bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Proper AVR preemptive interrupt handling (#10496)

Browse Source 
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
This commit is contained in:
Eduardo José Tagle
2018-04-24 00:05:07 -03:00
committed by Scott Lahteine
parent f423e54f77
commit 0c428a66d9
12 changed files with 48 additions and 62 deletions
Download Patch File Download Diff File Expand all files Collapse all files

31
Marlin/src/HAL/HAL_AVR/HAL.h
View File

@ -142,10 +142,11 @@ extern "C" {
#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A)
#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A)
#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B)
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B)
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B)
#define HAL_timer_start(timer_num, frequency)
@ -156,13 +157,31 @@ extern "C" {
#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
#define HAL_timer_isr_prologue(timer_num)
/**
* On AVR there is no hardware prioritization and preemption of
* interrupts, so this emulates it. The UART has first priority
* (otherwise, characters will be lost due to UART overflow).
* Then: Stepper, Endstops, Temperature, and -finally- all others.
*/
#define HAL_timer_isr_prologue_0 do{ DISABLE_TEMPERATURE_INTERRUPT(); sei(); }while(0)
#define HAL_timer_isr_epilogue_0 do{ cli(); ENABLE_TEMPERATURE_INTERRUPT(); }while(0)
#define HAL_timer_isr_prologue_1 \
const bool temp_isr_was_enabled = TEMPERATURE_ISR_ENABLED(); \
do{ \
DISABLE_TEMPERATURE_INTERRUPT(); \
DISABLE_STEPPER_DRIVER_INTERRUPT(); \
sei(); \
}while(0)
#define HAL_timer_isr_epilogue_1 do{ cli(); ENABLE_STEPPER_DRIVER_INTERRUPT(); if (temp_isr_was_enabled) ENABLE_TEMPERATURE_INTERRUPT(); }while(0)
#define HAL_timer_isr_prologue(TIMER_NUM) _CAT(HAL_timer_isr_prologue_, TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM) _CAT(HAL_timer_isr_epilogue_, TIMER_NUM)
#define HAL_STEP_TIMER_ISR ISR(TIMER1_COMPA_vect)
#define HAL_TEMP_TIMER_ISR ISR(TIMER0_COMPB_vect)
#define HAL_ENABLE_ISRs() do { cli(); if (thermalManager.in_temp_isr) DISABLE_TEMPERATURE_INTERRUPT(); else ENABLE_TEMPERATURE_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT(); } while(0)
// ADC
#ifdef DIDR2
#define HAL_ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin & 0x07); }while(0)