bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ ADVANCE_K per-extruder (#24821)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Giuliano Zaro
2022-10-10 20:49:37 +02:00
committed by Scott Lahteine
parent 8481264566
commit 0203e32c73
13 changed files with 68 additions and 52 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/src/module/planner.cpp
View File

@ -227,7 +227,7 @@ float Planner::previous_nominal_speed;
#endif
#if ENABLED(LIN_ADVANCE)
float Planner::extruder_advance_K[EXTRUDERS]; // Initialized by settings.load()
float Planner::extruder_advance_K[DISTINCT_E]; // Initialized by settings.load()
#endif
#if HAS_POSITION_FLOAT
@ -854,7 +854,7 @@ void Planner::calculate_trapezoid_for_block(block_t * const block, const_float_t
#if ENABLED(LIN_ADVANCE)
if (block->la_advance_rate) {
const float comp = extruder_advance_K[block->extruder] * block->steps.e / block->step_event_count;
const float comp = extruder_advance_K[E_INDEX_N(block->extruder)] * block->steps.e / block->step_event_count;
block->max_adv_steps = cruise_rate * comp;
block->final_adv_steps = final_rate * comp;
}
@ -2541,7 +2541,7 @@ bool Planner::_populate_block(
*
* de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves)
*/
use_advance_lead = esteps && extruder_advance_K[extruder] && de > 0;
use_advance_lead = esteps && extruder_advance_K[E_INDEX_N(extruder)] && de > 0;
if (use_advance_lead) {
float e_D_ratio = (target_float.e - position_float.e) /
@ -2557,7 +2557,7 @@ bool Planner::_populate_block(
use_advance_lead = false;
else {
// Scale E acceleration so that it will be possible to jump to the advance speed.
const uint32_t max_accel_steps_per_s2 = MAX_E_JERK(extruder) / (extruder_advance_K[extruder] * e_D_ratio) * steps_per_mm;
const uint32_t max_accel_steps_per_s2 = MAX_E_JERK(extruder) / (extruder_advance_K[E_INDEX_N(extruder)] * e_D_ratio) * steps_per_mm;
if (TERN0(LA_DEBUG, accel > max_accel_steps_per_s2))
SERIAL_ECHOLNPGM("Acceleration limited.");
NOMORE(accel, max_accel_steps_per_s2);
@ -2594,7 +2594,7 @@ bool Planner::_populate_block(
if (use_advance_lead) {
// the Bresenham algorithm will convert this step rate into extruder steps
block->la_advance_rate = extruder_advance_K[extruder] * block->acceleration_steps_per_s2;
block->la_advance_rate = extruder_advance_K[E_INDEX_N(extruder)] * block->acceleration_steps_per_s2;
// reduce LA ISR frequency by calling it only often enough to ensure that there will
// never be more than four extruder steps per call