Marlin_Firmware/Marlin/pins_GEN7_CUSTOM.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Gen7 Alfons3 board pin assignments
 *
 * These Pins are assigned for the modified GEN7 Board from Alfons3.
 * Please review the pins and adjust them for your needs.
 */

#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
  #error "Oops!  Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
#endif

#define BOARD_NAME      "Gen7 Custom"

//
// Limit Switches
//
#define X_STOP_PIN       0
#define Y_STOP_PIN       1
#define Z_STOP_PIN       2

//
// Steppers
//
#define X_STEP_PIN      21   // different from standard GEN7
#define X_DIR_PIN       20   // different from standard GEN7
#define X_ENABLE_PIN    24

#define Y_STEP_PIN      23
#define Y_DIR_PIN       22
#define Y_ENABLE_PIN    24

#define Z_STEP_PIN      26
#define Z_DIR_PIN       25
#define Z_ENABLE_PIN    24

#define E0_STEP_PIN     28
#define E0_DIR_PIN      27
#define E0_ENABLE_PIN   24

//
// Temperature Sensors
//
#define TEMP_0_PIN       2   // Analog Input
#define TEMP_BED_PIN     1   // Analog Input (pin 34 bed)

//
// Heaters
//
#define HEATER_0_PIN     4
#define HEATER_BED_PIN   3  // (bed)

//
// Misc. Functions
//
#define SDSS            31  // SCL pin of I2C header || CS Pin for SD Card support
#define PS_ON_PIN       19

// A pin for debugging
#define DEBUG_PIN       -1

//
// LCD / Controller
//
#define BEEPER_PIN      -1

// 4bit LCD Support
#define LCD_PINS_RS     18
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4     16
#define LCD_PINS_D5     15
#define LCD_PINS_D6     13
#define LCD_PINS_D7     14

// Buttons are directly attached
#define BTN_EN1         11
#define BTN_EN2         10
#define BTN_ENC         12

// RS485 pins
//#define TX_ENABLE_PIN   12
//#define RX_ENABLE_PIN   13
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 01:19:46 -05:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 13:01:20 -05:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`/**`
			`* Gen7 Alfons3 board pin assignments`
			`*`
			`* These Pins are assigned for the modified GEN7 Board from Alfons3.`
			`* Please review the pins and adjust them for your needs.`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 01:08:58 -05:00			`*/`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00
			`#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)`
Enclose all #error strings with apostrophes 2016-05-13 07:10:23 -05:00			`#error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#endif`

Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 04:24:29 -05:00			`#define BOARD_NAME "Gen7 Custom"`

Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`//`
			`// Limit Switches`
			`//`
Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro. 2015-07-31 01:19:11 -05:00			`#define X_STOP_PIN 0`
Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`#define Y_STOP_PIN 1`
			`#define Z_STOP_PIN 2`

			`//`
			`// Steppers`
			`//`
			`#define X_STEP_PIN 21 // different from standard GEN7`
			`#define X_DIR_PIN 20 // different from standard GEN7`
			`#define X_ENABLE_PIN 24`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00
			`#define Y_STEP_PIN 23`
			`#define Y_DIR_PIN 22`
			`#define Y_ENABLE_PIN 24`

			`#define Z_STEP_PIN 26`
			`#define Z_DIR_PIN 25`
			`#define Z_ENABLE_PIN 24`

			`#define E0_STEP_PIN 28`
			`#define E0_DIR_PIN 27`
			`#define E0_ENABLE_PIN 24`

Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`//`
			`// Temperature Sensors`
			`//`
			`#define TEMP_0_PIN 2 // Analog Input`
			`#define TEMP_BED_PIN 1 // Analog Input (pin 34 bed)`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00
Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`//`
			`// Heaters`
			`//`
Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro. 2015-07-31 01:19:11 -05:00			`#define HEATER_0_PIN 4`
			`#define HEATER_BED_PIN 3 // (bed)`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00
Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 15:27:04 -05:00			`//`
			`// Misc. Functions`
			`//`
			`#define SDSS 31 // SCL pin of I2C header \|\| CS Pin for SD Card support`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define PS_ON_PIN 19`

Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`// A pin for debugging`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define DEBUG_PIN -1`

Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 15:27:04 -05:00			`//`
			`// LCD / Controller`
			`//`
Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`#define BEEPER_PIN -1`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00
Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`// 4bit LCD Support`
			`#define LCD_PINS_RS 18`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-25 20:40:00 -06:00			`#define LCD_PINS_ENABLE 17`
Label analog pins in a similar way Some other pins formatting also 2016-10-05 01:52:43 -05:00			`#define LCD_PINS_D4 16`
			`#define LCD_PINS_D5 15`
			`#define LCD_PINS_D6 13`
			`#define LCD_PINS_D7 14`

			`// Buttons are directly attached`
			`#define BTN_EN1 11`
			`#define BTN_EN2 10`
			`#define BTN_ENC 12`

			`// RS485 pins`
			`//#define TX_ENABLE_PIN 12`
			`//#define RX_ENABLE_PIN 13`