Marlin_Firmware/Marlin/config.ini

212 lines
8.4 KiB
INI
Raw Normal View History

2022-08-04 02:38:15 -05:00
#
# Marlin Firmware
# config.ini - Options to apply before the build
#
[config:base]
ini_use_config = none
# Load all config: sections in this file
;ini_use_config = all
# Load config file relative to Marlin/
;ini_use_config = another.ini
# Download configurations from GitHub
;ini_use_config = example/Creality/Ender-5 Plus @ bugfix-2.1.x
# Download configurations from your server
;ini_use_config = https://me.myserver.com/path/to/configs
# Evaluate config:base and do a config dump
;ini_use_config = base
;config_export = 2
[config:minimal]
motherboard = BOARD_RAMPS_14_EFB
serial_port = 0
baudrate = 250000
use_watchdog = on
thermal_protection_hotends = on
thermal_protection_hysteresis = 4
thermal_protection_period = 40
bufsize = 4
block_buffer_size = 16
max_cmd_size = 96
extruders = 1
temp_sensor_0 = 1
temp_hysteresis = 3
heater_0_mintemp = 5
heater_0_maxtemp = 275
preheat_1_temp_hotend = 180
bang_max = 255
pidtemp = on
pid_k1 = 0.95
pid_max = BANG_MAX
pid_functional_range = 10
default_kp = 22.20
default_ki = 1.08
default_kd = 114.00
x_driver_type = A4988
y_driver_type = A4988
z_driver_type = A4988
e0_driver_type = A4988
x_bed_size = 200
x_min_pos = 0
x_max_pos = X_BED_SIZE
y_bed_size = 200
y_min_pos = 0
y_max_pos = Y_BED_SIZE
z_min_pos = 0
z_max_pos = 200
x_home_dir = -1
y_home_dir = -1
z_home_dir = -1
use_xmin_plug = on
use_ymin_plug = on
use_zmin_plug = on
x_min_endstop_inverting = false
y_min_endstop_inverting = false
z_min_endstop_inverting = false
default_axis_steps_per_unit = { 80, 80, 400, 500 }
axis_relative_modes = { false, false, false, false }
default_max_feedrate = { 300, 300, 5, 25 }
default_max_acceleration = { 3000, 3000, 100, 10000 }
homing_feedrate_mm_m = { (50*60), (50*60), (4*60) }
homing_bump_divisor = { 2, 2, 4 }
x_enable_on = 0
y_enable_on = 0
z_enable_on = 0
e_enable_on = 0
invert_x_dir = false
invert_y_dir = true
invert_z_dir = false
invert_e0_dir = false
invert_e_step_pin = false
invert_x_step_pin = false
invert_y_step_pin = false
invert_z_step_pin = false
disable_x = false
disable_y = false
disable_z = false
disable_e = false
proportional_font_ratio = 1.0
default_nominal_filament_dia = 1.75
junction_deviation_mm = 0.013
default_acceleration = 3000
default_travel_acceleration = 3000
default_retract_acceleration = 3000
default_minimumfeedrate = 0.0
default_mintravelfeedrate = 0.0
minimum_planner_speed = 0.05
min_steps_per_segment = 6
default_minsegmenttime = 20000
[config:basic]
bed_overshoot = 10
busy_while_heating = on
default_ejerk = 5.0
default_keepalive_interval = 2
default_leveling_fade_height = 0.0
disable_inactive_extruder = on
display_charset_hd44780 = JAPANESE
eeprom_boot_silent = on
eeprom_chitchat = on
endstoppullups = on
extrude_maxlength = 200
extrude_mintemp = 170
host_keepalive_feature = on
hotend_overshoot = 15
jd_handle_small_segments = on
lcd_info_screen_style = 0
lcd_language = en
max_bed_power = 255
mesh_inset = 0
min_software_endstops = on
max_software_endstops = on
min_software_endstop_x = on
min_software_endstop_y = on
min_software_endstop_z = on
max_software_endstop_x = on
max_software_endstop_y = on
max_software_endstop_z = on
preheat_1_fan_speed = 0
preheat_1_label = "PLA"
preheat_1_temp_bed = 70
prevent_cold_extrusion = on
prevent_lengthy_extrude = on
printjob_timer_autostart = on
probing_margin = 10
show_bootscreen = on
soft_pwm_scale = 0
string_config_h_author = "(none, default config)"
temp_bed_hysteresis = 3
temp_bed_residency_time = 10
temp_bed_window = 1
temp_residency_time = 10
temp_window = 1
validate_homing_endstops = on
xy_probe_feedrate = (133*60)
z_clearance_between_probes = 5
z_clearance_deploy_probe = 10
z_clearance_multi_probe = 5
[config:advanced]
arc_support = on
auto_report_temperatures = on
autotemp = on
autotemp_oldweight = 0.98
bed_check_interval = 5000
default_stepper_deactive_time = 120
default_volumetric_extruder_limit = 0.00
disable_inactive_e = true
disable_inactive_x = true
disable_inactive_y = true
disable_inactive_z = true
e0_auto_fan_pin = -1
encoder_100x_steps_per_sec = 80
encoder_10x_steps_per_sec = 30
encoder_rate_multiplier = on
extended_capabilities_report = on
extruder_auto_fan_speed = 255
extruder_auto_fan_temperature = 50
fanmux0_pin = -1
fanmux1_pin = -1
fanmux2_pin = -1
faster_gcode_parser = on
homing_bump_mm = { 5, 5, 2 }
max_arc_segment_mm = 1.0
min_arc_segment_mm = 0.1
min_circle_segments = 72
n_arc_correction = 25
serial_overrun_protection = on
slowdown = on
slowdown_divisor = 2
temp_sensor_bed = 0
thermal_protection_bed_hysteresis = 2
thermocouple_max_errors = 15
tx_buffer_size = 0
watch_bed_temp_increase = 2
watch_bed_temp_period = 60
watch_temp_increase = 2
watch_temp_period = 20