🔨 Fix HAL/STM32 F103Zx builds (#22610)

2021-08-30 17:02:12 -05:00 · 2021-08-30 17:02:12 -05:00 · 086fa0f0a7
commit 086fa0f0a7
parent 5e97f37a78
10 changed files with 66 additions and 74 deletions
--- a/Marlin/src/gcode/motion/G2_G3.cpp
+++ b/Marlin/src/gcode/motion/G2_G3.cpp
@ -217,7 +217,7 @@ void plan_arc(
   * tool precision in some cases. Therefore, arc path correction is implemented.
   *
   * Small angle approximation may be used to reduce computation overhead further. This approximation
-   * holds for everything, but very small circles and large MM_PER_ARC_SEGMENT values. In other words,
+   * holds for everything, but very small circles and large MAX_ARC_SEGMENT_MM values. In other words,
   * theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large
   * to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for
   * numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an
--- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
+++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
@ -147,6 +147,9 @@
  #define FSMC_CS_PIN                       PD7   // NE4
  #define FSMC_RS_PIN                       PD11  // A0

+  #define TFT_CS_PIN                 FSMC_CS_PIN
+  #define TFT_RS_PIN                 FSMC_RS_PIN
+
  #define LCD_USE_DMA_FSMC                        // Use DMA transfers to send data to the TFT
  #define FSMC_DMA_DEV                      DMA2
  #define FSMC_DMA_CHANNEL               DMA_CH5
--- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_E3_RRF/hal_conf_extra.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_E3_RRF/hal_conf_extra.h
@ -8,7 +8,7 @@
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
-//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it?
+//#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
 #define HAL_SPI_MODULE_ENABLED
 #define HAL_TIM_MODULE_ENABLED
 #define HAL_USART_MODULE_ENABLED
--- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_GTR_V1/hal_conf_extra.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_GTR_V1/hal_conf_extra.h
@ -8,7 +8,7 @@
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
-//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it?
+//#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
 #define HAL_SPI_MODULE_ENABLED
 #define HAL_TIM_MODULE_ENABLED
 #define HAL_USART_MODULE_ENABLED
--- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/hal_conf_extra.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/hal_conf_extra.h
@ -8,7 +8,7 @@
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
-//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it?
+//#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
 #define HAL_SPI_MODULE_ENABLED
 #define HAL_TIM_MODULE_ENABLED
 #define HAL_USART_MODULE_ENABLED
--- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_SKR_PRO_11/hal_conf_extra.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_SKR_PRO_11/hal_conf_extra.h
@ -8,7 +8,7 @@
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
-//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it?
+//#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
 #define HAL_SPI_MODULE_ENABLED
 #define HAL_TIM_MODULE_ENABLED
 #define HAL_USART_MODULE_ENABLED
--- a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h
@ -20,25 +20,18 @@ extern "C" {
  */
 #include "stm32yyxx_hal_conf.h"

-#ifdef HAL_PWR_MODULE_ENABLED
-  #undef HAL_PWR_MODULE_ENABLED // only way to disable it
-#endif
+#undef HAL_PWR_MODULE_ENABLED
+#define HAL_PWR_MODULE_ONLY   // disable low power & PA0 wakeup pin (its T°c pin)

-#if defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY)
-  #define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin)
-#endif
-
-#ifndef HAL_IWDG_MODULE_ENABLED
-  #define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG
-#endif
+#define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG

 #ifdef HAL_PCD_MODULE_ENABLED
-  #warning No direct STM32 USB pins on Longer3D board
+  #warning "No direct STM32 USB pins on Longer3D board"
  #undef HAL_PCD_MODULE_ENABLED // USB Device
 #endif

 #ifdef HAL_HCD_MODULE_ENABLED
-  #warning No direct STM32 USB pins on Longer3D board
+  #warning "No direct STM32 USB pins on Longer3D board"
  #undef HAL_HCD_MODULE_ENABLED // USB Host
 #endif

@ -46,25 +39,12 @@ extern "C" {
  //#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE do it
 #endif

-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #undef HAL_CAN_LEGACY_MODULE_ENABLED
-#endif
+#undef HAL_CAN_LEGACY_MODULE_ENABLED
+#undef HAL_CAN_MODULE_ENABLED
+#undef HAL_DAC_MODULE_ENABLED
+#undef HAL_RTC_MODULE_ENABLED

-#ifdef HAL_CAN_MODULE_ENABLED
-  #undef HAL_CAN_MODULE_ENABLED
-#endif
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #undef HAL_DAC_MODULE_ENABLED
-#endif
-
-#ifdef HAL_RTC_MODULE_ENABLED
-  #undef HAL_RTC_MODULE_ENABLED
-#endif
-
-#ifndef HAL_EXTI_MODULE_ENABLED
-  #define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE
-#endif
+#define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE

 /**
  * @brief List of modules in the framework (first ones enabled by default)
@ -345,4 +325,3 @@ extern "C" {
 #ifdef __cplusplus
 }
 #endif
-
--- a/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/PinNamesVar.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/PinNamesVar.h
@ -1,5 +1,6 @@
 /* SYS_WKUP */
-#ifdef PWR_WAKEUP_PIN1
+#if defined(PWR_WAKEUP_PIN1) && defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY)
+  #error "PA0 is used by thermal sensor. Disable low power wake with -DHAL_PWR_MODULE_ONLY."
  SYS_WKUP1 = PA_0,
 #endif
 #ifdef PWR_WAKEUP_PIN2
--- a/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/hal_conf_custom.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/hal_conf_custom.h
@ -37,40 +37,43 @@ extern "C" {
 /**
  * @brief This is the list of modules to be used in the HAL driver
  */
-//#define HAL_MODULE_ENABLED
-//#define HAL_ADC_MODULE_ENABLED
-//#define HAL_CAN_MODULE_ENABLED
-//#define HAL_CAN_LEGACY_MODULE_ENABLED
-//#define HAL_CEC_MODULE_ENABLED
-//#define HAL_CORTEX_MODULE_ENABLED
-//#define HAL_CRC_MODULE_ENABLED
-//#define HAL_DAC_MODULE_ENABLED
-//#define HAL_DMA_MODULE_ENABLED
-//#define HAL_ETH_MODULE_ENABLED
-//#define HAL_EXTI_MODULE_ENABLED
-//#define HAL_FLASH_MODULE_ENABLED
-//#define HAL_GPIO_MODULE_ENABLED
-//#define HAL_HCD_MODULE_ENABLED
-//#define HAL_I2C_MODULE_ENABLED
-//#define HAL_I2S_MODULE_ENABLED
-//#define HAL_IRDA_MODULE_ENABLED
-//#define HAL_IWDG_MODULE_ENABLED
-//#define HAL_NAND_MODULE_ENABLED
-//#define HAL_NOR_MODULE_ENABLED
-//#define HAL_PCCARD_MODULE_ENABLED
-//#define HAL_PCD_MODULE_ENABLED
-//#define HAL_PWR_MODULE_ENABLED
-//#define HAL_RCC_MODULE_ENABLED
-//#define HAL_RTC_MODULE_ENABLED
-//#define HAL_SD_MODULE_ENABLED
-//#define HAL_SMARTCARD_MODULE_ENABLED
-//#define HAL_SPI_MODULE_ENABLED
-//#define HAL_SRAM_MODULE_ENABLED
-//#define HAL_TIM_MODULE_ENABLED
-//#define HAL_UART_MODULE_ENABLED
-//#define HAL_USART_MODULE_ENABLED
-//#define HAL_WWDG_MODULE_ENABLED
-//#define HAL_MMC_MODULE_ENABLED
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+//#define HAL_UART_MODULE_ENABLED // by default
+//#define HAL_PCD_MODULE_ENABLED  // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
+#define HAL_SD_MODULE_ENABLED
+
+#undef HAL_CAN_MODULE_ENABLED
+#undef HAL_CAN_LEGACY_MODULE_ENABLED
+#undef HAL_CEC_MODULE_ENABLED
+#undef HAL_DAC_MODULE_ENABLED
+#undef HAL_ETH_MODULE_ENABLED
+#undef HAL_HCD_MODULE_ENABLED         // USB Host
+#undef HAL_I2S_MODULE_ENABLED
+#undef HAL_IRDA_MODULE_ENABLED
+#undef HAL_NAND_MODULE_ENABLED
+#undef HAL_NOR_MODULE_ENABLED
+#undef HAL_PCCARD_MODULE_ENABLED
+#undef HAL_PWR_MODULE_ENABLED
+#undef HAL_RTC_MODULE_ENABLED
+#undef HAL_SMARTCARD_MODULE_ENABLED
+#undef HAL_WWDG_MODULE_ENABLED
+#undef HAL_MMC_MODULE_ENABLED
+
+#define HAL_PWR_MODULE_ONLY

 /* ########################## Oscillator Values adaptation ####################*/
 /**
--- a/ini/stm32f1.ini
+++ b/ini/stm32f1.ini
@ -348,9 +348,15 @@ debug_tool                  = stlink
 # TRIGORILLA PRO (STM32F103ZET6)
 #
 [env:trigorilla_pro]
-platform      = ${common_stm32.platform}
-extends       = env:mks_robin
-extra_scripts = ${common_stm32.extra_scripts}
+platform             = ${stm32_variant.platform}
+extends              = stm32_variant
+board                = genericSTM32F103ZE
+board_build.variant  = MARLIN_F103Zx
+board_build.offset   = 0x7000
+build_flags          = ${stm32_variant.build_flags}
+                       -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
+build_unflags        = ${stm32_variant.build_unflags}
+                       -DUSBCON -DUSBD_USE_CDC

 #
 # Chitu boards like Tronxy X5s (STM32F103ZET6)