Marlin_Firmware/Marlin/src/pins/stm32f4/pins_LERDGE_X.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

#if !defined(STM32F4) && !defined(STM32F4xx)
  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2
  #error "LERDGE X supports up to 2 hotends / E-steppers."
#endif

#define BOARD_INFO_NAME      "Lerdge X"
#define DEFAULT_MACHINE_NAME "LERDGE"

//#define I2C_EEPROM

//
// Servos
//
//#define SERVO0_PIN         PD12
//#define SERVO1_PIN         -1

//
// Limit Switches
//
#define X_STOP_PIN         PB12
#define Y_STOP_PIN         PB13
#define Z_STOP_PIN         PB14

//
// Filament runout
//
#define FIL_RUNOUT_PIN     PE1

//
// Z Probe (when not Z_MIN_PIN)
//
//#ifndef Z_MIN_PROBE_PIN
//  #define Z_MIN_PROBE_PIN  PB15
//#endif

//
// Steppers
//
#define X_STEP_PIN         PB10
#define X_DIR_PIN          PB2
#define X_ENABLE_PIN       PB11
//#ifndef X_CS_PIN
//  #define X_CS_PIN       PD1
//#endif

#define Y_STEP_PIN         PB0
#define Y_DIR_PIN          PC5
#define Y_ENABLE_PIN       PB1
//#ifndef Y_CS_PIN
//  #define Y_CS_PIN       PE12
//#endif

#define Z_STEP_PIN         PA7
#define Z_DIR_PIN          PA6
#define Z_ENABLE_PIN       PC4
//#ifndef Z_CS_PIN
//  #define Z_CS_PIN       PD5
//#endif

#define E0_STEP_PIN        PA4
#define E0_DIR_PIN         PA3
#define E0_ENABLE_PIN      PA5
//#ifndef E0_CS_PIN
//  #define E0_CS_PIN      PB4
//#endif

#define E1_STEP_PIN        -1
#define E1_DIR_PIN         -1
#define E1_ENABLE_PIN      -1
//#ifndef E1_CS_PIN
//  #define E1_CS_PIN      PE5
//#endif

//
// Temperature Sensors
//
#define TEMP_0_PIN         PC0   // Analog Input
#define TEMP_1_PIN         -1    // Analog Input
#define TEMP_BED_PIN       PC1   // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN       PA1
#define HEATER_1_PIN       -1
#define HEATER_BED_PIN     PA2

#ifndef FAN_PIN
//  #define FAN_PIN        PC15
#endif
#define FAN1_PIN           PC15
#define FAN2_PIN           PA0

#define ORIG_E0_AUTO_FAN_PIN PC15   // Use this by NOT overriding E0_AUTO_FAN_PIN

//
// Prusa i3 MK2 Multi Material Multiplexer Support
//
//#define E_MUX0_PIN       -1
//#define E_MUX1_PIN       -1

//
// LED / Lighting
//
//#define CASE_LIGHT_PIN_CI -1
//#define CASE_LIGHT_PIN_DO -1
//#define NEOPIXEL_PIN     -1

//
// Misc. Functions
//
#define SDSS               PC11
#define LED_PIN            PC7   // Alive
#define PS_ON_PIN          -1
#define KILL_PIN           -1
#define POWER_LOSS_PIN     -1    // Power-loss / nAC_FAULT

#define SCK_PIN            PC12
#define MISO_PIN           PC8
#define MOSI_PIN           PD2
#define SS_PIN             PC11

//
// SD support
//
#define SDIO_SUPPORT

//
// LCD / Controller
//

// The LCD is initialized in FSMC mode
#define SD_DETECT_PIN      -1
#define BEEPER_PIN         PD12

#define BTN_EN1            PE3
#define BTN_EN2            PE4
#define BTN_ENC            PE2

#define LCD_RESET_PIN      PD6
#define LCD_BACKLIGHT_PIN  PD3
#define FSMC_CS_PIN        PD4
#define FSMC_RS_PIN        PD11
#define TOUCH_CS           PB6

//
// ST7920 Delays
//
#if HAS_GRAPHICAL_LCD
  #define BOARD_ST7920_DELAY_1 DELAY_NS(96)
  #define BOARD_ST7920_DELAY_2 DELAY_NS(48)
  #define BOARD_ST7920_DELAY_3 DELAY_NS(715)
#endif