bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Update SD card connection / sharing options (#14325)

Browse Source
This commit is contained in:
Andy Shaw 2019-06-26 09:55:57 +01:00 committed by Scott Lahteine
parent 9f136a7c67
commit 064177154c
100 changed files with 1508 additions and 860 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
Marlin/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

8
Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
View File

@ -69,11 +69,3 @@
#if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) #if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI" #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI"
#endif #endif
#if 1 < (ENABLED(LPC_SD_CUSTOM_CABLE) + ENABLED(LPC_SD_LCD) + ENABLED(LPC_SD_ONBOARD))
#error "Enable only one of LPC_SD_CUSTOM_CABLE, LPC_SD_LCD, or LPC_SD_ONBOARD."
#endif
#if 1 < (ENABLED(USB_SD_DISABLED) + ENABLED(USB_SD_ONBOARD))
#error "Enable only one of USB_SD_DISABLED or USB_SD_ONBOARD."
#endif

8
Marlin/src/HAL/HAL_LPC1768/main.cpp
View File

@ -81,8 +81,8 @@ void HAL_init() {
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SS_PIN, HIGH);
#endif #endif
#if defined(ONBOARD_SD_CS) && ONBOARD_SD_CS > -1 #if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SS_PIN
OUT_WRITE(ONBOARD_SD_CS, HIGH); OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH);
#endif #endif
USB_Init(); // USB Initialization USB_Init(); // USB Initialization
@ -90,7 +90,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice delay(1000); // Give OS time to notice
USB_Connect(TRUE); USB_Connect(TRUE);
#if DISABLED(USB_SD_DISABLED) #if !BOTH(SHARED_SD_CARD, INIT_SDCARD_ON_BOOT) && DISABLED(NO_SD_HOST_DRIVE)
MSC_SD_Init(0); // Enable USB SD card access MSC_SD_Init(0); // Enable USB SD card access
#endif #endif
@ -117,7 +117,7 @@ void HAL_init() {
// HAL idle task // HAL idle task
void HAL_idletask(void) { void HAL_idletask(void) {
#if BOTH(SDSUPPORT, SHARED_SD_CARD) #if ENABLED(SHARED_SD_CARD)
// If Marlin is using the SD card we need to lock it to prevent access from // If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB. // a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but // Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but

2
Marlin/src/Marlin.cpp
View File

@ -1098,7 +1098,7 @@ void setup() {
init_closedloop(); init_closedloop();
#endif #endif
#if ENABLED(SDSUPPORT) && DISABLED(ULTRA_LCD) #if ENABLED(INIT_SDCARD_ON_BOOT) && DISABLED(ULTRA_LCD)
card.beginautostart(); card.beginautostart();
#endif #endif

13
Marlin/src/core/drivers.h
View File

@ -48,8 +48,8 @@
#define _TMC5160 5160 #define _TMC5160 5160
#define _TMC5160_STANDALONE 5161 #define _TMC5160_STANDALONE 5161
#define _ACTUAL(V) _CAT(_, V) #define _DRIVER_ID(V) _CAT(_, V)
#define _AXIS_DRIVER_TYPE(A,T) (defined(A##_DRIVER_TYPE) && _ACTUAL(A##_DRIVER_TYPE) == _CAT(_, T)) #define _AXIS_DRIVER_TYPE(A,T) (_DRIVER_ID(A##_DRIVER_TYPE) == _CAT(_, T))
#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T) #define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T) #define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
@ -116,3 +116,12 @@
|| AXIS_DRIVER_TYPE(A,TMC2209) \ || AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \ || AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) ) || AXIS_DRIVER_TYPE(A,TMC5160) )
//
// Stretching 'drivers.h' to include LPC SD options
//
#define _SDCARD_LCD 1
#define _SDCARD_ONBOARD 2
#define _SDCARD_CUSTOM_CABLE 3
#define _SDCARD_ID(V) _CAT(_SDCARD_, V)
#define SD_CONNECTION_IS(V) (_SDCARD_ID(SDCARD_CONNECTION) == _SDCARD_ID(V))

15
Marlin/src/inc/Conditionals_post.h
View File

@ -1727,3 +1727,18 @@
#define LCD_HEIGHT 2 #define LCD_HEIGHT 2
#endif #endif
#endif #endif
//
// The external SD card is not used. Hardware SPI is used to access the card.
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
//
#if ENABLED(SDSUPPORT)
#if SD_CONNECTION_IS(ONBOARD) && DISABLED(NO_SD_HOST_DRIVE)
#undef SD_DETECT_PIN
#define SHARED_SD_CARD
#endif
#if DISABLED(SHARED_SD_CARD)
#define INIT_SDCARD_ON_BOOT
#endif
#endif

6
Marlin/src/inc/SanityCheck.h
View File

@ -362,6 +362,12 @@
#error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration." #error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration."
#elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) #elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
#error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h." #error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h."
#elif defined(LPC_SD_LCD) || defined(LPC_SD_ONBOARD) || defined(LPC_SD_CUSTOM_CABLE)
#error "LPC_SD_(LCD|ONBOARD|CUSTOM_CABLE) are now SDCARD_CONNECTION. Please update your Configuration_adv.h."
#elif defined(USB_SD_DISABLED)
#error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
#elif defined(USB_SD_ONBOARD)
#error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
#endif #endif
#define BOARD_MKS_13 -47 #define BOARD_MKS_13 -47

8
Marlin/src/lcd/ultralcd.cpp
View File

@ -104,7 +104,7 @@
#endif #endif
#endif #endif
#if ENABLED(SDSUPPORT) #if ENABLED(INIT_SDCARD_ON_BOOT)
uint8_t lcd_sd_status; uint8_t lcd_sd_status;
#endif #endif
@ -319,8 +319,10 @@ void MarlinUI::init() {
#if PIN_EXISTS(SD_DETECT) #if PIN_EXISTS(SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN); SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif #endif
#if ENABLED(INIT_SDCARD_ON_BOOT)
lcd_sd_status = 2; // UNKNOWN lcd_sd_status = 2; // UNKNOWN
#endif #endif
#endif
#if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS #if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS
slow_buttons = 0; slow_buttons = 0;
@ -770,7 +772,7 @@ void MarlinUI::update() {
#endif // HAS_LCD_MENU #endif // HAS_LCD_MENU
#if ENABLED(SDSUPPORT) #if ENABLED(INIT_SDCARD_ON_BOOT)
const uint8_t sd_status = (uint8_t)IS_SD_INSERTED(); const uint8_t sd_status = (uint8_t)IS_SD_INSERTED();
if (sd_status != lcd_sd_status && detected()) { if (sd_status != lcd_sd_status && detected()) {
@ -811,7 +813,7 @@ void MarlinUI::update() {
#endif #endif
} }
#endif // SDSUPPORT #endif // INIT_SDCARD_ON_BOOT
if (ELAPSED(ms, next_lcd_update_ms) if (ELAPSED(ms, next_lcd_update_ms)
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD

20
Marlin/src/pins/pins_AZSMZ_MINI.h
View File

@ -86,7 +86,7 @@
#define FAN1_PIN P0_26 #define FAN1_PIN P0_26
#define LCD_SDSS P0_16 // LCD SD chip select #define LCD_SDSS P0_16 // LCD SD chip select
#define ONBOARD_SD_CS P0_06 // On board SD chip select #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if ENABLED(AZSMZ_12864) #if ENABLED(AZSMZ_12864)
#define BEEPER_PIN P1_30 #define BEEPER_PIN P1_30
@ -95,28 +95,24 @@
#define BTN_EN1 P4_28 #define BTN_EN1 P4_28
#define BTN_EN2 P1_27 #define BTN_EN2 P1_27
#define BTN_ENC P3_26 #define BTN_ENC P3_26
#if DISABLED(LPC_SD_ONBOARD) #ifndef SDCARD_CONNECTION
#define LPC_SD_LCD #define SDCARD_CONNECTION LCD
#endif #endif
#endif #endif
#if ENABLED(LPC_SD_LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN LCD_SDSS #define SS_PIN LCD_SDSS
#define SD_DETECT_PIN P3_25 #define SD_DETECT_PIN P3_25
#elif ENABLED(LPC_SD_ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS #define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
// //

27
Marlin/src/pins/pins_AZTEEG_X5_MINI.h
View File

@ -189,30 +189,23 @@
// //
// SD Support // SD Support
// //
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#define LPC_SD_ONBOARD #define SDCARD_CONNECTION ONBOARD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN P1_23 // Chip select for SD card used by Marlin #define SS_PIN P1_23
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif

30
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
View File

@ -255,36 +255,26 @@
// SD Support // SD Support
// //
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION LCD
#define USB_SD_ONBOARD
#define LPC_SD_LCD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN P0_16 // Chip select for SD card used by Marlin #define SS_PIN P0_16
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
//#define SD_DETECT_PIN P0_27 // (57) open-drain #define SD_DETECT_PIN P0_27
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
/** /**

45
Marlin/src/pins/pins_BIQU_SKR_V1.1.h
View File

@ -118,39 +118,30 @@
// MKS_MINI_12864 strongly prefers the SD card on the display and // MKS_MINI_12864 strongly prefers the SD card on the display and
// requires jumpers on the SKR V1.1 board as documented here: // requires jumpers on the SKR V1.1 board as documented here:
// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/ // https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#if ENABLED(MKS_MINI_12864) #if ENABLED(MKS_MINI_12864)
#define LPC_SD_LCD #define SDCARD_CONNECTION LCD
#undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#else #else
#define USB_SD_ONBOARD #define SDCARD_CONNECTION ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN P1_23 // Chip select for SD card used by Marlin #define SS_PIN P1_23
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD) #define SD_DETECT_PIN P0_27
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
// Trinamic driver support // Trinamic driver support
@ -232,11 +223,11 @@
// EXAMPLES // EXAMPLES
// Example 1: No LCD attached or a TFT style display using the AUX header RX/TX pins. // Example 1: No LCD attached or a TFT style display using the AUX header RX/TX pins.
// LPC_SD_LCD must not be enabled. Nothing should be connected to EXP1/EXP2. // SDCARD_CONNECTION must not be 'LCD'. Nothing should be connected to EXP1/EXP2.
//#define SKR_USE_LCD_PINS_FOR_CS //#define SKR_USE_LCD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_PINS_FOR_CS) #if ENABLED(SKR_USE_LCD_PINS_FOR_CS)
#if ENABLED(LPC_SD_LCD) #if SD_CONNECTION_IS(LCD)
#error "LPC_SD_LCD must not be enabled with SKR_USE_LCD_PINS_FOR_CS." #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS."
#endif #endif
#define X_CS_PIN P1_23 #define X_CS_PIN P1_23
#define Y_CS_PIN P3_26 #define Y_CS_PIN P3_26
@ -247,11 +238,11 @@
// Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// The SD card reader attached to the LCD (if present) can't be used because // The SD card reader attached to the LCD (if present) can't be used because
// the pins will be in use. So LPC_SD_LCD must not be defined. // the pins will be in use. So SDCARD_CONNECTION must not be 'LCD'.
//#define SKR_USE_LCD_SD_CARD_PINS_FOR_CS //#define SKR_USE_LCD_SD_CARD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS) #if ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS)
#if ENABLED(LPC_SD_LCD) #if SD_CONNECTION_IS(LCD)
#error "LPC_SD_LCD must not be enabled with SKR_USE_LCD_SD_CARD_PINS_FOR_CS." #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
#endif #endif
#define X_CS_PIN P0_02 #define X_CS_PIN P0_02
#define Y_CS_PIN P0_03 #define Y_CS_PIN P0_03

28
Marlin/src/pins/pins_COHESION3D_REMIX.h
View File

@ -213,35 +213,25 @@
// //
// SD Support // SD Support
// //
#if NONE(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION ONBOARD
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3 #define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3 #define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3 #define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC the LCD menu options are
// needed to mount/unmount and refresh SD. So disable SD detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // No SD detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
// //

34
Marlin/src/pins/pins_MKS_SBASE.h
View File

@ -158,13 +158,13 @@
#define ENET_TXD0 P1_00 // J12-11 #define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12 #define ENET_TXD1 P1_01 // J12-12
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION ONBOARD
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#if ENABLED(LPC_SD_CUSTOM_CABLE) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(CUSTOM_CABLE)
/** /**
* A custom cable is needed. See the README file in the * A custom cable is needed. See the README file in the
@ -182,37 +182,23 @@
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) #define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) #define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9) #define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9)
#define SS_PIN P0_28 // Chip select for SD card used by Marlin #define SS_PIN P0_28
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
#define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the #define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the
// selected pins are not on a hardware SPI controller // selected pins are not on a hardware SPI controller
#elif ENABLED(LPC_SD_LCD) #elif SD_CONNECTION_IS(LCD)
// use standard cable and header, SPI and SD detect sre shared with on-board SD card // use standard cable and header, SPI and SD detect sre shared with on-board SD card
// hardware SPI is used for both SD cards. The detect pin is shred between the // hardware SPI is used for both SD cards. The detect pin is shred between the
// LCD and onboard SD readers so we disable it. // LCD and onboard SD readers so we disable it.
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_28 // Chip select for SD card used by Marlin #define SS_PIN P0_28
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#elif ENABLED(LPC_SD_ONBOARD)
// The external SD card is not used. Hardware SPI is used to access the card.
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#else
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
#endif #endif
/** /**

28
Marlin/src/pins/pins_RAMPS_RE_ARM.h
View File

@ -413,35 +413,25 @@
// //
// SD Support // SD Support
// //
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION ONBOARD
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 #define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 #define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 #define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
/** /**

24
config/default/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Anet/A2/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Anet/A6/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Anet/A8/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Anet/E16/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/ArmEd/Configuration_adv.h
View File

@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -1042,19 +1042,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Cartesio/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Einstart-S/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Felix/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -1033,19 +1033,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Fysetc/AIO_II/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Fysetc/CHEETAH/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Fysetc/F6_13/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Geeetech/A10/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/JGAurora/A1/Configuration_adv.h
View File

@ -1039,19 +1039,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/JGAurora/A5S/Configuration_adv.h
View File

@ -1039,19 +1039,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/MakerParts/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -1035,19 +1035,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/RigidBot/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/SCARA/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Tevo/Tarantula Pro/Configuration_adv.h
View File

@ -1030,19 +1030,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/TheBorg/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/UltiMachine/Archim1/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/VORONDesign/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -1047,19 +1047,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/WASP/PowerWASP/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/MKS/SBASE/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/Tevo Little Monster/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/generic/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/makibox/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

24
config/examples/wt150/Configuration_adv.h
View File

@ -1035,19 +1035,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *