHANGE_ZRAISE. Please update your configuration." + #error "SINGLENOZZLE_TOOLCHANGE_ZRAISE is now TOOLCHANGE_ZRAISE." #elif defined(SINGLENOZZLE_SWAP_LENGTH) - #error "SINGLENOZZLE_SWAP_LENGTH is now TOOLCHANGE_FIL_SWAP_LENGTH. Please update your configuration." + #error "SINGLENOZZLE_SWAP_LENGTH is now TOOLCHANGE_FIL_SWAP_LENGTH." #elif defined(SINGLENOZZLE_SWAP_RETRACT_SPEED) - #error "SINGLENOZZLE_SWAP_RETRACT_SPEED is now TOOLCHANGE_FIL_SWAP_RETRACT_SPEED. Please update your configuration." + #error "SINGLENOZZLE_SWAP_RETRACT_SPEED is now TOOLCHANGE_FIL_SWAP_RETRACT_SPEED." #elif defined(SINGLENOZZLE_SWAP_PRIME_SPEED) - #error "SINGLENOZZLE_SWAP_PRIME_SPEED is now TOOLCHANGE_FIL_SWAP_PRIME_SPEED. Please update your configuration." + #error "SINGLENOZZLE_SWAP_PRIME_SPEED is now TOOLCHANGE_FIL_SWAP_PRIME_SPEED." #elif defined(SINGLENOZZLE_SWAP_PARK) - #error "SINGLENOZZLE_SWAP_PARK is now TOOLCHANGE_PARK. Please update your configuration." + #error "SINGLENOZZLE_SWAP_PARK is now TOOLCHANGE_PARK." #elif defined(SINGLENOZZLE_TOOLCHANGE_XY) - #error "SINGLENOZZLE_TOOLCHANGE_XY is now TOOLCHANGE_PARK_XY. Please update your configuration." + #error "SINGLENOZZLE_TOOLCHANGE_XY is now TOOLCHANGE_PARK_XY." #elif defined(SINGLENOZZLE_PARK_XY_FEEDRATE) - #error "SINGLENOZZLE_PARK_XY_FEEDRATE is now TOOLCHANGE_PARK_XY_FEEDRATE. Please update your configuration." + #error "SINGLENOZZLE_PARK_XY_FEEDRATE is now TOOLCHANGE_PARK_XY_FEEDRATE." #elif defined(PARKING_EXTRUDER_SECURITY_RAISE) - #error "PARKING_EXTRUDER_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration." + #error "PARKING_EXTRUDER_SECURITY_RAISE is now TOOLCHANGE_ZRAISE." #elif defined(SWITCHING_TOOLHEAD_SECURITY_RAISE) - #error "SWITCHING_TOOLHEAD_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration." + #error "SWITCHING_TOOLHEAD_SECURITY_RAISE is now TOOLCHANGE_ZRAISE." #elif defined(G0_FEEDRATE) && G0_FEEDRATE == 0 - #error "G0_FEEDRATE is now used to set the G0 feedrate. Please update your configuration." + #error "G0_FEEDRATE is now used to set the G0 feedrate." #elif defined(MBL_Z_STEP) - #error "MBL_Z_STEP is now MESH_EDIT_Z_STEP. Please update your configuration." + #error "MBL_Z_STEP is now MESH_EDIT_Z_STEP." #elif defined(CHDK) - #error "CHDK is now CHDK_PIN. Please update your Configuration_adv.h." -#elif defined(MAX6675_SS) - #error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins." -#elif defined(MAX6675_SS2) - #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins." + #error "CHDK is now CHDK_PIN." +#elif defined(MAX6675_SS) || defined(MAX6675_SS2) + #error "MAX6675_SS / MAX6675_SS2 is now MAX6675_SS_PIN / MAX6675_SS2_PIN." #elif defined(MAX31865_SENSOR_OHMS) - #error "MAX31865_SENSOR_OHMS is now MAX31865_SENSOR_OHMS_0. Please update your configuration." + #error "MAX31865_SENSOR_OHMS is now MAX31865_SENSOR_OHMS_0." #elif defined(MAX31865_CALIBRATION_OHMS) - #error "MAX31865_CALIBRATION_OHMS is now MAX31865_CALIBRATION_OHMS_0. Please update your configuration." + #error "MAX31865_CALIBRATION_OHMS is now MAX31865_CALIBRATION_OHMS_0." #elif defined(SPINDLE_LASER_ENABLE) - #error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE. Please update your Configuration_adv.h." + #error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE." #elif defined(SPINDLE_LASER_ENABLE_PIN) - #error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your Configuration_adv.h and/or pins." + #error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN." #elif defined(SPINDLE_DIR_CHANGE) - #error "SPINDLE_DIR_CHANGE is now SPINDLE_CHANGE_DIR. Please update your Configuration_adv.h." + #error "SPINDLE_DIR_CHANGE is now SPINDLE_CHANGE_DIR." #elif defined(SPINDLE_STOP_ON_DIR_CHANGE) - #error "SPINDLE_STOP_ON_DIR_CHANGE is now SPINDLE_CHANGE_DIR_STOP. Please update your Configuration_adv.h." + #error "SPINDLE_STOP_ON_DIR_CHANGE is now SPINDLE_CHANGE_DIR_STOP." #elif defined(SPINDLE_LASER_ACTIVE_HIGH) - #error "SPINDLE_LASER_ACTIVE_HIGH is now SPINDLE_LASER_ACTIVE_STATE. Please update your Configuration_adv.h." + #error "SPINDLE_LASER_ACTIVE_HIGH is now SPINDLE_LASER_ACTIVE_STATE." #elif defined(SPINDLE_LASER_ENABLE_INVERT) - #error "SPINDLE_LASER_ENABLE_INVERT is now SPINDLE_LASER_ACTIVE_STATE. Please update your Configuration_adv.h." + #error "SPINDLE_LASER_ENABLE_INVERT is now SPINDLE_LASER_ACTIVE_STATE." #elif defined(CUTTER_POWER_DISPLAY) - #error "CUTTER_POWER_DISPLAY is now CUTTER_POWER_UNIT. Please update your Configuration_adv.h." + #error "CUTTER_POWER_DISPLAY is now CUTTER_POWER_UNIT." #elif defined(CHAMBER_HEATER_PIN) - #error "CHAMBER_HEATER_PIN is now HEATER_CHAMBER_PIN. Please update your configuration and/or pins." + #error "CHAMBER_HEATER_PIN is now HEATER_CHAMBER_PIN." #elif defined(TMC_Z_CALIBRATION) - #error "TMC_Z_CALIBRATION has been deprecated in favor of MECHANICAL_GANTRY_CALIBRATION. Please update your configuration." + #error "TMC_Z_CALIBRATION has been deprecated in favor of MECHANICAL_GANTRY_CALIBRATION." #elif defined(Z_MIN_PROBE_ENDSTOP) - #error "Z_MIN_PROBE_ENDSTOP is no longer required. Please remove it from Configuration.h." + #error "Z_MIN_PROBE_ENDSTOP is no longer required. Please remove it." #elif defined(DUAL_NOZZLE_DUPLICATION_MODE) - #error "DUAL_NOZZLE_DUPLICATION_MODE is now MULTI_NOZZLE_DUPLICATION. Please update your configuration." + #error "DUAL_NOZZLE_DUPLICATION_MODE is now MULTI_NOZZLE_DUPLICATION." #elif defined(MENU_ITEM_CASE_LIGHT) - #error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration." + #error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU." #elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) - #error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h." + #error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT." #elif defined(LPC_SD_LCD) || defined(LPC_SD_ONBOARD) || defined(LPC_SD_CUSTOM_CABLE) - #error "LPC_SD_(LCD|ONBOARD|CUSTOM_CABLE) are now SDCARD_CONNECTION. Please update your Configuration_adv.h." + #error "LPC_SD_(LCD|ONBOARD|CUSTOM_CABLE) are now SDCARD_CONNECTION." #elif defined(USB_SD_DISABLED) - #error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h." + #error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE." #elif defined(USB_SD_ONBOARD) #error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead." #elif defined(PSU_ACTIVE_HIGH) - #error "PSU_ACTIVE_HIGH is now PSU_ACTIVE_STATE. Please update your configuration." + #error "PSU_ACTIVE_HIGH is now PSU_ACTIVE_STATE." #elif POWER_SUPPLY == 1 #error "Replace POWER_SUPPLY 1 by enabling PSU_CONTROL and setting PSU_ACTIVE_STATE to 'LOW'." #elif POWER_SUPPLY == 2 #error "Replace POWER_SUPPLY 2 by enabling PSU_CONTROL and setting PSU_ACTIVE_STATE to 'HIGH'." #elif defined(POWER_SUPPLY) - #error "POWER_SUPPLY is now obsolete. Please remove it from Configuration.h." + #error "POWER_SUPPLY is now obsolete. Please remove it." #elif defined(MKS_ROBIN_TFT) - #error "MKS_ROBIN_TFT is now FSMC_GRAPHICAL_TFT. Please update your configuration." + #error "MKS_ROBIN_TFT is now FSMC_GRAPHICAL_TFT." #elif defined(SDPOWER) - #error "SDPOWER is now SDPOWER_PIN. Please update your configuration and/or pins." + #error "SDPOWER is now SDPOWER_PIN." #elif defined(STRING_SPLASH_LINE1) || defined(STRING_SPLASH_LINE2) - #error "STRING_SPLASH_LINE[12] are now obsolete. Please remove them from Configuration.h." + #error "STRING_SPLASH_LINE[12] are now obsolete. Please remove them." #elif defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_X) || defined(Z_PROBE_ALLEN_KEY_STOW_1_X) - #error "Z_PROBE_ALLEN_KEY_(DEPLOY|STOW) coordinates are now a single setting. Please update your configuration." + #error "Z_PROBE_ALLEN_KEY_(DEPLOY|STOW) coordinates are now a single setting." #elif defined(X_PROBE_OFFSET_FROM_EXTRUDER) || defined(Y_PROBE_OFFSET_FROM_EXTRUDER) || defined(Z_PROBE_OFFSET_FROM_EXTRUDER) - #error "[XYZ]_PROBE_OFFSET_FROM_EXTRUDER is now NOZZLE_TO_PROBE_OFFSET. Please update your configuration." + #error "[XYZ]_PROBE_OFFSET_FROM_EXTRUDER is now NOZZLE_TO_PROBE_OFFSET." #elif defined(MIN_PROBE_X) || defined(MIN_PROBE_Y) || defined(MAX_PROBE_X) || defined(MAX_PROBE_Y) - #error "(MIN|MAX)_PROBE_[XY] are now calculated at runtime. Please remove them from Configuration.h." + #error "(MIN|MAX)_PROBE_[XY] are now calculated at runtime. Please remove them." #elif defined(Z_STEPPER_ALIGN_X) || defined(Z_STEPPER_ALIGN_X) - #error "Z_STEPPER_ALIGN_X and Z_STEPPER_ALIGN_Y are now combined as Z_STEPPER_ALIGN_XY. Please update your Configuration_adv.h." + #error "Z_STEPPER_ALIGN_X and Z_STEPPER_ALIGN_Y are now combined as Z_STEPPER_ALIGN_XY." #elif defined(JUNCTION_DEVIATION) - #error "JUNCTION_DEVIATION is no longer required. (See CLASSIC_JERK). Please remove it from Configuration.h." + #error "JUNCTION_DEVIATION is no longer required. (See CLASSIC_JERK). Please remove it." #elif defined(BABYSTEP_MULTIPLICATOR) - #error "BABYSTEP_MULTIPLICATOR is now BABYSTEP_MULTIPLICATOR_[XY|Z]. Please update Configuration_adv.h." + #error "BABYSTEP_MULTIPLICATOR is now BABYSTEP_MULTIPLICATOR_[XY|Z]." #elif defined(LULZBOT_TOUCH_UI) - #error "LULZBOT_TOUCH_UI is now TOUCH_UI_FTDI_EVE. Please update your configuration." + #error "LULZBOT_TOUCH_UI is now TOUCH_UI_FTDI_EVE." #elif defined(PS_DEFAULT_OFF) - #error "PS_DEFAULT_OFF is now PSU_DEFAULT_OFF. Please update your configuration." + #error "PS_DEFAULT_OFF is now PSU_DEFAULT_OFF." #elif defined(FILAMENT_UNLOAD_RETRACT_LENGTH) - #error "FILAMENT_UNLOAD_RETRACT_LENGTH is now FILAMENT_UNLOAD_PURGE_RETRACT. Please update Configuration_adv.h." + #error "FILAMENT_UNLOAD_RETRACT_LENGTH is now FILAMENT_UNLOAD_PURGE_RETRACT." #elif defined(FILAMENT_UNLOAD_DELAY) - #error "FILAMENT_UNLOAD_DELAY is now FILAMENT_UNLOAD_PURGE_DELAY. Please update Configuration_adv.h." + #error "FILAMENT_UNLOAD_DELAY is now FILAMENT_UNLOAD_PURGE_DELAY." #elif defined(HOME_USING_SPREADCYCLE) - #error "HOME_USING_SPREADCYCLE is now obsolete. Please remove it from Configuration_adv.h." + #error "HOME_USING_SPREADCYCLE is now obsolete. Please remove it." #elif defined(DGUS_LCD) - #error "DGUS_LCD is now DGUS_LCD_UI_(ORIGIN|FYSETC|HIPRECY). Please update your configuration." + #error "DGUS_LCD is now DGUS_LCD_UI_(ORIGIN|FYSETC|HIPRECY)." #elif defined(DGUS_SERIAL_PORT) - #error "DGUS_SERIAL_PORT is now LCD_SERIAL_PORT. Please update your configuration." + #error "DGUS_SERIAL_PORT is now LCD_SERIAL_PORT." #elif defined(DGUS_BAUDRATE) - #error "DGUS_BAUDRATE is now LCD_BAUDRATE. Please update your configuration." + #error "DGUS_BAUDRATE is now LCD_BAUDRATE." #elif defined(DGUS_STATS_RX_BUFFER_OVERRUNS) - #error "DGUS_STATS_RX_BUFFER_OVERRUNS is now STATS_RX_BUFFER_OVERRUNS. Please update your configuration." -#elif defined(DGUS_SERIAL_PORT) - #error "DGUS_SERIAL_PORT is now LCD_SERIAL_PORT. Please update your configuration." + #error "DGUS_STATS_RX_BUFFER_OVERRUNS is now STATS_RX_BUFFER_OVERRUNS." #elif defined(ANYCUBIC_LCD_SERIAL_PORT) - #error "ANYCUBIC_LCD_SERIAL_PORT is now LCD_SERIAL_PORT. Please update your configuration." + #error "ANYCUBIC_LCD_SERIAL_PORT is now LCD_SERIAL_PORT." #elif defined(INTERNAL_SERIAL_PORT) - #error "INTERNAL_SERIAL_PORT is now MMU2_SERIAL_PORT. Please update your configuration." -#elif defined(X_DUAL_ENDSTOPS_ADJUSTMENT) - #error "X_DUAL_ENDSTOPS_ADJUSTMENT is now X2_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h." -#elif defined(Y_DUAL_ENDSTOPS_ADJUSTMENT) - #error "Y_DUAL_ENDSTOPS_ADJUSTMENT is now Y2_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h." -#elif defined(Z_DUAL_ENDSTOPS_ADJUSTMENT) - #error "Z_DUAL_ENDSTOPS_ADJUSTMENT is now Z2_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h." + #error "INTERNAL_SERIAL_PORT is now MMU2_SERIAL_PORT." +#elif defined(X_DUAL_ENDSTOPS_ADJUSTMENT) || defined(Y_DUAL_ENDSTOPS_ADJUSTMENT) || defined(Z_DUAL_ENDSTOPS_ADJUSTMENT) + #error "[XYZ]_DUAL_ENDSTOPS_ADJUSTMENT is now [XYZ]2_ENDSTOP_ADJUSTMENT." #elif defined(Z_TRIPLE_ENDSTOPS_ADJUSTMENT2) || defined(Z_TRIPLE_ENDSTOPS_ADJUSTMENT3) - #error "Z_TRIPLE_ENDSTOPS_ADJUSTMENT[23] is now Z[23]_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h." + #error "Z_TRIPLE_ENDSTOPS_ADJUSTMENT[23] is now Z[23]_ENDSTOP_ADJUSTMENT." #elif defined(Z_QUAD_ENDSTOPS_ADJUSTMENT2) || defined(Z_QUAD_ENDSTOPS_ADJUSTMENT3) || defined(Z_QUAD_ENDSTOPS_ADJUSTMENT4) - #error "Z_QUAD_ENDSTOPS_ADJUSTMENT[234] is now Z[234]_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h." + #error "Z_QUAD_ENDSTOPS_ADJUSTMENT[234] is now Z[234]_ENDSTOP_ADJUSTMENT." #elif defined(Z_DUAL_STEPPER_DRIVERS) - #error "Z_DUAL_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 2. Please update Configuration_adv.h." + #error "Z_DUAL_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 2." #elif defined(Z_TRIPLE_STEPPER_DRIVERS) - #error "Z_TRIPLE_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 3. Please update Configuration_adv.h." + #error "Z_TRIPLE_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 3." #elif defined(Z_QUAD_STEPPER_DRIVERS) - #error "Z_QUAD_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 4. Please update Configuration_adv.h." -#elif defined(Z_DUAL_ENDSTOPS) - #error "Z_DUAL_ENDSTOPS is now Z_MULTI_ENDSTOPS. Please update Configuration_adv.h." -#elif defined(Z_TRIPLE_ENDSTOPS) - #error "Z_TRIPLE_ENDSTOPS is now Z_MULTI_ENDSTOPS. Please update Configuration_adv.h." -#elif defined(Z_QUAD_ENDSTOPS) - #error "Z_QUAD_ENDSTOPS is now Z_MULTI_ENDSTOPS. Please update Configuration_adv.h." + #error "Z_QUAD_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 4." +#elif defined(Z_DUAL_ENDSTOPS) || defined(Z_TRIPLE_ENDSTOPS) || defined(Z_QUAD_ENDSTOPS) + #error "Z_(DUAL|TRIPLE|QUAD)_ENDSTOPS is now Z_MULTI_ENDSTOPS." #elif defined(DUGS_UI_MOVE_DIS_OPTION) - #error "DUGS_UI_MOVE_DIS_OPTION is spelled DGUS_UI_MOVE_DIS_OPTION. Please update Configuration_adv.h." + #error "DUGS_UI_MOVE_DIS_OPTION is spelled DGUS_UI_MOVE_DIS_OPTION." #elif defined(ORIG_E0_AUTO_FAN_PIN) || defined(ORIG_E1_AUTO_FAN_PIN) || defined(ORIG_E2_AUTO_FAN_PIN) || defined(ORIG_E3_AUTO_FAN_PIN) || defined(ORIG_E4_AUTO_FAN_PIN) || defined(ORIG_E5_AUTO_FAN_PIN) || defined(ORIG_E6_AUTO_FAN_PIN) || defined(ORIG_E7_AUTO_FAN_PIN) - #error "ORIG_Ex_AUTO_FAN_PIN is now just Ex_AUTO_FAN_PIN. Make sure your pins are up to date." + #error "ORIG_Ex_AUTO_FAN_PIN is now just Ex_AUTO_FAN_PIN." #elif defined(ORIG_CHAMBER_AUTO_FAN_PIN) - #error "ORIG_CHAMBER_AUTO_FAN_PIN is now just CHAMBER_AUTO_FAN_PIN. Make sure your pins are up to date." + #error "ORIG_CHAMBER_AUTO_FAN_PIN is now just CHAMBER_AUTO_FAN_PIN." #elif defined(HOMING_BACKOFF_MM) - #error "HOMING_BACKOFF_MM is now HOMING_BACKOFF_POST_MM. Please update Configuration_adv.h." + #error "HOMING_BACKOFF_MM is now HOMING_BACKOFF_POST_MM." #elif defined(X_HOME_BUMP_MM) || defined(Y_HOME_BUMP_MM) || defined(Z_HOME_BUMP_MM) - #error "[XYZ]_HOME_BUMP_MM is now HOMING_BUMP_MM. Please update Configuration_adv.h." + #error "[XYZ]_HOME_BUMP_MM is now HOMING_BUMP_MM." #elif defined(DIGIPOT_I2C) - #error "DIGIPOT_I2C is now DIGIPOT_MCP4451 (or DIGIPOT_MCP4018). Please update Configuration_adv.h." + #error "DIGIPOT_I2C is now DIGIPOT_MCP4451 (or DIGIPOT_MCP4018)." #elif defined(TOUCH_BUTTONS) - #error "TOUCH_BUTTONS is now TOUCH_SCREEN. Please update your Configuration.h." -#elif defined(LCD_FULL_PIXEL_HEIGHT) - #error "LCD_FULL_PIXEL_HEIGHT is deprecated and should be removed. Please update your Configuration.h." -#elif defined(LCD_FULL_PIXEL_WIDTH) - #error "LCD_FULL_PIXEL_WIDTH is deprecated and should be removed. Please update your Configuration.h." + #error "TOUCH_BUTTONS is now TOUCH_SCREEN." +#elif defined(LCD_FULL_PIXEL_HEIGHT) || defined(LCD_FULL_PIXEL_WIDTH) + #error "LCD_FULL_PIXEL_(WIDTH|HEIGHT) is deprecated and should be removed." #elif defined(FSMC_UPSCALE) - #error "FSMC_UPSCALE is now GRAPHICAL_TFT_UPSCALE. Please update your Configuration.h." + #error "FSMC_UPSCALE is now GRAPHICAL_TFT_UPSCALE." #elif defined(ANYCUBIC_TFT_MODEL) - #error "ANYCUBIC_TFT_MODEL is now ANYCUBIC_LCD_I3MEGA. Please update your Configuration.h." + #error "ANYCUBIC_TFT_MODEL is now ANYCUBIC_LCD_I3MEGA." #elif defined(EVENT_GCODE_SD_STOP) - #error "EVENT_GCODE_SD_STOP is now EVENT_GCODE_SD_ABORT. Please update your Configuration.h." + #error "EVENT_GCODE_SD_STOP is now EVENT_GCODE_SD_ABORT." #elif defined(GRAPHICAL_TFT_ROTATE_180) - #error "GRAPHICAL_TFT_ROTATE_180 is now TFT_ROTATION set to TFT_ROTATE_180. Please update your Configuration.h." + #error "GRAPHICAL_TFT_ROTATE_180 is now TFT_ROTATION set to TFT_ROTATE_180." #elif defined(FIL_RUNOUT_INVERTING) #if FIL_RUNOUT_INVERTING - #error "FIL_RUNOUT_INVERTING true is now FIL_RUNOUT_STATE HIGH. Please update your Configuration.h." + #error "FIL_RUNOUT_INVERTING true is now FIL_RUNOUT_STATE HIGH." #else - #error "FIL_RUNOUT_INVERTING false is now FIL_RUNOUT_STATE LOW. Please update your Configuration.h." + #error "FIL_RUNOUT_INVERTING false is now FIL_RUNOUT_STATE LOW." #endif #endif @@ -552,11 +538,11 @@ */ #if ENABLED(PROBE_TEMP_COMPENSATION) #if defined(PTC_PARK_POS_X) || defined(PTC_PARK_POS_Y) || defined(PTC_PARK_POS_Z) - #error "PTC_PARK_POS_[XYZ] is now PTC_PARK_POS (array). Please update Configuration_adv.h." + #error "PTC_PARK_POS_[XYZ] is now PTC_PARK_POS (array)." #elif !defined(PTC_PARK_POS) #error "PROBE_TEMP_COMPENSATION requires PTC_PARK_POS." #elif defined(PTC_PROBE_POS_X) || defined(PTC_PROBE_POS_Y) - #error "PTC_PROBE_POS_[XY] is now PTC_PROBE_POS (array). Please update Configuration_adv.h." + #error "PTC_PROBE_POS_[XY] is now PTC_PROBE_POS (array)." #elif !defined(PTC_PROBE_POS) #error "PROBE_TEMP_COMPENSATION requires PTC_PROBE_POS." #endif @@ -587,9 +573,13 @@ * Serial */ #ifndef SERIAL_PORT - #error "SERIAL_PORT must be defined in Configuration.h" + #error "SERIAL_PORT must be defined." #elif defined(SERIAL_PORT_2) && SERIAL_PORT_2 == SERIAL_PORT - #error "SERIAL_PORT_2 cannot be the same as SERIAL_PORT. Please update your configuration." + #error "SERIAL_PORT_2 cannot be the same as SERIAL_PORT." +#elif defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == SERIAL_PORT + #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT." +#elif defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == SERIAL_PORT_2 + #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT_2." #endif #if !(defined(__AVR__) && defined(USBCON)) #if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024 @@ -845,7 +835,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #elif DISABLED(NOZZLE_PARK_FEATURE) #error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE." #elif !defined(FILAMENT_UNLOAD_PURGE_FEEDRATE) - #error "ADVANCED_PAUSE_FEATURE requires FILAMENT_UNLOAD_PURGE_FEEDRATE. Please add it to Configuration_adv.h." + #error "ADVANCED_PAUSE_FEATURE requires FILAMENT_UNLOAD_PURGE_FEEDRATE." #elif ENABLED(EXTRUDER_RUNOUT_PREVENT) #error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE." #elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, IS_NEWPANEL, EMERGENCY_PARSER) @@ -892,24 +882,24 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) #ifndef TOOLCHANGE_FS_LENGTH - #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_LENGTH. Please update your Configuration_adv.h." + #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_LENGTH." #elif !defined(TOOLCHANGE_FS_RETRACT_SPEED) - #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_RETRACT_SPEED. Please update your Configuration_adv.h." + #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_RETRACT_SPEED." #elif !defined(TOOLCHANGE_FS_PRIME_SPEED) - #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_PRIME_SPEED. Please update your Configuration_adv.h." + #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_PRIME_SPEED." #endif #endif #if ENABLED(TOOLCHANGE_PARK) #ifndef TOOLCHANGE_PARK_XY - #error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY. Please update your Configuration." + #error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY." #elif !defined(TOOLCHANGE_PARK_XY_FEEDRATE) - #error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY_FEEDRATE. Please update your Configuration." + #error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY_FEEDRATE." #endif #endif #ifndef TOOLCHANGE_ZRAISE - #error "TOOLCHANGE_ZRAISE required for EXTRUDERS > 1. Please update your Configuration_adv.h." + #error "TOOLCHANGE_ZRAISE required for EXTRUDERS > 1." #endif #elif ENABLED(MK2_MULTIPLEXER) @@ -922,7 +912,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS * Sanity checking for the Průša MK2 Multiplexer */ #ifdef SNMM - #error "SNMM is now MK2_MULTIPLEXER. Please update your configuration." + #error "SNMM is now MK2_MULTIPLEXER." #endif /** @@ -1221,7 +1211,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #if ENABLED(EXT_SOLENOID) #error "SOLENOID_PROBE is incompatible with EXT_SOLENOID." #elif !HAS_SOLENOID_1 - #error "SOLENOID_PROBE requires SOL1_PIN. It can be added to your Configuration.h." + #error "SOLENOID_PROBE requires SOL1_PIN." #endif #endif @@ -1388,7 +1378,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #if IS_SCARA #error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers." #elif DISABLED(EEPROM_SETTINGS) - #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration." + #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS." #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15) #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15." #elif !defined(RESTORE_LEVELING_AFTER_G28) @@ -1777,22 +1767,22 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #endif #if TEMP_SENSOR_CHAMBER && !PIN_EXISTS(TEMP_CHAMBER) - #error "TEMP_SENSOR_CHAMBER requires TEMP_CHAMBER_PIN. Please add it to your configuration." + #error "TEMP_SENSOR_CHAMBER requires TEMP_CHAMBER_PIN." #endif #if ENABLED(CHAMBER_FAN) && !(defined(CHAMBER_FAN_MODE) && WITHIN(CHAMBER_FAN_MODE, 0, 2)) - #error "CHAMBER_FAN_MODE must be between 0 and 2. Please update your Configuration_adv.h." + #error "CHAMBER_FAN_MODE must be between 0 and 2." #endif #if ENABLED(CHAMBER_VENT) #ifndef CHAMBER_VENT_SERVO_NR - #error "CHAMBER_VENT_SERVO_NR is required for CHAMBER SERVO. Update your Configuration_adv.h." + #error "CHAMBER_VENT_SERVO_NR is required for CHAMBER SERVO." #elif !NUM_SERVOS #error "NUM_SERVOS is required for a Heated Chamber vent servo (CHAMBER_VENT_SERVO_NR)." #elif CHAMBER_VENT_SERVO_NR >= NUM_SERVOS #error "CHAMBER_VENT_SERVO_NR must be smaller than NUM_SERVOS." #elif HAS_Z_SERVO_PROBE && CHAMBER_VENT_SERVO_NR == Z_PROBE_SERVO_NR - #error "CHAMBER SERVO is already used by BLTOUCH. Please change." + #error "CHAMBER SERVO is already used by BLTOUCH." #elif CHAMBER_VENT_SERVO_NR == 0 && !PIN_EXISTS(SERVO0) #error "SERVO0_PIN must be defined for your Heated Chamber vent servo." #elif CHAMBER_VENT_SERVO_NR == 1 && !PIN_EXISTS(SERVO1) @@ -1806,7 +1796,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #if TEMP_SENSOR_PROBE #if !PIN_EXISTS(TEMP_PROBE) - #error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN. Please add it to your configuration." + #error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN." #elif !HAS_TEMP_ADC_PROBE #error "TEMP_PROBE_PIN must be an ADC pin." #elif !ENABLED(FIX_MOUNTED_PROBE) @@ -1819,9 +1809,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #endif #if MAX6675_0_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_0) && defined(MAX31865_CALIBRATION_OHMS_0)) - #error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set in Configuration.h if TEMP_SENSOR_0 is MAX31865." + #error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set if TEMP_SENSOR_0 is MAX31865." #elif MAX6675_1_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_1) && defined(MAX31865_CALIBRATION_OHMS_1)) - #error "MAX31865_SENSOR_OHMS_1 and MAX31865_CALIBRATION_OHMS_1 must be set in Configuration.h if TEMP_SENSOR_1 is MAX31865." + #error "MAX31865_SENSOR_OHMS_1 and MAX31865_CALIBRATION_OHMS_1 must be set if TEMP_SENSOR_1 is MAX31865." #endif /** @@ -2328,17 +2318,17 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal */ #ifdef LCD_SERIAL_PORT #if LCD_SERIAL_PORT == SERIAL_PORT - #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT. Please update your configuration." + #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT." #elif defined(SERIAL_PORT_2) && LCD_SERIAL_PORT == SERIAL_PORT_2 - #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT_2. Please update your configuration." + #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT_2." #endif #else #if HAS_DGUS_LCD - #error "The DGUS LCD requires LCD_SERIAL_PORT to be defined in Configuration.h" + #error "The DGUS LCD requires LCD_SERIAL_PORT to be defined." #elif EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON) - #error "The ANYCUBIC LCD requires LCD_SERIAL_PORT to be defined in Configuration.h" + #error "The ANYCUBIC LCD requires LCD_SERIAL_PORT to be defined." #elif ENABLED(MALYAN_LCD) - #error "MALYAN_LCD requires LCD_SERIAL_PORT to be defined in Configuration.h" + #error "MALYAN_LCD requires LCD_SERIAL_PORT to be defined." #endif #endif @@ -2827,7 +2817,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #endif #if ENABLED(PRINTCOUNTER) && DISABLED(EEPROM_SETTINGS) - #error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration." + #error "PRINTCOUNTER requires EEPROM_SETTINGS." #endif #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PINS_EXIST(USB_CS, USB_INTR) @@ -2972,11 +2962,11 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #if (PIN_EXISTS(CHDK) + PIN_EXISTS(PHOTOGRAPH) + defined(PHOTO_SWITCH_POSITION)) > 1 #error "Please define only one of CHDK_PIN, PHOTOGRAPH_PIN, or PHOTO_SWITCH_POSITION." #elif defined(PHOTO_SWITCH_POSITION) && !defined(PHOTO_POSITION) - #error "PHOTO_SWITCH_POSITION requires PHOTO_POSITION. Please update your Configuration_adv.h." + #error "PHOTO_SWITCH_POSITION requires PHOTO_POSITION." #elif PIN_EXISTS(CHDK) && defined(CHDK_DELAY) - #error "CHDK_DELAY has been replaced by PHOTO_SWITCH_MS. Please update your Configuration_adv.h." + #error "CHDK_DELAY has been replaced by PHOTO_SWITCH_MS." #elif PIN_EXISTS(CHDK) && !defined(PHOTO_SWITCH_MS) - #error "PHOTO_SWITCH_MS is required with CHDK_PIN. Please update your Configuration_adv.h." + #error "PHOTO_SWITCH_MS is required with CHDK_PIN." #elif defined(PHOTO_RETRACT_MM) static_assert(PHOTO_RETRACT_MM + 0 >= 0, "PHOTO_RETRACT_MM must be >= 0."); #endif @@ -3038,16 +3028,16 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #if HAS_CUTTER #ifndef CUTTER_POWER_UNIT - #error "CUTTER_POWER_UNIT is required with a spindle or laser. Please update your Configuration_adv.h." + #error "CUTTER_POWER_UNIT is required with a spindle or laser." #elif !CUTTER_UNIT_IS(PWM255) && !CUTTER_UNIT_IS(PERCENT) && !CUTTER_UNIT_IS(RPM) && !CUTTER_UNIT_IS(SERVO) - #error "CUTTER_POWER_UNIT must be PWM255, PERCENT, RPM, or SERVO. Please update your Configuration_adv.h." + #error "CUTTER_POWER_UNIT must be PWM255, PERCENT, RPM, or SERVO." #endif #if ENABLED(LASER_POWER_INLINE) #if ENABLED(SPINDLE_CHANGE_DIR) #error "SPINDLE_CHANGE_DIR and LASER_POWER_INLINE are incompatible." #elif ENABLED(LASER_MOVE_G0_OFF) && DISABLED(LASER_MOVE_POWER) - #error "LASER_MOVE_G0_OFF requires LASER_MOVE_POWER. Please update your Configuration_adv.h." + #error "LASER_MOVE_G0_OFF requires LASER_MOVE_POWER." #endif #if ENABLED(LASER_POWER_INLINE_TRAPEZOID) #if DISABLED(SPINDLE_LASER_PWM)