Ensure language.h include order

See #17604

Marlin/Configuration_adv.h

@@ -936,7 +936,7 @@
 
   // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
   // These correspond to the physical drivers, so be mindful if the order is changed.
-  #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
+  #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
 
   //#define DIGIPOT_USE_RAW_VALUES    // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents)
 
@@ -2358,7 +2358,7 @@
    * phase position. Trinamic drivers use a stepper phase table with 1024 values
    * spanning 4 full steps with 256 positions each (ergo, 1024 positions).
    * Full step positions (128, 384, 640, 896) have the highest holding torque.
-   *  
+   *
    * Values from 0..1023, -1 to disable homing phase for that axis.
    */
    //#define TMC_HOME_PHASE { 896, 896, 896 }

Marlin/src/core/language.h

@@ -81,11 +81,9 @@
 #ifdef CUSTOM_MACHINE_NAME
   #undef  MACHINE_NAME
   #define MACHINE_NAME CUSTOM_MACHINE_NAME
-#else
+#elif defined(DEFAULT_MACHINE_NAME)
-  #ifdef DEFAULT_MACHINE_NAME
+  #undef  MACHINE_NAME
-    #undef  MACHINE_NAME
+  #define MACHINE_NAME DEFAULT_MACHINE_NAME
-    #define MACHINE_NAME DEFAULT_MACHINE_NAME
-  #endif
 #endif
 
 #ifndef MACHINE_UUID

Marlin/src/core/serial.cpp

@@ -21,7 +21,7 @@
  */
 
 #include "serial.h"
-#include "language.h"
+#include "../inc/MarlinConfig.h"
 
 uint8_t marlin_debug_flags = MARLIN_DEBUG_NONE;
 

Marlin/src/feature/pause.cpp

@@ -53,7 +53,6 @@
   #include "../lcd/extui/ui_api.h"
 #endif
 
-#include "../core/language.h"
 #include "../lcd/ultralcd.h"
 
 #if HAS_BUZZER

Marlin/src/gcode/feature/pause/G60.cpp

@@ -24,7 +24,6 @@
 
 #if SAVED_POSITIONS
 
-#include "../../../core/language.h"
 #include "../../gcode.h"
 #include "../../../module/motion.h"
 

Marlin/src/gcode/feature/pause/G61.cpp

@@ -24,7 +24,6 @@
 
 #if SAVED_POSITIONS
 
-#include "../../../core/language.h"
 #include "../../../module/planner.h"
 #include "../../gcode.h"
 #include "../../../module/motion.h"

Marlin/src/lcd/lcdprint.cpp

@@ -28,8 +28,8 @@
 
 #if HAS_SPI_LCD
 
+#include "../inc/MarlinConfig.h"
 #include "lcdprint.h"
-#include "../core/language.h"
 
 /**
  * lcd_put_u8str_ind_P

Marlin/src/module/configuration_store.cpp

@@ -51,7 +51,6 @@
 #include "stepper.h"
 #include "temperature.h"
 #include "../lcd/ultralcd.h"
-#include "../core/language.h"
 #include "../libs/vector_3.h"   // for matrix_3x3
 #include "../gcode/gcode.h"
 #include "../MarlinCore.h"

Marlin/src/module/planner.cpp

@@ -67,7 +67,6 @@
 #include "motion.h"
 #include "temperature.h"
 #include "../lcd/ultralcd.h"
-#include "../core/language.h"
 #include "../gcode/parser.h"
 
 #include "../MarlinCore.h"

Marlin/src/module/planner_bezier.cpp

@@ -36,7 +36,6 @@
 #include "temperature.h"
 
 #include "../MarlinCore.h"
-#include "../core/language.h"
 #include "../gcode/queue.h"
 
 // See the meaning in the documentation of cubic_b_spline().

Marlin/src/module/stepper.cpp

@@ -97,7 +97,6 @@ Stepper stepper; // Singleton
 
 #include "temperature.h"
 #include "../lcd/ultralcd.h"
-#include "../core/language.h"
 #include "../gcode/queue.h"
 #include "../sd/cardreader.h"
 #include "../MarlinCore.h"

Marlin/src/module/temperature.cpp

@@ -30,7 +30,6 @@
 #include "../MarlinCore.h"
 #include "../lcd/ultralcd.h"
 #include "planner.h"
-#include "../core/language.h"
 #include "../HAL/shared/Delay.h"
 #if ENABLED(EXTENSIBLE_UI)
   #include "../lcd/extui/ui_api.h"

Marlin/src/sd/cardreader.cpp

@@ -30,7 +30,6 @@
 #include "../lcd/ultralcd.h"
 #include "../module/planner.h"        // for synchronize
 #include "../module/printcounter.h"
-#include "../core/language.h"
 #include "../gcode/queue.h"
 #include "../module/configuration_store.h"