Marlin_Firmware/Marlin/src/lcd/language/language_test.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * TEST
 *
 * LCD Menu Messages
 * See also http://marlinfw.org/docs/development/lcd_language.html
 *
 */

// Select ONE of the following Mappers.
// They decide what to do with a symbol in the area of [0x80:0xFF]. They take a symbol of this language file and make them point
// into an array with 128 cells, where they'll find the place of the symbol of the font in use.
//
// a.)For ASCII coded Language_xx.h files like (en) there are no occurrences of symbols above 0x7F so no mapper is needed.
//   If such a symbol appears it is mapped directly into the font. This is the case for the language files we used until now, with all the STR_XX or
//   "\xxx" symbols. All Symbols are only one byte long.
// b.) For Unicoded Language_xx.h files (currently ru, de and kana_utf8 ) the non ASCII [0x00-0x7F] symbols are represented by more than one byte.
//   In the case of two bytes the first is pointing to a 'codepage' and the second to a place in the codepage. These codepages contain 64 symbols.
//   So two of them can be mapped. For most of the European languages the necessary symbols are contained in the pages C2 and C3. Cyrillic uses D0
//   and D1.
// c.) For katakana (one of the Japanese symbol sets) Unicode uses 3 bytes. Here the second byte also points to a codepage and byte 3 to the symbol.
//   I hope the pages E282 and E283 are sufficient to write katakana.
//   Kanji (an other Japanese symbol set) uses far more than two codepages. So currently I don't see a chance to map the Unicodes. Its not
//   impossible to have a close to direct mapping but will need giant conversion tables and fonts (we don't want to have in a embedded system).


// Select the better font for full graphic displays.
//#define DISPLAY_CHARSET_ISO10646_1
//#define DISPLAY_CHARSET_ISO10646_5
//#define DISPLAY_CHARSET_ISO10646_GREEK
//#define DISPLAY_CHARSET_ISO10646_KANA


// next 5 lines select variants in this file only
#define DISPLAYTEST
//#define WEST
//#define CYRIL
//#define KANA


// TESTSTRINGS

#define STRG_ASCII_2 _UxGT(" !\"#$%&'()*+,-./")
#define STRG_ASCII_3 _UxGT("0123456789:;<=>?")
#define STRG_ASCII_4 _UxGT("@ABCDEFGHIJKLMNO")
#define STRG_ASCII_5 _UxGT("PQRSTUVWXYZ[\\]^_")
#define STRG_ASCII_6 _UxGT("`abcdefghijklmno")
#define STRG_ASCII_7 _UxGT("pqrstuvwxyz{|}~")

#define STRG_C2_8 _UxGT("")
#define STRG_C2_9 _UxGT("")
#define STRG_C2_a _UxGT(" ¡¢£¤¥¦§¨©ª«¬®¯")
#define STRG_C2_b _UxGT("°±²³´µ¶·¸¹º»¼½¾¿")
#define STRG_C3_8 _UxGT("ÈÁÂÃÄÅÆÇÈÉÊËÌÍÎÏ")
#define STRG_C3_9 _UxGT("ÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞß")
#define STRG_C3_a _UxGT("àáâãäåæçèéêëìíîï")
#define STRG_C3_b _UxGT("ðñòóôõö÷øùúûüýþÿ")

#define STRG_D0_8 _UxGT("ЀЁЂЃЄЅІЇЈЉЊЋЌЍЎЏ")
#define STRG_D0_9 _UxGT("АБВГДЕЖЗИЙКЛМНОП")
#define STRG_D0_a _UxGT("РСТУФХЦЧШЩЪЫЬЭЮЯ")
#define STRG_D0_b _UxGT("абвгдежзийклмноп")
#define STRG_D1_8 _UxGT("рстуфхцчшщъыьэюя")
#define STRG_D1_9 _UxGT("ѐёђѓєѕіїјљњћќѝўџ")
#define STRG_D1_a _UxGT("ѠѡѢѣѤѥѦѧѨѩѪѫѬѭѮѯ")
#define STRG_D1_b _UxGT("ѰѱѲѳѴѵѶѷѸѹѺѻѼѽѾѿ")

#define STRG_E382_8 _UxGT("よめもゃやゅゆょよらりるれろゎわ")
#define STRG_E382_9 _UxGT("ゐゑをんゔゕゖ゗゘゙゚゛ ゜ゝゞゟ")
#define STRG_E382_a _UxGT("゠ァアィイゥウェエォオカガキギク")
#define STRG_E382_b _UxGT("グケゲコゴサザシジスズセゼソゾタ")
#define STRG_E383_8 _UxGT("トチヂッツヅテデトドナニヌネノハ")
#define STRG_E383_9 _UxGT("バパヒビピフブプヘベペホボポマミ")
#define STRG_E383_a _UxGT("ムメモャヤュユョヨラリルレロヮワ")
#define STRG_E383_b _UxGT("ヰヱヲンヴヵヶヷヸヹヺ・ーヽヾヿ")

#define STRG_OKTAL_0 "\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017"
#define STRG_OKTAL_1 "\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
#define STRG_OKTAL_2 "\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057"
#define STRG_OKTAL_3 "\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077"
#define STRG_OKTAL_4 "\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117"
#define STRG_OKTAL_5 "\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137"
#define STRG_OKTAL_6 "\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157"
#define STRG_OKTAL_7 "\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177"
#define STRG_OKTAL_8 "\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217"
#define STRG_OKTAL_9 "\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237"
#define STRG_OKTAL_a "\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257"
#define STRG_OKTAL_b "\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277"
#define STRG_OKTAL_c "\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317"
#define STRG_OKTAL_d "\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337"
#define STRG_OKTAL_e "\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357"
#define STRG_OKTAL_f "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377"

namespace Language_test {
  using namespace Language_en; // Inherit undefined strings from English

  constexpr uint8_t    CHARSIZE                              = 1;

  #if ENABLED(DISPLAYTEST)
    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");

    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("Display test");
    PROGMEM Language_Str MSG_PREPARE                         = STRG_OKTAL_b;
    PROGMEM Language_Str MSG_CONTROL                         = STRG_OKTAL_c;
  #endif

  #if ENABLED(WEST)
    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");

    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("\001\002\003\004\005\006\007\010\011");
    PROGMEM Language_Str MSG_PREPARE                         = _UxGT("UTF8");
    PROGMEM Language_Str MSG_CONTROL                         = _UxGT("ASCII");

    PROGMEM Language_Str MSG_MAIN                            = _UxGT("..");
    PROGMEM Language_Str MSG_DISABLE_STEPPERS                = STRG_C2_8;
    PROGMEM Language_Str MSG_AUTO_HOME                       = STRG_C2_9;
    PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = STRG_C2_a;
    PROGMEM Language_Str MSG_PREHEAT_1                       = STRG_C2_b;
    PROGMEM Language_Str MSG_PREHEAT_2                       = STRG_C3_8;
    PROGMEM Language_Str MSG_COOLDOWN                        = STRG_C3_9;
    PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = STRG_C3_a;
    PROGMEM Language_Str MSG_MOVE_AXIS                       = STRG_C3_b;

    PROGMEM Language_Str MSG_MAIN                            = STRG_OKTAL_2;
    PROGMEM Language_Str MSG_TEMPERATURE                     = STRG_OKTAL_3;
    PROGMEM Language_Str MSG_MOTION                          = STRG_OKTAL_4;
    PROGMEM Language_Str MSG_FILAMENT                        = STRG_OKTAL_5;
    PROGMEM Language_Str MSG_CONTRAST                        = STRG_OKTAL_6;
    PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = STRG_OKTAL_7;

    PROGMEM Language_Str MSG_NOZZLE                          = STRG_OKTAL_8;
    PROGMEM Language_Str MSG_NOZZLE_N                        = STRG_OKTAL_8 " ~";
    PROGMEM Language_Str MSG_FAN_SPEED                       = STRG_OKTAL_9;
    PROGMEM Language_Str MSG_FAN_SPEED_N                     = STRG_OKTAL_9;
    PROGMEM Language_Str MSG_AUTOTEMP                        = STRG_OKTAL_a;
    PROGMEM Language_Str MSG_MIN                             = STRG_OKTAL_b;
    PROGMEM Language_Str MSG_MAX                             = STRG_OKTAL_c;
    PROGMEM Language_Str MSG_FACTOR                          = STRG_OKTAL_d;
    PROGMEM Language_Str MSG_PID_P                           = STRG_OKTAL_e;
    PROGMEM Language_Str MSG_PID_I                           = STRG_OKTAL_f;

  #endif

  #if ENABLED(CYRIL)
    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");

    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("\001\002\003\004\005\006\007\010\011");
    PROGMEM Language_Str MSG_PREPARE                         = _UxGT("UTF8");
    PROGMEM Language_Str MSG_CONTROL                         = _UxGT("ASCII");

    PROGMEM Language_Str MSG_MAIN                            = _UxGT("..");
    PROGMEM Language_Str MSG_DISABLE_STEPPERS                = STRG_D0_8;
    PROGMEM Language_Str MSG_AUTO_HOME                       = STRG_D0_9;
    PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = STRG_D0_a;
    PROGMEM Language_Str MSG_PREHEAT_1                       = STRG_D0_b;
    PROGMEM Language_Str MSG_PREHEAT_2                       = STRG_D1_8;
    PROGMEM Language_Str MSG_COOLDOWN                        = STRG_D1_9;
    PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = STRG_D1_a;
    PROGMEM Language_Str MSG_MOVE_AXIS                       = STRG_D1_b;

    PROGMEM Language_Str MSG_MAIN                            = STRG_OKTAL_2;
    PROGMEM Language_Str MSG_TEMPERATURE                     = STRG_OKTAL_3;
    PROGMEM Language_Str MSG_MOTION                          = STRG_OKTAL_4;
    PROGMEM Language_Str MSG_FILAMENT                        = STRG_OKTAL_5;
    PROGMEM Language_Str MSG_CONTRAST                        = STRG_OKTAL_6;
    PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = STRG_OKTAL_7;

    PROGMEM Language_Str MSG_NOZZLE                          = STRG_OKTAL_8;
    PROGMEM Language_Str MSG_NOZZLE_N                        = STRG_OKTAL_8 " ~";
    PROGMEM Language_Str MSG_FAN_SPEED_N                     = STRG_OKTAL_9;
    PROGMEM Language_Str MSG_AUTOTEMP                        = STRG_OKTAL_a;
    PROGMEM Language_Str MSG_MIN                             = STRG_OKTAL_b;
    PROGMEM Language_Str MSG_MAX                             = STRG_OKTAL_c;
    PROGMEM Language_Str MSG_FACTOR                          = STRG_OKTAL_d;
    PROGMEM Language_Str MSG_PID_P                           = STRG_OKTAL_e;
    PROGMEM Language_Str MSG_PID_I                           = STRG_OKTAL_f;

  #endif

  #if ENABLED(KANA)
    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");

    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("\001\002\003\004\005\006\007\010\011");
    PROGMEM Language_Str MSG_PREPARE                         = _UxGT("UTF8");
    PROGMEM Language_Str MSG_CONTROL                         = _UxGT("ASCII");

    PROGMEM Language_Str MSG_MAIN                            = _UxGT("..");
    PROGMEM Language_Str MSG_DISABLE_STEPPERS                = STRG_E382_8;
    PROGMEM Language_Str MSG_AUTO_HOME                       = STRG_E382_9;
    PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = STRG_E382_a;
    PROGMEM Language_Str MSG_PREHEAT_1                       = STRG_E382_b;
    PROGMEM Language_Str MSG_PREHEAT_2                       = STRG_E383_8;
    PROGMEM Language_Str MSG_COOLDOWN                        = STRG_E383_9;
    PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = STRG_E383_a;
    PROGMEM Language_Str MSG_MOVE_AXIS                       = STRG_E383_b;

    PROGMEM Language_Str MSG_MAIN                            = STRG_OKTAL_2;
    PROGMEM Language_Str MSG_TEMPERATURE                     = STRG_OKTAL_3;
    PROGMEM Language_Str MSG_MOTION                          = STRG_OKTAL_4;
    PROGMEM Language_Str MSG_FILAMENT                        = STRG_OKTAL_5;
    PROGMEM Language_Str MSG_CONTRAST                        = STRG_OKTAL_6;
    PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = STRG_OKTAL_7;

    PROGMEM Language_Str MSG_NOZZLE                          = STRG_OKTAL_8;
    PROGMEM Language_Str MSG_NOZZLE_N                        = STRG_OKTAL_8 " ~";
    PROGMEM Language_Str MSG_FAN_SPEED_N                     = STRG_OKTAL_9;
    PROGMEM Language_Str MSG_AUTOTEMP                        = STRG_OKTAL_a;
    PROGMEM Language_Str MSG_MIN                             = STRG_OKTAL_b;
    PROGMEM Language_Str MSG_MAX                             = STRG_OKTAL_c;
    PROGMEM Language_Str MSG_FACTOR                          = STRG_OKTAL_d;
    PROGMEM Language_Str MSG_PID_P                           = STRG_OKTAL_e;
    PROGMEM Language_Str MSG_PID_I                           = STRG_OKTAL_f;
  #endif
}
-												Further cleanup of comments, partial Doxygen-style

Following up on #3231

											
										
										
											2016-03-25 01:19:46 -05:00
+								/**
-												Added gplv3 header to all Marlin files

											
										
										
											2016-03-24 13:01:20 -05:00
+								 * Marlin 3D Printer Firmware
-												(c) 2020

											
										
										
											2020-02-03 08:00:57 -06:00
+								 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
-												Added gplv3 header to all Marlin files

											
										
										
											2016-03-24 13:01:20 -05:00
+								 *
 								 * Based on Sprinter and grbl.
-												Tweaky change from (C) to (c)

											
										
										
											2019-06-27 23:57:50 -05:00
+								 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
-												Added gplv3 header to all Marlin files

											
										
										
											2016-03-24 13:01:20 -05:00
+								 *
 								 * This program is free software: you can redistribute it and/or modify
 								 * it under the terms of the GNU General Public License as published by
 								 * the Free Software Foundation, either version 3 of the License, or
 								 * (at your option) any later version.
 								 *
 								 * This program is distributed in the hope that it will be useful,
 								 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 								 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 								 * GNU General Public License for more details.
 								 *
 								 * You should have received a copy of the GNU General Public License
 								 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 								 *
 								 */
-												Apply #pragma once, misc cleanup (#12322)

* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting

											
										
										
											2018-11-04 02:25:55 -06:00
+								#pragma once
-												Added gplv3 header to all Marlin files

											
										
										
											2016-03-24 13:01:20 -05:00
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								/**
 								 * TEST
 								 *
 								 * LCD Menu Messages
-												Language updates

											
										
										
											2017-09-06 06:28:32 -05:00
+								 * See also http://marlinfw.org/docs/development/lcd_language.html
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								 *
 								 */
-												Cleanup file formatting

											
										
										
											2015-09-11 21:52:21 -05:00
+								// Select ONE of the following Mappers.
 								// They decide what to do with a symbol in the area of [0x80:0xFF]. They take a symbol of this language file and make them point
-												Change selection logic another time

Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe

											
										
										
											2015-03-13 08:26:58 -05:00
+								// into an array with 128 cells, where they'll find the place of the symbol of the font in use.
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								//
-												Cleanup file formatting

											
										
										
											2015-09-11 21:52:21 -05:00
+								// a.)For ASCII coded Language_xx.h files like (en) there are no occurrences of symbols above 0x7F so no mapper is needed.
-												Change selection logic another time

Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe

											
										
										
											2015-03-13 08:26:58 -05:00
+								//   If such a symbol appears it is mapped directly into the font. This is the case for the language files we used until now, with all the STR_XX or
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								//   "\xxx" symbols. All Symbols are only one byte long.
-												Fix minor spelling in comments

											
										
										
											2016-04-14 22:06:59 -05:00
+								// b.) For Unicoded Language_xx.h files (currently ru, de and kana_utf8 ) the non ASCII [0x00-0x7F] symbols are represented by more than one byte.
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								//   In the case of two bytes the first is pointing to a 'codepage' and the second to a place in the codepage. These codepages contain 64 symbols.
-												Cleanup file formatting

											
										
										
											2015-09-11 21:52:21 -05:00
+								//   So two of them can be mapped. For most of the European languages the necessary symbols are contained in the pages C2 and C3. Cyrillic uses D0
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								//   and D1.
 								// c.) For katakana (one of the Japanese symbol sets) Unicode uses 3 bytes. Here the second byte also points to a codepage and byte 3 to the symbol.
 								//   I hope the pages E282 and E283 are sufficient to write katakana.
 								//   Kanji (an other Japanese symbol set) uses far more than two codepages. So currently I don't see a chance to map the Unicodes. Its not
 								//   impossible to have a close to direct mapping but will need giant conversion tables and fonts (we don't want to have in a embedded system).
-												Removed Kanji.

											
										
										
											2015-03-15 10:44:37 -05:00
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
-												Change selection logic another time

Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe

											
										
										
											2015-03-13 08:26:58 -05:00
+								// Select the better font for full graphic displays.
 								//#define DISPLAY_CHARSET_ISO10646_1
 								//#define DISPLAY_CHARSET_ISO10646_5
-												Greek language pack from @psavva

											
										
										
											2016-07-10 20:59:04 -05:00
+								//#define DISPLAY_CHARSET_ISO10646_GREEK
-												Change selection logic another time

Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe

											
										
										
											2015-03-13 08:26:58 -05:00
+								//#define DISPLAY_CHARSET_ISO10646_KANA
-												Removed Kanji.

											
										
										
											2015-03-15 10:44:37 -05:00
-												Change selection logic another time

Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe

											
										
										
											2015-03-13 08:26:58 -05:00
 								// next 5 lines select variants in this file only
-												Add user test to language_test.h and make it default.

Improve description in Configuration.h

											
										
										
											2015-03-11 14:46:52 -05:00
+								#define DISPLAYTEST
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								//#define WEST
-												Add user test to language_test.h and make it default.

Improve description in Configuration.h

											
										
										
											2015-03-11 14:46:52 -05:00
+								//#define CYRIL
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
+								//#define KANA
-												Removed Kanji.

											
										
										
											2015-03-15 10:44:37 -05:00
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
 								// TESTSTRINGS
-												support utf8 unicode for test language (#10220)


											
										
										
											2018-04-02 20:03:25 -05:00
+								#define STRG_ASCII_2 _UxGT(" !\"#$%&'()*+,-./")
 								#define STRG_ASCII_3 _UxGT("0123456789:;<=>?")
 								#define STRG_ASCII_4 _UxGT("@ABCDEFGHIJKLMNO")
-												Fix backslash in language_test.h

											
										
										
											2018-11-23 20:37:39 -06:00
+								#define STRG_ASCII_5 _UxGT("PQRSTUVWXYZ[\\]^_")
-												support utf8 unicode for test language (#10220)


											
										
										
											2018-04-02 20:03:25 -05:00
+								#define STRG_ASCII_6 _UxGT("`abcdefghijklmno")
 								#define STRG_ASCII_7 _UxGT("pqrstuvwxyz{|}~")
 								#define STRG_C2_8 _UxGT("")
 								#define STRG_C2_9 _UxGT("")
 								#define STRG_C2_a _UxGT(" ¡¢£¤¥¦§¨©ª«¬®¯")
 								#define STRG_C2_b _UxGT("°±²³´µ¶·¸¹º»¼½¾¿")
 								#define STRG_C3_8 _UxGT("ÈÁÂÃÄÅÆÇÈÉÊËÌÍÎÏ")
 								#define STRG_C3_9 _UxGT("ÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞß")
 								#define STRG_C3_a _UxGT("àáâãäåæçèéêëìíîï")
 								#define STRG_C3_b _UxGT("ðñòóôõö÷øùúûüýþÿ")
 								#define STRG_D0_8 _UxGT("ЀЁЂЃЄЅІЇЈЉЊЋЌЍЎЏ")
 								#define STRG_D0_9 _UxGT("АБВГДЕЖЗИЙКЛМНОП")
 								#define STRG_D0_a _UxGT("РСТУФХЦЧШЩЪЫЬЭЮЯ")
 								#define STRG_D0_b _UxGT("абвгдежзийклмноп")
 								#define STRG_D1_8 _UxGT("рстуфхцчшщъыьэюя")
 								#define STRG_D1_9 _UxGT("ѐёђѓєѕіїјљњћќѝўџ")
 								#define STRG_D1_a _UxGT("ѠѡѢѣѤѥѦѧѨѩѪѫѬѭѮѯ")
 								#define STRG_D1_b _UxGT("ѰѱѲѳѴѵѶѷѸѹѺѻѼѽѾѿ")
 								#define STRG_E382_8 _UxGT("よめもゃやゅゆょよらりるれろゎわ")
 								#define STRG_E382_9 _UxGT("ゐゑをんゔゕゖ゗゘゙゚゛ ゜ゝゞゟ")
 								#define STRG_E382_a _UxGT("゠ァアィイゥウェエォオカガキギク")
 								#define STRG_E382_b _UxGT("グケゲコゴサザシジスズセゼソゾタ")
 								#define STRG_E383_8 _UxGT("トチヂッツヅテデトドナニヌネノハ")
 								#define STRG_E383_9 _UxGT("バパヒビピフブプヘベペホボポマミ")
 								#define STRG_E383_a _UxGT("ムメモャヤュユョヨラリルレロヮワ")
 								#define STRG_E383_b _UxGT("ヰヱヲンヴヵヶヷヸヹヺ・ーヽヾヿ")
-												Add a test_language.

Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."

											
										
										
											2015-03-10 11:59:28 -05:00
 								#define STRG_OKTAL_0 "\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017"
 								#define STRG_OKTAL_1 "\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
 								#define STRG_OKTAL_2 "\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057"
 								#define STRG_OKTAL_3 "\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077"
 								#define STRG_OKTAL_4 "\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117"
 								#define STRG_OKTAL_5 "\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137"
 								#define STRG_OKTAL_6 "\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157"
 								#define STRG_OKTAL_7 "\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177"
 								#define STRG_OKTAL_8 "\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217"
 								#define STRG_OKTAL_9 "\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237"
 								#define STRG_OKTAL_a "\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257"
 								#define STRG_OKTAL_b "\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277"
 								#define STRG_OKTAL_c "\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317"
 								#define STRG_OKTAL_d "\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337"
 								#define STRG_OKTAL_e "\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357"
 								#define STRG_OKTAL_f "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377"
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								namespace Language_test {
 								  using namespace Language_en; // Inherit undefined strings from English
 								  constexpr uint8_t    CHARSIZE                              = 1;
 								  #if ENABLED(DISPLAYTEST)
 								    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");
-												MSG_WATCH => MSG_INFO_SCREEN

											
										
										
											2020-01-03 19:46:05 -06:00
+								    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("Display test");
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_PREPARE                         = STRG_OKTAL_b;
 								    PROGMEM Language_Str MSG_CONTROL                         = STRG_OKTAL_c;
 								  #endif
 								  #if ENABLED(WEST)
 								    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");
-												MSG_WATCH => MSG_INFO_SCREEN

											
										
										
											2020-01-03 19:46:05 -06:00
+								    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("\001\002\003\004\005\006\007\010\011");
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_PREPARE                         = _UxGT("UTF8");
 								    PROGMEM Language_Str MSG_CONTROL                         = _UxGT("ASCII");
 								    PROGMEM Language_Str MSG_MAIN                            = _UxGT("..");
 								    PROGMEM Language_Str MSG_DISABLE_STEPPERS                = STRG_C2_8;
 								    PROGMEM Language_Str MSG_AUTO_HOME                       = STRG_C2_9;
 								    PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = STRG_C2_a;
 								    PROGMEM Language_Str MSG_PREHEAT_1                       = STRG_C2_b;
 								    PROGMEM Language_Str MSG_PREHEAT_2                       = STRG_C3_8;
 								    PROGMEM Language_Str MSG_COOLDOWN                        = STRG_C3_9;
 								    PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = STRG_C3_a;
 								    PROGMEM Language_Str MSG_MOVE_AXIS                       = STRG_C3_b;
 								    PROGMEM Language_Str MSG_MAIN                            = STRG_OKTAL_2;
 								    PROGMEM Language_Str MSG_TEMPERATURE                     = STRG_OKTAL_3;
 								    PROGMEM Language_Str MSG_MOTION                          = STRG_OKTAL_4;
 								    PROGMEM Language_Str MSG_FILAMENT                        = STRG_OKTAL_5;
 								    PROGMEM Language_Str MSG_CONTRAST                        = STRG_OKTAL_6;
-												Language: "failsafe" => "Defaults"

											
										
										
											2020-02-26 02:02:20 -06:00
+								    PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = STRG_OKTAL_7;
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
 								    PROGMEM Language_Str MSG_NOZZLE                          = STRG_OKTAL_8;
-												Reduced string storage using tokens (#15593)


											
										
										
											2019-11-14 20:30:30 -06:00
+								    PROGMEM Language_Str MSG_NOZZLE_N                        = STRG_OKTAL_8 " ~";
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_FAN_SPEED                       = STRG_OKTAL_9;
-												Reduced string storage using tokens (#15593)


											
										
										
											2019-11-14 20:30:30 -06:00
+								    PROGMEM Language_Str MSG_FAN_SPEED_N                     = STRG_OKTAL_9;
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_AUTOTEMP                        = STRG_OKTAL_a;
 								    PROGMEM Language_Str MSG_MIN                             = STRG_OKTAL_b;
 								    PROGMEM Language_Str MSG_MAX                             = STRG_OKTAL_c;
 								    PROGMEM Language_Str MSG_FACTOR                          = STRG_OKTAL_d;
 								    PROGMEM Language_Str MSG_PID_P                           = STRG_OKTAL_e;
 								    PROGMEM Language_Str MSG_PID_I                           = STRG_OKTAL_f;
 								  #endif
 								  #if ENABLED(CYRIL)
 								    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");
-												MSG_WATCH => MSG_INFO_SCREEN

											
										
										
											2020-01-03 19:46:05 -06:00
+								    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("\001\002\003\004\005\006\007\010\011");
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_PREPARE                         = _UxGT("UTF8");
 								    PROGMEM Language_Str MSG_CONTROL                         = _UxGT("ASCII");
 								    PROGMEM Language_Str MSG_MAIN                            = _UxGT("..");
 								    PROGMEM Language_Str MSG_DISABLE_STEPPERS                = STRG_D0_8;
 								    PROGMEM Language_Str MSG_AUTO_HOME                       = STRG_D0_9;
 								    PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = STRG_D0_a;
 								    PROGMEM Language_Str MSG_PREHEAT_1                       = STRG_D0_b;
 								    PROGMEM Language_Str MSG_PREHEAT_2                       = STRG_D1_8;
 								    PROGMEM Language_Str MSG_COOLDOWN                        = STRG_D1_9;
 								    PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = STRG_D1_a;
 								    PROGMEM Language_Str MSG_MOVE_AXIS                       = STRG_D1_b;
 								    PROGMEM Language_Str MSG_MAIN                            = STRG_OKTAL_2;
 								    PROGMEM Language_Str MSG_TEMPERATURE                     = STRG_OKTAL_3;
 								    PROGMEM Language_Str MSG_MOTION                          = STRG_OKTAL_4;
 								    PROGMEM Language_Str MSG_FILAMENT                        = STRG_OKTAL_5;
 								    PROGMEM Language_Str MSG_CONTRAST                        = STRG_OKTAL_6;
-												Language: "failsafe" => "Defaults"

											
										
										
											2020-02-26 02:02:20 -06:00
+								    PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = STRG_OKTAL_7;
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
 								    PROGMEM Language_Str MSG_NOZZLE                          = STRG_OKTAL_8;
-												Reduced string storage using tokens (#15593)


											
										
										
											2019-11-14 20:30:30 -06:00
+								    PROGMEM Language_Str MSG_NOZZLE_N                        = STRG_OKTAL_8 " ~";
 								    PROGMEM Language_Str MSG_FAN_SPEED_N                     = STRG_OKTAL_9;
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_AUTOTEMP                        = STRG_OKTAL_a;
 								    PROGMEM Language_Str MSG_MIN                             = STRG_OKTAL_b;
 								    PROGMEM Language_Str MSG_MAX                             = STRG_OKTAL_c;
 								    PROGMEM Language_Str MSG_FACTOR                          = STRG_OKTAL_d;
 								    PROGMEM Language_Str MSG_PID_P                           = STRG_OKTAL_e;
 								    PROGMEM Language_Str MSG_PID_I                           = STRG_OKTAL_f;
 								  #endif
 								  #if ENABLED(KANA)
 								    PROGMEM Language_Str WELCOME_MSG                         = _UxGT("Language TEST");
-												MSG_WATCH => MSG_INFO_SCREEN

											
										
										
											2020-01-03 19:46:05 -06:00
+								    PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("\001\002\003\004\005\006\007\010\011");
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_PREPARE                         = _UxGT("UTF8");
 								    PROGMEM Language_Str MSG_CONTROL                         = _UxGT("ASCII");
 								    PROGMEM Language_Str MSG_MAIN                            = _UxGT("..");
 								    PROGMEM Language_Str MSG_DISABLE_STEPPERS                = STRG_E382_8;
 								    PROGMEM Language_Str MSG_AUTO_HOME                       = STRG_E382_9;
 								    PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = STRG_E382_a;
 								    PROGMEM Language_Str MSG_PREHEAT_1                       = STRG_E382_b;
 								    PROGMEM Language_Str MSG_PREHEAT_2                       = STRG_E383_8;
 								    PROGMEM Language_Str MSG_COOLDOWN                        = STRG_E383_9;
 								    PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = STRG_E383_a;
 								    PROGMEM Language_Str MSG_MOVE_AXIS                       = STRG_E383_b;
 								    PROGMEM Language_Str MSG_MAIN                            = STRG_OKTAL_2;
 								    PROGMEM Language_Str MSG_TEMPERATURE                     = STRG_OKTAL_3;
 								    PROGMEM Language_Str MSG_MOTION                          = STRG_OKTAL_4;
 								    PROGMEM Language_Str MSG_FILAMENT                        = STRG_OKTAL_5;
 								    PROGMEM Language_Str MSG_CONTRAST                        = STRG_OKTAL_6;
-												Language: "failsafe" => "Defaults"

											
										
										
											2020-02-26 02:02:20 -06:00
+								    PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = STRG_OKTAL_7;
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
 								    PROGMEM Language_Str MSG_NOZZLE                          = STRG_OKTAL_8;
-												Reduced string storage using tokens (#15593)


											
										
										
											2019-11-14 20:30:30 -06:00
+								    PROGMEM Language_Str MSG_NOZZLE_N                        = STRG_OKTAL_8 " ~";
 								    PROGMEM Language_Str MSG_FAN_SPEED_N                     = STRG_OKTAL_9;
-												Multi-language support (#15453)


											
										
										
											2019-10-09 19:46:10 -05:00
+								    PROGMEM Language_Str MSG_AUTOTEMP                        = STRG_OKTAL_a;
 								    PROGMEM Language_Str MSG_MIN                             = STRG_OKTAL_b;
 								    PROGMEM Language_Str MSG_MAX                             = STRG_OKTAL_c;
 								    PROGMEM Language_Str MSG_FACTOR                          = STRG_OKTAL_d;
 								    PROGMEM Language_Str MSG_PID_P                           = STRG_OKTAL_e;
 								    PROGMEM Language_Str MSG_PID_I                           = STRG_OKTAL_f;
 								  #endif
 								}