God damn. Sorry, my mistake, forgot to add this file.
This commit is contained in:
daid303
236
Marlin/ConfigurationStore.cpp
Normal file
236
Marlin/ConfigurationStore.cpp
Normal file
@@ -0,0 +1,236 @@
|
||||
#include "Marlin.h"
|
||||
#include "planner.h"
|
||||
#include "temperature.h"
|
||||
#include "ultralcd.h"
|
||||
#include "ConfigurationStore.h"
|
||||
|
||||
void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size)
|
||||
{
|
||||
do
|
||||
{
|
||||
eeprom_write_byte((unsigned char*)pos, *value);
|
||||
pos++;
|
||||
value++;
|
||||
}while(--size);
|
||||
}
|
||||
#define EEPROM_WRITE_VAR(pos, value) _EEPROM_writeData(pos, (uint8_t*)&value, sizeof(value))
|
||||
void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
|
||||
{
|
||||
do
|
||||
{
|
||||
*value = eeprom_read_byte((unsigned char*)pos);
|
||||
pos++;
|
||||
value++;
|
||||
}while(--size);
|
||||
}
|
||||
#define EEPROM_READ_VAR(pos, value) _EEPROM_readData(pos, (uint8_t*)&value, sizeof(value))
|
||||
//======================================================================================
|
||||
|
||||
|
||||
|
||||
|
||||
#define EEPROM_OFFSET 100
|
||||
|
||||
|
||||
// IMPORTANT: Whenever there are changes made to the variables stored in EEPROM
|
||||
// in the functions below, also increment the version number. This makes sure that
|
||||
// the default values are used whenever there is a change to the data, to prevent
|
||||
// wrong data being written to the variables.
|
||||
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
|
||||
#define EEPROM_VERSION "V07"
|
||||
|
||||
#ifdef EEPROM_SETTINGS
|
||||
void Config_StoreSettings()
|
||||
{
|
||||
char ver[4]= "000";
|
||||
int i=EEPROM_OFFSET;
|
||||
EEPROM_WRITE_VAR(i,ver); // invalidate data first
|
||||
EEPROM_WRITE_VAR(i,axis_steps_per_unit);
|
||||
EEPROM_WRITE_VAR(i,max_feedrate);
|
||||
EEPROM_WRITE_VAR(i,max_acceleration_units_per_sq_second);
|
||||
EEPROM_WRITE_VAR(i,acceleration);
|
||||
EEPROM_WRITE_VAR(i,retract_acceleration);
|
||||
EEPROM_WRITE_VAR(i,minimumfeedrate);
|
||||
EEPROM_WRITE_VAR(i,mintravelfeedrate);
|
||||
EEPROM_WRITE_VAR(i,minsegmenttime);
|
||||
EEPROM_WRITE_VAR(i,max_xy_jerk);
|
||||
EEPROM_WRITE_VAR(i,max_z_jerk);
|
||||
EEPROM_WRITE_VAR(i,max_e_jerk);
|
||||
EEPROM_WRITE_VAR(i,add_homeing);
|
||||
EEPROM_WRITE_VAR(i,plaPreheatHotendTemp);
|
||||
EEPROM_WRITE_VAR(i,plaPreheatHPBTemp);
|
||||
EEPROM_WRITE_VAR(i,plaPreheatFanSpeed);
|
||||
EEPROM_WRITE_VAR(i,absPreheatHotendTemp);
|
||||
EEPROM_WRITE_VAR(i,absPreheatHPBTemp);
|
||||
EEPROM_WRITE_VAR(i,absPreheatFanSpeed);
|
||||
#ifdef PIDTEMP
|
||||
EEPROM_WRITE_VAR(i,Kp);
|
||||
EEPROM_WRITE_VAR(i,Ki);
|
||||
EEPROM_WRITE_VAR(i,Kd);
|
||||
#else
|
||||
EEPROM_WRITE_VAR(i,3000);
|
||||
EEPROM_WRITE_VAR(i,0);
|
||||
EEPROM_WRITE_VAR(i,0);
|
||||
#endif
|
||||
char ver2[4]=EEPROM_VERSION;
|
||||
i=EEPROM_OFFSET;
|
||||
EEPROM_WRITE_VAR(i,ver2); // validate data
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Settings Stored");
|
||||
}
|
||||
#endif //EEPROM_SETTINGS
|
||||
|
||||
|
||||
#ifdef EEPROM_CHITCHAT
|
||||
void Config_PrintSettings()
|
||||
{ // Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Steps per unit:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M92 X",axis_steps_per_unit[0]);
|
||||
SERIAL_ECHOPAIR(" Y",axis_steps_per_unit[1]);
|
||||
SERIAL_ECHOPAIR(" Z",axis_steps_per_unit[2]);
|
||||
SERIAL_ECHOPAIR(" E",axis_steps_per_unit[3]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M203 X",max_feedrate[0]);
|
||||
SERIAL_ECHOPAIR(" Y",max_feedrate[1] );
|
||||
SERIAL_ECHOPAIR(" Z", max_feedrate[2] );
|
||||
SERIAL_ECHOPAIR(" E", max_feedrate[3]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M201 X" ,max_acceleration_units_per_sq_second[0] );
|
||||
SERIAL_ECHOPAIR(" Y" , max_acceleration_units_per_sq_second[1] );
|
||||
SERIAL_ECHOPAIR(" Z" ,max_acceleration_units_per_sq_second[2] );
|
||||
SERIAL_ECHOPAIR(" E" ,max_acceleration_units_per_sq_second[3]);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M204 S",acceleration );
|
||||
SERIAL_ECHOPAIR(" T" ,retract_acceleration);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm/s)");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M205 S",minimumfeedrate );
|
||||
SERIAL_ECHOPAIR(" T" ,mintravelfeedrate );
|
||||
SERIAL_ECHOPAIR(" B" ,minsegmenttime );
|
||||
SERIAL_ECHOPAIR(" X" ,max_xy_jerk );
|
||||
SERIAL_ECHOPAIR(" Z" ,max_z_jerk);
|
||||
SERIAL_ECHOPAIR(" E" ,max_e_jerk);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Home offset (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M206 X",add_homeing[0] );
|
||||
SERIAL_ECHOPAIR(" Y" ,add_homeing[1] );
|
||||
SERIAL_ECHOPAIR(" Z" ,add_homeing[2] );
|
||||
SERIAL_ECHOLN("");
|
||||
#ifdef PIDTEMP
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("PID settings:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M301 P",Kp);
|
||||
SERIAL_ECHOPAIR(" I" ,Ki/PID_dT);
|
||||
SERIAL_ECHOPAIR(" D" ,Kd*PID_dT);
|
||||
SERIAL_ECHOLN("");
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef EEPROM_SETTINGS
|
||||
void Config_RetrieveSettings()
|
||||
{
|
||||
int i=EEPROM_OFFSET;
|
||||
char stored_ver[4];
|
||||
char ver[4]=EEPROM_VERSION;
|
||||
EEPROM_READ_VAR(i,stored_ver); //read stored version
|
||||
// SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]");
|
||||
if (strncmp(ver,stored_ver,3) == 0)
|
||||
{
|
||||
// version number match
|
||||
EEPROM_READ_VAR(i,axis_steps_per_unit);
|
||||
EEPROM_READ_VAR(i,max_feedrate);
|
||||
EEPROM_READ_VAR(i,max_acceleration_units_per_sq_second);
|
||||
EEPROM_READ_VAR(i,acceleration);
|
||||
EEPROM_READ_VAR(i,retract_acceleration);
|
||||
EEPROM_READ_VAR(i,minimumfeedrate);
|
||||
EEPROM_READ_VAR(i,mintravelfeedrate);
|
||||
EEPROM_READ_VAR(i,minsegmenttime);
|
||||
EEPROM_READ_VAR(i,max_xy_jerk);
|
||||
EEPROM_READ_VAR(i,max_z_jerk);
|
||||
EEPROM_READ_VAR(i,max_e_jerk);
|
||||
EEPROM_READ_VAR(i,add_homeing);
|
||||
EEPROM_READ_VAR(i,plaPreheatHotendTemp);
|
||||
EEPROM_READ_VAR(i,plaPreheatHPBTemp);
|
||||
EEPROM_READ_VAR(i,plaPreheatFanSpeed);
|
||||
EEPROM_READ_VAR(i,absPreheatHotendTemp);
|
||||
EEPROM_READ_VAR(i,absPreheatHPBTemp);
|
||||
EEPROM_READ_VAR(i,absPreheatFanSpeed);
|
||||
#ifndef PIDTEMP
|
||||
float Kp,Ki,Kd;
|
||||
#endif
|
||||
EEPROM_READ_VAR(i,Kp);
|
||||
EEPROM_READ_VAR(i,Ki);
|
||||
EEPROM_READ_VAR(i,Kd);
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Stored settings retreived:");
|
||||
}
|
||||
else
|
||||
{
|
||||
Config_ResetDefault();
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLN("Using Default settings:");
|
||||
}
|
||||
Config_PrintSettings();
|
||||
}
|
||||
#endif
|
||||
|
||||
void Config_ResetDefault()
|
||||
{
|
||||
float tmp1[]=DEFAULT_AXIS_STEPS_PER_UNIT;
|
||||
float tmp2[]=DEFAULT_MAX_FEEDRATE;
|
||||
long tmp3[]=DEFAULT_MAX_ACCELERATION;
|
||||
for (short i=0;i<4;i++)
|
||||
{
|
||||
axis_steps_per_unit[i]=tmp1[i];
|
||||
max_feedrate[i]=tmp2[i];
|
||||
max_acceleration_units_per_sq_second[i]=tmp3[i];
|
||||
}
|
||||
acceleration=DEFAULT_ACCELERATION;
|
||||
retract_acceleration=DEFAULT_RETRACT_ACCELERATION;
|
||||
minimumfeedrate=DEFAULT_MINIMUMFEEDRATE;
|
||||
minsegmenttime=DEFAULT_MINSEGMENTTIME;
|
||||
mintravelfeedrate=DEFAULT_MINTRAVELFEEDRATE;
|
||||
max_xy_jerk=DEFAULT_XYJERK;
|
||||
max_z_jerk=DEFAULT_ZJERK;
|
||||
max_e_jerk=DEFAULT_EJERK;
|
||||
add_homeing[0] = add_homeing[1] = add_homeing[2] = 0;
|
||||
#ifdef ULTIPANEL
|
||||
plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
|
||||
plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP;
|
||||
plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
|
||||
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP;
|
||||
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
|
||||
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
|
||||
#endif
|
||||
#ifdef PIDTEMP
|
||||
Kp = DEFAULT_Kp;
|
||||
Ki = DEFAULT_Ki;
|
||||
Kd = DEFAULT_Kp;
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
Kc = DEFAULT_Kc;
|
||||
#endif//PID_ADD_EXTRUSION_RATE
|
||||
#endif//PIDTEMP
|
||||
}
|
||||
Reference in New Issue
Block a user