ADVANCE_K per-extruder (#24821)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Giuliano Zaro 2022-10-10 20:49:37 +02:00 committed by Scott Lahteine
parent 8481264566
commit 0203e32c73
13 changed files with 68 additions and 52 deletions

View File

@ -2061,8 +2061,12 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#else
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. //#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.

View File

@ -27,8 +27,8 @@
#include "../../gcode.h" #include "../../gcode.h"
#include "../../../module/planner.h" #include "../../../module/planner.h"
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
float other_extruder_advance_K[EXTRUDERS]; float other_extruder_advance_K[DISTINCT_E];
uint8_t lin_adv_slot = 0; uint8_t lin_adv_slot = 0;
#endif #endif
@ -36,8 +36,8 @@
* M900: Get or Set Linear Advance K-factor * M900: Get or Set Linear Advance K-factor
* T<tool> Which tool to address * T<tool> Which tool to address
* K<factor> Set current advance K factor (Slot 0). * K<factor> Set current advance K factor (Slot 0).
* L<factor> Set secondary advance K factor (Slot 1). Requires EXTRA_LIN_ADVANCE_K. * L<factor> Set secondary advance K factor (Slot 1). Requires ADVANCE_K_EXTRA.
* S<0/1> Activate slot 0 or 1. Requires EXTRA_LIN_ADVANCE_K. * S<0/1> Activate slot 0 or 1. Requires ADVANCE_K_EXTRA.
*/ */
void GcodeSuite::M900() { void GcodeSuite::M900() {
@ -58,12 +58,12 @@ void GcodeSuite::M900() {
} }
#endif #endif
float &kref = planner.extruder_advance_K[tool_index], newK = kref; float &kref = planner.extruder_advance_K[E_INDEX_N(tool_index)], newK = kref;
const float oldK = newK; const float oldK = newK;
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
float &lref = other_extruder_advance_K[tool_index]; float &lref = other_extruder_advance_K[E_INDEX_N(tool_index)];
const bool old_slot = TEST(lin_adv_slot, tool_index), // The tool's current slot (0 or 1) const bool old_slot = TEST(lin_adv_slot, tool_index), // The tool's current slot (0 or 1)
new_slot = parser.boolval('S', old_slot); // The passed slot (default = current) new_slot = parser.boolval('S', old_slot); // The passed slot (default = current)
@ -111,9 +111,9 @@ void GcodeSuite::M900() {
if (!parser.seen_any()) { if (!parser.seen_any()) {
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
#if EXTRUDERS < 2 #if DISTINCT_E < 2
SERIAL_ECHOLNPGM("Advance S", new_slot, " K", kref, "(S", !new_slot, " K", lref, ")"); SERIAL_ECHOLNPGM("Advance S", new_slot, " K", kref, "(S", !new_slot, " K", lref, ")");
#else #else
EXTRUDER_LOOP() { EXTRUDER_LOOP() {
@ -127,7 +127,7 @@ void GcodeSuite::M900() {
#else #else
SERIAL_ECHO_START(); SERIAL_ECHO_START();
#if EXTRUDERS < 2 #if DISTINCT_E < 2
SERIAL_ECHOLNPGM("Advance K=", planner.extruder_advance_K[0]); SERIAL_ECHOLNPGM("Advance K=", planner.extruder_advance_K[0]);
#else #else
SERIAL_ECHOPGM("Advance K"); SERIAL_ECHOPGM("Advance K");
@ -145,7 +145,7 @@ void GcodeSuite::M900() {
void GcodeSuite::M900_report(const bool forReplay/*=true*/) { void GcodeSuite::M900_report(const bool forReplay/*=true*/) {
report_heading(forReplay, F(STR_LINEAR_ADVANCE)); report_heading(forReplay, F(STR_LINEAR_ADVANCE));
#if EXTRUDERS < 2 #if DISTINCT_E < 2
report_echo_start(forReplay); report_echo_start(forReplay);
SERIAL_ECHOLNPGM(" M900 K", planner.extruder_advance_K[0]); SERIAL_ECHOLNPGM(" M900 K", planner.extruder_advance_K[0]);
#else #else

View File

@ -990,7 +990,7 @@
* with shared motion and temperature settings. * with shared motion and temperature settings.
* *
* DISTINCT_E is the number of distinguished extruders. By default this * DISTINCT_E is the number of distinguished extruders. By default this
* well be 1 which indicates all extruders share the same settings. * will be 1 which indicates all extruders share the same settings.
* *
* E_INDEX_N(E) should be used to get the E index of any item that might be * E_INDEX_N(E) should be used to get the E index of any item that might be
* distinguished. * distinguished.

View File

@ -652,6 +652,8 @@
#error "USE_M73_REMAINING_TIME is now SET_REMAINING_TIME." #error "USE_M73_REMAINING_TIME is now SET_REMAINING_TIME."
#elif defined(SHOW_SD_PERCENT) #elif defined(SHOW_SD_PERCENT)
#error "SHOW_SD_PERCENT is now SHOW_PROGRESS_PERCENT." #error "SHOW_SD_PERCENT is now SHOW_PROGRESS_PERCENT."
#elif defined(EXTRA_LIN_ADVANCE_K)
#error "EXTRA_LIN_ADVANCE_K is now ADVANCE_K_EXTRA."
#endif #endif
// L64xx stepper drivers have been removed // L64xx stepper drivers have been removed
@ -1336,10 +1338,15 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Linear Advance 1.5 - Check K value range * Linear Advance 1.5 - Check K value range
*/ */
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static_assert( #if DISTINCT_E > 1
WITHIN(LIN_ADVANCE_K, 0, 10), constexpr float lak[] = ADVANCE_K;
"LIN_ADVANCE_K must be a value from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9)." static_assert(COUNT(lak) < DISTINCT_E, "The ADVANCE_K array has too many elements (i.e., more than " STRINGIFY(DISTINCT_E) ").");
); #define _LIN_ASSERT(N) static_assert(N >= COUNT(lak) || WITHIN(lak[N], 0, 10), "ADVANCE_K values must be from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9).");
REPEAT(DISTINCT_E, _LIN_ASSERT)
#undef _LIN_ASSERT
#else
static_assert(WITHIN(ADVANCE_K, 0, 10), "ADVANCE_K must be from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9).");
#endif
#if ENABLED(S_CURVE_ACCELERATION) && DISABLED(EXPERIMENTAL_SCURVE) #if ENABLED(S_CURVE_ACCELERATION) && DISABLED(EXPERIMENTAL_SCURVE)
#error "LIN_ADVANCE and S_CURVE_ACCELERATION may not play well together! Enable EXPERIMENTAL_SCURVE to continue." #error "LIN_ADVANCE and S_CURVE_ACCELERATION may not play well together! Enable EXPERIMENTAL_SCURVE to continue."
#elif ENABLED(DIRECT_STEPPING) #elif ENABLED(DIRECT_STEPPING)

View File

@ -2772,7 +2772,7 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
case ADVANCED_LA: case ADVANCED_LA:
if (draw) { if (draw) {
Draw_Menu_Item(row, ICON_MaxAccelerated, F("Lin Advance Kp")); Draw_Menu_Item(row, ICON_MaxAccelerated, F("Lin Advance K"));
Draw_Float(planner.extruder_advance_K[0], row, false, 100); Draw_Float(planner.extruder_advance_K[0], row, false, 100);
} }
else else

View File

@ -717,12 +717,12 @@ namespace ExtUI {
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
float getLinearAdvance_mm_mm_s(const extruder_t extruder) { float getLinearAdvance_mm_mm_s(const extruder_t extruder) {
return (extruder < EXTRUDERS) ? planner.extruder_advance_K[extruder - E0] : 0; return (extruder < EXTRUDERS) ? planner.extruder_advance_K[E_INDEX_N(extruder - E0)] : 0;
} }
void setLinearAdvance_mm_mm_s(const_float_t value, const extruder_t extruder) { void setLinearAdvance_mm_mm_s(const_float_t value, const extruder_t extruder) {
if (extruder < EXTRUDERS) if (extruder < EXTRUDERS)
planner.extruder_advance_K[extruder - E0] = constrain(value, 0, 10); planner.extruder_advance_K[E_INDEX_N(extruder - E0)] = constrain(value, 0, 10);
} }
#endif #endif

View File

@ -109,9 +109,9 @@ void menu_backlash();
BACK_ITEM(MSG_ADVANCED_SETTINGS); BACK_ITEM(MSG_ADVANCED_SETTINGS);
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
#if EXTRUDERS == 1 #if DISTINCT_E < 2
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10); EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
#elif HAS_MULTI_EXTRUDER #else
EXTRUDER_LOOP() EXTRUDER_LOOP()
EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10); EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
#endif #endif
@ -687,11 +687,11 @@ void menu_advanced_settings() {
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE) #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
SUBMENU(MSG_FILAMENT, menu_advanced_filament); SUBMENU(MSG_FILAMENT, menu_advanced_filament);
#elif ENABLED(LIN_ADVANCE) #elif ENABLED(LIN_ADVANCE)
#if EXTRUDERS == 1 #if DISTINCT_E < 2
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10); EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
#elif HAS_MULTI_EXTRUDER #else
LOOP_L_N(n, E_STEPPERS) EXTRUDER_LOOP()
EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 10); EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
#endif #endif
#endif #endif

View File

@ -210,9 +210,9 @@ void menu_tune() {
// Advance K: // Advance K:
// //
#if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS) #if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS)
#if EXTRUDERS == 1 #if DISTINCT_E < 2
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10); EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
#elif HAS_MULTI_EXTRUDER #else
EXTRUDER_LOOP() EXTRUDER_LOOP()
EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10); EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
#endif #endif

View File

@ -227,7 +227,7 @@ float Planner::previous_nominal_speed;
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
float Planner::extruder_advance_K[EXTRUDERS]; // Initialized by settings.load() float Planner::extruder_advance_K[DISTINCT_E]; // Initialized by settings.load()
#endif #endif
#if HAS_POSITION_FLOAT #if HAS_POSITION_FLOAT
@ -854,7 +854,7 @@ void Planner::calculate_trapezoid_for_block(block_t * const block, const_float_t
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
if (block->la_advance_rate) { if (block->la_advance_rate) {
const float comp = extruder_advance_K[block->extruder] * block->steps.e / block->step_event_count; const float comp = extruder_advance_K[E_INDEX_N(block->extruder)] * block->steps.e / block->step_event_count;
block->max_adv_steps = cruise_rate * comp; block->max_adv_steps = cruise_rate * comp;
block->final_adv_steps = final_rate * comp; block->final_adv_steps = final_rate * comp;
} }
@ -2541,7 +2541,7 @@ bool Planner::_populate_block(
* *
* de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves) * de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves)
*/ */
use_advance_lead = esteps && extruder_advance_K[extruder] && de > 0; use_advance_lead = esteps && extruder_advance_K[E_INDEX_N(extruder)] && de > 0;
if (use_advance_lead) { if (use_advance_lead) {
float e_D_ratio = (target_float.e - position_float.e) / float e_D_ratio = (target_float.e - position_float.e) /
@ -2557,7 +2557,7 @@ bool Planner::_populate_block(
use_advance_lead = false; use_advance_lead = false;
else { else {
// Scale E acceleration so that it will be possible to jump to the advance speed. // Scale E acceleration so that it will be possible to jump to the advance speed.
const uint32_t max_accel_steps_per_s2 = MAX_E_JERK(extruder) / (extruder_advance_K[extruder] * e_D_ratio) * steps_per_mm; const uint32_t max_accel_steps_per_s2 = MAX_E_JERK(extruder) / (extruder_advance_K[E_INDEX_N(extruder)] * e_D_ratio) * steps_per_mm;
if (TERN0(LA_DEBUG, accel > max_accel_steps_per_s2)) if (TERN0(LA_DEBUG, accel > max_accel_steps_per_s2))
SERIAL_ECHOLNPGM("Acceleration limited."); SERIAL_ECHOLNPGM("Acceleration limited.");
NOMORE(accel, max_accel_steps_per_s2); NOMORE(accel, max_accel_steps_per_s2);
@ -2594,7 +2594,7 @@ bool Planner::_populate_block(
if (use_advance_lead) { if (use_advance_lead) {
// the Bresenham algorithm will convert this step rate into extruder steps // the Bresenham algorithm will convert this step rate into extruder steps
block->la_advance_rate = extruder_advance_K[extruder] * block->acceleration_steps_per_s2; block->la_advance_rate = extruder_advance_K[E_INDEX_N(extruder)] * block->acceleration_steps_per_s2;
// reduce LA ISR frequency by calling it only often enough to ensure that there will // reduce LA ISR frequency by calling it only often enough to ensure that there will
// never be more than four extruder steps per call // never be more than four extruder steps per call

View File

@ -459,7 +459,7 @@ class Planner {
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static float extruder_advance_K[EXTRUDERS]; static float extruder_advance_K[DISTINCT_E];
#endif #endif
/** /**

View File

@ -118,8 +118,8 @@
#endif #endif
#endif #endif
#if ENABLED(EXTRA_LIN_ADVANCE_K) #if ENABLED(ADVANCE_K_EXTRA)
extern float other_extruder_advance_K[EXTRUDERS]; extern float other_extruder_advance_K[DISTINCT_E];
#endif #endif
#if HAS_MULTI_EXTRUDER #if HAS_MULTI_EXTRUDER
@ -442,7 +442,7 @@ typedef struct SettingsDataStruct {
// //
// LIN_ADVANCE // LIN_ADVANCE
// //
float planner_extruder_advance_K[_MAX(EXTRUDERS, 1)]; // M900 K planner.extruder_advance_K float planner_extruder_advance_K[DISTINCT_E]; // M900 K planner.extruder_advance_K
// //
// HAS_MOTOR_CURRENT_PWM // HAS_MOTOR_CURRENT_PWM
@ -2334,7 +2334,7 @@ void MarlinSettings::postprocess() {
// Linear Advance // Linear Advance
// //
{ {
float extruder_advance_K[_MAX(EXTRUDERS, 1)]; float extruder_advance_K[DISTINCT_E];
_FIELD_TEST(planner_extruder_advance_K); _FIELD_TEST(planner_extruder_advance_K);
EEPROM_READ(extruder_advance_K); EEPROM_READ(extruder_advance_K);
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
@ -3206,12 +3206,17 @@ void MarlinSettings::reset() {
// //
// Linear Advance // Linear Advance
// //
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
#if ENABLED(DISTINCT_E_FACTORS)
constexpr float linAdvanceK[] = ADVANCE_K;
EXTRUDER_LOOP() { EXTRUDER_LOOP() {
planner.extruder_advance_K[e] = LIN_ADVANCE_K; const float a = linAdvanceK[_MAX(e, COUNT(linAdvanceK) - 1)];
TERN_(EXTRA_LIN_ADVANCE_K, other_extruder_advance_K[e] = LIN_ADVANCE_K); planner.extruder_advance_K[e] = a;
TERN_(ADVANCE_K_EXTRA, other_extruder_advance_K[e] = a);
} }
#else
planner.extruder_advance_K[0] = ADVANCE_K;
#endif
#endif #endif
// //

View File

@ -30,7 +30,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \ REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \ SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \ EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \ MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE ADVANCE_K_EXTRA QUICK_HOME \
SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \ SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
ENCODER_NOISE_FILTER BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL ENCODER_NOISE_FILTER BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3" exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"

View File

@ -34,7 +34,7 @@ opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_P
FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \ FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
PSU_CONTROL PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \ PSU_CONTROL PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \
POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \ POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \ SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE ADVANCE_K_EXTRA \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
opt_add DEBUG_POWER_LOSS_RECOVERY opt_add DEBUG_POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3" exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
@ -93,7 +93,7 @@ opt_set MOTHERBOARD BOARD_MINIRAMBO \
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \ SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \
AUTO_BED_LEVELING_LINEAR PROBE_MANUALLY LCD_BED_LEVELING \ AUTO_BED_LEVELING_LINEAR PROBE_MANUALLY LCD_BED_LEVELING \
LIN_ADVANCE EXTRA_LIN_ADVANCE_K \ LIN_ADVANCE ADVANCE_K_EXTRA \
INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS M100_FREE_MEMORY_WATCHER \ INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS M100_FREE_MEMORY_WATCHER \
NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \ NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \ ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \