Marlin_Firmware/Marlin/language_kana_utf8.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Japanese (Kana UTF8 version)
 *
 * LCD Menu Messages
 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
 *
 */

#ifndef LANGUAGE_KANA_UTF_H
#define LANGUAGE_KANA_UTF_H

#define MAPPER_E382E383
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_KANA

// This just to show the potential benefit of unicode.
// This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF.

// 片仮名表示定義
#define WELCOME_MSG                         MACHINE_NAME " ready."
#define MSG_SD_INSERTED                     "カード ソウニュウサレマシタ"        // "Card inserted"
#define MSG_SD_REMOVED                      "カードガアリマセン"               // "Card removed"
#define MSG_LCD_ENDSTOPS                    "エンドストップ"                  // "Endstops" // Max length 8 characters
#define MSG_MAIN                            "メイン"                       // "Main"
#define MSG_AUTOSTART                       "ジドウカイシ"                   // "Autostart"
#define MSG_DISABLE_STEPPERS                "モーターデンゲン オフ"            // "Disable steppers"
#define MSG_AUTO_HOME                       "ゲンテンニイドウ"                // "Auto home"
#define MSG_LEVEL_BED_HOMING                "ゲンテンニイドウ"                // "Homing XYZ"
#define MSG_LEVEL_BED_WAITING               "レベリングカイシ"                // "Click to Begin"
#define MSG_LEVEL_BED_DONE                  "レベリングカンリョウ"              // "Leveling Done!"
#define MSG_LEVEL_BED_CANCEL                "トリヤメ"                      // "Cancel"
#define MSG_SET_HOME_OFFSETS                "キジュンオフセットセッテイ"         // "Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED            "オフセット テキヨウサレマシタ"       // "Offsets applied"
#define MSG_SET_ORIGIN                      "キジュンセット"                 // "Set origin"
#define MSG_PREHEAT_PLA                     "PLA ヨネツ"                   // "Preheat PLA"
#define MSG_PREHEAT_PLA_N                   MSG_PREHEAT_PLA " "
#define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " スベテ"     // " All"
#define MSG_PREHEAT_PLA_BEDONLY             MSG_PREHEAT_PLA " ベッド"     // " Bed"
#define MSG_PREHEAT_PLA_SETTINGS            MSG_PREHEAT_PLA " セッテイ"    // " conf"
#define MSG_PREHEAT_ABS                     "ABS ヨネツ"                  // "Preheat ABS"
#define MSG_PREHEAT_ABS_N                   MSG_PREHEAT_ABS " "
#define MSG_PREHEAT_ABS_ALL                 MSG_PREHEAT_ABS " スベテ"     // " All"
#define MSG_PREHEAT_ABS_BEDONLY             MSG_PREHEAT_ABS " ベッド"     // " Bed"
#define MSG_PREHEAT_ABS_SETTINGS            MSG_PREHEAT_ABS " セッテイ"    // " conf"
#define MSG_COOLDOWN                        "カネツテイシ"                  // "Cooldown"
#define MSG_SWITCH_PS_ON                    "デンゲン オン"                 // "Switch power on"
#define MSG_SWITCH_PS_OFF                   "デンゲン オフ"                 // "Switch power off"
#define MSG_EXTRUDE                         "オシダシ"                     // "Extrude"
#define MSG_RETRACT                         "ヒキコミセッテイ"                // "Retract"
#define MSG_MOVE_AXIS                       "ジクイドウ"                    // "Move axis"
#define MSG_LEVEL_BED                       "ベッドレベリング"                // "Level bed"
#define MSG_MOVE_X                          "Xジク イドウ"                  // "Move X"
#define MSG_MOVE_Y                          "Yジク イドウ"                  // "Move Y"
#define MSG_MOVE_Z                          "Zジク イドウ"                  // "Move Z"
#define MSG_MOVE_E                          "エクストルーダー"                // "Extruder"
#define MSG_MOVE_01MM                       "0.1mm イドウ"                 // "Move 0.1mm"
#define MSG_MOVE_1MM                        "  1mm イドウ"                 // "Move 1mm"
#define MSG_MOVE_10MM                       " 10mm イドウ"                 // "Move 10mm"
#define MSG_SPEED                           "スピード"                     // "Speed"
#define MSG_BED_Z                           "Zオフセット"                   // "Bed Z"
#define MSG_NOZZLE                          "ノズル"                       // "Nozzle"
#define MSG_BED                             "ベッド"                       // "Bed"
#define MSG_FAN_SPEED                       "ファンソクド"                    // "Fan speed"
#define MSG_FLOW                            "オクリリョウ"                     // "Flow"
#define MSG_CONTROL                         "コントロール"                    // "Control"
#define MSG_MIN                             LCD_STR_THERMOMETER " サイテイ" // " Min"
#define MSG_MAX                             LCD_STR_THERMOMETER " サイコウ" // " Max"
#define MSG_FACTOR                          LCD_STR_THERMOMETER " ファクター" // " Fact"
#define MSG_AUTOTEMP                        "ジドウオンド"                    // "Autotemp"
#define MSG_ON                              "オン "                         // "On "
#define MSG_OFF                             "オフ "                         // "Off"
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_PID_C                           "PID-C"
#define MSG_ACC                             "カソクド mm/s2"               // "Accel"
#define MSG_VXY_JERK                        "XYジク ヤクド mm/s"            // "Vxy-jerk"
#define MSG_VZ_JERK                         "Zジク ヤクド mm/s"             // "Vz-jerk"
#define MSG_VE_JERK                         "エクストルーダー ヤクド"          // "Ve-jerk"
#define MSG_VMAX                            "サイダイフィードレート "           // "Vmax "
#define MSG_X                               "X"                         // "x"
#define MSG_Y                               "Y"                         // "y"
#define MSG_Z                               "Z"                         // "z"
#define MSG_E                               "E"                         // "e"
#define MSG_VMIN                            "サイショウフィードレート"          // "Vmin"
#define MSG_VTRAV_MIN                       "サイショウトラベルレート"          // "VTrav min"
#define MSG_AMAX                            "サイダイカソクド "              // "Amax "
#define MSG_A_RETRACT                       "ヒキコミカソクド"               // "A-retract"
#define MSG_A_TRAVEL                        "トラベルカソクド"               // "A-travel"
#define MSG_XSTEPS                          "Xsteps/mm"
#define MSG_YSTEPS                          "Ysteps/mm"
#define MSG_ZSTEPS                          "Zsteps/mm"
#define MSG_ESTEPS                          "Esteps/mm"
#define MSG_TEMPERATURE                     "オンド"                      // "Temperature"
#define MSG_MOTION                          "ウゴキセッテイ"                // "Motion"
#define MSG_VOLUMETRIC                      "フィラメント"                   // "Filament"
#define MSG_VOLUMETRIC_ENABLED              "E in mm3"
#define MSG_FILAMENT_DIAM                   "フィラメントチョッケイ"            // "Fil. Dia."
#define MSG_CONTRAST                        "LCDコントラスト"               // "LCD contrast"
#define MSG_STORE_EPROM                     "メモリヘカクノウ"               // "Store memory"
#define MSG_LOAD_EPROM                      "メモリカラヨミコミ"               // "Load memory"
#define MSG_RESTORE_FAILSAFE                "セッテイリセット"               // "Restore failsafe"
#define MSG_REFRESH                         "リフレッシュ"                  // "Refresh"
#define MSG_WATCH                           "インフォ"                     // "Info screen"
#define MSG_PREPARE                         "ジュンビセッテイ"               // "Prepare"
#define MSG_TUNE                            "チョウセイ"                    // "Tune"
#define MSG_PAUSE_PRINT                     "イチジテイシ"                  // "Pause print"
#define MSG_RESUME_PRINT                    "プリントサイカイ"                // "Resume print"
#define MSG_STOP_PRINT                      "プリントテイシ"                 // "Stop print"
#define MSG_CARD_MENU                       "SDカードカラプリント"            // "Print from SD"
#define MSG_NO_CARD                         "SDカードガアリマセン"            // "No SD card"
#define MSG_DWELL                           "スリープ"                     // "Sleep..."
#define MSG_USERWAIT                        "シバラクオマチクダサイ"           // "Wait for user..."
#define MSG_RESUMING                        "プリントサイカイ"                // "Resuming print"
#define MSG_PRINT_ABORTED                   "プリントチュウシサレマシタ"          // "Print aborted"
#define MSG_NO_MOVE                         "ウゴキマセン"                  // "No move."
#define MSG_KILLED                          "ヒジョウテイシ"                  // "KILLED. "
#define MSG_STOPPED                         "テイシシマシタ"                  // "STOPPED. "
#define MSG_CONTROL_RETRACT                 "ヒキコミリョウ mm"                // "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP            "ヒキコミリョウS mm"               // "Swap Re.mm"
#define MSG_CONTROL_RETRACTF                "ヒキコミレート mm/s"             // "Retract  V"
#define MSG_CONTROL_RETRACT_ZLIFT           "ノズルタイヒ mm"                // "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER         "リカバー +mm"                 // "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "リカバーS +mm"                // "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "リカバーレート mm/s"            // "UnRet  V"
#define MSG_AUTORETRACT                     "ジドウヒキコミ"                 // "AutoRetr."
#define MSG_FILAMENTCHANGE                  "フィラメントコウカン"              // "Change filament"
#define MSG_INIT_SDCARD                     "SDカードサイヨミコミ"             // "Init. SD card"
#define MSG_CNG_SDCARD                      "SDカードコウカン"               // "Change SD card"
#define MSG_ZPROBE_OUT                      "Zプローブ ベッドガイ"            // "Z probe out. bed"
#define MSG_YX_UNHOMED                      "ゲンテンハXYイドウゴZ"           // "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET                  "Zオフセット"                   // "Z Offset"
#define MSG_BABYSTEP_X                      "Xジク ビドウ"                  // "Babystep X"
#define MSG_BABYSTEP_Y                      "Yジク ビドウ"                  // "Babystep Y"
#define MSG_BABYSTEP_Z                      "Zジク ビドウ"                  // "Babystep Z"
#define MSG_ENDSTOP_ABORT                   "エンドストップ サドウ"            // "Endstop abort"
#define MSG_HEATING_FAILED_LCD              "カネツシッパイ"                 // "Heating failed"
#define MSG_ERR_REDUNDANT_TEMP              "エラー:ジョウチョウサーミスターキノウ"  // "Err: REDUNDANT TEMP"
#define MSG_THERMAL_RUNAWAY                 "ネツボウソウ"                   // "THERMAL RUNAWAY"
#define MSG_ERR_MAXTEMP                     "エラー:サイコウオンチョウカ"         // "Err: MAXTEMP"
#define MSG_ERR_MINTEMP                     "エラー:サイテイオンミマン"          // "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED                 "エラー:ベッド サイコウオンチョウカ"    // "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED                 "エラー:ベッド サイテイオンミマン"     // "Err: MINTEMP BED"
#define MSG_END_HOUR                        "ジカン"                       // "hours"
#define MSG_END_MINUTE                      "フン"                         // "minutes"
#define MSG_HEATING                         "カネツチュウ"                   // "Heating..."
#define MSG_HEATING_COMPLETE                "カネツカンリョウ"                 // "Heating done."
#define MSG_BED_HEATING                     "ベッド カネツチュウ"              // "Bed Heating."
#define MSG_BED_DONE                        "ベッド カネツカンリョウ"            // "Bed done."

#define MSG_DELTA_CALIBRATE                 "デルタ コウセイ"                // "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X               "Xジク コウセイ"                 // "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y               "Yジク コウセイ"                 // "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z               "Zジク コウセイ"                 // "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER          "チュウシン コウセイ"              // "Calibrate Center"

#endif // LANGUAGE_KANA_UTF_H
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 01:19:46 -05:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 13:01:20 -05:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`/**`
			`* Japanese (Kana UTF8 version)`
			`*`
			`* LCD Menu Messages`
Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757d7986a2744136331415fbbb17758c0, but http://www.marlinfirmware.org/ isn't working. 2016-03-22 05:58:41 -05:00			`* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`*`
			`*/`
Cleanup file formatting 2015-09-11 21:52:21 -05:00
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#ifndef LANGUAGE_KANA_UTF_H`
			`#define LANGUAGE_KANA_UTF_H`

			`#define MAPPER_E382E383`
Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe 2015-03-13 08:26:58 -05:00			`// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h`
			`//#define SIMULATE_ROMFONT`
			`#define DISPLAY_CHARSET_ISO10646_KANA`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00
Update and change Japanese translation Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2") 2016-04-18 02:48:04 -05:00			`// This just to show the potential benefit of unicode.`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`// This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF.`

			`// 片仮名表示定義`
			`#define WELCOME_MSG MACHINE_NAME " ready."`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_SD_INSERTED "カードソウニュウサレマシタ" // "Card inserted"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_SD_REMOVED "カードガアリマセン" // "Card removed"`
Update and change Japanese translation Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2") 2016-04-18 02:48:04 -05:00			`#define MSG_LCD_ENDSTOPS "エンドストップ" // "Endstops" // Max length 8 characters`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_MAIN "メイン" // "Main"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_AUTOSTART "ジドウカイシ" // "Autostart"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_DISABLE_STEPPERS "モーターデンゲンオフ" // "Disable steppers"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_AUTO_HOME "ゲンテンニイドウ" // "Auto home"`
Follow-up the commit a393941 2016-04-01 21:23:33 -05:00			`#define MSG_LEVEL_BED_HOMING "ゲンテンニイドウ" // "Homing XYZ"`
Update and change Japanese translation Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2") 2016-04-18 02:48:04 -05:00			`#define MSG_LEVEL_BED_WAITING "レベリングカイシ" // "Click to Begin"`
			`#define MSG_LEVEL_BED_DONE "レベリングカンリョウ" // "Leveling Done!"`
			`#define MSG_LEVEL_BED_CANCEL "トリヤメ" // "Cancel"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_SET_HOME_OFFSETS "キジュンオフセットセッテイ" // "Set home offsets"`
Update and change Japanese translation Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2") 2016-04-18 02:48:04 -05:00			`#define MSG_HOME_OFFSETS_APPLIED "オフセットテキヨウサレマシタ" // "Offsets applied"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_SET_ORIGIN "キジュンセット" // "Set origin"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_PREHEAT_PLA "PLA ヨネツ" // "Preheat PLA"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スベテ" // " All"`
Update and change Japanese translation Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2") 2016-04-18 02:48:04 -05:00			`#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ベッド" // " Bed"`
			`#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " セッテイ" // " conf"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_PREHEAT_ABS "ABS ヨネツ" // "Preheat ABS"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " スベテ" // " All"`
Update and change Japanese translation Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2") 2016-04-18 02:48:04 -05:00			`#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " ベッド" // " Bed"`
			`#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " セッテイ" // " conf"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_COOLDOWN "カネツテイシ" // "Cooldown"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_SWITCH_PS_ON "デンゲンオン" // "Switch power on"`
			`#define MSG_SWITCH_PS_OFF "デンゲンオフ" // "Switch power off"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_EXTRUDE "オシダシ" // "Extrude"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_RETRACT "ヒキコミセッテイ" // "Retract"`
			`#define MSG_MOVE_AXIS "ジクイドウ" // "Move axis"`
			`#define MSG_LEVEL_BED "ベッドレベリング" // "Level bed"`
			`#define MSG_MOVE_X "Xジクイドウ" // "Move X"`
			`#define MSG_MOVE_Y "Yジクイドウ" // "Move Y"`
			`#define MSG_MOVE_Z "Zジクイドウ" // "Move Z"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_MOVE_E "エクストルーダー" // "Extruder"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_MOVE_01MM "0.1mm イドウ" // "Move 0.1mm"`
			`#define MSG_MOVE_1MM " 1mm イドウ" // "Move 1mm"`
			`#define MSG_MOVE_10MM " 10mm イドウ" // "Move 10mm"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_SPEED "スピード" // "Speed"`
Update Japanese trasration Follow the PR #3242. 2016-03-25 18:21:17 -05:00			`#define MSG_BED_Z "Zオフセット" // "Bed Z"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_NOZZLE "ノズル" // "Nozzle"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_BED "ベッド" // "Bed"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_FAN_SPEED "ファンソクド" // "Fan speed"`
			`#define MSG_FLOW "オクリリョウ" // "Flow"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_CONTROL "コントロール" // "Control"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_MIN LCD_STR_THERMOMETER " サイテイ" // " Min"`
			`#define MSG_MAX LCD_STR_THERMOMETER " サイコウ" // " Max"`
			`#define MSG_FACTOR LCD_STR_THERMOMETER " ファクター" // " Fact"`
			`#define MSG_AUTOTEMP "ジドウオンド" // "Autotemp"`
			`#define MSG_ON "オン " // "On "`
Added gplv3 header to all Marlin files 2016-03-24 13:01:20 -05:00			`#define MSG_OFF "オフ " // "Off"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_PID_P "PID-P"`
			`#define MSG_PID_I "PID-I"`
			`#define MSG_PID_D "PID-D"`
			`#define MSG_PID_C "PID-C"`
Update and change Japanese translation Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2") 2016-04-18 02:48:04 -05:00			`#define MSG_ACC "カソクド mm/s2" // "Accel"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_VXY_JERK "XYジクヤクド mm/s" // "Vxy-jerk"`
			`#define MSG_VZ_JERK "Zジクヤクド mm/s" // "Vz-jerk"`
			`#define MSG_VE_JERK "エクストルーダーヤクド" // "Ve-jerk"`
			`#define MSG_VMAX "サイダイフィードレート " // "Vmax "`
			`#define MSG_X "X" // "x"`
			`#define MSG_Y "Y" // "y"`
			`#define MSG_Z "Z" // "z"`
			`#define MSG_E "E" // "e"`
			`#define MSG_VMIN "サイショウフィードレート" // "Vmin"`
			`#define MSG_VTRAV_MIN "サイショウトラベルレート" // "VTrav min"`
			`#define MSG_AMAX "サイダイカソクド " // "Amax "`
			`#define MSG_A_RETRACT "ヒキコミカソクド" // "A-retract"`
			`#define MSG_A_TRAVEL "トラベルカソクド" // "A-travel"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_XSTEPS "Xsteps/mm"`
			`#define MSG_YSTEPS "Ysteps/mm"`
			`#define MSG_ZSTEPS "Zsteps/mm"`
			`#define MSG_ESTEPS "Esteps/mm"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_TEMPERATURE "オンド" // "Temperature"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_MOTION "ウゴキセッテイ" // "Motion"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_VOLUMETRIC "フィラメント" // "Filament"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_VOLUMETRIC_ENABLED "E in mm3"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_FILAMENT_DIAM "フィラメントチョッケイ" // "Fil. Dia."`
			`#define MSG_CONTRAST "LCDコントラスト" // "LCD contrast"`
			`#define MSG_STORE_EPROM "メモリヘカクノウ" // "Store memory"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_LOAD_EPROM "メモリカラヨミコミ" // "Load memory"`
			`#define MSG_RESTORE_FAILSAFE "セッテイリセット" // "Restore failsafe"`
			`#define MSG_REFRESH "リフレッシュ" // "Refresh"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_WATCH "インフォ" // "Info screen"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_PREPARE "ジュンビセッテイ" // "Prepare"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_TUNE "チョウセイ" // "Tune"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_PAUSE_PRINT "イチジテイシ" // "Pause print"`
			`#define MSG_RESUME_PRINT "プリントサイカイ" // "Resume print"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_STOP_PRINT "プリントテイシ" // "Stop print"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_CARD_MENU "SDカードカラプリント" // "Print from SD"`
			`#define MSG_NO_CARD "SDカードガアリマセン" // "No SD card"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_DWELL "スリープ" // "Sleep..."`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_USERWAIT "シバラクオマチクダサイ" // "Wait for user..."`
			`#define MSG_RESUMING "プリントサイカイ" // "Resuming print"`
			`#define MSG_PRINT_ABORTED "プリントチュウシサレマシタ" // "Print aborted"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 13:47:40 -05:00			`#define MSG_NO_MOVE "ウゴキマセン" // "No move."`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_KILLED "ヒジョウテイシ" // "KILLED. "`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_STOPPED "テイシシマシタ" // "STOPPED. "`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_CONTROL_RETRACT "ヒキコミリョウ mm" // "Retract mm"`
			`#define MSG_CONTROL_RETRACT_SWAP "ヒキコミリョウS mm" // "Swap Re.mm"`
			`#define MSG_CONTROL_RETRACTF "ヒキコミレート mm/s" // "Retract V"`
			`#define MSG_CONTROL_RETRACT_ZLIFT "ノズルタイヒ mm" // "Hop mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER "リカバー +mm" // "UnRet +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP "リカバーS +mm" // "S UnRet+mm"`
			`#define MSG_CONTROL_RETRACT_RECOVERF "リカバーレート mm/s" // "UnRet V"`
			`#define MSG_AUTORETRACT "ジドウヒキコミ" // "AutoRetr."`
			`#define MSG_FILAMENTCHANGE "フィラメントコウカン" // "Change filament"`
			`#define MSG_INIT_SDCARD "SDカードサイヨミコミ" // "Init. SD card"`
			`#define MSG_CNG_SDCARD "SDカードコウカン" // "Change SD card"`
			`#define MSG_ZPROBE_OUT "Zプローブベッドガイ" // "Z probe out. bed"`
axis_known_position -> axis_homed In all these cases we want the axis to be homed. If we could have lost some steps is secondary. Reenables homing seperate axis with DISABLE_X / DISABLE_Y true. 2016-03-25 08:05:20 -05:00			`#define MSG_YX_UNHOMED "ゲンテンハXYイドウゴZ" // "Home X/Y before Z"`
Update language_kana_utf8.h 2015-10-25 06:45:48 -05:00			`#define MSG_ZPROBE_ZOFFSET "Zオフセット" // "Z Offset"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_BABYSTEP_X "Xジクビドウ" // "Babystep X"`
			`#define MSG_BABYSTEP_Y "Yジクビドウ" // "Babystep Y"`
			`#define MSG_BABYSTEP_Z "Zジクビドウ" // "Babystep Z"`
			`#define MSG_ENDSTOP_ABORT "エンドストップサドウ" // "Endstop abort"`
			`#define MSG_HEATING_FAILED_LCD "カネツシッパイ" // "Heating failed"`
Remove redundant text from MSG_ERR_REDUNDANT_TEMP 2016-04-10 21:10:55 -05:00			`#define MSG_ERR_REDUNDANT_TEMP "エラー:ジョウチョウサーミスターキノウ" // "Err: REDUNDANT TEMP"`
Update Japanese translation 2016-03-22 05:34:21 -05:00			`#define MSG_THERMAL_RUNAWAY "ネツボウソウ" // "THERMAL RUNAWAY"`
			`#define MSG_ERR_MAXTEMP "エラー:サイコウオンチョウカ" // "Err: MAXTEMP"`
			`#define MSG_ERR_MINTEMP "エラー:サイテイオンミマン" // "Err: MINTEMP"`
			`#define MSG_ERR_MAXTEMP_BED "エラー:ベッドサイコウオンチョウカ" // "Err: MAXTEMP BED"`
			`#define MSG_ERR_MINTEMP_BED "エラー:ベッドサイテイオンミマン" // "Err: MINTEMP BED"`
			`#define MSG_END_HOUR "ジカン" // "hours"`
			`#define MSG_END_MINUTE "フン" // "minutes"`
			`#define MSG_HEATING "カネツチュウ" // "Heating..."`
			`#define MSG_HEATING_COMPLETE "カネツカンリョウ" // "Heating done."`
			`#define MSG_BED_HEATING "ベッドカネツチュウ" // "Bed Heating."`
			`#define MSG_BED_DONE "ベッドカネツカンリョウ" // "Bed done."`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00
General language file cleanup 2016-04-11 21:42:09 -05:00			`#define MSG_DELTA_CALIBRATE "デルタコウセイ" // "Delta Calibration"`
			`#define MSG_DELTA_CALIBRATE_X "Xジクコウセイ" // "Calibrate X"`
			`#define MSG_DELTA_CALIBRATE_Y "Yジクコウセイ" // "Calibrate Y"`
			`#define MSG_DELTA_CALIBRATE_Z "Zジクコウセイ" // "Calibrate Z"`
			`#define MSG_DELTA_CALIBRATE_CENTER "チュウシンコウセイ" // "Calibrate Center"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00
			`#endif // LANGUAGE_KANA_UTF_H`