Split up STM32 pins files (#17212)
This commit is contained in:
Scott Lahteine
GitHub
133
Marlin/src/pins/stm32f7/pins_REMRAM_V1.h
Normal file
133
Marlin/src/pins/stm32f7/pins_REMRAM_V1.h
Normal file
@ -0,0 +1,133 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef STM32F7xx
|
||||
#error "Oops! Select an STM32F7 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "RemRam v1"
|
||||
#define DEFAULT_MACHINE_NAME "RemRam"
|
||||
|
||||
#define SRAM_EEPROM_EMULATION // Emulate the EEPROM using Backup SRAM
|
||||
|
||||
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "RemRam supports only one hotend / E-stepper."
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#if DISABLED(SENSORLESS_HOMING)
|
||||
#define X_MIN_PIN 58
|
||||
#define X_MAX_PIN 59
|
||||
#define Y_MIN_PIN 60
|
||||
#define Y_MAX_PIN 61
|
||||
#define Z_MIN_PIN 62
|
||||
#define Z_MAX_PIN 63
|
||||
#else
|
||||
#define X_STOP_PIN 36
|
||||
#define Y_STOP_PIN 39
|
||||
#define Z_MIN_PIN 62
|
||||
#define Z_MAX_PIN 42
|
||||
#endif
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN 26 // EXT_D1
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 22
|
||||
#define X_DIR_PIN 35
|
||||
#define X_ENABLE_PIN 34
|
||||
#define X_CS_PIN 14
|
||||
|
||||
#define Y_STEP_PIN 23
|
||||
#define Y_DIR_PIN 38
|
||||
#define Y_ENABLE_PIN 37
|
||||
#define Y_CS_PIN 15
|
||||
|
||||
#define Z_STEP_PIN 24
|
||||
#define Z_DIR_PIN 41
|
||||
#define Z_ENABLE_PIN 40
|
||||
#define Z_CS_PIN 16
|
||||
|
||||
#define E0_STEP_PIN 25
|
||||
#define E0_DIR_PIN 44
|
||||
#define E0_ENABLE_PIN 43
|
||||
#define E0_CS_PIN 10
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 64 // THERM_1
|
||||
#define TEMP_1_PIN 65 // THERM_2
|
||||
#define TEMP_BED_PIN 66 // THERM_3
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 33
|
||||
#define HEATER_BED_PIN 31
|
||||
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN 30 // "FAN1"
|
||||
#endif
|
||||
#define FAN1_PIN 32 // "FAN2"
|
||||
|
||||
#define ORIG_E0_AUTO_FAN_PIN 32 // Use this by NOT overriding E0_AUTO_FAN_PIN
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 26 // PWM_EXT1
|
||||
#define SERVO1_PIN 27 // PWM_EXT2
|
||||
|
||||
#define SDSS 57 // Onboard SD card reader
|
||||
//#define SDSS 9 // LCD SD card reader
|
||||
#define LED_PIN 21 // STATUS_LED
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#define SD_DETECT_PIN 56 // SD_CARD_DET
|
||||
#define BEEPER_PIN 46 // LCD_BEEPER
|
||||
#define LCD_PINS_RS 49 // LCD_RS
|
||||
#define LCD_PINS_ENABLE 48 // LCD_EN
|
||||
#define LCD_PINS_D4 50 // LCD_D4
|
||||
#define LCD_PINS_D5 51 // LCD_D5
|
||||
#define LCD_PINS_D6 52 // LCD_D6
|
||||
#define LCD_PINS_D7 53 // LCD_D7
|
||||
#define BTN_EN1 54 // BTN_EN1
|
||||
#define BTN_EN2 55 // BTN_EN2
|
||||
#define BTN_ENC 47 // BTN_ENC
|
||||
|
||||
//
|
||||
// Timers
|
||||
//
|
||||
|
||||
#define STEP_TIMER 2
|
||||
187
Marlin/src/pins/stm32f7/pins_THE_BORG.h
Normal file
187
Marlin/src/pins/stm32f7/pins_THE_BORG.h
Normal file
@ -0,0 +1,187 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef STM32F7
|
||||
#error "Oops! Select an STM32F7 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 3 || E_STEPPERS > 3
|
||||
#error "The-Borg supports up to 3 hotends / E-steppers."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "The-Borge"
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
|
||||
#ifndef E2END
|
||||
#define E2END 0xFFF // EEPROM end address
|
||||
#endif
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PE9
|
||||
#define X_MAX_PIN PE10
|
||||
#define Y_MIN_PIN PE7
|
||||
#define Y_MAX_PIN PE8
|
||||
#define Z_MIN_PIN PF15
|
||||
#define Z_MAX_PIN PG0
|
||||
#define E_MIN_PIN PE2
|
||||
#define E_MAX_PIN PE3
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PA4
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define STEPPER_ENABLE_PIN PE0
|
||||
|
||||
#define X_STEP_PIN PC6 // 96, 39 in Arduino
|
||||
#define X_DIR_PIN PC7
|
||||
#define X_ENABLE_PIN PC8
|
||||
|
||||
|
||||
#define Y_STEP_PIN PD9
|
||||
#define Y_DIR_PIN PD10
|
||||
#define Y_ENABLE_PIN PD11
|
||||
|
||||
#define Z_STEP_PIN PE15
|
||||
#define Z_DIR_PIN PG1
|
||||
#define Z_ENABLE_PIN PD8
|
||||
|
||||
|
||||
#define E0_STEP_PIN PB1
|
||||
#define E0_DIR_PIN PB2
|
||||
#define E0_ENABLE_PIN PE11
|
||||
|
||||
|
||||
#define E1_STEP_PIN PC4
|
||||
#define E1_DIR_PIN PC5
|
||||
#define E1_ENABLE_PIN PB0
|
||||
|
||||
|
||||
#define E2_STEP_PIN PC13
|
||||
#define E2_DIR_PIN PC14
|
||||
#define E2_ENABLE_PIN PC15
|
||||
|
||||
#define Z2_STEP_PIN PC13
|
||||
#define Z2_DIR_PIN PC14
|
||||
#define Z2_ENABLE_PIN PC15
|
||||
|
||||
|
||||
#define SCK_PIN PA5
|
||||
#define MISO_PIN PA6
|
||||
#define MOSI_PIN PA7
|
||||
|
||||
#define SPI1_SCK_PIN PA5
|
||||
#define SPI1_MISO_PIN PA6
|
||||
#define SPI1_MOSI_PIN PA7
|
||||
|
||||
#define SPI6_SCK_PIN PG13
|
||||
#define SPI6_MISO_PIN PG12
|
||||
#define SPI6_MOSI_PIN PG14
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
|
||||
#define TEMP_0_PIN PC3 // Analog Input
|
||||
#define TEMP_1_PIN PC2 // Analog Input
|
||||
#define TEMP_2_PIN PC1 // Analog Input
|
||||
#define TEMP_3_PIN PC0 // Analog Input
|
||||
|
||||
#define TEMP_BED_PIN PF10 // Analog Input
|
||||
|
||||
#define TEMP_5_PIN PE12 // Analog Input, Probe temp
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PD15
|
||||
#define HEATER_1_PIN PD14
|
||||
#define HEATER_BED_PIN PF6
|
||||
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN PD13
|
||||
#endif
|
||||
#define FAN1_PIN PA0
|
||||
#define FAN2_PIN PA1
|
||||
|
||||
#define ORIG_E0_AUTO_FAN_PIN PA1 // Use this by NOT overriding E0_AUTO_FAN_PIN
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
|
||||
//#define CASE_LIGHT_PIN_CI PF13
|
||||
//#define CASE_LIGHT_PIN_DO PF14
|
||||
//#define NEOPIXEL_PIN PF13
|
||||
|
||||
//
|
||||
// Průša i3 MK2 Multi Material Multiplexer Support
|
||||
//
|
||||
|
||||
#define E_MUX0_PIN PG3
|
||||
#define E_MUX1_PIN PG4
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
|
||||
#define SERVO0_PIN PE13
|
||||
#define SERVO1_PIN PE14
|
||||
|
||||
|
||||
#define SDSS PA8
|
||||
#define SS_PIN PA8
|
||||
#define LED_PIN PA2 // Alive
|
||||
#define PS_ON_PIN PA3
|
||||
#define KILL_PIN -1 //PD5 // EXP2-10
|
||||
#define PWR_LOSS PG5 // Power loss / nAC_FAULT
|
||||
|
||||
//
|
||||
// MAX7219_DEBUG
|
||||
//
|
||||
#define MAX7219_CLK_PIN PG10 // EXP1-1
|
||||
#define MAX7219_DIN_PIN PD7 // EXP1-3
|
||||
#define MAX7219_LOAD_PIN PD1 // EXP1-5
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
//#define SD_DETECT_PIN -1 //PB6) // EXP2-4
|
||||
#define BEEPER_PIN PG10 // EXP1-1
|
||||
#define LCD_PINS_RS PG9 // EXP1-4
|
||||
#define LCD_PINS_ENABLE PD7 // EXP1-3
|
||||
#define LCD_PINS_D4 PD1 // EXP1-5
|
||||
#define LCD_PINS_D5 PF0 // EXP1-6
|
||||
#define LCD_PINS_D6 PD3 // EXP1-7
|
||||
#define LCD_PINS_D7 PD4 // EXP1-8
|
||||
#define BTN_EN1 PD6 // EXP2-5
|
||||
#define BTN_EN2 PD0 // EXP2-3
|
||||
#define BTN_ENC PG11 // EXP1-2
|
||||
Reference in New Issue
Block a user