bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Add delta auto-calibration and configuration for Flsun AC

Browse Source
This commit is contained in:
LVD-AC 2017-03-31 21:03:38 +02:00 committed by Scott Lahteine
parent 396bd7b377
commit 03bda24d19
14 changed files with 3020 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/Conditionals_post.h
View File

@ -721,6 +721,14 @@
#ifndef DELTA_TOWER_ANGLE_TRIM_3
#define DELTA_TOWER_ANGLE_TRIM_3 0.0
#endif
#if ENABLED(DELTA_AUTO_CALIBRATION)
#ifndef H_FACTOR
#define H_FACTOR 1.00
#endif
#ifndef R_FACTOR
#define R_FACTOR -2.25
#endif
#endif
#endif
/**

7
Marlin/SanityCheck.h
View File

@ -391,6 +391,13 @@
#error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
#endif
/**
* Delta Auto calibration
*/
#if ENABLED(DELTA_AUTO_CALIBRATION) && ENABLED(NO_WORKSPACE_OFFSETS)
#error "To use DELTA_AUTO_CALIBRATION you must disable NO_WORKSPACE_OFFSETS."
#endif
/**
* Allow only one bed leveling option to be defined
*/

1743
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h Normal file
View File

File diff suppressed because it is too large Load Diff

1137
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h Normal file
View File

File diff suppressed because it is too large Load Diff

16
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h → Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -463,16 +463,24 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 280 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 85.0
// Delta calibration menu
// uncomment to add three points calibration menu option.
// See http://minow.blogspot.com/index.html#4918805519571907051
// If needed, adjust the X, Y, Z calibration coordinates
// in ultralcd.cpp@lcd_delta_calibrate_menu()
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
//#define DELTA_HOME_TO_SAFE_ZONE
@ -1080,7 +1088,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS (286.5 - 6.5) // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

19
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h → Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -431,6 +431,25 @@
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//===========================================================================
//=============================Additional Features===========================
//===========================================================================

14
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -453,6 +453,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 250 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 140.0
@ -460,6 +463,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1067,7 +1077,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 250 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

5
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@ -439,12 +439,13 @@
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 with different values (C2, C-2).
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* If R_FACTOR is too low accuracy is reduced. Too high reduces iteration speed.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif

14
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -453,6 +453,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 250 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 90.0
@ -460,6 +463,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1063,7 +1073,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 250 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

5
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@ -439,12 +439,13 @@
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 with different values (C2, C-2).
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* If R_FACTOR is too low accuracy is reduced. Too high reduces iteration speed.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif

14
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -440,6 +440,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 277 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 127.0
@ -447,6 +450,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1071,7 +1081,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 277 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

20
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@ -436,6 +436,26 @@
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//===========================================================================
//=============================Additional Features===========================
//===========================================================================

14
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -458,6 +458,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET) + 1)
// height from z=0.00 to home position
#define DELTA_HEIGHT 380 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 140.0
@ -465,6 +468,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1078,7 +1088,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 381.4 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

21
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -431,6 +431,25 @@
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//===========================================================================
//=============================Additional Features===========================
//===========================================================================