From 0967c87a8f3978d721625823d76fbc4dc32c069f Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 23 Oct 2020 14:52:59 -0500 Subject: [PATCH] Pins post-process header (#19860) --- Marlin/src/HAL/ESP32/timers.h | 6 - Marlin/src/pins/pins.h | 853 +--------------------------- Marlin/src/pins/pins_postprocess.h | 877 +++++++++++++++++++++++++++++ 3 files changed, 881 insertions(+), 855 deletions(-) create mode 100644 Marlin/src/pins/pins_postprocess.h diff --git a/Marlin/src/HAL/ESP32/timers.h b/Marlin/src/HAL/ESP32/timers.h index d722670f33..7d35186b1c 100644 --- a/Marlin/src/HAL/ESP32/timers.h +++ b/Marlin/src/HAL/ESP32/timers.h @@ -24,15 +24,9 @@ #include #include -// Includes needed to get I2S_STEPPER_STREAM. Note that pins.h -// is included in case this header is being included early. -#include "../../inc/MarlinConfig.h" -#include "../../pins/pins.h" - // ------------------------ // Defines // ------------------------ -// #define FORCE_INLINE __attribute__((always_inline)) inline typedef uint64_t hal_timer_t; diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 3a380def74..9ea35371a4 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -21,9 +21,9 @@ */ #pragma once -#include "../core/boards.h" - /** + * File: pins/pins.h + * * Include pins definitions * * Pins numbering schemes: @@ -783,852 +783,7 @@ #endif -// Define certain undefined pins -#ifndef X_MS1_PIN - #define X_MS1_PIN -1 -#endif -#ifndef X_MS2_PIN - #define X_MS2_PIN -1 -#endif -#ifndef X_MS3_PIN - #define X_MS3_PIN -1 -#endif -#ifndef Y_MS1_PIN - #define Y_MS1_PIN -1 -#endif -#ifndef Y_MS2_PIN - #define Y_MS2_PIN -1 -#endif -#ifndef Y_MS3_PIN - #define Y_MS3_PIN -1 -#endif -#ifndef Z_MS1_PIN - #define Z_MS1_PIN -1 -#endif -#ifndef Z_MS2_PIN - #define Z_MS2_PIN -1 -#endif -#ifndef Z_MS3_PIN - #define Z_MS3_PIN -1 -#endif -#ifndef E0_MS1_PIN - #define E0_MS1_PIN -1 -#endif -#ifndef E0_MS2_PIN - #define E0_MS2_PIN -1 -#endif -#ifndef E0_MS3_PIN - #define E0_MS3_PIN -1 -#endif -#ifndef E1_MS1_PIN - #define E1_MS1_PIN -1 -#endif -#ifndef E1_MS2_PIN - #define E1_MS2_PIN -1 -#endif -#ifndef E1_MS3_PIN - #define E1_MS3_PIN -1 -#endif -#ifndef E2_MS1_PIN - #define E2_MS1_PIN -1 -#endif -#ifndef E2_MS2_PIN - #define E2_MS2_PIN -1 -#endif -#ifndef E2_MS3_PIN - #define E2_MS3_PIN -1 -#endif -#ifndef E3_MS1_PIN - #define E3_MS1_PIN -1 -#endif -#ifndef E3_MS2_PIN - #define E3_MS2_PIN -1 -#endif -#ifndef E3_MS3_PIN - #define E3_MS3_PIN -1 -#endif -#ifndef E4_MS1_PIN - #define E4_MS1_PIN -1 -#endif -#ifndef E4_MS2_PIN - #define E4_MS2_PIN -1 -#endif -#ifndef E4_MS3_PIN - #define E4_MS3_PIN -1 -#endif -#ifndef E5_MS1_PIN - #define E5_MS1_PIN -1 -#endif -#ifndef E5_MS2_PIN - #define E5_MS2_PIN -1 -#endif -#ifndef E5_MS3_PIN - #define E5_MS3_PIN -1 -#endif -#ifndef E6_MS1_PIN - #define E6_MS1_PIN -1 -#endif -#ifndef E6_MS2_PIN - #define E6_MS2_PIN -1 -#endif -#ifndef E6_MS3_PIN - #define E6_MS3_PIN -1 -#endif -#ifndef E7_MS1_PIN - #define E7_MS1_PIN -1 -#endif -#ifndef E7_MS2_PIN - #define E7_MS2_PIN -1 -#endif -#ifndef E7_MS3_PIN - #define E7_MS3_PIN -1 -#endif - -#ifndef E0_STEP_PIN - #define E0_STEP_PIN -1 -#endif -#ifndef E0_DIR_PIN - #define E0_DIR_PIN -1 -#endif -#ifndef E0_ENABLE_PIN - #define E0_ENABLE_PIN -1 -#endif -#ifndef E1_STEP_PIN - #define E1_STEP_PIN -1 -#endif -#ifndef E1_DIR_PIN - #define E1_DIR_PIN -1 -#endif -#ifndef E1_ENABLE_PIN - #define E1_ENABLE_PIN -1 -#endif -#ifndef E2_STEP_PIN - #define E2_STEP_PIN -1 -#endif -#ifndef E2_DIR_PIN - #define E2_DIR_PIN -1 -#endif -#ifndef E2_ENABLE_PIN - #define E2_ENABLE_PIN -1 -#endif -#ifndef E3_STEP_PIN - #define E3_STEP_PIN -1 -#endif -#ifndef E3_DIR_PIN - #define E3_DIR_PIN -1 -#endif -#ifndef E3_ENABLE_PIN - #define E3_ENABLE_PIN -1 -#endif -#ifndef E4_STEP_PIN - #define E4_STEP_PIN -1 -#endif -#ifndef E4_DIR_PIN - #define E4_DIR_PIN -1 -#endif -#ifndef E4_ENABLE_PIN - #define E4_ENABLE_PIN -1 -#endif -#ifndef E5_STEP_PIN - #define E5_STEP_PIN -1 -#endif -#ifndef E5_DIR_PIN - #define E5_DIR_PIN -1 -#endif -#ifndef E5_ENABLE_PIN - #define E5_ENABLE_PIN -1 -#endif -#ifndef E6_STEP_PIN - #define E6_STEP_PIN -1 -#endif -#ifndef E6_DIR_PIN - #define E6_DIR_PIN -1 -#endif -#ifndef E6_ENABLE_PIN - #define E6_ENABLE_PIN -1 -#endif -#ifndef E7_STEP_PIN - #define E7_STEP_PIN -1 -#endif -#ifndef E7_DIR_PIN - #define E7_DIR_PIN -1 -#endif -#ifndef E7_ENABLE_PIN - #define E7_ENABLE_PIN -1 -#endif - // -// Destroy unused CS pins +// Post-process pins according to configured settings // -#if !AXIS_HAS_SPI(X) - #undef X_CS_PIN -#endif -#if !AXIS_HAS_SPI(Y) - #undef Y_CS_PIN -#endif -#if !AXIS_HAS_SPI(Z) - #undef Z_CS_PIN -#endif -#if E_STEPPERS && !AXIS_HAS_SPI(E0) - #undef E0_CS_PIN -#endif -#if E_STEPPERS > 1 && !AXIS_HAS_SPI(E1) - #undef E1_CS_PIN -#endif -#if E_STEPPERS > 2 && !AXIS_HAS_SPI(E2) - #undef E2_CS_PIN -#endif -#if E_STEPPERS > 3 && !AXIS_HAS_SPI(E3) - #undef E3_CS_PIN -#endif -#if E_STEPPERS > 4 && !AXIS_HAS_SPI(E4) - #undef E4_CS_PIN -#endif -#if E_STEPPERS > 5 && !AXIS_HAS_SPI(E5) - #undef E5_CS_PIN -#endif -#if E_STEPPERS > 6 && !AXIS_HAS_SPI(E6) - #undef E6_CS_PIN -#endif -#if E_STEPPERS > 7 && !AXIS_HAS_SPI(E7) - #undef E7_CS_PIN -#endif - -#ifndef X_CS_PIN - #define X_CS_PIN -1 -#endif -#ifndef Y_CS_PIN - #define Y_CS_PIN -1 -#endif -#ifndef Z_CS_PIN - #define Z_CS_PIN -1 -#endif -#ifndef E0_CS_PIN - #define E0_CS_PIN -1 -#endif -#ifndef E1_CS_PIN - #define E1_CS_PIN -1 -#endif -#ifndef E2_CS_PIN - #define E2_CS_PIN -1 -#endif -#ifndef E3_CS_PIN - #define E3_CS_PIN -1 -#endif -#ifndef E4_CS_PIN - #define E4_CS_PIN -1 -#endif -#ifndef E5_CS_PIN - #define E5_CS_PIN -1 -#endif -#ifndef E6_CS_PIN - #define E6_CS_PIN -1 -#endif -#ifndef E7_CS_PIN - #define E7_CS_PIN -1 -#endif - -#ifndef FAN_PIN - #define FAN_PIN -1 -#endif -#define FAN0_PIN FAN_PIN -#ifndef FAN1_PIN - #define FAN1_PIN -1 -#endif -#ifndef FAN2_PIN - #define FAN2_PIN -1 -#endif -#ifndef CONTROLLER_FAN_PIN - #define CONTROLLER_FAN_PIN -1 -#endif - -#ifndef FANMUX0_PIN - #define FANMUX0_PIN -1 -#endif -#ifndef FANMUX1_PIN - #define FANMUX1_PIN -1 -#endif -#ifndef FANMUX2_PIN - #define FANMUX2_PIN -1 -#endif - -#ifndef HEATER_0_PIN - #define HEATER_0_PIN -1 -#endif -#ifndef HEATER_1_PIN - #define HEATER_1_PIN -1 -#endif -#ifndef HEATER_2_PIN - #define HEATER_2_PIN -1 -#endif -#ifndef HEATER_3_PIN - #define HEATER_3_PIN -1 -#endif -#ifndef HEATER_4_PIN - #define HEATER_4_PIN -1 -#endif -#ifndef HEATER_5_PIN - #define HEATER_5_PIN -1 -#endif -#ifndef HEATER_6_PIN - #define HEATER_6_PIN -1 -#endif -#ifndef HEATER_7_PIN - #define HEATER_7_PIN -1 -#endif -#ifndef HEATER_BED_PIN - #define HEATER_BED_PIN -1 -#endif - -#ifndef TEMP_0_PIN - #define TEMP_0_PIN -1 -#endif -#ifndef TEMP_1_PIN - #define TEMP_1_PIN -1 -#endif -#ifndef TEMP_2_PIN - #define TEMP_2_PIN -1 -#endif -#ifndef TEMP_3_PIN - #define TEMP_3_PIN -1 -#endif -#ifndef TEMP_4_PIN - #define TEMP_4_PIN -1 -#endif -#ifndef TEMP_5_PIN - #define TEMP_5_PIN -1 -#endif -#ifndef TEMP_6_PIN - #define TEMP_6_PIN -1 -#endif -#ifndef TEMP_7_PIN - #define TEMP_7_PIN -1 -#endif -#ifndef TEMP_BED_PIN - #define TEMP_BED_PIN -1 -#endif - -#ifndef SD_DETECT_PIN - #define SD_DETECT_PIN -1 -#endif -#ifndef SDPOWER_PIN - #define SDPOWER_PIN -1 -#endif -#ifndef SDSS - #define SDSS -1 -#endif -#ifndef LED_PIN - #define LED_PIN -1 -#endif -#if DISABLED(PSU_CONTROL) || !defined(PS_ON_PIN) - #undef PS_ON_PIN - #define PS_ON_PIN -1 -#endif -#ifndef KILL_PIN - #define KILL_PIN -1 -#endif -#ifndef SUICIDE_PIN - #define SUICIDE_PIN -1 -#endif -#ifndef SUICIDE_PIN_INVERTING - #define SUICIDE_PIN_INVERTING false -#endif - -#ifndef NUM_SERVO_PLUGS - #define NUM_SERVO_PLUGS 4 -#endif - -// -// Assign endstop pins for boards with only 3 connectors -// -#ifdef X_STOP_PIN - #if X_HOME_DIR < 0 - #define X_MIN_PIN X_STOP_PIN - #ifndef X_MAX_PIN - #define X_MAX_PIN -1 - #endif - #else - #define X_MAX_PIN X_STOP_PIN - #ifndef X_MIN_PIN - #define X_MIN_PIN -1 - #endif - #endif -#elif X_HOME_DIR < 0 - #define X_STOP_PIN X_MIN_PIN -#else - #define X_STOP_PIN X_MAX_PIN -#endif - -#ifdef Y_STOP_PIN - #if Y_HOME_DIR < 0 - #define Y_MIN_PIN Y_STOP_PIN - #ifndef Y_MAX_PIN - #define Y_MAX_PIN -1 - #endif - #else - #define Y_MAX_PIN Y_STOP_PIN - #ifndef Y_MIN_PIN - #define Y_MIN_PIN -1 - #endif - #endif -#elif Y_HOME_DIR < 0 - #define Y_STOP_PIN Y_MIN_PIN -#else - #define Y_STOP_PIN Y_MAX_PIN -#endif - -#ifdef Z_STOP_PIN - #if Z_HOME_DIR < 0 - #define Z_MIN_PIN Z_STOP_PIN - #ifndef Z_MAX_PIN - #define Z_MAX_PIN -1 - #endif - #else - #define Z_MAX_PIN Z_STOP_PIN - #ifndef Z_MIN_PIN - #define Z_MIN_PIN -1 - #endif - #endif -#elif Z_HOME_DIR < 0 - #define Z_STOP_PIN Z_MIN_PIN -#else - #define Z_STOP_PIN Z_MAX_PIN -#endif - -// -// Disable unused endstop / probe pins -// -#if !HAS_CUSTOM_PROBE_PIN - #undef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN -1 -#endif - -#if DISABLED(USE_XMAX_PLUG) - #undef X_MAX_PIN - #define X_MAX_PIN -1 -#endif - -#if DISABLED(USE_YMAX_PLUG) - #undef Y_MAX_PIN - #define Y_MAX_PIN -1 -#endif - -#if DISABLED(USE_ZMAX_PLUG) - #undef Z_MAX_PIN - #define Z_MAX_PIN -1 -#endif - -#if DISABLED(USE_XMIN_PLUG) - #undef X_MIN_PIN - #define X_MIN_PIN -1 -#endif - -#if DISABLED(USE_YMIN_PLUG) - #undef Y_MIN_PIN - #define Y_MIN_PIN -1 -#endif - -#if DISABLED(USE_ZMIN_PLUG) - #undef Z_MIN_PIN - #define Z_MIN_PIN -1 -#endif - -#if HAS_FILAMENT_SENSOR - #define FIL_RUNOUT1_PIN FIL_RUNOUT_PIN -#else - #undef FIL_RUNOUT_PIN - #undef FIL_RUNOUT1_PIN -#endif - -#ifndef LCD_PINS_D4 - #define LCD_PINS_D4 -1 -#endif - -#if HAS_MARLINUI_HD44780 || TOUCH_UI_ULTIPANEL - #ifndef LCD_PINS_D5 - #define LCD_PINS_D5 -1 - #endif - #ifndef LCD_PINS_D6 - #define LCD_PINS_D6 -1 - #endif - #ifndef LCD_PINS_D7 - #define LCD_PINS_D7 -1 - #endif -#endif - -/** - * Auto-Assignment for Dual X, Dual Y, Multi-Z Steppers - * - * By default X2 is assigned to the next open E plug - * on the board, then in order, Y2, Z2, Z3. These can be - * overridden in Configuration.h or Configuration_adv.h. - */ - -#define __PEXI(p,q) PIN_EXISTS(E##p##_##q) -#define _PEXI(p,q) __PEXI(p,q) -#define __EPIN(p,q) E##p##_##q##_PIN -#define _EPIN(p,q) __EPIN(p,q) -#define DIAG_REMAPPED(p,q) (PIN_EXISTS(q) && _EPIN(p##_E_INDEX, DIAG) == q##_PIN) - -// The X2 axis, if any, should be the next open extruder port -#define X2_E_INDEX E_STEPPERS - -#if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS) - #ifndef X2_STEP_PIN - #define X2_STEP_PIN _EPIN(X2_E_INDEX, STEP) - #define X2_DIR_PIN _EPIN(X2_E_INDEX, DIR) - #define X2_ENABLE_PIN _EPIN(X2_E_INDEX, ENABLE) - #if X2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(X2_STEP) - #error "No E stepper plug left for X2!" - #endif - #endif - #ifndef X2_MS1_PIN - #define X2_MS1_PIN _EPIN(X2_E_INDEX, MS1) - #endif - #ifndef X2_MS2_PIN - #define X2_MS2_PIN _EPIN(X2_E_INDEX, MS2) - #endif - #ifndef X2_MS3_PIN - #define X2_MS3_PIN _EPIN(X2_E_INDEX, MS3) - #endif - #if AXIS_HAS_SPI(X2) && !defined(X2_CS_PIN) - #define X2_CS_PIN _EPIN(X2_E_INDEX, CS) - #endif - #if AXIS_HAS_UART(X2) - #ifndef X2_SERIAL_TX_PIN - #define X2_SERIAL_TX_PIN _EPIN(X2_E_INDEX, SERIAL_TX) - #endif - #ifndef X2_SERIAL_RX_PIN - #define X2_SERIAL_RX_PIN _EPIN(X2_E_INDEX, SERIAL_RX) - #endif - #endif - - // - // Auto-assign pins for stallGuard sensorless homing - // - #if defined(X2_STALL_SENSITIVITY) && ENABLED(X_DUAL_ENDSTOPS) && _PEXI(X2_E_INDEX, DIAG) - #define X2_DIAG_PIN _EPIN(X2_E_INDEX, DIAG) - #if DIAG_REMAPPED(X2, X_MIN) // If already remapped in the pins file... - #define X2_USE_ENDSTOP _XMIN_ - #elif DIAG_REMAPPED(X2, Y_MIN) - #define X2_USE_ENDSTOP _YMIN_ - #elif DIAG_REMAPPED(X2, Z_MIN) - #define X2_USE_ENDSTOP _ZMIN_ - #elif DIAG_REMAPPED(X2, X_MAX) - #define X2_USE_ENDSTOP _XMAX_ - #elif DIAG_REMAPPED(X2, Y_MAX) - #define X2_USE_ENDSTOP _YMAX_ - #elif DIAG_REMAPPED(X2, Z_MAX) - #define X2_USE_ENDSTOP _ZMAX_ - #else // Otherwise use the driver DIAG_PIN directly - #define _X2_USE_ENDSTOP(P) _E##P##_DIAG_ - #define X2_USE_ENDSTOP _X2_USE_ENDSTOP(X2_E_INDEX) - #endif - #undef X2_DIAG_PIN - #endif - - #define Y2_E_INDEX INCREMENT(X2_E_INDEX) -#else - #define Y2_E_INDEX X2_E_INDEX -#endif - -#ifndef X2_CS_PIN - #define X2_CS_PIN -1 -#endif -#ifndef X2_MS1_PIN - #define X2_MS1_PIN -1 -#endif -#ifndef X2_MS2_PIN - #define X2_MS2_PIN -1 -#endif -#ifndef X2_MS3_PIN - #define X2_MS3_PIN -1 -#endif - -// The Y2 axis, if any, should be the next open extruder port -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #ifndef Y2_STEP_PIN - #define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP) - #define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR) - #define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE) - #if Y2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Y2_STEP) - #error "No E stepper plug left for Y2!" - #endif - #endif - #ifndef Y2_MS1_PIN - #define Y2_MS1_PIN _EPIN(Y2_E_INDEX, MS1) - #endif - #ifndef Y2_MS2_PIN - #define Y2_MS2_PIN _EPIN(Y2_E_INDEX, MS2) - #endif - #ifndef Y2_MS3_PIN - #define Y2_MS3_PIN _EPIN(Y2_E_INDEX, MS3) - #endif - #if AXIS_HAS_SPI(Y2) && !defined(Y2_CS_PIN) - #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) - #endif - #if AXIS_HAS_UART(Y2) - #ifndef Y2_SERIAL_TX_PIN - #define Y2_SERIAL_TX_PIN _EPIN(Y2_E_INDEX, SERIAL_TX) - #endif - #ifndef Y2_SERIAL_RX_PIN - #define Y2_SERIAL_RX_PIN _EPIN(Y2_E_INDEX, SERIAL_RX) - #endif - #endif - #if defined(Y2_STALL_SENSITIVITY) && ENABLED(Y_DUAL_ENDSTOPS) && _PEXI(Y2_E_INDEX, DIAG) - #define Y2_DIAG_PIN _EPIN(Y2_E_INDEX, DIAG) - #if DIAG_REMAPPED(Y2, X_MIN) - #define Y2_USE_ENDSTOP _XMIN_ - #elif DIAG_REMAPPED(Y2, Y_MIN) - #define Y2_USE_ENDSTOP _YMIN_ - #elif DIAG_REMAPPED(Y2, Z_MIN) - #define Y2_USE_ENDSTOP _ZMIN_ - #elif DIAG_REMAPPED(Y2, X_MAX) - #define Y2_USE_ENDSTOP _XMAX_ - #elif DIAG_REMAPPED(Y2, Y_MAX) - #define Y2_USE_ENDSTOP _YMAX_ - #elif DIAG_REMAPPED(Y2, Z_MAX) - #define Y2_USE_ENDSTOP _ZMAX_ - #else - #define _Y2_USE_ENDSTOP(P) _E##P##_DIAG_ - #define Y2_USE_ENDSTOP _Y2_USE_ENDSTOP(Y2_E_INDEX) - #endif - #undef Y2_DIAG_PIN - #endif - #define Z2_E_INDEX INCREMENT(Y2_E_INDEX) -#else - #define Z2_E_INDEX Y2_E_INDEX -#endif - -#ifndef Y2_CS_PIN - #define Y2_CS_PIN -1 -#endif -#ifndef Y2_MS1_PIN - #define Y2_MS1_PIN -1 -#endif -#ifndef Y2_MS2_PIN - #define Y2_MS2_PIN -1 -#endif -#ifndef Y2_MS3_PIN - #define Y2_MS3_PIN -1 -#endif - -// The Z2 axis, if any, should be the next open extruder port -#if NUM_Z_STEPPER_DRIVERS >= 2 - #ifndef Z2_STEP_PIN - #define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP) - #define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR) - #define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE) - #if Z2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z2_STEP) - #error "No E stepper plug left for Z2!" - #endif - #endif - #ifndef Z2_MS1_PIN - #define Z2_MS1_PIN _EPIN(Z2_E_INDEX, MS1) - #endif - #ifndef Z2_MS2_PIN - #define Z2_MS2_PIN _EPIN(Z2_E_INDEX, MS2) - #endif - #ifndef Z2_MS3_PIN - #define Z2_MS3_PIN _EPIN(Z2_E_INDEX, MS3) - #endif - #if AXIS_HAS_SPI(Z2) && !defined(Z2_CS_PIN) - #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) - #endif - #if AXIS_HAS_UART(Z2) - #ifndef Z2_SERIAL_TX_PIN - #define Z2_SERIAL_TX_PIN _EPIN(Z2_E_INDEX, SERIAL_TX) - #endif - #ifndef Z2_SERIAL_RX_PIN - #define Z2_SERIAL_RX_PIN _EPIN(Z2_E_INDEX, SERIAL_RX) - #endif - #endif - #if defined(Z2_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 2 && _PEXI(Z2_E_INDEX, DIAG) - #define Z2_DIAG_PIN _EPIN(Z2_E_INDEX, DIAG) - #if DIAG_REMAPPED(Z2, X_MIN) - #define Z2_USE_ENDSTOP _XMIN_ - #elif DIAG_REMAPPED(Z2, Y_MIN) - #define Z2_USE_ENDSTOP _YMIN_ - #elif DIAG_REMAPPED(Z2, Z_MIN) - #define Z2_USE_ENDSTOP _ZMIN_ - #elif DIAG_REMAPPED(Z2, X_MAX) - #define Z2_USE_ENDSTOP _XMAX_ - #elif DIAG_REMAPPED(Z2, Y_MAX) - #define Z2_USE_ENDSTOP _YMAX_ - #elif DIAG_REMAPPED(Z2, Z_MAX) - #define Z2_USE_ENDSTOP _ZMAX_ - #else - #define _Z2_USE_ENDSTOP(P) _E##P##_DIAG_ - #define Z2_USE_ENDSTOP _Z2_USE_ENDSTOP(Z2_E_INDEX) - #endif - #undef Z2_DIAG_PIN - #endif - #define Z3_E_INDEX INCREMENT(Z2_E_INDEX) -#else - #define Z3_E_INDEX Z2_E_INDEX -#endif - -#ifndef Z2_CS_PIN - #define Z2_CS_PIN -1 -#endif -#ifndef Z2_MS1_PIN - #define Z2_MS1_PIN -1 -#endif -#ifndef Z2_MS2_PIN - #define Z2_MS2_PIN -1 -#endif -#ifndef Z2_MS3_PIN - #define Z2_MS3_PIN -1 -#endif - -#if NUM_Z_STEPPER_DRIVERS >= 3 - #ifndef Z3_STEP_PIN - #define Z3_STEP_PIN _EPIN(Z3_E_INDEX, STEP) - #define Z3_DIR_PIN _EPIN(Z3_E_INDEX, DIR) - #define Z3_ENABLE_PIN _EPIN(Z3_E_INDEX, ENABLE) - #if Z3_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z3_STEP) - #error "No E stepper plug left for Z3!" - #endif - #endif - #if AXIS_HAS_SPI(Z3) - #ifndef Z3_CS_PIN - #define Z3_CS_PIN _EPIN(Z3_E_INDEX, CS) - #endif - #endif - #ifndef Z3_MS1_PIN - #define Z3_MS1_PIN _EPIN(Z3_E_INDEX, MS1) - #endif - #ifndef Z3_MS2_PIN - #define Z3_MS2_PIN _EPIN(Z3_E_INDEX, MS2) - #endif - #ifndef Z3_MS3_PIN - #define Z3_MS3_PIN _EPIN(Z3_E_INDEX, MS3) - #endif - #if AXIS_HAS_UART(Z3) - #ifndef Z3_SERIAL_TX_PIN - #define Z3_SERIAL_TX_PIN _EPIN(Z3_E_INDEX, SERIAL_TX) - #endif - #ifndef Z3_SERIAL_RX_PIN - #define Z3_SERIAL_RX_PIN _EPIN(Z3_E_INDEX, SERIAL_RX) - #endif - #endif - #if defined(Z3_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3 && _PEXI(Z3_E_INDEX, DIAG) - #define Z3_DIAG_PIN _EPIN(Z3_E_INDEX, DIAG) - #if DIAG_REMAPPED(Z3, X_MIN) - #define Z3_USE_ENDSTOP _XMIN_ - #elif DIAG_REMAPPED(Z3, Y_MIN) - #define Z3_USE_ENDSTOP _YMIN_ - #elif DIAG_REMAPPED(Z3, Z_MIN) - #define Z3_USE_ENDSTOP _ZMIN_ - #elif DIAG_REMAPPED(Z3, X_MAX) - #define Z3_USE_ENDSTOP _XMAX_ - #elif DIAG_REMAPPED(Z3, Y_MAX) - #define Z3_USE_ENDSTOP _YMAX_ - #elif DIAG_REMAPPED(Z3, Z_MAX) - #define Z3_USE_ENDSTOP _ZMAX_ - #else - #define _Z3_USE_ENDSTOP(P) _E##P##_DIAG_ - #define Z3_USE_ENDSTOP _Z3_USE_ENDSTOP(Z3_E_INDEX) - #endif - #undef Z3_DIAG_PIN - #endif - #define Z4_E_INDEX INCREMENT(Z3_E_INDEX) -#endif - -#ifndef Z3_CS_PIN - #define Z3_CS_PIN -1 -#endif -#ifndef Z3_MS1_PIN - #define Z3_MS1_PIN -1 -#endif -#ifndef Z3_MS2_PIN - #define Z3_MS2_PIN -1 -#endif -#ifndef Z3_MS3_PIN - #define Z3_MS3_PIN -1 -#endif - -#if NUM_Z_STEPPER_DRIVERS >= 4 - #ifndef Z4_STEP_PIN - #define Z4_STEP_PIN _EPIN(Z4_E_INDEX, STEP) - #define Z4_DIR_PIN _EPIN(Z4_E_INDEX, DIR) - #define Z4_ENABLE_PIN _EPIN(Z4_E_INDEX, ENABLE) - #if Z4_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z4_STEP) - #error "No E stepper plug left for Z4!" - #endif - #endif - #if AXIS_HAS_SPI(Z4) - #ifndef Z4_CS_PIN - #define Z4_CS_PIN _EPIN(Z4_E_INDEX, CS) - #endif - #endif - #ifndef Z4_MS1_PIN - #define Z4_MS1_PIN _EPIN(Z4_E_INDEX, MS1) - #endif - #ifndef Z4_MS2_PIN - #define Z4_MS2_PIN _EPIN(Z4_E_INDEX, MS2) - #endif - #ifndef Z4_MS3_PIN - #define Z4_MS3_PIN _EPIN(Z4_E_INDEX, MS3) - #endif - #if AXIS_HAS_UART(Z4) - #ifndef Z4_SERIAL_TX_PIN - #define Z4_SERIAL_TX_PIN _EPIN(Z4_E_INDEX, SERIAL_TX) - #endif - #ifndef Z4_SERIAL_RX_PIN - #define Z4_SERIAL_RX_PIN _EPIN(Z4_E_INDEX, SERIAL_RX) - #endif - #endif - #if defined(Z4_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4 && _PEXI(Z4_E_INDEX, DIAG) - #define Z4_DIAG_PIN _EPIN(Z4_E_INDEX, DIAG) - #if DIAG_REMAPPED(Z4, X_MIN) - #define Z4_USE_ENDSTOP _XMIN_ - #elif DIAG_REMAPPED(Z4, Y_MIN) - #define Z4_USE_ENDSTOP _YMIN_ - #elif DIAG_REMAPPED(Z4, Z_MIN) - #define Z4_USE_ENDSTOP _ZMIN_ - #elif DIAG_REMAPPED(Z4, X_MAX) - #define Z4_USE_ENDSTOP _XMAX_ - #elif DIAG_REMAPPED(Z4, Y_MAX) - #define Z4_USE_ENDSTOP _YMAX_ - #elif DIAG_REMAPPED(Z4, Z_MAX) - #define Z4_USE_ENDSTOP _ZMAX_ - #else - #define _Z4_USE_ENDSTOP(P) _E##P##_DIAG_ - #define Z4_USE_ENDSTOP _Z4_USE_ENDSTOP(Z4_E_INDEX) - #endif - #undef Z4_DIAG_PIN - #endif -#endif - -#ifndef Z4_CS_PIN - #define Z4_CS_PIN -1 -#endif -#ifndef Z4_MS1_PIN - #define Z4_MS1_PIN -1 -#endif -#ifndef Z4_MS2_PIN - #define Z4_MS2_PIN -1 -#endif -#ifndef Z4_MS3_PIN - #define Z4_MS3_PIN -1 -#endif - -#if HAS_MARLINUI_U8GLIB - #if !defined(ST7920_DELAY_1) && defined(BOARD_ST7920_DELAY_1) - #define ST7920_DELAY_1 BOARD_ST7920_DELAY_1 - #endif - #if !defined(ST7920_DELAY_2) && defined(BOARD_ST7920_DELAY_2) - #define ST7920_DELAY_2 BOARD_ST7920_DELAY_2 - #endif - #if !defined(ST7920_DELAY_3) && defined(BOARD_ST7920_DELAY_3) - #define ST7920_DELAY_3 BOARD_ST7920_DELAY_3 - #endif -#else - #undef ST7920_DELAY_1 - #undef ST7920_DELAY_2 - #undef ST7920_DELAY_3 -#endif - -#undef HAS_FREE_AUX2_PINS -#undef DIAG_REMAPPED +#include "pins_postprocess.h" diff --git a/Marlin/src/pins/pins_postprocess.h b/Marlin/src/pins/pins_postprocess.h new file mode 100644 index 0000000000..fdf9f095cb --- /dev/null +++ b/Marlin/src/pins/pins_postprocess.h @@ -0,0 +1,877 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +// +// File: pins/pins_postprocess.h +// Post-process pins according to configured settings +// + +// Define certain undefined pins +#ifndef X_MS1_PIN + #define X_MS1_PIN -1 +#endif +#ifndef X_MS2_PIN + #define X_MS2_PIN -1 +#endif +#ifndef X_MS3_PIN + #define X_MS3_PIN -1 +#endif +#ifndef Y_MS1_PIN + #define Y_MS1_PIN -1 +#endif +#ifndef Y_MS2_PIN + #define Y_MS2_PIN -1 +#endif +#ifndef Y_MS3_PIN + #define Y_MS3_PIN -1 +#endif +#ifndef Z_MS1_PIN + #define Z_MS1_PIN -1 +#endif +#ifndef Z_MS2_PIN + #define Z_MS2_PIN -1 +#endif +#ifndef Z_MS3_PIN + #define Z_MS3_PIN -1 +#endif +#ifndef E0_MS1_PIN + #define E0_MS1_PIN -1 +#endif +#ifndef E0_MS2_PIN + #define E0_MS2_PIN -1 +#endif +#ifndef E0_MS3_PIN + #define E0_MS3_PIN -1 +#endif +#ifndef E1_MS1_PIN + #define E1_MS1_PIN -1 +#endif +#ifndef E1_MS2_PIN + #define E1_MS2_PIN -1 +#endif +#ifndef E1_MS3_PIN + #define E1_MS3_PIN -1 +#endif +#ifndef E2_MS1_PIN + #define E2_MS1_PIN -1 +#endif +#ifndef E2_MS2_PIN + #define E2_MS2_PIN -1 +#endif +#ifndef E2_MS3_PIN + #define E2_MS3_PIN -1 +#endif +#ifndef E3_MS1_PIN + #define E3_MS1_PIN -1 +#endif +#ifndef E3_MS2_PIN + #define E3_MS2_PIN -1 +#endif +#ifndef E3_MS3_PIN + #define E3_MS3_PIN -1 +#endif +#ifndef E4_MS1_PIN + #define E4_MS1_PIN -1 +#endif +#ifndef E4_MS2_PIN + #define E4_MS2_PIN -1 +#endif +#ifndef E4_MS3_PIN + #define E4_MS3_PIN -1 +#endif +#ifndef E5_MS1_PIN + #define E5_MS1_PIN -1 +#endif +#ifndef E5_MS2_PIN + #define E5_MS2_PIN -1 +#endif +#ifndef E5_MS3_PIN + #define E5_MS3_PIN -1 +#endif +#ifndef E6_MS1_PIN + #define E6_MS1_PIN -1 +#endif +#ifndef E6_MS2_PIN + #define E6_MS2_PIN -1 +#endif +#ifndef E6_MS3_PIN + #define E6_MS3_PIN -1 +#endif +#ifndef E7_MS1_PIN + #define E7_MS1_PIN -1 +#endif +#ifndef E7_MS2_PIN + #define E7_MS2_PIN -1 +#endif +#ifndef E7_MS3_PIN + #define E7_MS3_PIN -1 +#endif + +#ifndef E0_STEP_PIN + #define E0_STEP_PIN -1 +#endif +#ifndef E0_DIR_PIN + #define E0_DIR_PIN -1 +#endif +#ifndef E0_ENABLE_PIN + #define E0_ENABLE_PIN -1 +#endif +#ifndef E1_STEP_PIN + #define E1_STEP_PIN -1 +#endif +#ifndef E1_DIR_PIN + #define E1_DIR_PIN -1 +#endif +#ifndef E1_ENABLE_PIN + #define E1_ENABLE_PIN -1 +#endif +#ifndef E2_STEP_PIN + #define E2_STEP_PIN -1 +#endif +#ifndef E2_DIR_PIN + #define E2_DIR_PIN -1 +#endif +#ifndef E2_ENABLE_PIN + #define E2_ENABLE_PIN -1 +#endif +#ifndef E3_STEP_PIN + #define E3_STEP_PIN -1 +#endif +#ifndef E3_DIR_PIN + #define E3_DIR_PIN -1 +#endif +#ifndef E3_ENABLE_PIN + #define E3_ENABLE_PIN -1 +#endif +#ifndef E4_STEP_PIN + #define E4_STEP_PIN -1 +#endif +#ifndef E4_DIR_PIN + #define E4_DIR_PIN -1 +#endif +#ifndef E4_ENABLE_PIN + #define E4_ENABLE_PIN -1 +#endif +#ifndef E5_STEP_PIN + #define E5_STEP_PIN -1 +#endif +#ifndef E5_DIR_PIN + #define E5_DIR_PIN -1 +#endif +#ifndef E5_ENABLE_PIN + #define E5_ENABLE_PIN -1 +#endif +#ifndef E6_STEP_PIN + #define E6_STEP_PIN -1 +#endif +#ifndef E6_DIR_PIN + #define E6_DIR_PIN -1 +#endif +#ifndef E6_ENABLE_PIN + #define E6_ENABLE_PIN -1 +#endif +#ifndef E7_STEP_PIN + #define E7_STEP_PIN -1 +#endif +#ifndef E7_DIR_PIN + #define E7_DIR_PIN -1 +#endif +#ifndef E7_ENABLE_PIN + #define E7_ENABLE_PIN -1 +#endif + +// +// Destroy unused CS pins +// +#if !AXIS_HAS_SPI(X) + #undef X_CS_PIN +#endif +#if !AXIS_HAS_SPI(Y) + #undef Y_CS_PIN +#endif +#if !AXIS_HAS_SPI(Z) + #undef Z_CS_PIN +#endif +#if E_STEPPERS && !AXIS_HAS_SPI(E0) + #undef E0_CS_PIN +#endif +#if E_STEPPERS > 1 && !AXIS_HAS_SPI(E1) + #undef E1_CS_PIN +#endif +#if E_STEPPERS > 2 && !AXIS_HAS_SPI(E2) + #undef E2_CS_PIN +#endif +#if E_STEPPERS > 3 && !AXIS_HAS_SPI(E3) + #undef E3_CS_PIN +#endif +#if E_STEPPERS > 4 && !AXIS_HAS_SPI(E4) + #undef E4_CS_PIN +#endif +#if E_STEPPERS > 5 && !AXIS_HAS_SPI(E5) + #undef E5_CS_PIN +#endif +#if E_STEPPERS > 6 && !AXIS_HAS_SPI(E6) + #undef E6_CS_PIN +#endif +#if E_STEPPERS > 7 && !AXIS_HAS_SPI(E7) + #undef E7_CS_PIN +#endif + +#ifndef X_CS_PIN + #define X_CS_PIN -1 +#endif +#ifndef Y_CS_PIN + #define Y_CS_PIN -1 +#endif +#ifndef Z_CS_PIN + #define Z_CS_PIN -1 +#endif +#ifndef E0_CS_PIN + #define E0_CS_PIN -1 +#endif +#ifndef E1_CS_PIN + #define E1_CS_PIN -1 +#endif +#ifndef E2_CS_PIN + #define E2_CS_PIN -1 +#endif +#ifndef E3_CS_PIN + #define E3_CS_PIN -1 +#endif +#ifndef E4_CS_PIN + #define E4_CS_PIN -1 +#endif +#ifndef E5_CS_PIN + #define E5_CS_PIN -1 +#endif +#ifndef E6_CS_PIN + #define E6_CS_PIN -1 +#endif +#ifndef E7_CS_PIN + #define E7_CS_PIN -1 +#endif + +#ifndef FAN_PIN + #define FAN_PIN -1 +#endif +#define FAN0_PIN FAN_PIN +#ifndef FAN1_PIN + #define FAN1_PIN -1 +#endif +#ifndef FAN2_PIN + #define FAN2_PIN -1 +#endif +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN -1 +#endif + +#ifndef FANMUX0_PIN + #define FANMUX0_PIN -1 +#endif +#ifndef FANMUX1_PIN + #define FANMUX1_PIN -1 +#endif +#ifndef FANMUX2_PIN + #define FANMUX2_PIN -1 +#endif + +#ifndef HEATER_0_PIN + #define HEATER_0_PIN -1 +#endif +#ifndef HEATER_1_PIN + #define HEATER_1_PIN -1 +#endif +#ifndef HEATER_2_PIN + #define HEATER_2_PIN -1 +#endif +#ifndef HEATER_3_PIN + #define HEATER_3_PIN -1 +#endif +#ifndef HEATER_4_PIN + #define HEATER_4_PIN -1 +#endif +#ifndef HEATER_5_PIN + #define HEATER_5_PIN -1 +#endif +#ifndef HEATER_6_PIN + #define HEATER_6_PIN -1 +#endif +#ifndef HEATER_7_PIN + #define HEATER_7_PIN -1 +#endif +#ifndef HEATER_BED_PIN + #define HEATER_BED_PIN -1 +#endif + +#ifndef TEMP_0_PIN + #define TEMP_0_PIN -1 +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN -1 +#endif +#ifndef TEMP_2_PIN + #define TEMP_2_PIN -1 +#endif +#ifndef TEMP_3_PIN + #define TEMP_3_PIN -1 +#endif +#ifndef TEMP_4_PIN + #define TEMP_4_PIN -1 +#endif +#ifndef TEMP_5_PIN + #define TEMP_5_PIN -1 +#endif +#ifndef TEMP_6_PIN + #define TEMP_6_PIN -1 +#endif +#ifndef TEMP_7_PIN + #define TEMP_7_PIN -1 +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN -1 +#endif + +#ifndef SD_DETECT_PIN + #define SD_DETECT_PIN -1 +#endif +#ifndef SDPOWER_PIN + #define SDPOWER_PIN -1 +#endif +#ifndef SDSS + #define SDSS -1 +#endif +#ifndef LED_PIN + #define LED_PIN -1 +#endif +#if DISABLED(PSU_CONTROL) || !defined(PS_ON_PIN) + #undef PS_ON_PIN + #define PS_ON_PIN -1 +#endif +#ifndef KILL_PIN + #define KILL_PIN -1 +#endif +#ifndef SUICIDE_PIN + #define SUICIDE_PIN -1 +#endif +#ifndef SUICIDE_PIN_INVERTING + #define SUICIDE_PIN_INVERTING false +#endif + +#ifndef NUM_SERVO_PLUGS + #define NUM_SERVO_PLUGS 4 +#endif + +// +// Assign endstop pins for boards with only 3 connectors +// +#ifdef X_STOP_PIN + #if X_HOME_DIR < 0 + #define X_MIN_PIN X_STOP_PIN + #ifndef X_MAX_PIN + #define X_MAX_PIN -1 + #endif + #else + #define X_MAX_PIN X_STOP_PIN + #ifndef X_MIN_PIN + #define X_MIN_PIN -1 + #endif + #endif +#elif X_HOME_DIR < 0 + #define X_STOP_PIN X_MIN_PIN +#else + #define X_STOP_PIN X_MAX_PIN +#endif + +#ifdef Y_STOP_PIN + #if Y_HOME_DIR < 0 + #define Y_MIN_PIN Y_STOP_PIN + #ifndef Y_MAX_PIN + #define Y_MAX_PIN -1 + #endif + #else + #define Y_MAX_PIN Y_STOP_PIN + #ifndef Y_MIN_PIN + #define Y_MIN_PIN -1 + #endif + #endif +#elif Y_HOME_DIR < 0 + #define Y_STOP_PIN Y_MIN_PIN +#else + #define Y_STOP_PIN Y_MAX_PIN +#endif + +#ifdef Z_STOP_PIN + #if Z_HOME_DIR < 0 + #define Z_MIN_PIN Z_STOP_PIN + #ifndef Z_MAX_PIN + #define Z_MAX_PIN -1 + #endif + #else + #define Z_MAX_PIN Z_STOP_PIN + #ifndef Z_MIN_PIN + #define Z_MIN_PIN -1 + #endif + #endif +#elif Z_HOME_DIR < 0 + #define Z_STOP_PIN Z_MIN_PIN +#else + #define Z_STOP_PIN Z_MAX_PIN +#endif + +// +// Disable unused endstop / probe pins +// +#if !HAS_CUSTOM_PROBE_PIN + #undef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN -1 +#endif + +#if DISABLED(USE_XMAX_PLUG) + #undef X_MAX_PIN + #define X_MAX_PIN -1 +#endif + +#if DISABLED(USE_YMAX_PLUG) + #undef Y_MAX_PIN + #define Y_MAX_PIN -1 +#endif + +#if DISABLED(USE_ZMAX_PLUG) + #undef Z_MAX_PIN + #define Z_MAX_PIN -1 +#endif + +#if DISABLED(USE_XMIN_PLUG) + #undef X_MIN_PIN + #define X_MIN_PIN -1 +#endif + +#if DISABLED(USE_YMIN_PLUG) + #undef Y_MIN_PIN + #define Y_MIN_PIN -1 +#endif + +#if DISABLED(USE_ZMIN_PLUG) + #undef Z_MIN_PIN + #define Z_MIN_PIN -1 +#endif + +#if HAS_FILAMENT_SENSOR + #define FIL_RUNOUT1_PIN FIL_RUNOUT_PIN +#else + #undef FIL_RUNOUT_PIN + #undef FIL_RUNOUT1_PIN +#endif + +#ifndef LCD_PINS_D4 + #define LCD_PINS_D4 -1 +#endif + +#if HAS_MARLINUI_HD44780 || TOUCH_UI_ULTIPANEL + #ifndef LCD_PINS_D5 + #define LCD_PINS_D5 -1 + #endif + #ifndef LCD_PINS_D6 + #define LCD_PINS_D6 -1 + #endif + #ifndef LCD_PINS_D7 + #define LCD_PINS_D7 -1 + #endif +#endif + +/** + * Auto-Assignment for Dual X, Dual Y, Multi-Z Steppers + * + * By default X2 is assigned to the next open E plug + * on the board, then in order, Y2, Z2, Z3. These can be + * overridden in Configuration.h or Configuration_adv.h. + */ + +#define __PEXI(p,q) PIN_EXISTS(E##p##_##q) +#define _PEXI(p,q) __PEXI(p,q) +#define __EPIN(p,q) E##p##_##q##_PIN +#define _EPIN(p,q) __EPIN(p,q) +#define DIAG_REMAPPED(p,q) (PIN_EXISTS(q) && _EPIN(p##_E_INDEX, DIAG) == q##_PIN) + +// The X2 axis, if any, should be the next open extruder port +#define X2_E_INDEX E_STEPPERS + +#if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS) + #ifndef X2_STEP_PIN + #define X2_STEP_PIN _EPIN(X2_E_INDEX, STEP) + #define X2_DIR_PIN _EPIN(X2_E_INDEX, DIR) + #define X2_ENABLE_PIN _EPIN(X2_E_INDEX, ENABLE) + #if X2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(X2_STEP) + #error "No E stepper plug left for X2!" + #endif + #endif + #ifndef X2_MS1_PIN + #define X2_MS1_PIN _EPIN(X2_E_INDEX, MS1) + #endif + #ifndef X2_MS2_PIN + #define X2_MS2_PIN _EPIN(X2_E_INDEX, MS2) + #endif + #ifndef X2_MS3_PIN + #define X2_MS3_PIN _EPIN(X2_E_INDEX, MS3) + #endif + #if AXIS_HAS_SPI(X2) && !defined(X2_CS_PIN) + #define X2_CS_PIN _EPIN(X2_E_INDEX, CS) + #endif + #if AXIS_HAS_UART(X2) + #ifndef X2_SERIAL_TX_PIN + #define X2_SERIAL_TX_PIN _EPIN(X2_E_INDEX, SERIAL_TX) + #endif + #ifndef X2_SERIAL_RX_PIN + #define X2_SERIAL_RX_PIN _EPIN(X2_E_INDEX, SERIAL_RX) + #endif + #endif + + // + // Auto-assign pins for stallGuard sensorless homing + // + #if defined(X2_STALL_SENSITIVITY) && ENABLED(X_DUAL_ENDSTOPS) && _PEXI(X2_E_INDEX, DIAG) + #define X2_DIAG_PIN _EPIN(X2_E_INDEX, DIAG) + #if DIAG_REMAPPED(X2, X_MIN) // If already remapped in the pins file... + #define X2_USE_ENDSTOP _XMIN_ + #elif DIAG_REMAPPED(X2, Y_MIN) + #define X2_USE_ENDSTOP _YMIN_ + #elif DIAG_REMAPPED(X2, Z_MIN) + #define X2_USE_ENDSTOP _ZMIN_ + #elif DIAG_REMAPPED(X2, X_MAX) + #define X2_USE_ENDSTOP _XMAX_ + #elif DIAG_REMAPPED(X2, Y_MAX) + #define X2_USE_ENDSTOP _YMAX_ + #elif DIAG_REMAPPED(X2, Z_MAX) + #define X2_USE_ENDSTOP _ZMAX_ + #else // Otherwise use the driver DIAG_PIN directly + #define _X2_USE_ENDSTOP(P) _E##P##_DIAG_ + #define X2_USE_ENDSTOP _X2_USE_ENDSTOP(X2_E_INDEX) + #endif + #undef X2_DIAG_PIN + #endif + + #define Y2_E_INDEX INCREMENT(X2_E_INDEX) +#else + #define Y2_E_INDEX X2_E_INDEX +#endif + +#ifndef X2_CS_PIN + #define X2_CS_PIN -1 +#endif +#ifndef X2_MS1_PIN + #define X2_MS1_PIN -1 +#endif +#ifndef X2_MS2_PIN + #define X2_MS2_PIN -1 +#endif +#ifndef X2_MS3_PIN + #define X2_MS3_PIN -1 +#endif + +// The Y2 axis, if any, should be the next open extruder port +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #ifndef Y2_STEP_PIN + #define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP) + #define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR) + #define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE) + #if Y2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Y2_STEP) + #error "No E stepper plug left for Y2!" + #endif + #endif + #ifndef Y2_MS1_PIN + #define Y2_MS1_PIN _EPIN(Y2_E_INDEX, MS1) + #endif + #ifndef Y2_MS2_PIN + #define Y2_MS2_PIN _EPIN(Y2_E_INDEX, MS2) + #endif + #ifndef Y2_MS3_PIN + #define Y2_MS3_PIN _EPIN(Y2_E_INDEX, MS3) + #endif + #if AXIS_HAS_SPI(Y2) && !defined(Y2_CS_PIN) + #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) + #endif + #if AXIS_HAS_UART(Y2) + #ifndef Y2_SERIAL_TX_PIN + #define Y2_SERIAL_TX_PIN _EPIN(Y2_E_INDEX, SERIAL_TX) + #endif + #ifndef Y2_SERIAL_RX_PIN + #define Y2_SERIAL_RX_PIN _EPIN(Y2_E_INDEX, SERIAL_RX) + #endif + #endif + #if defined(Y2_STALL_SENSITIVITY) && ENABLED(Y_DUAL_ENDSTOPS) && _PEXI(Y2_E_INDEX, DIAG) + #define Y2_DIAG_PIN _EPIN(Y2_E_INDEX, DIAG) + #if DIAG_REMAPPED(Y2, X_MIN) + #define Y2_USE_ENDSTOP _XMIN_ + #elif DIAG_REMAPPED(Y2, Y_MIN) + #define Y2_USE_ENDSTOP _YMIN_ + #elif DIAG_REMAPPED(Y2, Z_MIN) + #define Y2_USE_ENDSTOP _ZMIN_ + #elif DIAG_REMAPPED(Y2, X_MAX) + #define Y2_USE_ENDSTOP _XMAX_ + #elif DIAG_REMAPPED(Y2, Y_MAX) + #define Y2_USE_ENDSTOP _YMAX_ + #elif DIAG_REMAPPED(Y2, Z_MAX) + #define Y2_USE_ENDSTOP _ZMAX_ + #else + #define _Y2_USE_ENDSTOP(P) _E##P##_DIAG_ + #define Y2_USE_ENDSTOP _Y2_USE_ENDSTOP(Y2_E_INDEX) + #endif + #undef Y2_DIAG_PIN + #endif + #define Z2_E_INDEX INCREMENT(Y2_E_INDEX) +#else + #define Z2_E_INDEX Y2_E_INDEX +#endif + +#ifndef Y2_CS_PIN + #define Y2_CS_PIN -1 +#endif +#ifndef Y2_MS1_PIN + #define Y2_MS1_PIN -1 +#endif +#ifndef Y2_MS2_PIN + #define Y2_MS2_PIN -1 +#endif +#ifndef Y2_MS3_PIN + #define Y2_MS3_PIN -1 +#endif + +// The Z2 axis, if any, should be the next open extruder port +#if NUM_Z_STEPPER_DRIVERS >= 2 + #ifndef Z2_STEP_PIN + #define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP) + #define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR) + #define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE) + #if Z2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z2_STEP) + #error "No E stepper plug left for Z2!" + #endif + #endif + #ifndef Z2_MS1_PIN + #define Z2_MS1_PIN _EPIN(Z2_E_INDEX, MS1) + #endif + #ifndef Z2_MS2_PIN + #define Z2_MS2_PIN _EPIN(Z2_E_INDEX, MS2) + #endif + #ifndef Z2_MS3_PIN + #define Z2_MS3_PIN _EPIN(Z2_E_INDEX, MS3) + #endif + #if AXIS_HAS_SPI(Z2) && !defined(Z2_CS_PIN) + #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) + #endif + #if AXIS_HAS_UART(Z2) + #ifndef Z2_SERIAL_TX_PIN + #define Z2_SERIAL_TX_PIN _EPIN(Z2_E_INDEX, SERIAL_TX) + #endif + #ifndef Z2_SERIAL_RX_PIN + #define Z2_SERIAL_RX_PIN _EPIN(Z2_E_INDEX, SERIAL_RX) + #endif + #endif + #if defined(Z2_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 2 && _PEXI(Z2_E_INDEX, DIAG) + #define Z2_DIAG_PIN _EPIN(Z2_E_INDEX, DIAG) + #if DIAG_REMAPPED(Z2, X_MIN) + #define Z2_USE_ENDSTOP _XMIN_ + #elif DIAG_REMAPPED(Z2, Y_MIN) + #define Z2_USE_ENDSTOP _YMIN_ + #elif DIAG_REMAPPED(Z2, Z_MIN) + #define Z2_USE_ENDSTOP _ZMIN_ + #elif DIAG_REMAPPED(Z2, X_MAX) + #define Z2_USE_ENDSTOP _XMAX_ + #elif DIAG_REMAPPED(Z2, Y_MAX) + #define Z2_USE_ENDSTOP _YMAX_ + #elif DIAG_REMAPPED(Z2, Z_MAX) + #define Z2_USE_ENDSTOP _ZMAX_ + #else + #define _Z2_USE_ENDSTOP(P) _E##P##_DIAG_ + #define Z2_USE_ENDSTOP _Z2_USE_ENDSTOP(Z2_E_INDEX) + #endif + #undef Z2_DIAG_PIN + #endif + #define Z3_E_INDEX INCREMENT(Z2_E_INDEX) +#else + #define Z3_E_INDEX Z2_E_INDEX +#endif + +#ifndef Z2_CS_PIN + #define Z2_CS_PIN -1 +#endif +#ifndef Z2_MS1_PIN + #define Z2_MS1_PIN -1 +#endif +#ifndef Z2_MS2_PIN + #define Z2_MS2_PIN -1 +#endif +#ifndef Z2_MS3_PIN + #define Z2_MS3_PIN -1 +#endif + +#if NUM_Z_STEPPER_DRIVERS >= 3 + #ifndef Z3_STEP_PIN + #define Z3_STEP_PIN _EPIN(Z3_E_INDEX, STEP) + #define Z3_DIR_PIN _EPIN(Z3_E_INDEX, DIR) + #define Z3_ENABLE_PIN _EPIN(Z3_E_INDEX, ENABLE) + #if Z3_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z3_STEP) + #error "No E stepper plug left for Z3!" + #endif + #endif + #if AXIS_HAS_SPI(Z3) + #ifndef Z3_CS_PIN + #define Z3_CS_PIN _EPIN(Z3_E_INDEX, CS) + #endif + #endif + #ifndef Z3_MS1_PIN + #define Z3_MS1_PIN _EPIN(Z3_E_INDEX, MS1) + #endif + #ifndef Z3_MS2_PIN + #define Z3_MS2_PIN _EPIN(Z3_E_INDEX, MS2) + #endif + #ifndef Z3_MS3_PIN + #define Z3_MS3_PIN _EPIN(Z3_E_INDEX, MS3) + #endif + #if AXIS_HAS_UART(Z3) + #ifndef Z3_SERIAL_TX_PIN + #define Z3_SERIAL_TX_PIN _EPIN(Z3_E_INDEX, SERIAL_TX) + #endif + #ifndef Z3_SERIAL_RX_PIN + #define Z3_SERIAL_RX_PIN _EPIN(Z3_E_INDEX, SERIAL_RX) + #endif + #endif + #if defined(Z3_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3 && _PEXI(Z3_E_INDEX, DIAG) + #define Z3_DIAG_PIN _EPIN(Z3_E_INDEX, DIAG) + #if DIAG_REMAPPED(Z3, X_MIN) + #define Z3_USE_ENDSTOP _XMIN_ + #elif DIAG_REMAPPED(Z3, Y_MIN) + #define Z3_USE_ENDSTOP _YMIN_ + #elif DIAG_REMAPPED(Z3, Z_MIN) + #define Z3_USE_ENDSTOP _ZMIN_ + #elif DIAG_REMAPPED(Z3, X_MAX) + #define Z3_USE_ENDSTOP _XMAX_ + #elif DIAG_REMAPPED(Z3, Y_MAX) + #define Z3_USE_ENDSTOP _YMAX_ + #elif DIAG_REMAPPED(Z3, Z_MAX) + #define Z3_USE_ENDSTOP _ZMAX_ + #else + #define _Z3_USE_ENDSTOP(P) _E##P##_DIAG_ + #define Z3_USE_ENDSTOP _Z3_USE_ENDSTOP(Z3_E_INDEX) + #endif + #undef Z3_DIAG_PIN + #endif + #define Z4_E_INDEX INCREMENT(Z3_E_INDEX) +#endif + +#ifndef Z3_CS_PIN + #define Z3_CS_PIN -1 +#endif +#ifndef Z3_MS1_PIN + #define Z3_MS1_PIN -1 +#endif +#ifndef Z3_MS2_PIN + #define Z3_MS2_PIN -1 +#endif +#ifndef Z3_MS3_PIN + #define Z3_MS3_PIN -1 +#endif + +#if NUM_Z_STEPPER_DRIVERS >= 4 + #ifndef Z4_STEP_PIN + #define Z4_STEP_PIN _EPIN(Z4_E_INDEX, STEP) + #define Z4_DIR_PIN _EPIN(Z4_E_INDEX, DIR) + #define Z4_ENABLE_PIN _EPIN(Z4_E_INDEX, ENABLE) + #if Z4_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z4_STEP) + #error "No E stepper plug left for Z4!" + #endif + #endif + #if AXIS_HAS_SPI(Z4) + #ifndef Z4_CS_PIN + #define Z4_CS_PIN _EPIN(Z4_E_INDEX, CS) + #endif + #endif + #ifndef Z4_MS1_PIN + #define Z4_MS1_PIN _EPIN(Z4_E_INDEX, MS1) + #endif + #ifndef Z4_MS2_PIN + #define Z4_MS2_PIN _EPIN(Z4_E_INDEX, MS2) + #endif + #ifndef Z4_MS3_PIN + #define Z4_MS3_PIN _EPIN(Z4_E_INDEX, MS3) + #endif + #if AXIS_HAS_UART(Z4) + #ifndef Z4_SERIAL_TX_PIN + #define Z4_SERIAL_TX_PIN _EPIN(Z4_E_INDEX, SERIAL_TX) + #endif + #ifndef Z4_SERIAL_RX_PIN + #define Z4_SERIAL_RX_PIN _EPIN(Z4_E_INDEX, SERIAL_RX) + #endif + #endif + #if defined(Z4_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4 && _PEXI(Z4_E_INDEX, DIAG) + #define Z4_DIAG_PIN _EPIN(Z4_E_INDEX, DIAG) + #if DIAG_REMAPPED(Z4, X_MIN) + #define Z4_USE_ENDSTOP _XMIN_ + #elif DIAG_REMAPPED(Z4, Y_MIN) + #define Z4_USE_ENDSTOP _YMIN_ + #elif DIAG_REMAPPED(Z4, Z_MIN) + #define Z4_USE_ENDSTOP _ZMIN_ + #elif DIAG_REMAPPED(Z4, X_MAX) + #define Z4_USE_ENDSTOP _XMAX_ + #elif DIAG_REMAPPED(Z4, Y_MAX) + #define Z4_USE_ENDSTOP _YMAX_ + #elif DIAG_REMAPPED(Z4, Z_MAX) + #define Z4_USE_ENDSTOP _ZMAX_ + #else + #define _Z4_USE_ENDSTOP(P) _E##P##_DIAG_ + #define Z4_USE_ENDSTOP _Z4_USE_ENDSTOP(Z4_E_INDEX) + #endif + #undef Z4_DIAG_PIN + #endif +#endif + +#ifndef Z4_CS_PIN + #define Z4_CS_PIN -1 +#endif +#ifndef Z4_MS1_PIN + #define Z4_MS1_PIN -1 +#endif +#ifndef Z4_MS2_PIN + #define Z4_MS2_PIN -1 +#endif +#ifndef Z4_MS3_PIN + #define Z4_MS3_PIN -1 +#endif + +#if HAS_MARLINUI_U8GLIB + #if !defined(ST7920_DELAY_1) && defined(BOARD_ST7920_DELAY_1) + #define ST7920_DELAY_1 BOARD_ST7920_DELAY_1 + #endif + #if !defined(ST7920_DELAY_2) && defined(BOARD_ST7920_DELAY_2) + #define ST7920_DELAY_2 BOARD_ST7920_DELAY_2 + #endif + #if !defined(ST7920_DELAY_3) && defined(BOARD_ST7920_DELAY_3) + #define ST7920_DELAY_3 BOARD_ST7920_DELAY_3 + #endif +#else + #undef ST7920_DELAY_1 + #undef ST7920_DELAY_2 + #undef ST7920_DELAY_3 +#endif + +#undef HAS_FREE_AUX2_PINS +#undef DIAG_REMAPPED