🐛 Fix G2/G3 Arcs stutter / JD speed (#24362)
This commit is contained in:
tombrazier
Scott Lahteine
parent
106537ff43
commit
0523874e9c
@ -197,8 +197,8 @@ void plan_arc(
|
||||
// Feedrate for the move, scaled by the feedrate multiplier
|
||||
const feedRate_t scaled_fr_mm_s = MMS_SCALED(feedrate_mm_s);
|
||||
|
||||
// Get the nominal segment length based on settings
|
||||
const float nominal_segment_mm = (
|
||||
// Get the ideal segment length for the move based on settings
|
||||
const float ideal_segment_mm = (
|
||||
#if ARC_SEGMENTS_PER_SEC // Length based on segments per second and feedrate
|
||||
constrain(scaled_fr_mm_s * RECIPROCAL(ARC_SEGMENTS_PER_SEC), MIN_ARC_SEGMENT_MM, MAX_ARC_SEGMENT_MM)
|
||||
#else
|
||||
@ -206,19 +206,18 @@ void plan_arc(
|
||||
#endif
|
||||
);
|
||||
|
||||
// Number of whole segments based on the nominal segment length
|
||||
const float nominal_segments = _MAX(FLOOR(flat_mm / nominal_segment_mm), min_segments);
|
||||
// Number of whole segments based on the ideal segment length
|
||||
const float nominal_segments = _MAX(FLOOR(flat_mm / ideal_segment_mm), min_segments),
|
||||
nominal_segment_mm = flat_mm / nominal_segments;
|
||||
|
||||
// A new segment length based on the required minimum
|
||||
const float segment_mm = constrain(flat_mm / nominal_segments, MIN_ARC_SEGMENT_MM, MAX_ARC_SEGMENT_MM);
|
||||
// The number of whole segments in the arc, with best attempt to honor MIN_ARC_SEGMENT_MM and MAX_ARC_SEGMENT_MM
|
||||
const uint16_t segments = nominal_segment_mm > (MAX_ARC_SEGMENT_MM) ? CEIL(flat_mm / (MAX_ARC_SEGMENT_MM)) :
|
||||
nominal_segment_mm < (MIN_ARC_SEGMENT_MM) ? _MAX(1, FLOOR(flat_mm / (MIN_ARC_SEGMENT_MM))) :
|
||||
nominal_segments;
|
||||
|
||||
// The number of whole segments in the arc, ignoring the remainder
|
||||
uint16_t segments = FLOOR(flat_mm / segment_mm);
|
||||
|
||||
// Are the segments now too few to reach the destination?
|
||||
const float segmented_length = segment_mm * segments;
|
||||
const bool tooshort = segmented_length < flat_mm - 0.0001f;
|
||||
const float proportion = tooshort ? segmented_length / flat_mm : 1.0f;
|
||||
#if ENABLED(SCARA_FEEDRATE_SCALING)
|
||||
const float inv_duration = (scaled_fr_mm_s / flat_mm) * segments;
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Vector rotation by transformation matrix: r is the original vector, r_T is the rotated vector,
|
||||
@ -246,108 +245,106 @@ void plan_arc(
|
||||
* a correction, the planner should have caught up to the lag caused by the initial plan_arc overhead.
|
||||
* This is important when there are successive arc motions.
|
||||
*/
|
||||
// Vector rotation matrix values
|
||||
|
||||
xyze_pos_t raw;
|
||||
const float theta_per_segment = proportion * angular_travel / segments,
|
||||
sq_theta_per_segment = sq(theta_per_segment),
|
||||
sin_T = theta_per_segment - sq_theta_per_segment * theta_per_segment / 6,
|
||||
cos_T = 1 - 0.5f * sq_theta_per_segment; // Small angle approximation
|
||||
|
||||
#if DISABLED(AUTO_BED_LEVELING_UBL)
|
||||
ARC_LIJKUVW_CODE(
|
||||
const float per_segment_L = proportion * travel_L / segments,
|
||||
const float per_segment_I = proportion * travel_I / segments,
|
||||
const float per_segment_J = proportion * travel_J / segments,
|
||||
const float per_segment_K = proportion * travel_K / segments,
|
||||
const float per_segment_U = proportion * travel_U / segments,
|
||||
const float per_segment_V = proportion * travel_V / segments,
|
||||
const float per_segment_W = proportion * travel_W / segments
|
||||
// do not calculate rotation parameters for trivial single-segment arcs
|
||||
if (segments > 1) {
|
||||
// Vector rotation matrix values
|
||||
const float theta_per_segment = angular_travel / segments,
|
||||
sq_theta_per_segment = sq(theta_per_segment),
|
||||
sin_T = theta_per_segment - sq_theta_per_segment * theta_per_segment / 6,
|
||||
cos_T = 1 - 0.5f * sq_theta_per_segment; // Small angle approximation
|
||||
|
||||
#if DISABLED(AUTO_BED_LEVELING_UBL)
|
||||
ARC_LIJKUVW_CODE(
|
||||
const float per_segment_L = travel_L / segments,
|
||||
const float per_segment_I = travel_I / segments,
|
||||
const float per_segment_J = travel_J / segments,
|
||||
const float per_segment_K = travel_K / segments,
|
||||
const float per_segment_U = travel_U / segments,
|
||||
const float per_segment_V = travel_V / segments,
|
||||
const float per_segment_W = travel_W / segments
|
||||
);
|
||||
#endif
|
||||
|
||||
CODE_ITEM_E(const float extruder_per_segment = travel_E / segments);
|
||||
|
||||
// Initialize all linear axes and E
|
||||
ARC_LIJKUVWE_CODE(
|
||||
raw[axis_l] = current_position[axis_l],
|
||||
raw.i = current_position.i,
|
||||
raw.j = current_position.j,
|
||||
raw.k = current_position.k,
|
||||
raw.u = current_position.u,
|
||||
raw.v = current_position.v,
|
||||
raw.w = current_position.w,
|
||||
raw.e = current_position.e
|
||||
);
|
||||
#endif
|
||||
|
||||
CODE_ITEM_E(const float extruder_per_segment = proportion * travel_E / segments);
|
||||
|
||||
// For shortened segments, run all but the remainder in the loop
|
||||
if (tooshort) segments++;
|
||||
|
||||
// Initialize all linear axes and E
|
||||
ARC_LIJKUVWE_CODE(
|
||||
raw[axis_l] = current_position[axis_l],
|
||||
raw.i = current_position.i,
|
||||
raw.j = current_position.j,
|
||||
raw.k = current_position.k,
|
||||
raw.u = current_position.u,
|
||||
raw.v = current_position.v,
|
||||
raw.w = current_position.w,
|
||||
raw.e = current_position.e
|
||||
);
|
||||
|
||||
#if ENABLED(SCARA_FEEDRATE_SCALING)
|
||||
const float inv_duration = scaled_fr_mm_s / segment_mm;
|
||||
#endif
|
||||
|
||||
millis_t next_idle_ms = millis() + 200UL;
|
||||
|
||||
#if N_ARC_CORRECTION > 1
|
||||
int8_t arc_recalc_count = N_ARC_CORRECTION;
|
||||
#endif
|
||||
|
||||
for (uint16_t i = 1; i < segments; i++) { // Iterate (segments-1) times
|
||||
|
||||
thermalManager.manage_heater();
|
||||
const millis_t ms = millis();
|
||||
if (ELAPSED(ms, next_idle_ms)) {
|
||||
next_idle_ms = ms + 200UL;
|
||||
idle();
|
||||
}
|
||||
millis_t next_idle_ms = millis() + 200UL;
|
||||
|
||||
#if N_ARC_CORRECTION > 1
|
||||
if (--arc_recalc_count) {
|
||||
// Apply vector rotation matrix to previous rvec.a / 1
|
||||
const float r_new_Y = rvec.a * sin_T + rvec.b * cos_T;
|
||||
rvec.a = rvec.a * cos_T - rvec.b * sin_T;
|
||||
rvec.b = r_new_Y;
|
||||
int8_t arc_recalc_count = N_ARC_CORRECTION;
|
||||
#endif
|
||||
|
||||
for (uint16_t i = 1; i < segments; i++) { // Iterate (segments-1) times
|
||||
|
||||
thermalManager.manage_heater();
|
||||
const millis_t ms = millis();
|
||||
if (ELAPSED(ms, next_idle_ms)) {
|
||||
next_idle_ms = ms + 200UL;
|
||||
idle();
|
||||
}
|
||||
else
|
||||
#endif
|
||||
{
|
||||
|
||||
#if N_ARC_CORRECTION > 1
|
||||
arc_recalc_count = N_ARC_CORRECTION;
|
||||
if (--arc_recalc_count) {
|
||||
// Apply vector rotation matrix to previous rvec.a / 1
|
||||
const float r_new_Y = rvec.a * sin_T + rvec.b * cos_T;
|
||||
rvec.a = rvec.a * cos_T - rvec.b * sin_T;
|
||||
rvec.b = r_new_Y;
|
||||
}
|
||||
else
|
||||
#endif
|
||||
{
|
||||
#if N_ARC_CORRECTION > 1
|
||||
arc_recalc_count = N_ARC_CORRECTION;
|
||||
#endif
|
||||
|
||||
// Arc correction to radius vector. Computed only every N_ARC_CORRECTION increments.
|
||||
// Compute exact location by applying transformation matrix from initial radius vector(=-offset).
|
||||
// To reduce stuttering, the sin and cos could be computed at different times.
|
||||
// For now, compute both at the same time.
|
||||
const float cos_Ti = cos(i * theta_per_segment), sin_Ti = sin(i * theta_per_segment);
|
||||
rvec.a = -offset[0] * cos_Ti + offset[1] * sin_Ti;
|
||||
rvec.b = -offset[0] * sin_Ti - offset[1] * cos_Ti;
|
||||
}
|
||||
|
||||
// Update raw location
|
||||
raw[axis_p] = center_P + rvec.a;
|
||||
raw[axis_q] = center_Q + rvec.b;
|
||||
ARC_LIJKUVWE_CODE(
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
raw[axis_l] = start_L,
|
||||
raw.i = start_I, raw.j = start_J, raw.k = start_K,
|
||||
raw.u = start_U, raw.v = start_V, raw.w = start_V
|
||||
#else
|
||||
raw[axis_l] += per_segment_L,
|
||||
raw.i += per_segment_I, raw.j += per_segment_J, raw.k += per_segment_K,
|
||||
raw.u += per_segment_U, raw.v += per_segment_V, raw.w += per_segment_W
|
||||
#endif
|
||||
, raw.e += extruder_per_segment
|
||||
);
|
||||
|
||||
apply_motion_limits(raw);
|
||||
|
||||
#if HAS_LEVELING && !PLANNER_LEVELING
|
||||
planner.apply_leveling(raw);
|
||||
#endif
|
||||
|
||||
// Arc correction to radius vector. Computed only every N_ARC_CORRECTION increments.
|
||||
// Compute exact location by applying transformation matrix from initial radius vector(=-offset).
|
||||
// To reduce stuttering, the sin and cos could be computed at different times.
|
||||
// For now, compute both at the same time.
|
||||
const float cos_Ti = cos(i * theta_per_segment), sin_Ti = sin(i * theta_per_segment);
|
||||
rvec.a = -offset[0] * cos_Ti + offset[1] * sin_Ti;
|
||||
rvec.b = -offset[0] * sin_Ti - offset[1] * cos_Ti;
|
||||
if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0 OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)))
|
||||
break;
|
||||
}
|
||||
|
||||
// Update raw location
|
||||
raw[axis_p] = center_P + rvec.a;
|
||||
raw[axis_q] = center_Q + rvec.b;
|
||||
ARC_LIJKUVWE_CODE(
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
raw[axis_l] = start_L,
|
||||
raw.i = start_I, raw.j = start_J, raw.k = start_K,
|
||||
raw.u = start_U, raw.v = start_V, raw.w = start_V
|
||||
#else
|
||||
raw[axis_l] += per_segment_L,
|
||||
raw.i += per_segment_I, raw.j += per_segment_J, raw.k += per_segment_K,
|
||||
raw.u += per_segment_U, raw.v += per_segment_V, raw.w += per_segment_W
|
||||
#endif
|
||||
, raw.e += extruder_per_segment
|
||||
);
|
||||
|
||||
apply_motion_limits(raw);
|
||||
|
||||
#if HAS_LEVELING && !PLANNER_LEVELING
|
||||
planner.apply_leveling(raw);
|
||||
#endif
|
||||
|
||||
if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0 OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)))
|
||||
break;
|
||||
}
|
||||
|
||||
// Ensure last segment arrives at target location.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user