bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ ADVANCE_K per-extruder (#24821)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Giuliano Zaro 2022-10-10 20:49:37 +02:00 committed by Scott Lahteine
parent 8481264566
commit 0203e32c73
13 changed files with 68 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/Configuration_adv.h
View File

@ -2061,8 +2061,12 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. //#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.

22
Marlin/src/gcode/feature/advance/M900.cpp
View File

@ -27,8 +27,8 @@
#include "../../gcode.h" #include "../../gcode.h"
#include "../../../module/planner.h" #include "../../../module/planner.h"
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
float other_extruder_advance_K[EXTRUDERS]; float other_extruder_advance_K[DISTINCT_E];
uint8_t lin_adv_slot = 0; uint8_t lin_adv_slot = 0;
#endif #endif
@ -36,8 +36,8 @@
* M900: Get or Set Linear Advance K-factor * M900: Get or Set Linear Advance K-factor
* T<tool> Which tool to address * T<tool> Which tool to address
* K<factor> Set current advance K factor (Slot 0). * K<factor> Set current advance K factor (Slot 0).
* L<factor> Set secondary advance K factor (Slot 1). Requires EXTRA_LIN_ADVANCE_K. * L<factor> Set secondary advance K factor (Slot 1). Requires ADVANCE_K_EXTRA.
* S<0/1> Activate slot 0 or 1. Requires EXTRA_LIN_ADVANCE_K. * S<0/1> Activate slot 0 or 1. Requires ADVANCE_K_EXTRA.
*/ */
void GcodeSuite::M900() { void GcodeSuite::M900() {
@ -58,12 +58,12 @@ void GcodeSuite::M900() {
} }
#endif #endif
float &kref = planner.extruder_advance_K[tool_index], newK = kref; float &kref = planner.extruder_advance_K[E_INDEX_N(tool_index)], newK = kref;
const float oldK = newK; const float oldK = newK;
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
float &lref = other_extruder_advance_K[tool_index]; float &lref = other_extruder_advance_K[E_INDEX_N(tool_index)];
const bool old_slot = TEST(lin_adv_slot, tool_index), // The tool's current slot (0 or 1) const bool old_slot = TEST(lin_adv_slot, tool_index), // The tool's current slot (0 or 1)
new_slot = parser.boolval('S', old_slot); // The passed slot (default = current) new_slot = parser.boolval('S', old_slot); // The passed slot (default = current)
@ -111,9 +111,9 @@ void GcodeSuite::M900() {
if (!parser.seen_any()) { if (!parser.seen_any()) {
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
#if EXTRUDERS < 2 #if DISTINCT_E < 2
SERIAL_ECHOLNPGM("Advance S", new_slot, " K", kref, "(S", !new_slot, " K", lref, ")"); SERIAL_ECHOLNPGM("Advance S", new_slot, " K", kref, "(S", !new_slot, " K", lref, ")");
#else #else
EXTRUDER_LOOP() { EXTRUDER_LOOP() {
@ -127,7 +127,7 @@ void GcodeSuite::M900() {
#else #else
SERIAL_ECHO_START(); SERIAL_ECHO_START();
#if EXTRUDERS < 2 #if DISTINCT_E < 2
SERIAL_ECHOLNPGM("Advance K=", planner.extruder_advance_K[0]); SERIAL_ECHOLNPGM("Advance K=", planner.extruder_advance_K[0]);
#else #else
SERIAL_ECHOPGM("Advance K"); SERIAL_ECHOPGM("Advance K");
@ -145,7 +145,7 @@ void GcodeSuite::M900() {
void GcodeSuite::M900_report(const bool forReplay/*=true*/) { void GcodeSuite::M900_report(const bool forReplay/*=true*/) {
report_heading(forReplay, F(STR_LINEAR_ADVANCE)); report_heading(forReplay, F(STR_LINEAR_ADVANCE));
#if EXTRUDERS < 2 #if DISTINCT_E < 2
report_echo_start(forReplay); report_echo_start(forReplay);
SERIAL_ECHOLNPGM(" M900 K", planner.extruder_advance_K[0]); SERIAL_ECHOLNPGM(" M900 K", planner.extruder_advance_K[0]);
#else #else

2
Marlin/src/inc/Conditionals_LCD.h
View File

@ -990,7 +990,7 @@
* with shared motion and temperature settings. * with shared motion and temperature settings.
* *
* DISTINCT_E is the number of distinguished extruders. By default this * DISTINCT_E is the number of distinguished extruders. By default this
* well be 1 which indicates all extruders share the same settings. * will be 1 which indicates all extruders share the same settings.
* *
* E_INDEX_N(E) should be used to get the E index of any item that might be * E_INDEX_N(E) should be used to get the E index of any item that might be
* distinguished. * distinguished.

15
Marlin/src/inc/SanityCheck.h
View File

@ -652,6 +652,8 @@
#error "USE_M73_REMAINING_TIME is now SET_REMAINING_TIME." #error "USE_M73_REMAINING_TIME is now SET_REMAINING_TIME."
#elif defined(SHOW_SD_PERCENT) #elif defined(SHOW_SD_PERCENT)
#error "SHOW_SD_PERCENT is now SHOW_PROGRESS_PERCENT." #error "SHOW_SD_PERCENT is now SHOW_PROGRESS_PERCENT."
#elif defined(EXTRA_LIN_ADVANCE_K)
#error "EXTRA_LIN_ADVANCE_K is now ADVANCE_K_EXTRA."
#endif #endif
// L64xx stepper drivers have been removed // L64xx stepper drivers have been removed
@ -1336,10 +1338,15 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Linear Advance 1.5 - Check K value range * Linear Advance 1.5 - Check K value range
*/ */
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static_assert( #if DISTINCT_E > 1
WITHIN(LIN_ADVANCE_K, 0, 10), constexpr float lak[] = ADVANCE_K;
"LIN_ADVANCE_K must be a value from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9)." static_assert(COUNT(lak) < DISTINCT_E, "The ADVANCE_K array has too many elements (i.e., more than " STRINGIFY(DISTINCT_E) ").");
); #define _LIN_ASSERT(N) static_assert(N >= COUNT(lak) || WITHIN(lak[N], 0, 10), "ADVANCE_K values must be from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9).");
REPEAT(DISTINCT_E, _LIN_ASSERT)
#undef _LIN_ASSERT
#else
static_assert(WITHIN(ADVANCE_K, 0, 10), "ADVANCE_K must be from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9).");
#endif
#if ENABLED(S_CURVE_ACCELERATION) && DISABLED(EXPERIMENTAL_SCURVE) #if ENABLED(S_CURVE_ACCELERATION) && DISABLED(EXPERIMENTAL_SCURVE)
#error "LIN_ADVANCE and S_CURVE_ACCELERATION may not play well together! Enable EXPERIMENTAL_SCURVE to continue." #error "LIN_ADVANCE and S_CURVE_ACCELERATION may not play well together! Enable EXPERIMENTAL_SCURVE to continue."
#elif ENABLED(DIRECT_STEPPING) #elif ENABLED(DIRECT_STEPPING)

2
Marlin/src/lcd/e3v2/jyersui/dwin.cpp
View File

@ -2772,7 +2772,7 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
case ADVANCED_LA: case ADVANCED_LA:
if (draw) { if (draw) {
Draw_Menu_Item(row, ICON_MaxAccelerated, F("Lin Advance Kp")); Draw_Menu_Item(row, ICON_MaxAccelerated, F("Lin Advance K"));
Draw_Float(planner.extruder_advance_K[0], row, false, 100); Draw_Float(planner.extruder_advance_K[0], row, false, 100);
} }
else else

4
Marlin/src/lcd/extui/ui_api.cpp
View File

@ -717,12 +717,12 @@ namespace ExtUI {
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
float getLinearAdvance_mm_mm_s(const extruder_t extruder) { float getLinearAdvance_mm_mm_s(const extruder_t extruder) {
return (extruder < EXTRUDERS) ? planner.extruder_advance_K[extruder - E0] : 0; return (extruder < EXTRUDERS) ? planner.extruder_advance_K[E_INDEX_N(extruder - E0)] : 0;
} }
void setLinearAdvance_mm_mm_s(const_float_t value, const extruder_t extruder) { void setLinearAdvance_mm_mm_s(const_float_t value, const extruder_t extruder) {
if (extruder < EXTRUDERS) if (extruder < EXTRUDERS)
planner.extruder_advance_K[extruder - E0] = constrain(value, 0, 10); planner.extruder_advance_K[E_INDEX_N(extruder - E0)] = constrain(value, 0, 10);
} }
#endif #endif

12
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -109,9 +109,9 @@ void menu_backlash();
BACK_ITEM(MSG_ADVANCED_SETTINGS); BACK_ITEM(MSG_ADVANCED_SETTINGS);
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
#if EXTRUDERS == 1 #if DISTINCT_E < 2
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10); EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
#elif HAS_MULTI_EXTRUDER #else
EXTRUDER_LOOP() EXTRUDER_LOOP()
EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10); EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
#endif #endif
@ -687,11 +687,11 @@ void menu_advanced_settings() {
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE) #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
SUBMENU(MSG_FILAMENT, menu_advanced_filament); SUBMENU(MSG_FILAMENT, menu_advanced_filament);
#elif ENABLED(LIN_ADVANCE) #elif ENABLED(LIN_ADVANCE)
#if EXTRUDERS == 1 #if DISTINCT_E < 2
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10); EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
#elif HAS_MULTI_EXTRUDER #else
LOOP_L_N(n, E_STEPPERS) EXTRUDER_LOOP()
EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 10); EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
#endif #endif
#endif #endif

4
Marlin/src/lcd/menu/menu_tune.cpp
View File

@ -210,9 +210,9 @@ void menu_tune() {
// Advance K: // Advance K:
// //
#if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS) #if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS)
#if EXTRUDERS == 1 #if DISTINCT_E < 2
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10); EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
#elif HAS_MULTI_EXTRUDER #else
EXTRUDER_LOOP() EXTRUDER_LOOP()
EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10); EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
#endif #endif

10
Marlin/src/module/planner.cpp
View File

@ -227,7 +227,7 @@ float Planner::previous_nominal_speed;
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
float Planner::extruder_advance_K[EXTRUDERS]; // Initialized by settings.load() float Planner::extruder_advance_K[DISTINCT_E]; // Initialized by settings.load()
#endif #endif
#if HAS_POSITION_FLOAT #if HAS_POSITION_FLOAT
@ -854,7 +854,7 @@ void Planner::calculate_trapezoid_for_block(block_t * const block, const_float_t
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
if (block->la_advance_rate) { if (block->la_advance_rate) {
const float comp = extruder_advance_K[block->extruder] * block->steps.e / block->step_event_count; const float comp = extruder_advance_K[E_INDEX_N(block->extruder)] * block->steps.e / block->step_event_count;
block->max_adv_steps = cruise_rate * comp; block->max_adv_steps = cruise_rate * comp;
block->final_adv_steps = final_rate * comp; block->final_adv_steps = final_rate * comp;
} }
@ -2541,7 +2541,7 @@ bool Planner::_populate_block(
* *
* de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves) * de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves)
*/ */
use_advance_lead = esteps && extruder_advance_K[extruder] && de > 0; use_advance_lead = esteps && extruder_advance_K[E_INDEX_N(extruder)] && de > 0;
if (use_advance_lead) { if (use_advance_lead) {
float e_D_ratio = (target_float.e - position_float.e) / float e_D_ratio = (target_float.e - position_float.e) /
@ -2557,7 +2557,7 @@ bool Planner::_populate_block(
use_advance_lead = false; use_advance_lead = false;
else { else {
// Scale E acceleration so that it will be possible to jump to the advance speed. // Scale E acceleration so that it will be possible to jump to the advance speed.
const uint32_t max_accel_steps_per_s2 = MAX_E_JERK(extruder) / (extruder_advance_K[extruder] * e_D_ratio) * steps_per_mm; const uint32_t max_accel_steps_per_s2 = MAX_E_JERK(extruder) / (extruder_advance_K[E_INDEX_N(extruder)] * e_D_ratio) * steps_per_mm;
if (TERN0(LA_DEBUG, accel > max_accel_steps_per_s2)) if (TERN0(LA_DEBUG, accel > max_accel_steps_per_s2))
SERIAL_ECHOLNPGM("Acceleration limited."); SERIAL_ECHOLNPGM("Acceleration limited.");
NOMORE(accel, max_accel_steps_per_s2); NOMORE(accel, max_accel_steps_per_s2);
@ -2594,7 +2594,7 @@ bool Planner::_populate_block(
if (use_advance_lead) { if (use_advance_lead) {
// the Bresenham algorithm will convert this step rate into extruder steps // the Bresenham algorithm will convert this step rate into extruder steps
block->la_advance_rate = extruder_advance_K[extruder] * block->acceleration_steps_per_s2; block->la_advance_rate = extruder_advance_K[E_INDEX_N(extruder)] * block->acceleration_steps_per_s2;
// reduce LA ISR frequency by calling it only often enough to ensure that there will // reduce LA ISR frequency by calling it only often enough to ensure that there will
// never be more than four extruder steps per call // never be more than four extruder steps per call

2
Marlin/src/module/planner.h
View File

@ -459,7 +459,7 @@ class Planner {
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static float extruder_advance_K[EXTRUDERS]; static float extruder_advance_K[DISTINCT_E];
#endif #endif
/** /**

19
Marlin/src/module/settings.cpp
View File

@ -118,8 +118,8 @@
#endif #endif
#endif #endif
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
extern float other_extruder_advance_K[EXTRUDERS]; extern float other_extruder_advance_K[DISTINCT_E];
#endif #endif
#if HAS_MULTI_EXTRUDER #if HAS_MULTI_EXTRUDER
@ -442,7 +442,7 @@ typedef struct SettingsDataStruct {
// //
// LIN_ADVANCE // LIN_ADVANCE
// //
float planner_extruder_advance_K[_MAX(EXTRUDERS, 1)]; // M900 K planner.extruder_advance_K float planner_extruder_advance_K[DISTINCT_E]; // M900 K planner.extruder_advance_K
// //
// HAS_MOTOR_CURRENT_PWM // HAS_MOTOR_CURRENT_PWM
@ -2334,7 +2334,7 @@ void MarlinSettings::postprocess() {
// Linear Advance // Linear Advance
// //
{ {
float extruder_advance_K[_MAX(EXTRUDERS, 1)]; float extruder_advance_K[DISTINCT_E];
_FIELD_TEST(planner_extruder_advance_K); _FIELD_TEST(planner_extruder_advance_K);
EEPROM_READ(extruder_advance_K); EEPROM_READ(extruder_advance_K);
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
@ -3206,12 +3206,17 @@ void MarlinSettings::reset() {
// //
// Linear Advance // Linear Advance
// //
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
#if ENABLED(DISTINCT_E_FACTORS)
constexpr float linAdvanceK[] = ADVANCE_K;
EXTRUDER_LOOP() { EXTRUDER_LOOP() {
planner.extruder_advance_K[e] = LIN_ADVANCE_K; const float a = linAdvanceK[_MAX(e, COUNT(linAdvanceK) - 1)];
TERN_(EXTRA_LIN_ADVANCE_K, other_extruder_advance_K[e] = LIN_ADVANCE_K); planner.extruder_advance_K[e] = a;
TERN_(ADVANCE_K_EXTRA, other_extruder_advance_K[e] = a);
} }
#else
planner.extruder_advance_K[0] = ADVANCE_K;
#endif
#endif #endif
// //

2
buildroot/tests/mega2560
View File

@ -30,7 +30,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \ REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \ SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \ EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \ MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE ADVANCE_K_EXTRA QUICK_HOME \
SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \ SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
ENCODER_NOISE_FILTER BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL ENCODER_NOISE_FILTER BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3" exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"

4
buildroot/tests/rambo
View File

@ -34,7 +34,7 @@ opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_P
FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \ FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
PSU_CONTROL PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \ PSU_CONTROL PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \
POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \ POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \ SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE ADVANCE_K_EXTRA \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
opt_add DEBUG_POWER_LOSS_RECOVERY opt_add DEBUG_POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3" exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
@ -93,7 +93,7 @@ opt_set MOTHERBOARD BOARD_MINIRAMBO \
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \ SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \
AUTO_BED_LEVELING_LINEAR PROBE_MANUALLY LCD_BED_LEVELING \ AUTO_BED_LEVELING_LINEAR PROBE_MANUALLY LCD_BED_LEVELING \
LIN_ADVANCE EXTRA_LIN_ADVANCE_K \ LIN_ADVANCE ADVANCE_K_EXTRA \
INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS M100_FREE_MEMORY_WATCHER \ INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS M100_FREE_MEMORY_WATCHER \
NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \ NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \ ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \