Marlin_Firmware/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h

327 lines
9.2 KiB
C
Raw Normal View History

2016-09-25 05:28:04 -05:00
/**
* Marlin 3D Printer Firmware
2019-02-12 15:06:53 -06:00
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2016-09-25 05:28:04 -05:00
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Mightyboard Rev.E pin assignments
* also works for Rev D boards. It's all rev E despite what the silk screen says
*/
2017-04-07 13:52:21 -05:00
/**
* Rev B 2 JAN 2017
*
* Added pin definitions for:
* M3, M4 & M5 spindle control commands
* case light
*
* Corrected pin assignment for EX2_HEAT_PIN pin. Changed it from 9 to 11. The port
2017-04-07 13:52:21 -05:00
* number (B5) agrees with the schematic but B5 is assigned to logical pin 11.
*/
2016-09-25 05:28:04 -05:00
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
2016-09-25 05:28:04 -05:00
#endif
#define DEFAULT_MACHINE_NAME "MB Replicator"
#define BOARD_NAME "Mightyboard"
//
// Servos
//
2017-06-08 18:08:03 -05:00
#define SERVO0_PIN 36 // C1 (1280-EX1)
#define SERVO1_PIN 37 // C0 (1280-EX2)
#define SERVO2_PIN 40 // G1 (1280-EX3)
#define SERVO3_PIN 41 // G0 (1280-EX4)
2016-09-25 05:28:04 -05:00
//
// Limit Switches
//
2017-06-08 18:08:03 -05:00
#define X_MIN_PIN 49 // L0
#define X_MAX_PIN 48 // L1
#define Y_MIN_PIN 47 // L2
#define Y_MAX_PIN 46 // L3
#define Z_MIN_PIN 43 // L6
#define Z_MAX_PIN 42 // L7
2016-09-25 05:28:04 -05:00
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 42
#endif
//
// Steppers
//
2017-06-08 18:08:03 -05:00
#define X_STEP_PIN 55 // F1
#define X_DIR_PIN 54 // F0
#define X_ENABLE_PIN 56 // F2
2016-09-25 05:28:04 -05:00
2017-06-08 18:08:03 -05:00
#define Y_STEP_PIN 59 // F5
#define Y_DIR_PIN 58 // F4
#define Y_ENABLE_PIN 60 // F6
2016-09-25 05:28:04 -05:00
2017-06-08 18:08:03 -05:00
#define Z_STEP_PIN 63 // K1
#define Z_DIR_PIN 62 // K0
#define Z_ENABLE_PIN 64 // K2
2016-09-25 05:28:04 -05:00
2017-06-08 18:08:03 -05:00
#define E0_STEP_PIN 25 // A3
#define E0_DIR_PIN 24 // A2
#define E0_ENABLE_PIN 26 // A4
2016-09-25 05:28:04 -05:00
2017-06-08 18:08:03 -05:00
#define E1_STEP_PIN 29 // A7
#define E1_DIR_PIN 28 // A6
#define E1_ENABLE_PIN 39 // G2
2016-09-25 05:28:04 -05:00
//
// I2C Digipots - MCP4018
// Address 5E (2F << 1)
// Set from 0 - 127 with stop bit.
// (Ex. 3F << 1 | 1)
//
2017-06-08 18:08:03 -05:00
#define DIGIPOTS_I2C_SCL 76 // J5
#define DIGIPOTS_I2C_SDA_X 57 // F3
#define DIGIPOTS_I2C_SDA_Y 61 // F7
#define DIGIPOTS_I2C_SDA_Z 65 // K3
#define DIGIPOTS_I2C_SDA_E0 27 // A5
#define DIGIPOTS_I2C_SDA_E1 77 // J6
2018-03-28 12:51:59 -05:00
#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
2016-09-25 05:28:04 -05:00
//
// Temperature Sensors
//
// K7 - 69 / ADC15 - 15
#define TEMP_BED_PIN 15
2016-09-25 05:28:04 -05:00
// SPI for Max6675 or Max31855 Thermocouple
// Uses a separate SPI bus
//
// 3 E5 DO (SO)
// 5 E3 CS1
// 2 E4 CS2
// 78 E2 SCK
//
2018-03-28 12:51:59 -05:00
#define THERMO_SCK_PIN 78 // E2
#define THERMO_DO_PIN 3 // E5
#define THERMO_CS1_PIN 5 // E3
#define THERMO_CS2_PIN 2 // E4
2018-03-28 12:51:59 -05:00
#define MAX6675_SS_PIN THERMO_CS1_PIN
#define MAX6675_SS2_PIN THERMO_CS2_PIN
2018-03-28 12:51:59 -05:00
#define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN
2016-09-25 05:28:04 -05:00
//
// Augmentation for auto-assigning plugs
//
// Two thermocouple connectors allows for either
// 2 extruders or 1 extruder and a heated bed.
// With no heated bed, an additional 24V fan is possible.
//
// Labels from the schematic:
#define EX1_HEAT_PIN 6 // H3
#define EX1_FAN_PIN 7 // H4
#define EX2_HEAT_PIN 11 // B5
#define EX2_FAN_PIN 12 // B6
#define HBP_PIN 45 // L4
#define EXTRA_FET_PIN 44 // L5
2016-09-25 05:28:04 -05:00
#if HOTENDS > 1
#if TEMP_SENSOR_BED
#define IS_EEB
#else
#define IS_EEF
#endif
#elif TEMP_SENSOR_BED
#define IS_EFB
#else
#define IS_EFF
#endif
//
// Heaters / Fans (24V)
//
#define HEATER_0_PIN EX1_HEAT_PIN
2016-09-25 05:28:04 -05:00
#if ENABLED(IS_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN HBP_PIN
2016-09-25 05:28:04 -05:00
#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN EX2_HEAT_PIN
2016-09-25 05:28:04 -05:00
#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN EX2_HEAT_PIN
#define HEATER_BED_PIN HBP_PIN
2016-09-25 05:28:04 -05:00
#elif ENABLED(IS_EFF) // Hotend, Fan, Fan
#define FAN1_PIN HBP_PIN
2016-09-25 05:28:04 -05:00
#endif
#ifndef FAN_PIN
#if EITHER(IS_EFB, IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN EX2_HEAT_PIN
#elif EITHER(IS_EEF, IS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN HBP_PIN
#else
#define FAN_PIN EXTRA_FET_PIN
#endif
2016-09-25 05:28:04 -05:00
#endif
//
// Extruder Auto Fan Pins
//
#define ORIG_E0_AUTO_FAN_PIN EX1_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN EX2_FAN_PIN
2016-09-25 05:28:04 -05:00
//
// Misc. Functions
//
2018-03-28 12:51:59 -05:00
#define LED_PIN 13 // B7
#define CUTOFF_RESET_PIN 16 // H1
#define CUTOFF_TEST_PIN 17 // H0
#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
2016-09-25 05:28:04 -05:00
//
// LCD / Controller
//
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
2018-03-28 12:51:59 -05:00
#define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2: LEFT
#define LCD_PINS_D4 35 // C2: LCD-CLK
#define LCD_PINS_D5 32 // C5: RLED
#define LCD_PINS_D6 34 // C3: LCD-DATA
#define LCD_PINS_D7 31 // C6: GLED
2018-03-28 12:51:59 -05:00
#define BTN_EN2 75 // J4, UP
#define BTN_EN1 73 // J3, DOWN
//STOP button connected as KILL_PIN
2018-03-28 12:51:59 -05:00
#define KILL_PIN 14 // J1, RIGHT
//KILL - not connected
2018-03-28 12:51:59 -05:00
#define BEEPER_PIN 8 // H5, SD_WP
2018-03-28 12:51:59 -05:00
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
//on board leds
2018-03-28 12:51:59 -05:00
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#else
// Replicator uses a 3-wire SR controller with HD44780
// For now, pretend it's the SAV
//
//#define FF_INTERFACEBOARD
2018-03-28 12:51:59 -05:00
#define SR_DATA_PIN 34 // C3
#define SR_CLK_PIN 35 // C2
#define SR_STROBE_PIN 33 // C4
2016-09-25 05:28:04 -05:00
2018-03-28 12:51:59 -05:00
#define BTN_UP 75 // J4
#define BTN_DWN 73 // J3
#define BTN_LFT 72 // J2
#define BTN_RT 14 // J1
2018-03-28 12:51:59 -05:00
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
// Disable encoder
#undef BTN_EN1
#undef BTN_EN2
#define BEEPER_PIN 4 // G5
2017-06-08 18:08:03 -05:00
#define STAT_LED_RED_PIN 32 // C5
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
#endif
2016-09-25 05:28:04 -05:00
//
// SD Card
//
2018-03-28 12:51:59 -05:00
#define SDSS 53 // B0
#define SD_DETECT_PIN 9 // H6
#define MAX_PIN THERMO_SCK_PIN
2017-04-07 13:52:21 -05:00
//
// M3/M4/M5 - Spindle/Laser Control
//
2018-03-28 12:51:59 -05:00
#define SPINDLE_LASER_ENABLE_PIN 66 // K4 Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 8 // H5 MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 67 // K5
2018-02-26 01:17:50 -06:00
// Check if all pins are defined in mega/pins_arduino.h
#include <Arduino.h>
static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h"
"to digital_pin_to_port_PGM, digital_pin_to_bit_mask_PGM, digital_pin_to_timer_PGM, NUM_DIGITAL_PINS, see below");
/* in [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h
change:
#define NUM_DIGITAL_PINS 70
to:
#define NUM_DIGITAL_PINS 80
to digital_pin_to_port_PGM add at the end:
const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
....
PG , // PG 4 ** 70 **
PG , // PG 3 ** 71 **
PJ , // PJ 2 ** 72 **
PJ , // PJ 3 ** 73 **
PJ , // PJ 7 ** 74 **
PJ , // PJ 4 ** 75 **
PJ , // PJ 5 ** 76 **
PJ , // PJ 6 ** 77 **
PE , // PE 2 ** 78 **
PE , // PE 6 ** 79 **
};
to digital_pin_to_bit_mask_PGM add at the end:
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
....
_BV( 4 ) , // PG 4 ** 70 **
_BV( 3 ) , // PG 3 ** 71 **
_BV( 2 ) , // PJ 2 ** 72 **
_BV( 3 ) , // PJ 3 ** 73 **
_BV( 7 ) , // PJ 7 ** 74 **
_BV( 4 ) , // PJ 4 ** 75 **
_BV( 5 ) , // PJ 5 ** 76 **
_BV( 6 ) , // PJ 6 ** 77 **
_BV( 2 ) , // PE 2 ** 78 **
_BV( 6 ) , // PE 6 ** 79 **
};
to digital_pin_to_timer_PGM add at the end:
const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
....
NOT_ON_TIMER , // PG 4 ** 70 **
NOT_ON_TIMER , // PG 3 ** 71 **
NOT_ON_TIMER , // PJ 2 ** 72 **
NOT_ON_TIMER , // PJ 3 ** 73 **
NOT_ON_TIMER , // PJ 7 ** 74 **
NOT_ON_TIMER , // PJ 4 ** 75 **
NOT_ON_TIMER , // PJ 5 ** 76 **
NOT_ON_TIMER , // PJ 6 ** 77 **
NOT_ON_TIMER , // PE 2 ** 78 **
NOT_ON_TIMER , // PE 6 ** 79 **
};
*/