bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

♻️ Move watchdog to MarlinHAL

Browse Source
This commit is contained in:
Scott Lahteine
2022-05-22 20:45:37 -05:00
parent 209c792ef7
commit 07cd248b91
64 changed files with 510 additions and 1106 deletions
Download Patch File Download Diff File Expand all files Collapse all files

41
Marlin/src/HAL/STM32F1/HAL.cpp
View File

@@ -113,6 +113,47 @@
#endif
#endif
// ------------------------
// Watchdog Timer
// ------------------------
#if ENABLED(USE_WATCHDOG)
#include <libmaple/iwdg.h>
void watchdogSetup() {
// do whatever. don't remove this function.
}
/**
* The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
#define STM32F1_WD_RELOAD TERN(WATCHDOG_DURATION_8S, 1250, 625) // 4 or 8 second timeout
/**
* @brief Initialize the independent hardware watchdog.
*
* @return No return
*
* @details The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
void MarlinHAL::watchdog_init() {
#if DISABLED(DISABLE_WATCHDOG_INIT)
iwdg_init(IWDG_PRE_256, STM32F1_WD_RELOAD);
#endif
}
// Reset watchdog. MUST be called every 4 or 8 seconds after the
// first watchdog_init or the STM32F1 will reset.
void MarlinHAL::watchdog_refresh() {
#if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
TOGGLE(LED_PIN); // heartbeat indicator
#endif
iwdg_feed();
}
#endif // USE_WATCHDOG
// ------------------------
// ADC
// ------------------------

5
Marlin/src/HAL/STM32F1/HAL.h
View File

@@ -34,7 +34,6 @@
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include <stdint.h>
#include <util/atomic.h>
@@ -247,6 +246,10 @@ public:
// Earliest possible init, before setup()
MarlinHAL() {}
// Watchdog
static void watchdog_init() IF_DISABLED(USE_WATCHDOG, {});
static void watchdog_refresh() IF_DISABLED(USE_WATCHDOG, {});
static void init(); // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0

3
Marlin/src/HAL/STM32F1/MinSerial.cpp
View File

@@ -27,7 +27,6 @@
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/MinSerial.h"
#include "watchdog.h"
#include <libmaple/usart.h>
#include <libmaple/rcc.h>
@@ -82,7 +81,7 @@ static void TX(char c) {
#if WITHIN(SERIAL_PORT, 1, 6)
struct usart_dev* dev = MYSERIAL1.c_dev();
while (!(dev->regs->SR & USART_SR_TXE)) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
hal.watchdog_refresh();
sw_barrier();
}
dev->regs->DR = c;

66
Marlin/src/HAL/STM32F1/watchdog.cpp
View File

@@ -1,66 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include <libmaple/iwdg.h>
#include "watchdog.h"
/**
* The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
#define STM32F1_WD_RELOAD TERN(WATCHDOG_DURATION_8S, 1250, 625) // 4 or 8 second timeout
void HAL_watchdog_refresh() {
#if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
TOGGLE(LED_PIN); // heartbeat indicator
#endif
iwdg_feed();
}
void watchdogSetup() {
// do whatever. don't remove this function.
}
/**
* @brief Initialized the independent hardware watchdog.
*
* @return No return
*
* @details The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
void watchdog_init() {
#if DISABLED(DISABLE_WATCHDOG_INIT)
iwdg_init(IWDG_PRE_256, STM32F1_WD_RELOAD);
#endif
}
#endif // USE_WATCHDOG
#endif // __STM32F1__

35
Marlin/src/HAL/STM32F1/watchdog.h
View File

@@ -1,35 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
*/
#include <libmaple/iwdg.h>
// Initialize watchdog with a 4 or 8 second countdown time
void watchdog_init();
// Reset watchdog. MUST be called every 4 or 8 seconds after the
// first watchdog_init or the STM32F1 will reset.
void HAL_watchdog_refresh();