From 06e965e29c1e553347e595f0421ea4b788bb36ad Mon Sep 17 00:00:00 2001 From: sanek88lbl <42996016+sanek88lbl@users.noreply.github.com> Date: Sun, 9 May 2021 01:06:21 +0300 Subject: [PATCH] Lerdge K EEPROM and TFT (#21812) Co-authored-by: Scott Lahteine --- .github/workflows/test-builds.yml | 1 + Marlin/src/HAL/shared/eeprom_if_i2c.cpp | 10 +++- Marlin/src/lcd/tft_io/st7796s.h | 4 +- Marlin/src/pins/stm32f4/pins_LERDGE_K.h | 62 ++++++++++++++++++------- buildroot/tests/LERDGEK | 18 +++++++ ini/features.ini | 1 + ini/stm32f4.ini | 3 +- 7 files changed, 76 insertions(+), 23 deletions(-) create mode 100755 buildroot/tests/LERDGEK diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml index b228783799..5c676398bb 100644 --- a/.github/workflows/test-builds.yml +++ b/.github/workflows/test-builds.yml @@ -80,6 +80,7 @@ jobs: - mks_robin_pro - STM32F103RET6_creality - LERDGEX + - LERDGEK - mks_robin_nano35 # Put lengthy tests last diff --git a/Marlin/src/HAL/shared/eeprom_if_i2c.cpp b/Marlin/src/HAL/shared/eeprom_if_i2c.cpp index f6dd33b7c4..27f0233562 100644 --- a/Marlin/src/HAL/shared/eeprom_if_i2c.cpp +++ b/Marlin/src/HAL/shared/eeprom_if_i2c.cpp @@ -30,11 +30,17 @@ #if ENABLED(I2C_EEPROM) #include "eeprom_if.h" -#include + +#if ENABLED(SOFT_I2C_EEPROM) + #include + SlowSoftWire Wire = SlowSoftWire(I2C_SDA_PIN, I2C_SCL_PIN, true); +#else + #include +#endif void eeprom_init() { Wire.begin( - #if PINS_EXIST(I2C_SCL, I2C_SDA) + #if PINS_EXIST(I2C_SCL, I2C_SDA) && DISABLED(SOFT_I2C_EEPROM) uint8_t(I2C_SDA_PIN), uint8_t(I2C_SCL_PIN) #endif ); diff --git a/Marlin/src/lcd/tft_io/st7796s.h b/Marlin/src/lcd/tft_io/st7796s.h index 8653a49ca2..e1931ed551 100644 --- a/Marlin/src/lcd/tft_io/st7796s.h +++ b/Marlin/src/lcd/tft_io/st7796s.h @@ -154,6 +154,9 @@ static const uint16_t st7796s_init[] = { static const uint16_t lerdge_st7796s_init[] = { DATASIZE_8BIT, + ESC_REG(ST7796S_SWRESET), ESC_DELAY(100), + ESC_REG(ST7796S_SLPOUT), ESC_DELAY(20), + ESC_REG(ST7796S_CSCON), 0x00C3, // enable command 2 part I ESC_REG(ST7796S_CSCON), 0x0096, // enable command 2 part II @@ -165,7 +168,6 @@ static const uint16_t lerdge_st7796s_init[] = { ESC_REG(ST7796S_PWR2), 0x0015, ESC_REG(ST7796S_PWR3), 0x00AF, - ESC_REG(0xC3), 0x0009, // Register not documented in datasheet ESC_REG(ST7796S_VCMPCTL), 0x0022, ESC_REG(ST7796S_VCMOST), 0x0000, ESC_REG(ST7796S_DOCA), 0x0040, 0x008A, 0x0000, 0x0000, 0x0029, 0x0019, 0x00A5, 0x0033, diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index 1bc7bbc99e..b92056ea86 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -28,7 +28,14 @@ #define BOARD_INFO_NAME "Lerdge K" #define DEFAULT_MACHINE_NAME "LERDGE" -#define I2C_EEPROM +// EEPROM +#if NO_EEPROM_SELECTED + #define I2C_EEPROM + #define SOFT_I2C_EEPROM // Force the use of Software I2C + #define I2C_SCL_PIN PG14 + #define I2C_SDA_PIN PG13 + #define MARLIN_EEPROM_SIZE 0x10000 +#endif // USB Flash Drive support #define HAS_OTG_USB_HOST_SUPPORT @@ -36,7 +43,7 @@ // // Servos // -//#define SERVO0_PIN PB11 +#define SERVO0_PIN PB11 // // Limit Switches @@ -96,6 +103,13 @@ // #define E1_CS_PIN PE4 //#endif +//#define E2_STEP_PIN PF4 // best guess +//#define E2_DIR_PIN PF3 // best guess +//#define E2_ENABLE_PIN PF5 // best guess +//#ifndef E2_CS_PIN +// #define E2_CS_PIN PB2 // best guess +//#endif + #if HAS_TMC_UART /** * TMC2208/TMC2209 stepper drivers @@ -163,13 +177,19 @@ #ifndef FAN_PIN #define FAN_PIN PF7 #endif + #define FAN1_PIN PF6 -#define FAN2_PIN PF8 #ifndef E0_AUTO_FAN_PIN - #define E0_AUTO_FAN_PIN PF6 + #define E0_AUTO_FAN_PIN PB1 #endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN PB0 +#endif + +#define CONTROLLER_FAN_PIN PF8 + // // LED / Lighting // @@ -177,10 +197,10 @@ //#define CASE_LIGHT_PIN_DO -1 //#define NEOPIXEL_PIN -1 #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PB7 + #define RGB_LED_R_PIN PB8 // swap R and G pin for compatibility with real wires #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PB8 + #define RGB_LED_G_PIN PB7 #endif #ifndef RGB_LED_B_PIN #define RGB_LED_B_PIN PB9 @@ -197,7 +217,7 @@ // #define SDSS PC11 #define LED_PIN PA15 // Alive -#define PS_ON_PIN -1 +#define PS_ON_PIN PA4 #define KILL_PIN -1 #define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT @@ -213,17 +233,23 @@ // LCD / Controller // -#define TFT_RESET_PIN PD6 -#define TFT_BACKLIGHT_PIN PD3 +#if HAS_FSMC_TFT + //#define TFT_DRIVER LERDGE_ST7796 -#define TFT_CS_PIN PD7 -#define TFT_RS_PIN PD11 + #define TFT_RESET_PIN PD6 + #define TFT_BACKLIGHT_PIN PD3 -#define TOUCH_CS_PIN PG15 -#define TOUCH_SCK_PIN PB3 -#define TOUCH_MOSI_PIN PB5 -#define TOUCH_MISO_PIN PB4 + #define TFT_CS_PIN PD7 + #define TFT_RS_PIN PD11 -#define BTN_EN1 PG10 -#define BTN_EN2 PG11 -#define BTN_ENC PG9 + #define TOUCH_CS_PIN PG15 + #define TOUCH_SCK_PIN PB3 + #define TOUCH_MOSI_PIN PB5 + #define TOUCH_MISO_PIN PB4 +#endif + +#if IS_NEWPANEL + #define BTN_EN1 PG10 + #define BTN_EN2 PG11 + #define BTN_ENC PG9 +#endif diff --git a/buildroot/tests/LERDGEK b/buildroot/tests/LERDGEK new file mode 100755 index 0000000000..1aca42c18a --- /dev/null +++ b/buildroot/tests/LERDGEK @@ -0,0 +1,18 @@ +#!/usr/bin/env bash +# +# Build tests for LERDGEK environment +# + +# exit on first failure +set -e + +# +# Build with the typical configuration +# +restore_configs +opt_set MOTHERBOARD BOARD_LERDGE_K SERIAL_PORT 1 +opt_enable TFT_GENERIC TFT_INTERFACE_FSMC TFT_COLOR_UI +exec_test $1 $2 "LERDGE K with Generic FSMC TFT with ColorUI" "$3" + +# clean up +restore_configs diff --git a/ini/features.ini b/ini/features.ini index 871741dca8..6fa74a343f 100644 --- a/ini/features.ini +++ b/ini/features.ini @@ -41,6 +41,7 @@ HAS_(FSMC|SPI|LTDC)_TFT = src_filter=+ + + HAS_SPI_TFT = src_filter=+ + I2C_EEPROM = src_filter=+ +SOFT_I2C_EEPROM = SlowSoftI2CMaster, SlowSoftWire=https://github.com/felias-fogg/SlowSoftWire/archive/master.zip SPI_EEPROM = src_filter=+ HAS_GRAPHICAL_TFT = src_filter=+ DWIN_CREALITY_LCD = src_filter=+ diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini index ff99296877..325dc4b502 100644 --- a/ini/stm32f4.ini +++ b/ini/stm32f4.ini @@ -308,8 +308,7 @@ build_flags = ${stm_flash_drive.build_flags} platform = ${lerdge_common.platform} extends = lerdge_common board_build.firmware = Lerdge_K_firmware_force.bin -build_flags = ${lerdge_common.build_flags} - -DLERDGEK +build_flags = ${lerdge_common.build_flags} -DLERDGEK # # Lerdge K with USB Flash Drive Support