bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ New board TH3D_EZBOARD_LITE_V2 (#22621)

Browse Source
This commit is contained in:
Scott Lahteine
2021-08-24 14:55:12 -05:00
committed by Scott Lahteine
parent 6bf2be66ed
commit 02ae4bc9b9
10 changed files with 1668 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/src/core/boards.h
View File

@ -393,6 +393,7 @@
#define BOARD_ANET_ET4 4229 // ANET ET4 V1.x (STM32F407VGT6)
#define BOARD_ANET_ET4P 4230 // ANET ET4P V1.x (STM32F407VGT6)
#define BOARD_FYSETC_CHEETAH_V20 4231 // FYSETC Cheetah V2.0
#define BOARD_TH3D_EZBOARD_LITE_V2 4232 // TH3D EZBoard Lite v2.0
//
// ARM Cortex M7

2
Marlin/src/pins/pins.h
View File

@ -641,6 +641,8 @@
#include "stm32f4/pins_FYSETC_CHEETAH_V20.h" // STM32F4 env:FYSETC_CHEETAH_V20
#elif MB(MKS_MONSTER8)
#include "stm32f4/pins_MKS_MONSTER8.h" // STM32F4 env:mks_monster8 env:mks_monster8_usb_flash_drive env:mks_monster8_usb_flash_drive_msc
#elif MB(TH3D_EZBOARD_LITE_V2)
#include "stm32f4/pins_TH3D_EZBOARD_LITE_V2.h" // STM32F4 env:TH3D_EZBoard_Lite_V2
//
// ARM Cortex M7

264
Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_LITE_V2.h Normal file
View File

@ -0,0 +1,264 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define ALLOW_STM32DUINO
#include "env_validate.h"
#define BOARD_INFO_NAME "TH3D EZBoard Lite V2"
#define BOARD_WEBSITE_URL "th3dstudio.com"
//#define V3_EZABL_ON_SERVO // As in TH3D Firmware Config
#define DISABLE_JTAGSWD // Disabling J-tag and Debug via SWD
// Onboard I2C EEPROM
#if NO_EEPROM_SELECTED
#define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#define I2C_SCL_PIN PB6
#define I2C_SDA_PIN PB7
#undef NO_EEPROM_SELECTED
#endif
//
// Neopixels
//
#define NEOPIXEL_PIN PA8
//
// Servos
//
#if ENABLED(V3_EZABL_ON_SERVO)
#define SERVO0_PIN -1
#else
#define SERVO0_PIN PA2
#endif
//
// Limit Switches
//
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
// Sensorless homing pins
#if ENABLED(X_AXIS_SENSORLESS_HOMING)
#define X_STOP_PIN PB4
#else
#define X_STOP_PIN PC1
#endif
#if ENABLED(Y_AXIS_SENSORLESS_HOMING)
#define Y_STOP_PIN PB9
#else
#define Y_STOP_PIN PC2
#endif
//#define Z_STOP_PIN PC15 // Don't use sensorless homing on Z!
#define E_STOP_PIN PB10
#else
// Standard Endstop Pins
#define X_STOP_PIN PC1
#define Y_STOP_PIN PC2
#endif
#if ENABLED(V3_EZABL_ON_SERVO)
#define Z_STOP_PIN PA2
#else
#define Z_STOP_PIN PC3
#endif
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC0
#endif
//
// Steppers
//
#define X_STEP_PIN PB3
#define X_DIR_PIN PD2
#define X_ENABLE_PIN PB5
#define Y_STEP_PIN PB8
#define Y_DIR_PIN PC13
#define Y_ENABLE_PIN PC12
#define Z_STEP_PIN PA3
#define Z_DIR_PIN PB1
#define Z_ENABLE_PIN PC14
#define E0_STEP_PIN PA15
#define E0_DIR_PIN PB11
#define E0_ENABLE_PIN PB2
#if HAS_TMC_UART
//
// Hardware Serial on UART4, Single Wire, 0-3 addresses
//
#define X_SERIAL_TX_PIN PC10
#define X_SERIAL_RX_PIN PC11
#define Y_SERIAL_TX_PIN PC10
#define Y_SERIAL_RX_PIN PC11
#define Z_SERIAL_TX_PIN PC10
#define Z_SERIAL_RX_PIN PC11
#define E0_SERIAL_TX_PIN PC10
#define E0_SERIAL_RX_PIN PC11
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temp Sensors
// 3.3V max when defined as an Analog Input!
//
#define TEMP_0_PIN PA1 // Analog Input PA1
#define TEMP_BED_PIN PA0 // Analog Input PA0
//
// Heaters / Fans
//
#define HEATER_BED_PIN PC9
#define HEATER_0_PIN PC8
#ifndef FAN_PIN
#define FAN_PIN PC6
#endif
#define FAN1_PIN PC7
//
// Auto fans
//
#define AUTO_FAN_PIN PC7
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef E1_AUTO_FAN_PIN
#define E1_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef E2_AUTO_FAN_PIN
#define E2_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
//
// SD Card
//
#define SDCARD_CONNECTION ONBOARD
//#define SOFTWARE_SPI
#define CUSTOM_SPI_PINS
#define SDSS PA4
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_SS_PIN SDSS
//#define SD_DETECT_PIN -1
//#define ONBOARD_SD_CS_PIN SDSS
//
// LCD / Controller
//
/**
* ______
* 5V | 1 2 | GND
* PB15 | 3 4 | PB12
* PB13 | 5 6 PC5
* ---- | 7 8 | PC4
* PB0 | 9 10 | PA14
* ------
* EXP1
*
* LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
* defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
*
* A remote SD card is currently not supported because the pins routed to the EXP2
* connector are shared with the onboard SD card.
*/
#define EXP1_03_PIN PB15
#define EXP1_04_PIN PB12
#define EXP1_05_PIN PB13
#define EXP1_06_PIN PC5
//#define EXP1_07_PIN -1
#define EXP1_08_PIN PC4
#define EXP1_09_PIN PB0
#define EXP1_10_PIN PA14
#if ENABLED(CR10_STOCKDISPLAY)
/** ______
* 5V | 1 2 | GND
* LCD_EN | 3 4 | LCD_RS
* LCD_D4 | 5 6 EN2
* RESET | 7 8 | EN1
* ENC | 9 10 | BEEPER
* ------
*/
#ifdef DISABLE_JTAGSWD
#define BEEPER_PIN EXP1_10_PIN // Not connected in dev board
#endif
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
//#define KILL_PIN -1
#undef BOARD_ST7920_DELAY_1
#undef BOARD_ST7920_DELAY_2
#undef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_1 DELAY_NS(600)
#define BOARD_ST7920_DELAY_2 DELAY_NS(750)
#define BOARD_ST7920_DELAY_3 DELAY_NS(750)
#elif ENABLED(MKS_MINI_12864)
/** ______
* 5V | 1 2 | GND
* SPI-MOSI | 3 4 | SPI-CS
* A0 | 5 6 EN2
* -- | 7 8 | EN1
* ENC | 9 10 | SPI-SCK
* ------
*/
#define DOGLCD_CS EXP1_04_PIN
#define DOGLCD_A0 EXP1_05_PIN
#define DOGLCD_SCK EXP1_10_PIN
#define DOGLCD_MOSI EXP1_03_PIN
#define LCD_CONTRAST_INIT 160
#define LCD_CONTRAST_MIN 120
#define LCD_CONTRAST_MAX 180
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
#elif HAS_WIRED_LCD
#error "Only CR10_STOCKDISPLAY or MKS_MINI_12864 are supported with TH3D EZBoard V2."
#endif
#if EITHER(CR10_STOCKDISPLAY, MKS_MINI_12864)
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif