diff --git a/Documentation/Logo/Marlin Logo LCD High.png b/Documentation/Logo/Marlin Logo LCD High.png
new file mode 100644
index 0000000000..81225c3de0
Binary files /dev/null and b/Documentation/Logo/Marlin Logo LCD High.png differ
diff --git a/Documentation/Logo/Marlin Logo LCD Low.png b/Documentation/Logo/Marlin Logo LCD Low.png
new file mode 100644
index 0000000000..34b80c4939
Binary files /dev/null and b/Documentation/Logo/Marlin Logo LCD Low.png differ
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 9b77f96f4f..dfc1965e6e 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -24,8 +24,11 @@
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
+#define STRING_VERSION "v1.0.2"
+#define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_SPLASH STRING_VERSION " - " STRING_URL // will be shown during bootup
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 50c4581a26..c2dd54bbb6 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -297,7 +297,7 @@
 // using:
 //#define MENU_ADDAUTOSTART
 
-// Show a progress bar on the LCD when printing from SD?
+// Show a progress bar on HD44780 LCDs for SD printing
 //#define LCD_PROGRESS_BAR
 
 #ifdef LCD_PROGRESS_BAR
@@ -309,6 +309,12 @@
   #define PROGRESS_MSG_EXPIRE   0
   // Enable this to show messages for MSG_TIME then hide them
   //#define PROGRESS_MSG_ONCE
+  #ifdef DOGLCD
+    #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time.
+  #endif
+  #ifdef FILAMENT_LCD_DISPLAY
+    #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both.
+  #endif
 #endif
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
diff --git a/Marlin/DOGMbitmaps.h b/Marlin/DOGMbitmaps.h
index b149b76098..b735477e3f 100644
--- a/Marlin/DOGMbitmaps.h
+++ b/Marlin/DOGMbitmaps.h
@@ -1,28 +1,78 @@
-#define START_BMPWIDTH 	60	//Width in pixels - http://www.digole.com/tools/PicturetoC_Hex_converter.php
-#define START_BMPHEIGHT 	64	//Height in pixels
-#define START_BMPBYTEWIDTH 	8	//Width in bytes
-const unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
-0x1f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
-0x30,0x00,0x00,0x00,0x00,0x00,0x3f,0xff,
-0x40,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,
-0xc0,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,
-0x80,0x83,0x00,0x00,0x01,0x80,0x07,0xff,
-0x83,0xef,0xc0,0x00,0x01,0x8c,0x03,0xff,
-0x87,0xff,0xe0,0x00,0x01,0x8c,0x01,0xff,
-0x8e,0x38,0x60,0x00,0x01,0x80,0x00,0xff,
-0x8c,0x18,0x67,0xe0,0xf9,0x8c,0x7e,0x7f,
-0x8c,0x18,0x6f,0xf1,0xfd,0x8c,0xfe,0x3f,
-0x8c,0x18,0x6e,0x31,0x8d,0x8c,0xc7,0x1f,
-0x8c,0x18,0x6c,0x39,0x8d,0x8c,0xc3,0x1f,
-0x8c,0x18,0x6c,0x19,0x81,0x8c,0xc3,0x1f,
-0x8c,0x18,0x6e,0x19,0x81,0x8c,0xc3,0x1f,
-0x8c,0x18,0x6f,0x9f,0x81,0xef,0xc3,0x1f,
-0x8c,0x18,0x67,0xdf,0x80,0xef,0xc3,0x1f,
-0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,
-0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x2f,
-0x30,0x00,0x00,0x00,0x00,0x00,0x00,0xcf,
-0x1f,0xff,0xff,0xff,0xff,0xff,0xff,0x8f
-};
+// BitMap for splashscreen
+// Generated with: http://www.digole.com/tools/PicturetoC_Hex_converter.php
+// Please note that using the high-res version takes about 0.5KB of 
+#ifdef START_BMPHIGH
+  #define START_BMPWIDTH      112
+  #define START_BMPHEIGHT      38
+  #define START_BMPBYTEWIDTH   14
+  #define START_BMPBYTES      532 // START_BMPWIDTH * START_BMPHEIGHT / 8
+  
+  const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
+     0x01,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
+    ,0x0f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
+    ,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xff,0xff
+    ,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xff,0xff
+    ,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xff,0xff
+    ,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff
+    ,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7f,0xff
+    ,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x3f,0xff
+    ,0xc0,0x0f,0xc0,0xfc,0x00,0x00,0x00,0x00,0x00,0x78,0x18,0x00,0x1f,0xff
+    ,0xc0,0x3f,0xe1,0xff,0x00,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x0f,0xff
+    ,0xc0,0x7f,0xf3,0xff,0x80,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x07,0xff
+    ,0xc0,0xff,0xff,0xff,0xc0,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x03,0xff
+    ,0xc1,0xf8,0x7f,0x87,0xe0,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x01,0xff
+    ,0xc1,0xf0,0x3f,0x03,0xe0,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0xff
+    ,0xc1,0xe0,0x1e,0x01,0xe0,0x1f,0x00,0x03,0xe0,0x78,0x3c,0x03,0xf0,0x7f
+    ,0xc1,0xe0,0x1e,0x01,0xe0,0x7f,0xc0,0x0f,0xf8,0x78,0x3c,0x07,0xfc,0x3f
+    ,0xc1,0xe0,0x1e,0x01,0xe1,0xff,0xe0,0x1f,0xfc,0x78,0x3c,0x0f,0xfe,0x1f
+    ,0xc1,0xe0,0x1e,0x01,0xe3,0xff,0xf0,0x3f,0xfe,0x78,0x3c,0x1f,0xfe,0x0f
+    ,0xc1,0xe0,0x1e,0x01,0xe3,0xf3,0xf8,0x3f,0x3e,0x78,0x3c,0x3f,0x3f,0x07
+    ,0xc1,0xe0,0x1e,0x01,0xe7,0xe0,0xfc,0x7c,0x1f,0x78,0x3c,0x3e,0x1f,0x07
+    ,0xc1,0xe0,0x1e,0x01,0xe7,0xc0,0x7c,0x7c,0x0f,0x78,0x3c,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x7c,0x78,0x0f,0x78,0x3c,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe7,0xc0,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe3,0xe0,0x3c,0x78,0x00,0x7c,0x3c,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe3,0xff,0x3f,0xf8,0x00,0x7f,0xbc,0x3c,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe1,0xff,0x3f,0xf8,0x00,0x3f,0xbf,0xfc,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe0,0xff,0x3f,0xf8,0x00,0x1f,0xbf,0xfc,0x0f,0x03
+    ,0xc1,0xe0,0x1e,0x01,0xe0,0x7f,0x3f,0xf8,0x00,0x0f,0xbf,0xfc,0x0f,0x03
+    ,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07
+    ,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06
+    ,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0e
+    ,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1c
+    ,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78
+    ,0x0f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xf0
+    ,0x01,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x80 };
+#else
+  #define START_BMPWIDTH 	    56 
+  #define START_BMPHEIGHT 	  19
+  #define START_BMPBYTEWIDTH  7
+  #define START_BMPBYTES      133 // START_BMPWIDTH * START_BMPHEIGHT / 8
+
+  const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
+     0x1f,0xff,0xff,0xff,0xff,0xff,0xff
+    ,0x60,0x00,0x00,0x00,0x00,0x01,0xff
+    ,0x40,0x00,0x00,0x00,0x00,0x00,0xff
+    ,0x80,0x00,0x00,0x00,0x00,0x00,0x7f
+    ,0x83,0xcf,0x00,0x00,0x0c,0x30,0x3f
+    ,0x87,0xff,0x80,0x00,0x0c,0x30,0x1f
+    ,0x86,0x79,0x80,0x00,0x0c,0x00,0x0f
+    ,0x8c,0x30,0xc7,0x83,0x8c,0x30,0xe7
+    ,0x8c,0x30,0xcf,0xc7,0xcc,0x31,0xf3
+    ,0x8c,0x30,0xdc,0xec,0xec,0x33,0xb9
+    ,0x8c,0x30,0xd8,0x6c,0x6c,0x33,0x19
+    ,0x8c,0x30,0xd0,0x6c,0x0c,0x33,0x19
+    ,0x8c,0x30,0xd8,0x6c,0x0c,0x33,0x19
+    ,0x8c,0x30,0xdc,0x6c,0x0e,0x3b,0x19
+    ,0x8c,0x30,0xcf,0x7c,0x07,0x9f,0x19
+    ,0x8c,0x30,0xc7,0x7c,0x03,0x8f,0x19
+    ,0x40,0x00,0x00,0x00,0x00,0x00,0x02
+    ,0x60,0x00,0x00,0x00,0x00,0x00,0x06
+    ,0x1f,0xff,0xff,0xff,0xff,0xff,0xf8 };
+#endif
 
 // Here comes a compile-time operation to match the extruder symbols 
 // on the info screen to the set number of extruders in configuration.h
diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h
index bcbe5f792d..6f595ce77f 100644
--- a/Marlin/dogm_lcd_implementation.h
+++ b/Marlin/dogm_lcd_implementation.h
@@ -1,19 +1,20 @@
 /**
- *dogm_lcd_implementation.h
+ * dogm_lcd_implementation.h
  *
- *Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
- *Demonstrator: http://www.reprap.org/wiki/STB_Electronics
- *License: http://opensource.org/licenses/BSD-3-Clause
+ * Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
+ * Demonstrator: http://www.reprap.org/wiki/STB_Electronics
+ * License: http://opensource.org/licenses/BSD-3-Clause
  *
- *With the use of:
- *u8glib by Oliver Kraus
- *http://code.google.com/p/u8glib/
- *License: http://opensource.org/licenses/BSD-3-Clause
+ * With the use of:
+ * u8glib by Oliver Kraus
+ * http://code.google.com/p/u8glib/
+ * License: http://opensource.org/licenses/BSD-3-Clause
  */
 
+#ifndef DOGM_LCD_IMPLEMENTATION_H
+#define DOGM_LCD_IMPLEMENTATION_H
 
-#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H
-#define ULTRA_LCD_IMPLEMENTATION_DOGM_H
+#define MARLIN_VERSION "1.0.2"
 
 /**
 * Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
@@ -51,12 +52,12 @@
 */
 
 // DOGM parameters (size in pixels)
-#define DOG_CHAR_WIDTH			6
-#define DOG_CHAR_HEIGHT			12
-#define DOG_CHAR_WIDTH_LARGE	9
-#define DOG_CHAR_HEIGHT_LARGE	18
+#define DOG_CHAR_WIDTH         6
+#define DOG_CHAR_HEIGHT        12
+#define DOG_CHAR_WIDTH_LARGE   9
+#define DOG_CHAR_HEIGHT_LARGE  18
 
-#define START_ROW				0
+#define START_ROW              0
 
 /* Custom characters defined in font font_6x10_marlin.c */
 #define LCD_STR_DEGREE      "\xB0"
@@ -69,7 +70,7 @@
 #define LCD_STR_BEDTEMP     "\xFE"
 #define LCD_STR_THERMOMETER "\xFF"
 
-#define FONT_STATUSMENU	u8g_font_6x9
+#define FONT_STATUSMENU u8g_font_6x9
 
 int lcd_contrast;
 
@@ -82,78 +83,64 @@ U8GLIB_ST7920_128X64_RRD u8g(0);
 U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
 #else
 // for regular DOGM128 display with HW-SPI
-U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);	// HW-SPI Com: CS, A0
+U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);  // HW-SPI Com: CS, A0
 #endif
 
 static void lcd_implementation_init()
 {
-#ifdef LCD_PIN_BL
-	pinMode(LCD_PIN_BL, OUTPUT);	// Enable LCD backlight
-	digitalWrite(LCD_PIN_BL, HIGH);
-#endif
+  #ifdef LCD_PIN_BL // Enable LCD backlight
+    pinMode(LCD_PIN_BL, OUTPUT);
+	  digitalWrite(LCD_PIN_BL, HIGH);
+  #endif
 
-        u8g.setContrast(lcd_contrast);	
-	//  Uncomment this if you have the first generation (V1.10) of STBs board
-	//  pinMode(17, OUTPUT);	// Enable LCD backlight
-	//  digitalWrite(17, HIGH);
+  u8g.setContrast(lcd_contrast);	
+	// FIXME: remove this workaround
+  // Uncomment this if you have the first generation (V1.10) of STBs board
+	// pinMode(17, OUTPUT);	// Enable LCD backlight
+	// digitalWrite(17, HIGH);
+  
+#ifdef LCD_SCREEN_ROT_90
+	u8g.setRot90();   // Rotate screen by 90°
+#elif defined(LCD_SCREEN_ROT_180)
+	u8g.setRot180();	// Rotate screen by 180°
+#elif defined(LCD_SCREEN_ROT_270)
+	u8g.setRot270();	// Rotate screen by 270°
+#endif
 	
+  // FIXME: whats the purpose of the box? Maybe clear screen?
 	u8g.firstPage();
-	do {
+  do {
 		u8g.setFont(u8g_font_6x10_marlin);
 		u8g.setColorIndex(1);
 		u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
 		u8g.setColorIndex(1);
-	   } while( u8g.nextPage() );
+	} while(u8g.nextPage());
 
-#ifdef LCD_SCREEN_ROT_90
-	u8g.setRot90();	// Rotate screen by 90°
-#endif
-
-#ifdef LCD_SCREEN_ROT_180
-	u8g.setRot180();	// Rotate screen by 180°
-#endif
-
-#ifdef LCD_SCREEN_ROT_270
-	u8g.setRot270();	// Rotate screen by 270°
-#endif
-
-   
+  // Show splashscreen
+  int off = (u8g.getWidth() - START_BMPWIDTH) / 2;
+  int txtX = (u8g.getWidth() - sizeof(STRING_SPLASH) - 1) / 2;
+  int txtY = u8g.getHeight() - 10;
 	u8g.firstPage();
 	do {
-			// RepRap init bmp
-			u8g.drawBitmapP(7,7,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
-			// Welcome message
+    #ifdef START_BMPHIGH
+		  u8g.drawBitmapP(off, off, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
+    #else
+      u8g.setScale2x2();
+		  u8g.drawBitmapP(off, off, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
+      u8g.undoScale();
+    #endif
 			
-			
-			
-			u8g.setFont(u8g_font_5x8);
-			u8g.drawStr(7,51,"V1.0.2 - marlin.reprap.org");
-			
-	   } while( u8g.nextPage() );
+    u8g.setFont(u8g_font_5x8);
+		u8g.drawStr(txtX, txtY, STRING_SPLASH);
+	} while(u8g.nextPage());
 }
 
-static void lcd_implementation_clear()
-{
-// NO NEED TO IMPLEMENT LIKE SO. Picture loop automatically clears the display.
-//
-// Check this article: http://arduino.cc/forum/index.php?topic=91395.25;wap2
-//
-//	u8g.firstPage();
-//	do {	
-//			u8g.setColorIndex(0);
-//			u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
-//			u8g.setColorIndex(1);
-//		} while( u8g.nextPage() );
-}
+static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
 
 /* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
-static void lcd_printPGM(const char* str)
-{
-    char c;
-    while((c = pgm_read_byte(str++)) != '\0')
-    {
-			u8g.print(c);
-    }
+static void lcd_printPGM(const char* str) {
+  char c;
+  while ((c = pgm_read_byte(str++))) u8g.print(c);
 }
 
 static void _draw_heater_status(int x, int heater) {
@@ -176,49 +163,44 @@ static void _draw_heater_status(int x, int heater) {
   }
 }
 
-static void lcd_implementation_status_screen()
-{
+static void lcd_implementation_status_screen() {
 
- static unsigned char fan_rot = 0;
+  static unsigned char fan_rot = 0;
  
- u8g.setColorIndex(1);	// black on white
+  u8g.setColorIndex(1); // black on white
+
+  // Symbols menu graphics, animated fan
+  u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
  
- // Symbols menu graphics, animated fan
- u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
+  #ifdef SDSUPPORT
+    // SD Card Symbol
+    u8g.drawBox(42,42,8,7);
+    u8g.drawBox(50,44,2,5);
+    u8g.drawFrame(42,49,10,4);
+    u8g.drawPixel(50,43);
+
+    // Progress bar frame
+    u8g.drawFrame(54,49,73,4);
+
+    // SD Card Progress bar and clock
+    u8g.setFont(FONT_STATUSMENU);
  
- #ifdef SDSUPPORT
- //SD Card Symbol
- u8g.drawBox(42,42,8,7);
- u8g.drawBox(50,44,2,5);
- u8g.drawFrame(42,49,10,4);
- u8g.drawPixel(50,43);
- // Progress bar
- u8g.drawFrame(54,49,73,4);
- 
- // SD Card Progress bar and clock
- u8g.setFont(FONT_STATUSMENU);
- 
- if (IS_SD_PRINTING)
-   {
-	// Progress bar
-	u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
-   }
+    if (IS_SD_PRINTING) {
+      // Progress bar solid part
+      u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
+    }
+
+    u8g.setPrintPos(80,47);
+    if (starttime != 0) {
+      uint16_t time = millis()/60000 - starttime/60000;
+      u8g.print(itostr2(time/60));
+      u8g.print(':');
+      u8g.print(itostr2(time%60));
+    }
     else {
-			// do nothing
-		 }
- 
- u8g.setPrintPos(80,47);
- if(starttime != 0)
-    {
-        uint16_t time = millis()/60000 - starttime/60000;
-
-		u8g.print(itostr2(time/60));
-		u8g.print(':');
-		u8g.print(itostr2(time%60));
-    }else{
-			lcd_printPGM(PSTR("--:--"));
-		 }
- #endif
+      lcd_printPGM(PSTR("--:--"));
+    }
+  #endif
  
   // Extruders
   _draw_heater_status(6, 0);
@@ -232,107 +214,101 @@ static void lcd_implementation_status_screen()
   // Heatbed
   _draw_heater_status(81, -1);
  
- // Fan
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(104,27);
- #if defined(FAN_PIN) && FAN_PIN > -1
- u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
- u8g.print("%");
- #else
- u8g.print("---");
- #endif
- 
- 
- // X, Y, Z-Coordinates
- u8g.setFont(FONT_STATUSMENU);
- u8g.drawBox(0,29,128,10);
- u8g.setColorIndex(0);	// white on black
- u8g.setPrintPos(2,37);
- u8g.print("X");
- u8g.drawPixel(8,33);
- u8g.drawPixel(8,35);
- u8g.setPrintPos(10,37);
- u8g.print(ftostr31ns(current_position[X_AXIS]));
- u8g.setPrintPos(43,37);
- lcd_printPGM(PSTR("Y"));
- u8g.drawPixel(49,33);
- u8g.drawPixel(49,35);
- u8g.setPrintPos(51,37);
- u8g.print(ftostr31ns(current_position[Y_AXIS]));
- u8g.setPrintPos(83,37);
- u8g.print("Z");
- u8g.drawPixel(89,33);
- u8g.drawPixel(89,35);
- u8g.setPrintPos(91,37);
- u8g.print(ftostr31(current_position[Z_AXIS]));
- u8g.setColorIndex(1);	// black on white
- 
- // Feedrate
- u8g.setFont(u8g_font_6x10_marlin);
- u8g.setPrintPos(3,49);
- u8g.print(LCD_STR_FEEDRATE[0]);
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(12,48);
- u8g.print(itostr3(feedmultiply));
- u8g.print('%');
+  // Fan
+  u8g.setFont(FONT_STATUSMENU);
+  u8g.setPrintPos(104,27);
+  #if defined(FAN_PIN) && FAN_PIN > -1
+    u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
+    u8g.print("%");
+  #else
+    u8g.print("---");
+  #endif
 
- // Status line
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(0,61);
- #ifndef FILAMENT_LCD_DISPLAY
- 	u8g.print(lcd_status_message);
- #else
-	if(message_millis+5000>millis()){  //Display both Status message line and Filament display on the last line
-	 u8g.print(lcd_status_message);
- 	}
- 	else
-	{
-	 lcd_printPGM(PSTR("dia:"));
-	 u8g.print(ftostr12ns(filament_width_meas));
-	 lcd_printPGM(PSTR(" factor:"));
-	 u8g.print(itostr3(extrudemultiply));
-	 u8g.print('%');
-	}
- #endif 	
+  // X, Y, Z-Coordinates
+  u8g.setFont(FONT_STATUSMENU);
+  u8g.drawBox(0,29,128,10);
+  u8g.setColorIndex(0); // white on black
+  u8g.setPrintPos(2,37);
+  u8g.print("X");
+  u8g.drawPixel(8,33);
+  u8g.drawPixel(8,35);
+  u8g.setPrintPos(10,37);
+  u8g.print(ftostr31ns(current_position[X_AXIS]));
+  u8g.setPrintPos(43,37);
+  lcd_printPGM(PSTR("Y"));
+  u8g.drawPixel(49,33);
+  u8g.drawPixel(49,35);
+  u8g.setPrintPos(51,37);
+  u8g.print(ftostr31ns(current_position[Y_AXIS]));
+  u8g.setPrintPos(83,37);
+  u8g.print("Z");
+  u8g.drawPixel(89,33);
+  u8g.drawPixel(89,35);
+  u8g.setPrintPos(91,37);
+  u8g.print(ftostr31(current_position[Z_AXIS]));
+  u8g.setColorIndex(1); // black on white
+ 
+  // Feedrate
+  u8g.setFont(u8g_font_6x10_marlin);
+  u8g.setPrintPos(3,49);
+  u8g.print(LCD_STR_FEEDRATE[0]);
+  u8g.setFont(FONT_STATUSMENU);
+  u8g.setPrintPos(12,48);
+  u8g.print(itostr3(feedmultiply));
+  u8g.print('%');
 
+  // Status line
+  u8g.setFont(FONT_STATUSMENU);
+  u8g.setPrintPos(0,61);
+  #ifndef FILAMENT_LCD_DISPLAY
+    u8g.print(lcd_status_message);
+  #else
+    if (millis() < message_millis + 5000) {  //Display both Status message line and Filament display on the last line
+      u8g.print(lcd_status_message);
+    }
+    else {
+      lcd_printPGM(PSTR("dia:"));
+      u8g.print(ftostr12ns(filament_width_meas));
+      lcd_printPGM(PSTR(" factor:"));
+      u8g.print(itostr3(extrudemultiply));
+      u8g.print('%');
+    }
+  #endif
 }
 
-static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
-{
-    char c;
-    
-    uint8_t n = LCD_WIDTH - 1 - 2;
-		
-		if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] ))
-		   {
-			u8g.setColorIndex(1);		// black on white
-			u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
-			u8g.setColorIndex(0);		// following text must be white on black
-		   } else u8g.setColorIndex(1); // unmarked text is black on white
-		
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		u8g.print(pre_char == '>' ? ' ' : pre_char);	// Row selector is obsolete
+static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
+  char c;
+  
+  uint8_t n = LCD_WIDTH - 1 - 2;
+  
+  if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] )) {
+    u8g.setColorIndex(1);  // black on white
+    u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
+    u8g.setColorIndex(0);  // following text must be white on black
+  }
+  else {
+    u8g.setColorIndex(1); // unmarked text is black on white
+  }
+  
+  u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
+  u8g.print(pre_char == '>' ? ' ' : pre_char);  // Row selector is obsolete
 
-
-    while( (c = pgm_read_byte(pstr)) != '\0' )
-    {
-		u8g.print(c);
-        pstr++;
-        n--;
-    }
-    while(n--){
-					u8g.print(' ');
-		}
-	   
-		u8g.print(post_char);
-		u8g.print(' ');
-		u8g.setColorIndex(1);		// restore settings to black on white
+  while((c = pgm_read_byte(pstr))) {
+    u8g.print(c);
+    pstr++;
+    n--;
+  }
+  while(n--) u8g.print(' ');
+  
+  u8g.print(post_char);
+  u8g.print(' ');
+  u8g.setColorIndex(1);  // restore settings to black on white
 }
 
 static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
   char c;
   uint8_t n = LCD_WIDTH - 1 - 2 - (pgm ? strlen_P(data) : strlen(data));
-		
+
   u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
   u8g.print(pre_char);
 
@@ -391,14 +367,13 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
 #define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
 #define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
 
-void lcd_implementation_drawedit(const char* pstr, char* value)
-{
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
-		u8g.setFont(u8g_font_9x18);
-		lcd_printPGM(pstr);
-		u8g.print(':');
-		u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
-		u8g.print(value);
+void lcd_implementation_drawedit(const char* pstr, char* value) {
+  u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
+  u8g.setFont(u8g_font_9x18);
+  lcd_printPGM(pstr);
+  u8g.print(':');
+  u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
+  u8g.print(value);
 }
 
 static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir, bool isSelected) {
@@ -417,7 +392,7 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
   }
 
   u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-  u8g.print(' ');	// Indent by 1 char
+  u8g.print(' '); // Indent by 1 char
 
   if (isDir) u8g.print(LCD_STR_FOLDER[0]);
 
@@ -445,20 +420,16 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
 #define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
 #define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
 
-static void lcd_implementation_quick_feedback()
-{
-
-#if BEEPER > -1
+static void lcd_implementation_quick_feedback() {
+  #if BEEPER > -1
     SET_OUTPUT(BEEPER);
-    for(int8_t i=0;i<10;i++)
-    {
-		WRITE(BEEPER,HIGH);
-		delay(3);
-		WRITE(BEEPER,LOW);
-		delay(3);
+    for(int8_t i=0; i<10; i++) {
+      WRITE(BEEPER,HIGH);
+      delay(3);
+      WRITE(BEEPER,LOW);
+      delay(3);
     }
-#endif
+  #endif
 }
-#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H
-
 
+#endif //__DOGM_LCD_IMPLEMENTATION_H
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index f380d45ccc..db9073e18f 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -196,7 +196,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
     if (feedback) lcd_quick_feedback();
 
     // For LCD_PROGRESS_BAR re-initialize the custom characters
-    #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+    #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
       lcd_set_custom_characters(menu == lcd_status_screen);
     #endif
   }
@@ -205,7 +205,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
 /* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
 static void lcd_status_screen()
 {
-  #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+  #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
     uint16_t mil = millis();
     #ifndef PROGRESS_MSG_ONCE
       if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
@@ -237,11 +237,12 @@ static void lcd_status_screen()
         lcd_status_update_delay--;
     else
         lcdDrawUpdate = 1;
-    if (lcdDrawUpdate)
-    {
+
+    if (lcdDrawUpdate) {
         lcd_implementation_status_screen();
         lcd_status_update_delay = 10;   /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
     }
+
 #ifdef ULTIPANEL
 
     bool current_click = LCD_CLICKED;
@@ -266,7 +267,7 @@ static void lcd_status_screen()
     {
         lcd_goto_menu(lcd_main_menu);
         lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
-          #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+          #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
             currentMenu == lcd_status_screen
           #endif
         );
@@ -1216,7 +1217,7 @@ void lcd_update()
         lcdDrawUpdate = 2;
         lcd_oldcardstatus = IS_SD_INSERTED;
         lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
-          #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+          #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
             currentMenu == lcd_status_screen
           #endif
         );
@@ -1319,7 +1320,7 @@ void lcd_finishstatus() {
     }
   }
   lcd_status_message[LCD_WIDTH] = '\0';
-  #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+  #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
     #if PROGRESS_MSG_EXPIRE > 0
       messageTick =
     #endif
diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h
index a175f4a757..30175be39d 100644
--- a/Marlin/ultralcd.h
+++ b/Marlin/ultralcd.h
@@ -49,7 +49,7 @@
   #ifdef FILAMENT_LCD_DISPLAY
         extern unsigned long message_millis;
   #endif
-    
+
   void lcd_buzz(long duration,uint16_t freq);
   bool lcd_clicked();