Marlin_Firmware/Marlin/src/HAL/HAL_LPC1768/Wire.cpp

/*
  TwoWire.cpp - TWI/I2C library for Wiring & Arduino
  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*/

#ifdef TARGET_LPC1768

extern "C" {
  #include <stdlib.h>
  #include <string.h>
  #include <inttypes.h>
  #include <lpc17xx_i2c.h>
  #include <lpc17xx_pinsel.h>
  #include <lpc17xx_libcfg_default.h>
}

#include "Wire.h"

#define USEDI2CDEV_M 1

#if (USEDI2CDEV_M == 0)
  #define I2CDEV_M LPC_I2C0
#elif (USEDI2CDEV_M == 1)
  #define I2CDEV_M LPC_I2C1
#elif (USEDI2CDEV_M == 2)
  #define I2CDEV_M LPC_I2C2
#else
  #error "Master I2C device not defined!"
#endif

// Initialize Class Variables //////////////////////////////////////////////////

uint8_t TwoWire::rxBuffer[BUFFER_LENGTH];
uint8_t TwoWire::rxBufferIndex = 0;
uint8_t TwoWire::rxBufferLength = 0;

uint8_t TwoWire::txAddress = 0;
uint8_t TwoWire::txBuffer[BUFFER_LENGTH];
uint8_t TwoWire::txBufferIndex = 0;
uint8_t TwoWire::txBufferLength = 0;

uint8_t TwoWire::transmitting = 0;

// Constructors ////////////////////////////////////////////////////////////////

TwoWire::TwoWire() {
}

// Public Methods //////////////////////////////////////////////////////////////

void TwoWire::begin(void) {
  rxBufferIndex = 0;
  rxBufferLength = 0;

  txBufferIndex = 0;
  txBufferLength = 0;

  /*
   * Init I2C pin connect
   */
  PINSEL_CFG_Type PinCfg;
  PinCfg.OpenDrain = 0;
  PinCfg.Pinmode = 0;
  #if ((USEDI2CDEV_M == 0))
    PinCfg.Funcnum = 1;
    PinCfg.Pinnum = 27;
    PinCfg.Portnum = 0;
    PINSEL_ConfigPin(&PinCfg); // SDA0 / D57  AUX-1
    PinCfg.Pinnum = 28;
    PINSEL_ConfigPin(&PinCfg); // SCL0 / D58  AUX-1
  #endif
  #if ((USEDI2CDEV_M == 1))
    PinCfg.Funcnum = 3;
    PinCfg.Pinnum = 0;
    PinCfg.Portnum = 0;
    PINSEL_ConfigPin(&PinCfg);  // SDA1 / D20 SCA
    PinCfg.Pinnum = 1;
    PINSEL_ConfigPin(&PinCfg);  // SCL1 / D21 SCL
  #endif
  #if ((USEDI2CDEV_M == 2))
    PinCfg.Funcnum = 2;
    PinCfg.Pinnum = 10;
    PinCfg.Portnum = 0;
    PINSEL_ConfigPin(&PinCfg); // SDA2 / D38  X_ENABLE_PIN
    PinCfg.Pinnum = 11;
    PINSEL_ConfigPin(&PinCfg); // SCL2 / D55  X_DIR_PIN
  #endif

  // Initialize I2C peripheral
  I2C_Init(I2CDEV_M, 100000);
  
  // Enable Master I2C operation
  I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE);
}

uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity) {
  // clamp to buffer length
  if(quantity > BUFFER_LENGTH){
    quantity = BUFFER_LENGTH;
  }
  
  // perform blocking read into buffer
  I2C_M_SETUP_Type transferMCfg;
  transferMCfg.sl_addr7bit = address >> 1; // not sure about the right shift
	transferMCfg.tx_data = NULL;
	transferMCfg.tx_length = 0;
	transferMCfg.rx_data = rxBuffer;
	transferMCfg.rx_length = quantity;
	transferMCfg.retransmissions_max = 3;
	I2C_MasterTransferData(I2CDEV_M, &transferMCfg, I2C_TRANSFER_POLLING);

  // set rx buffer iterator vars
  rxBufferIndex = 0;
  rxBufferLength = transferMCfg.rx_count;

  return transferMCfg.rx_count;
}

uint8_t TwoWire::requestFrom(int address, int quantity) {
  return requestFrom((uint8_t)address, (uint8_t)quantity);
}

void TwoWire::beginTransmission(uint8_t address) {
  // indicate that we are transmitting
  transmitting = 1;
  // set address of targeted slave
  txAddress = address;
  // reset tx buffer iterator vars
  txBufferIndex = 0;
  txBufferLength = 0;
}

void TwoWire::beginTransmission(int address) {
  beginTransmission((uint8_t)address);
}

uint8_t TwoWire::endTransmission(void) {
  // transmit buffer (blocking)
  I2C_M_SETUP_Type transferMCfg;
  transferMCfg.sl_addr7bit = txAddress >> 1; // not sure about the right shift
	transferMCfg.tx_data = txBuffer;
	transferMCfg.tx_length = txBufferLength;
	transferMCfg.rx_data = NULL;
	transferMCfg.rx_length = 0;
	transferMCfg.retransmissions_max = 3;
  Status status = I2C_MasterTransferData(I2CDEV_M, &transferMCfg, I2C_TRANSFER_POLLING);
  
  // reset tx buffer iterator vars
  txBufferIndex = 0;
  txBufferLength = 0;

  // indicate that we are done transmitting
  transmitting = 0;

  if (status == SUCCESS)
    return 0; // success
  else
    return 4; // other error
}

// must be called after beginTransmission(address)
size_t TwoWire::write(uint8_t data) {
  if (transmitting) {
    // don't bother if buffer is full
    if (txBufferLength >= BUFFER_LENGTH) {
      return 0;
    }

    // put byte in tx buffer
    txBuffer[txBufferIndex] = data;
    ++txBufferIndex;

    // update amount in buffer   
    txBufferLength = txBufferIndex;
  }

  return 1;
}

// must be called after beginTransmission(address)
size_t TwoWire::write(const uint8_t *data, size_t quantity) {
  size_t sent = 0;
  if (transmitting)
    for(sent = 0; sent < quantity; ++sent)
      if (!write(data[sent]))
        break;

  return sent;
}

// must be called after requestFrom(address, numBytes)
int TwoWire::available(void) {
  return rxBufferLength - rxBufferIndex;
}

// must be called after requestFrom(address, numBytes)
int TwoWire::read(void) {
  int value = -1;
  
  // get each successive byte on each call
  if(rxBufferIndex < rxBufferLength) {
    value = rxBuffer[rxBufferIndex];
    ++rxBufferIndex;
  }

  return value;
}

// must be called after requestFrom(address, numBytes)
int TwoWire::peek(void) {
  int value = -1;
  
  if(rxBufferIndex < rxBufferLength){
    value = rxBuffer[rxBufferIndex];
  }

  return value;
}

// Preinstantiate Objects //////////////////////////////////////////////////////

TwoWire Wire = TwoWire();

#endif // TARGET_LPC1768