Marlin_Firmware/Marlin/language_de.h

268 lines
16 KiB
C
Raw Normal View History

/**
2016-03-24 13:01:20 -05:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* German
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_DE_H
#define LANGUAGE_DE_H
#define MAPPER_C2C3
#define DISPLAY_CHARSET_ISO10646_1
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³")
2016-12-12 09:18:53 -06:00
#define WELCOME_MSG MACHINE_NAME _UxGT(" bereit")
#define MSG_BACK _UxGT("Zurück")
2016-12-12 09:18:53 -06:00
#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt")
#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters
#define MSG_MAIN _UxGT("Hauptmenü")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84
#define MSG_AUTO_HOME _UxGT("Home") // G28
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")
#define MSG_LEVEL_BED_DONE _UxGT("Fertig")
#define MSG_LEVEL_BED_CANCEL _UxGT("Abbruch")
#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")
#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA")
#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Extr.")
2016-12-12 09:18:53 -06:00
#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.")
#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS")
#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Extr.")
2016-12-12 09:18:53 -06:00
#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.")
#define MSG_COOLDOWN _UxGT("Abkühlen")
#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")
#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")
#define MSG_EXTRUDE _UxGT("Extrudieren")
#define MSG_RETRACT _UxGT("Retract")
#define MSG_MOVE_AXIS _UxGT("Bewegen")
#define MSG_LEVEL_BED _UxGT("Bett nivellieren")
#define MSG_MOVE_X _UxGT("X")
#define MSG_MOVE_Y _UxGT("Y")
#define MSG_MOVE_Z _UxGT("Z")
#define MSG_MOVE_E _UxGT("Extruder ")
#define MSG_MOVE_01MM _UxGT(" 0,1 mm")
#define MSG_MOVE_1MM _UxGT(" 1,0 mm")
#define MSG_MOVE_10MM _UxGT("10,0 mm")
#define MSG_SPEED _UxGT("Geschw.")
#define MSG_BED_Z _UxGT("Bett Z")
#define MSG_NOZZLE _UxGT("Düse")
#define MSG_BED _UxGT("Bett")
#define MSG_FAN_SPEED _UxGT("Lüfter")
#define MSG_FLOW _UxGT("Durchfluss")
#define MSG_CONTROL _UxGT("Einstellungen")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")
#define MSG_AUTOTEMP _UxGT("AutoTemp")
#define MSG_ON _UxGT("Ein")
#define MSG_OFF _UxGT("Aus")
#define MSG_PID_P _UxGT("PID P")
#define MSG_PID_I _UxGT("PID I")
#define MSG_PID_D _UxGT("PID D")
#define MSG_PID_C _UxGT("PID C")
#define MSG_SELECT _UxGT("Auswählen")
#define MSG_ACC _UxGT("A")
#define MSG_VX_JERK _UxGT("V X Jerk")
#define MSG_VY_JERK _UxGT("V Y Jerk")
#define MSG_VZ_JERK _UxGT("V Z Jerk")
#define MSG_VE_JERK _UxGT("V E Jerk")
#define MSG_VMAX _UxGT("V max ") // space by purpose
#define MSG_VMIN _UxGT("V min")
#define MSG_VTRAV_MIN _UxGT("V min Leerfahrt")
#define MSG_AMAX _UxGT("A max ") // space by purpose
#define MSG_A_RETRACT _UxGT("A Retract")
#define MSG_A_TRAVEL _UxGT("A Leerfahrt")
#define MSG_XSTEPS _UxGT("X Steps/mm")
#define MSG_YSTEPS _UxGT("Y Steps/mm")
#define MSG_ZSTEPS _UxGT("Z Steps/mm")
#define MSG_ESTEPS _UxGT("E Steps/mm")
#define MSG_E1STEPS _UxGT("E1 Steps/mm")
#define MSG_E2STEPS _UxGT("E2 Steps/mm")
#define MSG_E3STEPS _UxGT("E3 Steps/mm")
#define MSG_E4STEPS _UxGT("E4 Steps/mm")
2017-04-09 03:23:05 -05:00
#define MSG_E5STEPS _UxGT("E5 Steps/mm")
2016-12-12 09:18:53 -06:00
#define MSG_TEMPERATURE _UxGT("Temperatur")
#define MSG_MOTION _UxGT("Bewegung")
#define MSG_VOLUMETRIC _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
#define MSG_FILAMENT_DIAM _UxGT("D Fil.")
#define MSG_CONTRAST _UxGT("LCD Kontrast")
#define MSG_STORE_EEPROM _UxGT("EPROM speichern")
#define MSG_LOAD_EEPROM _UxGT("EPROM laden")
2016-12-12 09:18:53 -06:00
#define MSG_RESTORE_FAILSAFE _UxGT("Standardkonfiguration")
#define MSG_REFRESH _UxGT("Aktualisieren")
#define MSG_WATCH _UxGT("Info")
#define MSG_PREPARE _UxGT("Vorbereitung")
#define MSG_TUNE _UxGT("Justierung")
#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause")
#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung")
#define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch")
#define MSG_CARD_MENU _UxGT("SD-Karte")
#define MSG_NO_CARD _UxGT("Keine SD-Karte")
#define MSG_DWELL _UxGT("Warten...")
#define MSG_USERWAIT _UxGT("Warte auf Nutzer")
#define MSG_RESUMING _UxGT("Druckfortsetzung")
#define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen")
#define MSG_NO_MOVE _UxGT("Motoren eingeschaltet")
#define MSG_KILLED _UxGT("ABGEBROCHEN")
#define MSG_STOPPED _UxGT("ANGEHALTEN")
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")
2016-12-12 09:18:53 -06:00
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetract")
#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")
#define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface
#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test")
#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset")
#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("homen")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.")
#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG")
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z verboten")
#define MSG_HALTED _UxGT("DRUCKER STOPP")
#define MSG_PLEASE_RESET _UxGT("Bitte Resetten")
#define MSG_SHORT_DAY _UxGT("t") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Extr. heizt...")
#define MSG_HEATING_COMPLETE _UxGT("Extr. aufgeheizt")
#define MSG_BED_HEATING _UxGT("Bett heizt...")
#define MSG_BED_DONE _UxGT("Bett aufgeheizt")
#define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte")
#define MSG_DEBUG_MENU _UxGT("Debug Menu")
#define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittb. Test")
2016-12-12 09:18:53 -06:00
#define MSG_INFO_MENU _UxGT("Über den Drucker")
#define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info")
#define MSG_INFO_STATS_MENU _UxGT("Drucker Stat.")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
2017-01-12 09:06:58 -06:00
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren")
#define MSG_INFO_EXTRUDERS _UxGT("Extruder")
2016-12-12 09:18:53 -06:00
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protokoll")
#define MSG_LIGHTS_ON _UxGT("Gehäuse Licht an")
#define MSG_LIGHTS_OFF _UxGT("Gehäuse Licht aus")
2016-07-14 13:46:35 -05:00
2016-11-17 22:17:14 -06:00
#if LCD_WIDTH >= 20
2016-12-12 09:18:53 -06:00
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke")
#define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit")
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert")
2016-07-14 13:46:35 -05:00
#else
2016-12-12 09:18:53 -06:00
#define MSG_INFO_PRINT_COUNT _UxGT("Drucke")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett")
#define MSG_INFO_PRINT_TIME _UxGT("Gesamt ")
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
2016-07-14 13:46:35 -05:00
#endif
2016-12-12 09:18:53 -06:00
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Stromversorgung")
2016-12-12 09:18:53 -06:00
#define MSG_DRIVE_STRENGTH _UxGT("Motorströme")
#define MSG_DAC_PERCENT _UxGT("Treiber %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
2016-12-03 07:05:34 -06:00
2016-12-12 09:18:53 -06:00
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ÄNDERE FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ÄNDERE OPTIONEN:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
2016-12-12 09:18:53 -06:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")
2017-01-12 09:06:58 -06:00
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des")
2016-12-12 09:18:53 -06:00
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...")
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf.")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...")
2016-12-12 09:18:53 -06:00
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
2016-12-12 09:18:53 -06:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")
2016-12-12 09:18:53 -06:00
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_DE_H