bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
b9ed873827
Marlin_Firmware/ArduinoAddons/Arduino_1.0.x/hardware/Sanguino/boards.txt

84 lines
2.5 KiB
Plaintext
Raw Normal View History

Added libraries from Arduino 1.0.3 for sanguino build
2013-01-07 10:26:50 -06:00
############################################################
atmega644.name=Sanguino W/ ATmega644P
atmega644.upload.protocol=stk500
atmega644.upload.maximum_size=63488
atmega644.upload.speed=57600
atmega644.bootloader.low_fuses=0xFF
atmega644.bootloader.high_fuses=0x9A
atmega644.bootloader.extended_fuses=0xFF
atmega644.bootloader.path=atmega
atmega644.bootloader.file=ATmegaBOOT_168_atmega644p.hex
#atmega644.bootloader.file=ATmegaBOOT_644P.hex
atmega644.bootloader.unlock_bits=0x3F
atmega644.bootloader.lock_bits=0x0F
atmega644.build.mcu=atmega644p
atmega644.build.f_cpu=16000000L
atmega644.build.core=arduino
atmega644.build.variant=standard
##############################################################
atmega12848m.name=Sanguino W/ ATmega1284p 8mhz
atmega12848m.upload.protocol=stk500
atmega12848m.upload.maximum_size=131072
atmega12848m.upload.speed=19200
Changed 1284p fuse setting for Arduino_1.x.x - Remove the two version of 16mHz. Crystal and resonator use the same fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a board option. - Added 20Mhz board option. Symptoms for incorrect fuse setting: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-03 09:35:23 -06:00
atmega1284.bootloader.low_fuses=0xD6
atmega1284.bootloader.high_fuses=0xDA
atmega1284.bootloader.extended_fuses=0xFD
Added libraries from Arduino 1.0.3 for sanguino build
2013-01-07 10:26:50 -06:00
atmega12848m.bootloader.path=atmega
atmega12848m.bootloader.file=ATmegaBOOT_168_atmega1284p_8m.hex
atmega12848m.bootloader.unlock_bits=0x3F
atmega12848m.bootloader.lock_bits=0x0F
atmega12848m.build.mcu=atmega1284p
atmega12848m.build.f_cpu=8000000L
atmega12848m.build.core=arduino
atmega12848m.build.variant=standard
##############################################################
atmega1284.name=Sanguino W/ ATmega1284p 16mhz
atmega1284.upload.protocol=stk500
atmega1284.upload.maximum_size=131072
atmega1284.upload.speed=57600
Changed 1284p fuse setting for Arduino_1.x.x - Remove the two version of 16mHz. Crystal and resonator use the same fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a board option. - Added 20Mhz board option. Symptoms for incorrect fuse setting: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-03 09:35:23 -06:00
atmega1284.bootloader.low_fuses=0xD6
atmega1284.bootloader.high_fuses=0xDA
atmega1284.bootloader.extended_fuses=0xFD
Added libraries from Arduino 1.0.3 for sanguino build
2013-01-07 10:26:50 -06:00
atmega1284.bootloader.path=atmega
atmega1284.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
atmega1284.bootloader.unlock_bits=0x3F
atmega1284.bootloader.lock_bits=0x0F
atmega1284.build.mcu=atmega1284p
atmega1284.build.f_cpu=16000000L
atmega1284.build.core=arduino
atmega1284.build.variant=standard
Added new board for those of us with sanguinololu boards with ceramic resonators
2013-11-18 14:49:36 -06:00
##############################################################
Changed 1284p fuse setting for Arduino_1.x.x - Remove the two version of 16mHz. Crystal and resonator use the same fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a board option. - Added 20Mhz board option. Symptoms for incorrect fuse setting: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-03 09:35:23 -06:00
atmega1284m.name=Sanguino W/ ATmega1284p 20mhz
Added new board for those of us with sanguinololu boards with ceramic resonators
2013-11-18 14:49:36 -06:00
Changed 1284p fuse setting for Arduino_1.x.x - Remove the two version of 16mHz. Crystal and resonator use the same fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a board option. - Added 20Mhz board option. Symptoms for incorrect fuse setting: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-03 09:35:23 -06:00
atmega1284m.upload.protocol=stk500
atmega1284m.upload.maximum_size=131072
atmega1284m.upload.speed=57600
Added new board for those of us with sanguinololu boards with ceramic resonators
2013-11-18 14:49:36 -06:00
Changed 1284p fuse setting for Arduino_1.x.x - Remove the two version of 16mHz. Crystal and resonator use the same fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a board option. - Added 20Mhz board option. Symptoms for incorrect fuse setting: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-03 09:35:23 -06:00
atmega1284m.bootloader.low_fuses=0xD6
atmega1284m.bootloader.high_fuses=0xDA
atmega1284m.bootloader.extended_fuses=0xFD
atmega1284m.bootloader.path=atmega
atmega1284m.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
atmega1284m.bootloader.unlock_bits=0x3F
atmega1284m.bootloader.lock_bits=0x0F
Added new board for those of us with sanguinololu boards with ceramic resonators
2013-11-18 14:49:36 -06:00
Changed 1284p fuse setting for Arduino_1.x.x - Remove the two version of 16mHz. Crystal and resonator use the same fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a board option. - Added 20Mhz board option. Symptoms for incorrect fuse setting: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-03 09:35:23 -06:00
atmega1284m.build.mcu=atmega1284p
atmega1284m.build.f_cpu=20000000L
atmega1284m.build.core=arduino
atmega1284m.build.variant=standard
Added new board for those of us with sanguinololu boards with ceramic resonators
2013-11-18 14:49:36 -06:00
#
Reference in New Issue Copy Permalink