Styling adjustments (PR#2668 & PR#2670)
Keep "astyled" reformatting
This commit is contained in:
Scott Lahteine
committed by
Richard Wackerbarth
Richard Wackerbarth
parent
b5fb7075b9
commit
0c7f7ebcfb
@ -155,339 +155,339 @@
|
||||
#define E3_ENABLE_READ READ(E3_ENABLE_PIN)
|
||||
|
||||
//////////////////////////////////
|
||||
// Pin redefines for TMC drivers.
|
||||
// Pin redefines for TMC drivers.
|
||||
// TMC26X drivers have step and dir on normal pins, but everything else via SPI
|
||||
//////////////////////////////////
|
||||
#if ENABLED(HAVE_TMCDRIVER)
|
||||
#include <SPI.h>
|
||||
#include <TMC26XStepper.h>
|
||||
#include <SPI.h>
|
||||
#include <TMC26XStepper.h>
|
||||
|
||||
void tmc_init();
|
||||
#if ENABLED(X_IS_TMC)
|
||||
extern TMC26XStepper stepperX;
|
||||
#undef X_ENABLE_INIT
|
||||
#define X_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X_ENABLE_WRITE
|
||||
#define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE)
|
||||
|
||||
#undef X_ENABLE_READ
|
||||
#define X_ENABLE_READ stepperX.isEnabled()
|
||||
|
||||
#endif
|
||||
#if ENABLED(X2_IS_TMC)
|
||||
extern TMC26XStepper stepperX2;
|
||||
#undef X2_ENABLE_INIT
|
||||
#define X2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X2_ENABLE_WRITE
|
||||
#define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE)
|
||||
|
||||
#undef X2_ENABLE_READ
|
||||
#define X2_ENABLE_READ stepperX2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Y_IS_TMC)
|
||||
extern TMC26XStepper stepperY;
|
||||
#undef Y_ENABLE_INIT
|
||||
#define Y_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y_ENABLE_WRITE
|
||||
#define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE)
|
||||
|
||||
#undef Y_ENABLE_READ
|
||||
#define Y_ENABLE_READ stepperY.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Y2_IS_TMC)
|
||||
extern TMC26XStepper stepperY2;
|
||||
#undef Y2_ENABLE_INIT
|
||||
#define Y2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y2_ENABLE_WRITE
|
||||
#define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE)
|
||||
|
||||
#undef Y2_ENABLE_READ
|
||||
#define Y2_ENABLE_READ stepperY2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Z_IS_TMC)
|
||||
extern TMC26XStepper stepperZ;
|
||||
#undef Z_ENABLE_INIT
|
||||
#define Z_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z_ENABLE_WRITE
|
||||
#define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE)
|
||||
|
||||
#undef Z_ENABLE_READ
|
||||
#define Z_ENABLE_READ stepperZ.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Z2_IS_TMC)
|
||||
extern TMC26XStepper stepperZ2;
|
||||
#undef Z2_ENABLE_INIT
|
||||
#define Z2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z2_ENABLE_WRITE
|
||||
#define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE)
|
||||
|
||||
#undef Z2_ENABLE_READ
|
||||
#define Z2_ENABLE_READ stepperZ2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E0_IS_TMC)
|
||||
extern TMC26XStepper stepperE0;
|
||||
#undef E0_ENABLE_INIT
|
||||
#define E0_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E0_ENABLE_WRITE
|
||||
#define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE)
|
||||
|
||||
#undef E0_ENABLE_READ
|
||||
#define E0_ENABLE_READ stepperE0.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E1_IS_TMC)
|
||||
extern TMC26XStepper stepperE1;
|
||||
#undef E1_ENABLE_INIT
|
||||
#define E1_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E1_ENABLE_WRITE
|
||||
#define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE)
|
||||
|
||||
#undef E1_ENABLE_READ
|
||||
#define E1_ENABLE_READ stepperE1.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E2_IS_TMC)
|
||||
extern TMC26XStepper stepperE2;
|
||||
#undef E2_ENABLE_INIT
|
||||
#define E2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E2_ENABLE_WRITE
|
||||
#define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE)
|
||||
|
||||
#undef E2_ENABLE_READ
|
||||
#define E2_ENABLE_READ stepperE2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E3_IS_TMC)
|
||||
extern TMC26XStepper stepperE3;
|
||||
#undef E3_ENABLE_INIT
|
||||
#define E3_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E3_ENABLE_WRITE
|
||||
#define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE)
|
||||
|
||||
#undef E3_ENABLE_READ
|
||||
#define E3_ENABLE_READ stepperE3.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(X_IS_TMC)
|
||||
extern TMC26XStepper stepperX;
|
||||
#undef X_ENABLE_INIT
|
||||
#define X_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X_ENABLE_WRITE
|
||||
#define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE)
|
||||
|
||||
#undef X_ENABLE_READ
|
||||
#define X_ENABLE_READ stepperX.isEnabled()
|
||||
|
||||
#endif
|
||||
#if ENABLED(X2_IS_TMC)
|
||||
extern TMC26XStepper stepperX2;
|
||||
#undef X2_ENABLE_INIT
|
||||
#define X2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X2_ENABLE_WRITE
|
||||
#define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE)
|
||||
|
||||
#undef X2_ENABLE_READ
|
||||
#define X2_ENABLE_READ stepperX2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Y_IS_TMC)
|
||||
extern TMC26XStepper stepperY;
|
||||
#undef Y_ENABLE_INIT
|
||||
#define Y_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y_ENABLE_WRITE
|
||||
#define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE)
|
||||
|
||||
#undef Y_ENABLE_READ
|
||||
#define Y_ENABLE_READ stepperY.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Y2_IS_TMC)
|
||||
extern TMC26XStepper stepperY2;
|
||||
#undef Y2_ENABLE_INIT
|
||||
#define Y2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y2_ENABLE_WRITE
|
||||
#define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE)
|
||||
|
||||
#undef Y2_ENABLE_READ
|
||||
#define Y2_ENABLE_READ stepperY2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Z_IS_TMC)
|
||||
extern TMC26XStepper stepperZ;
|
||||
#undef Z_ENABLE_INIT
|
||||
#define Z_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z_ENABLE_WRITE
|
||||
#define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE)
|
||||
|
||||
#undef Z_ENABLE_READ
|
||||
#define Z_ENABLE_READ stepperZ.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(Z2_IS_TMC)
|
||||
extern TMC26XStepper stepperZ2;
|
||||
#undef Z2_ENABLE_INIT
|
||||
#define Z2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z2_ENABLE_WRITE
|
||||
#define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE)
|
||||
|
||||
#undef Z2_ENABLE_READ
|
||||
#define Z2_ENABLE_READ stepperZ2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E0_IS_TMC)
|
||||
extern TMC26XStepper stepperE0;
|
||||
#undef E0_ENABLE_INIT
|
||||
#define E0_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E0_ENABLE_WRITE
|
||||
#define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE)
|
||||
|
||||
#undef E0_ENABLE_READ
|
||||
#define E0_ENABLE_READ stepperE0.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E1_IS_TMC)
|
||||
extern TMC26XStepper stepperE1;
|
||||
#undef E1_ENABLE_INIT
|
||||
#define E1_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E1_ENABLE_WRITE
|
||||
#define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE)
|
||||
|
||||
#undef E1_ENABLE_READ
|
||||
#define E1_ENABLE_READ stepperE1.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E2_IS_TMC)
|
||||
extern TMC26XStepper stepperE2;
|
||||
#undef E2_ENABLE_INIT
|
||||
#define E2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E2_ENABLE_WRITE
|
||||
#define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE)
|
||||
|
||||
#undef E2_ENABLE_READ
|
||||
#define E2_ENABLE_READ stepperE2.isEnabled()
|
||||
#endif
|
||||
#if ENABLED(E3_IS_TMC)
|
||||
extern TMC26XStepper stepperE3;
|
||||
#undef E3_ENABLE_INIT
|
||||
#define E3_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E3_ENABLE_WRITE
|
||||
#define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE)
|
||||
|
||||
#undef E3_ENABLE_READ
|
||||
#define E3_ENABLE_READ stepperE3.isEnabled()
|
||||
#endif
|
||||
|
||||
#endif // HAVE_TMCDRIVER
|
||||
|
||||
//////////////////////////////////
|
||||
// Pin redefines for L6470 drivers.
|
||||
// Pin redefines for L6470 drivers.
|
||||
// L640 drivers have step on normal pins, but dir and everything else via SPI
|
||||
//////////////////////////////////
|
||||
#if ENABLED(HAVE_L6470DRIVER)
|
||||
|
||||
#include <SPI.h>
|
||||
#include <L6470.h>
|
||||
#include <SPI.h>
|
||||
#include <L6470.h>
|
||||
|
||||
void L6470_init();
|
||||
#if ENABLED(X_IS_L6470)
|
||||
extern L6470 stepperX;
|
||||
#undef X_ENABLE_INIT
|
||||
#define X_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X_ENABLE_WRITE
|
||||
#define X_ENABLE_WRITE(STATE) {if(STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree();}
|
||||
|
||||
#undef X_ENABLE_READ
|
||||
#define X_ENABLE_READ (stepperX.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef X_DIR_INIT
|
||||
#define X_DIR_INIT ((void)0)
|
||||
|
||||
#undef X_DIR_WRITE
|
||||
#define X_DIR_WRITE(STATE) stepperX.Step_Clock(STATE)
|
||||
|
||||
#undef X_DIR_READ
|
||||
#define X_DIR_READ (stepperX.getStatus() & STATUS_DIR)
|
||||
|
||||
#endif
|
||||
#if ENABLED(X2_IS_L6470)
|
||||
extern L6470 stepperX2;
|
||||
#undef X2_ENABLE_INIT
|
||||
#define X2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X2_ENABLE_WRITE
|
||||
#define X2_ENABLE_WRITE(STATE) (if(STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree();)
|
||||
|
||||
#undef X2_ENABLE_READ
|
||||
#define X2_ENABLE_READ (stepperX2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef X2_DIR_INIT
|
||||
#define X2_DIR_INIT ((void)0)
|
||||
|
||||
#undef X2_DIR_WRITE
|
||||
#define X2_DIR_WRITE(STATE) stepperX2.Step_Clock(STATE)
|
||||
|
||||
#undef X2_DIR_READ
|
||||
#define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Y_IS_L6470)
|
||||
extern L6470 stepperY;
|
||||
#undef Y_ENABLE_INIT
|
||||
#define Y_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y_ENABLE_WRITE
|
||||
#define Y_ENABLE_WRITE(STATE) (if(STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree();)
|
||||
|
||||
#undef Y_ENABLE_READ
|
||||
#define Y_ENABLE_READ (stepperY.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Y_DIR_INIT
|
||||
#define Y_DIR_INIT ((void)0)
|
||||
|
||||
#undef Y_DIR_WRITE
|
||||
#define Y_DIR_WRITE(STATE) stepperY.Step_Clock(STATE)
|
||||
|
||||
#undef Y_DIR_READ
|
||||
#define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Y2_IS_L6470)
|
||||
extern L6470 stepperY2;
|
||||
#undef Y2_ENABLE_INIT
|
||||
#define Y2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y2_ENABLE_WRITE
|
||||
#define Y2_ENABLE_WRITE(STATE) (if(STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree();)
|
||||
|
||||
#undef Y2_ENABLE_READ
|
||||
#define Y2_ENABLE_READ (stepperY2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Y2_DIR_INIT
|
||||
#define Y2_DIR_INIT ((void)0)
|
||||
|
||||
#undef Y2_DIR_WRITE
|
||||
#define Y2_DIR_WRITE(STATE) stepperY2.Step_Clock(STATE)
|
||||
|
||||
#undef Y2_DIR_READ
|
||||
#define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Z_IS_L6470)
|
||||
extern L6470 stepperZ;
|
||||
#undef Z_ENABLE_INIT
|
||||
#define Z_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z_ENABLE_WRITE
|
||||
#define Z_ENABLE_WRITE(STATE) (if(STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree();)
|
||||
|
||||
#undef Z_ENABLE_READ
|
||||
#define Z_ENABLE_READ (stepperZ.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Z_DIR_INIT
|
||||
#define Z_DIR_INIT ((void)0)
|
||||
|
||||
#undef Z_DIR_WRITE
|
||||
#define Z_DIR_WRITE(STATE) stepperZ.Step_Clock(STATE)
|
||||
|
||||
#undef Y_DIR_READ
|
||||
#define Y_DIR_READ (stepperZ.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Z2_IS_L6470)
|
||||
extern L6470 stepperZ2;
|
||||
#undef Z2_ENABLE_INIT
|
||||
#define Z2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z2_ENABLE_WRITE
|
||||
#define Z2_ENABLE_WRITE(STATE) (if(STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree();)
|
||||
|
||||
#undef Z2_ENABLE_READ
|
||||
#define Z2_ENABLE_READ (stepperZ2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Z2_DIR_INIT
|
||||
#define Z2_DIR_INIT ((void)0)
|
||||
|
||||
#undef Z2_DIR_WRITE
|
||||
#define Z2_DIR_WRITE(STATE) stepperZ2.Step_Clock(STATE)
|
||||
|
||||
#undef Y2_DIR_READ
|
||||
#define Y2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E0_IS_L6470)
|
||||
extern L6470 stepperE0;
|
||||
#undef E0_ENABLE_INIT
|
||||
#define E0_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E0_ENABLE_WRITE
|
||||
#define E0_ENABLE_WRITE(STATE) (if(STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree();)
|
||||
|
||||
#undef E0_ENABLE_READ
|
||||
#define E0_ENABLE_READ (stepperE0.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E0_DIR_INIT
|
||||
#define E0_DIR_INIT ((void)0)
|
||||
|
||||
#undef E0_DIR_WRITE
|
||||
#define E0_DIR_WRITE(STATE) stepperE0.Step_Clock(STATE)
|
||||
|
||||
#undef E0_DIR_READ
|
||||
#define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E1_IS_L6470)
|
||||
extern L6470 stepperE1;
|
||||
#undef E1_ENABLE_INIT
|
||||
#define E1_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E1_ENABLE_WRITE
|
||||
#define E1_ENABLE_WRITE(STATE) (if(STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree();)
|
||||
|
||||
#undef E1_ENABLE_READ
|
||||
#define E1_ENABLE_READ (stepperE1.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E1_DIR_INIT
|
||||
#define E1_DIR_INIT ((void)0)
|
||||
|
||||
#undef E1_DIR_WRITE
|
||||
#define E1_DIR_WRITE(STATE) stepperE1.Step_Clock(STATE)
|
||||
|
||||
#undef E1_DIR_READ
|
||||
#define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E2_IS_L6470)
|
||||
extern L6470 stepperE2;
|
||||
#undef E2_ENABLE_INIT
|
||||
#define E2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E2_ENABLE_WRITE
|
||||
#define E2_ENABLE_WRITE(STATE) (if(STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree();)
|
||||
|
||||
#undef E2_ENABLE_READ
|
||||
#define E2_ENABLE_READ (stepperE2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E2_DIR_INIT
|
||||
#define E2_DIR_INIT ((void)0)
|
||||
|
||||
#undef E2_DIR_WRITE
|
||||
#define E2_DIR_WRITE(STATE) stepperE2.Step_Clock(STATE)
|
||||
|
||||
#undef E2_DIR_READ
|
||||
#define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E3_IS_L6470)
|
||||
extern L6470 stepperE3;
|
||||
#undef E3_ENABLE_INIT
|
||||
#define E3_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E3_ENABLE_WRITE
|
||||
#define E3_ENABLE_WRITE(STATE) (if(STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree();)
|
||||
|
||||
#undef E3_ENABLE_READ
|
||||
#define E3_ENABLE_READ (stepperE3.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E3_DIR_INIT
|
||||
#define E3_DIR_INIT ((void)0)
|
||||
|
||||
#undef E3_DIR_WRITE
|
||||
#define E3_DIR_WRITE(STATE) stepperE3.Step_Clock(STATE)
|
||||
|
||||
#undef E3_DIR_READ
|
||||
#define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(X_IS_L6470)
|
||||
extern L6470 stepperX;
|
||||
#undef X_ENABLE_INIT
|
||||
#define X_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X_ENABLE_WRITE
|
||||
#define X_ENABLE_WRITE(STATE) {if(STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree();}
|
||||
|
||||
#undef X_ENABLE_READ
|
||||
#define X_ENABLE_READ (stepperX.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef X_DIR_INIT
|
||||
#define X_DIR_INIT ((void)0)
|
||||
|
||||
#undef X_DIR_WRITE
|
||||
#define X_DIR_WRITE(STATE) stepperX.Step_Clock(STATE)
|
||||
|
||||
#undef X_DIR_READ
|
||||
#define X_DIR_READ (stepperX.getStatus() & STATUS_DIR)
|
||||
|
||||
#endif
|
||||
#if ENABLED(X2_IS_L6470)
|
||||
extern L6470 stepperX2;
|
||||
#undef X2_ENABLE_INIT
|
||||
#define X2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef X2_ENABLE_WRITE
|
||||
#define X2_ENABLE_WRITE(STATE) (if(STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree();)
|
||||
|
||||
#undef X2_ENABLE_READ
|
||||
#define X2_ENABLE_READ (stepperX2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef X2_DIR_INIT
|
||||
#define X2_DIR_INIT ((void)0)
|
||||
|
||||
#undef X2_DIR_WRITE
|
||||
#define X2_DIR_WRITE(STATE) stepperX2.Step_Clock(STATE)
|
||||
|
||||
#undef X2_DIR_READ
|
||||
#define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Y_IS_L6470)
|
||||
extern L6470 stepperY;
|
||||
#undef Y_ENABLE_INIT
|
||||
#define Y_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y_ENABLE_WRITE
|
||||
#define Y_ENABLE_WRITE(STATE) (if(STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree();)
|
||||
|
||||
#undef Y_ENABLE_READ
|
||||
#define Y_ENABLE_READ (stepperY.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Y_DIR_INIT
|
||||
#define Y_DIR_INIT ((void)0)
|
||||
|
||||
#undef Y_DIR_WRITE
|
||||
#define Y_DIR_WRITE(STATE) stepperY.Step_Clock(STATE)
|
||||
|
||||
#undef Y_DIR_READ
|
||||
#define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Y2_IS_L6470)
|
||||
extern L6470 stepperY2;
|
||||
#undef Y2_ENABLE_INIT
|
||||
#define Y2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Y2_ENABLE_WRITE
|
||||
#define Y2_ENABLE_WRITE(STATE) (if(STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree();)
|
||||
|
||||
#undef Y2_ENABLE_READ
|
||||
#define Y2_ENABLE_READ (stepperY2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Y2_DIR_INIT
|
||||
#define Y2_DIR_INIT ((void)0)
|
||||
|
||||
#undef Y2_DIR_WRITE
|
||||
#define Y2_DIR_WRITE(STATE) stepperY2.Step_Clock(STATE)
|
||||
|
||||
#undef Y2_DIR_READ
|
||||
#define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Z_IS_L6470)
|
||||
extern L6470 stepperZ;
|
||||
#undef Z_ENABLE_INIT
|
||||
#define Z_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z_ENABLE_WRITE
|
||||
#define Z_ENABLE_WRITE(STATE) (if(STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree();)
|
||||
|
||||
#undef Z_ENABLE_READ
|
||||
#define Z_ENABLE_READ (stepperZ.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Z_DIR_INIT
|
||||
#define Z_DIR_INIT ((void)0)
|
||||
|
||||
#undef Z_DIR_WRITE
|
||||
#define Z_DIR_WRITE(STATE) stepperZ.Step_Clock(STATE)
|
||||
|
||||
#undef Y_DIR_READ
|
||||
#define Y_DIR_READ (stepperZ.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(Z2_IS_L6470)
|
||||
extern L6470 stepperZ2;
|
||||
#undef Z2_ENABLE_INIT
|
||||
#define Z2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef Z2_ENABLE_WRITE
|
||||
#define Z2_ENABLE_WRITE(STATE) (if(STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree();)
|
||||
|
||||
#undef Z2_ENABLE_READ
|
||||
#define Z2_ENABLE_READ (stepperZ2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef Z2_DIR_INIT
|
||||
#define Z2_DIR_INIT ((void)0)
|
||||
|
||||
#undef Z2_DIR_WRITE
|
||||
#define Z2_DIR_WRITE(STATE) stepperZ2.Step_Clock(STATE)
|
||||
|
||||
#undef Y2_DIR_READ
|
||||
#define Y2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E0_IS_L6470)
|
||||
extern L6470 stepperE0;
|
||||
#undef E0_ENABLE_INIT
|
||||
#define E0_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E0_ENABLE_WRITE
|
||||
#define E0_ENABLE_WRITE(STATE) (if(STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree();)
|
||||
|
||||
#undef E0_ENABLE_READ
|
||||
#define E0_ENABLE_READ (stepperE0.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E0_DIR_INIT
|
||||
#define E0_DIR_INIT ((void)0)
|
||||
|
||||
#undef E0_DIR_WRITE
|
||||
#define E0_DIR_WRITE(STATE) stepperE0.Step_Clock(STATE)
|
||||
|
||||
#undef E0_DIR_READ
|
||||
#define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E1_IS_L6470)
|
||||
extern L6470 stepperE1;
|
||||
#undef E1_ENABLE_INIT
|
||||
#define E1_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E1_ENABLE_WRITE
|
||||
#define E1_ENABLE_WRITE(STATE) (if(STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree();)
|
||||
|
||||
#undef E1_ENABLE_READ
|
||||
#define E1_ENABLE_READ (stepperE1.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E1_DIR_INIT
|
||||
#define E1_DIR_INIT ((void)0)
|
||||
|
||||
#undef E1_DIR_WRITE
|
||||
#define E1_DIR_WRITE(STATE) stepperE1.Step_Clock(STATE)
|
||||
|
||||
#undef E1_DIR_READ
|
||||
#define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E2_IS_L6470)
|
||||
extern L6470 stepperE2;
|
||||
#undef E2_ENABLE_INIT
|
||||
#define E2_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E2_ENABLE_WRITE
|
||||
#define E2_ENABLE_WRITE(STATE) (if(STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree();)
|
||||
|
||||
#undef E2_ENABLE_READ
|
||||
#define E2_ENABLE_READ (stepperE2.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E2_DIR_INIT
|
||||
#define E2_DIR_INIT ((void)0)
|
||||
|
||||
#undef E2_DIR_WRITE
|
||||
#define E2_DIR_WRITE(STATE) stepperE2.Step_Clock(STATE)
|
||||
|
||||
#undef E2_DIR_READ
|
||||
#define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
#if ENABLED(E3_IS_L6470)
|
||||
extern L6470 stepperE3;
|
||||
#undef E3_ENABLE_INIT
|
||||
#define E3_ENABLE_INIT ((void)0)
|
||||
|
||||
#undef E3_ENABLE_WRITE
|
||||
#define E3_ENABLE_WRITE(STATE) (if(STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree();)
|
||||
|
||||
#undef E3_ENABLE_READ
|
||||
#define E3_ENABLE_READ (stepperE3.getStatus() & STATUS_HIZ)
|
||||
|
||||
#undef E3_DIR_INIT
|
||||
#define E3_DIR_INIT ((void)0)
|
||||
|
||||
#undef E3_DIR_WRITE
|
||||
#define E3_DIR_WRITE(STATE) stepperE3.Step_Clock(STATE)
|
||||
|
||||
#undef E3_DIR_READ
|
||||
#define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR)
|
||||
#endif
|
||||
|
||||
#endif //HAVE_L6470DRIVER
|
||||
|
||||
|
||||
Reference in New Issue
Block a user