Marlin_Firmware/Marlin/pins_3DRAG.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * 3DRAG (and K8200) Arduino Mega with RAMPS v1.4 pin assignments
 */

#ifndef BOARD_NAME
  #define BOARD_NAME "3Drag"
#endif

#ifndef DEFAULT_MACHINE_NAME
  #define DEFAULT_MACHINE_NAME "3Drag"
#endif

#ifndef DEFAULT_SOURCE_CODE_URL
  #define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
#endif

#include "pins_RAMPS_14.h"

#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN       63

#undef X_MAX_PIN
#undef Y_MAX_PIN
#undef Z_MAX_PIN
#define X_MAX_PIN          2
#define Y_MAX_PIN          15
#define Z_MAX_PIN          -1

#undef SDSS
#define SDSS               25//53

#undef FAN_PIN
#define FAN_PIN            8

#undef HEATER_1_PIN
#undef HEATER_2_PIN
#undef HEATER_BED_PIN
#define HEATER_0_PIN       10
#define HEATER_1_PIN       12
#define HEATER_2_PIN       6

#define HEATER_BED_PIN     9    // BED

#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
  #undef BEEPER_PIN
  #define BEEPER_PIN -1

  #undef LCD_PINS_RS
  #undef LCD_PINS_ENABLE
  #undef LCD_PINS_D4
  #undef LCD_PINS_D5
  #undef LCD_PINS_D6
  #undef LCD_PINS_D7
  #define LCD_PINS_RS 27
  #define LCD_PINS_ENABLE 29
  #define LCD_PINS_D4 37
  #define LCD_PINS_D5 35
  #define LCD_PINS_D6 33
  #define LCD_PINS_D7 31

  // Buttons
  #undef BTN_EN1
  #undef BTN_EN2
  #undef BTN_ENC
  #define BTN_EN1 16
  #define BTN_EN2 17
  #define BTN_ENC 23 //the click

#else

  #define BEEPER_PIN 33

#endif // ULTRA_LCD && NEWPANEL
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 01:19:46 -05:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 13:01:20 -05:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`/**`
Base RAMPS-like boards on RAMPS 1.4 2016-02-29 01:13:50 -06:00			`* 3DRAG (and K8200) Arduino Mega with RAMPS v1.4 pin assignments`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`*/`

Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 04:24:29 -05:00			`#ifndef BOARD_NAME`
			`#define BOARD_NAME "3Drag"`
			`#endif`

			`#ifndef DEFAULT_MACHINE_NAME`
			`#define DEFAULT_MACHINE_NAME "3Drag"`
			`#endif`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00
Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 04:24:29 -05:00			`#ifndef DEFAULT_SOURCE_CODE_URL`
			`#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"`
			`#endif`

			`#include "pins_RAMPS_14.h"`
Move default machine info to pins files 2016-04-02 20:53:05 -05:00
Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00			`#undef Z_ENABLE_PIN`
Issue #1504 – K8200 Z_ENABLE_PIN - K8200 uses a non-standard RAMPS with Z_ENABLE=63 ?? - Assuming from previous input that 3DRAG is the same. 2015-02-15 23:56:23 -06:00			`#define Z_ENABLE_PIN 63`

Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00			`#undef X_MAX_PIN`
			`#undef Y_MAX_PIN`
			`#undef Z_MAX_PIN`
Max endstop pins disabled by configuration There’s no need to ask users to uncomment Max Endstop pins when they have them. These will be set to -1 later if the endstop option is disabled. 2015-01-25 22:08:51 -06:00			`#define X_MAX_PIN 2`
			`#define Y_MAX_PIN 15`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define Z_MAX_PIN -1`

Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00			`#undef SDSS`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define SDSS 25//53`

Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00			`#undef FAN_PIN`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define FAN_PIN 8`

Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00			`#undef HEATER_1_PIN`
			`#undef HEATER_2_PIN`
			`#undef HEATER_BED_PIN`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define HEATER_0_PIN 10`
			`#define HEATER_1_PIN 12`
			`#define HEATER_2_PIN 6`

			`#define HEATER_BED_PIN 9 // BED`

Overridable Options - Part 4 (PR#2556) Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files. 2015-07-31 00:11:19 -05:00			`#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)`
Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro. 2015-07-31 01:19:11 -05:00			`#undef BEEPER_PIN`
			`#define BEEPER_PIN -1`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00
Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00			`#undef LCD_PINS_RS`
			`#undef LCD_PINS_ENABLE`
			`#undef LCD_PINS_D4`
			`#undef LCD_PINS_D5`
			`#undef LCD_PINS_D6`
			`#undef LCD_PINS_D7`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define LCD_PINS_RS 27`
			`#define LCD_PINS_ENABLE 29`
			`#define LCD_PINS_D4 37`
			`#define LCD_PINS_D5 35`
			`#define LCD_PINS_D6 33`
			`#define LCD_PINS_D7 31`

			`// Buttons`
Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00			`#undef BTN_EN1`
			`#undef BTN_EN2`
			`#undef BTN_ENC`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define BTN_EN1 16`
			`#define BTN_EN2 17`
			`#define BTN_ENC 23 //the click`
Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00
			`#else`

Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro. 2015-07-31 01:19:11 -05:00			`#define BEEPER_PIN 33`
Fix compiler warnings - Patched up for most included configurations 2015-03-27 22:29:05 -05:00
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#endif // ULTRA_LCD && NEWPANEL`