📝 Add Configurations section to README (#21955)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Roger D. Winans 2021-05-22 00:14:25 -04:00 committed by GitHub
parent f1f622de01
commit 003cb20b9f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -16,6 +16,10 @@ Marlin 2.0 takes this popular RepRap firmware to the next level by adding suppor
Download earlier versions of Marlin on the [Releases page](https://github.com/MarlinFirmware/Marlin/releases). Download earlier versions of Marlin on the [Releases page](https://github.com/MarlinFirmware/Marlin/releases).
## Example Configurations
Before building Marlin you'll need to configure it for your specific hardware. Your vendor should have already provided source code with configurations for the installed firmware, but if you ever decide to upgrade you'll need updated configuration files. Marlin users have contributed dozens of tested example configurations to get you started. Visit the [MarlinFirmware/Configurations](https://github.com/MarlinFirmware/Configurations) repository to find the right configuration for your hardware.
## Building Marlin 2.0 ## Building Marlin 2.0
To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). Detailed build and install instructions are posted at: To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). Detailed build and install instructions are posted at: