Marlin_Firmware/Marlin/language_pl.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Polish
 *
 * LCD Menu Messages
 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
 *
 */
#ifndef LANGUAGE_PL_H
#define LANGUAGE_PL_H

// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1

#define WELCOME_MSG                         MACHINE_NAME " gotowy."
#define MSG_SD_INSERTED                     "Karta wlozona"
#define MSG_SD_REMOVED                      "Karta usunieta"
#define MSG_LCD_ENDSTOPS                    "Krancow." // Max length 8 characters
#define MSG_MAIN                            "Menu glowne"
#define MSG_AUTOSTART                       "Autostart"
#define MSG_DISABLE_STEPPERS                "Wylacz silniki"
#define MSG_AUTO_HOME                       "Auto. poz. zerowa"
#define MSG_LEVEL_BED_HOMING                "Pozycja zerowa"
#define MSG_LEVEL_BED_WAITING               "Kliknij by rozp."
#define MSG_LEVEL_BED_NEXT_POINT            "Nastepny punkt"
#define MSG_LEVEL_BED_DONE                  "Wypoziomowano!"
#define MSG_LEVEL_BED_CANCEL                "Anuluj"
#define MSG_SET_HOME_OFFSETS                "Ust. poz. zer."
#define MSG_HOME_OFFSETS_APPLIED            "Poz. zerowa ust."
#define MSG_SET_ORIGIN                      "Ustaw punkt zero"
#define MSG_PREHEAT_1                       "Rozgrzej PLA"
#define MSG_PREHEAT_1_N                     "Rozgrzej PLA "
#define MSG_PREHEAT_1_ALL                   "Roz. PLA Wszystko"
#define MSG_PREHEAT_1_BEDONLY               "Rozgrzej PLA Loze"
#define MSG_PREHEAT_1_SETTINGS              "Ustaw. rozg. PLA"
#define MSG_PREHEAT_2                       "Rozgrzej ABS"
#define MSG_PREHEAT_2_N                     "Rozgrzej ABS "
#define MSG_PREHEAT_2_ALL                   "Roz. ABS Wszystko"
#define MSG_PREHEAT_2_BEDONLY               "Rozgrzej ABS Loze"
#define MSG_PREHEAT_2_SETTINGS              "Ustaw. rozg. ABS"
#define MSG_H1                              "1"
#define MSG_H2                              "2"
#define MSG_H3                              "3"
#define MSG_H4                              "4"
#define MSG_COOLDOWN                        "Chlodzenie"
#define MSG_SWITCH_PS_ON                    "Wlacz zasilacz"
#define MSG_SWITCH_PS_OFF                   "Wylacz zasilacz"
#define MSG_EXTRUDE                         "Ekstruzja"
#define MSG_RETRACT                         "Wycofanie"
#define MSG_MOVE_AXIS                       "Ruch osi"
#define MSG_LEVEL_BED                       "Poziom. loza"
#define MSG_MOVE_X                          "Przesun w X"
#define MSG_MOVE_Y                          "Przesun w Y"
#define MSG_MOVE_Z                          "Przesun w Z"
#define MSG_MOVE_E                          "Ekstruzja (os E)"
#define MSG_MOVE_E1                         "1"
#define MSG_MOVE_E2                         "2"
#define MSG_MOVE_E3                         "3"
#define MSG_MOVE_E4                         "4"
#define MSG_MOVE_01MM                       "Przesuwaj co .1mm"
#define MSG_MOVE_1MM                        "Przesuwaj co 1mm"
#define MSG_MOVE_10MM                       "Przesuwaj co 10mm"
#define MSG_SPEED                           "Predkosc"
#define MSG_BED_Z                           "Loze Z"
#define MSG_NOZZLE                          "Dysza"
#define MSG_N1                              " 1"
#define MSG_N2                              " 2"
#define MSG_N3                              " 3"
#define MSG_N4                              " 4"
#define MSG_BED                             "Loze"
#define MSG_FAN_SPEED                       "Obroty wiatraka"
#define MSG_FLOW                            "Przeplyw"
#define MSG_CONTROL                         "Ustawienia"
#define MSG_MIN                             LCD_STR_THERMOMETER " Min"
#define MSG_MAX                             LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR                          LCD_STR_THERMOMETER " Mnoznik"
#define MSG_AUTOTEMP                        "Auto. temperatura"
#define MSG_ON                              "Wl. "
#define MSG_OFF                             "Wyl."
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_PID_C                           "PID-C"
#define MSG_E1                              " E1"
#define MSG_E2                              " E2"
#define MSG_E3                              " E3"
#define MSG_E4                              " E4"
#define MSG_ACC                             "Przyspieszenie"
#define MSG_VXY_JERK                        "Zryw Vxy"
#define MSG_VZ_JERK                         "Zryw Vz"
#define MSG_VE_JERK                         "Zryw Ve"
#define MSG_VMAX                            "Vmax "
#define MSG_X                               "X"
#define MSG_Y                               "Y"
#define MSG_Z                               "Z"
#define MSG_E                               "E"
#define MSG_VMIN                            "Vmin"
#define MSG_VTRAV_MIN                       "Vskok min"
#define MSG_AMAX                            "Amax"
#define MSG_A_RETRACT                       "A-wycofanie"
#define MSG_A_TRAVEL                        "A-przesun."
#define MSG_XSTEPS                          "krokiX/mm"
#define MSG_YSTEPS                          "krokiY/mm"
#define MSG_ZSTEPS                          "krokiZ/mm"
#define MSG_ESTEPS                          "krokiE/mm"
#define MSG_TEMPERATURE                     "Temperatura"
#define MSG_MOTION                          "Ruch"
#define MSG_VOLUMETRIC                      "Filament"
#define MSG_VOLUMETRIC_ENABLED              "E w mm3"
#define MSG_FILAMENT_DIAM                   "Śr. fil."
#define MSG_DIAM_E1                         " 1"
#define MSG_DIAM_E2                         " 2"
#define MSG_DIAM_E3                         " 3"
#define MSG_DIAM_E4                         " 4"
#define MSG_CONTRAST                        "Kontrast LCD"
#define MSG_STORE_EPROM                     "Zapisz w pamieci"
#define MSG_LOAD_EPROM                      "Wczytaj z pamieci"
#define MSG_RESTORE_FAILSAFE                "Ustaw. fabryczne"
#define MSG_REFRESH                         "Odswiez"
#define MSG_WATCH                           "Ekran glowny"
#define MSG_PREPARE                         "Przygotuj"
#define MSG_TUNE                            "Strojenie"
#define MSG_PAUSE_PRINT                     "Pauza"
#define MSG_RESUME_PRINT                    "Wznowienie"
#define MSG_STOP_PRINT                      "Stop"
#define MSG_CARD_MENU                       "Menu karty SD"
#define MSG_NO_CARD                         "Brak karty"
#define MSG_DWELL                           "Uspij..."
#define MSG_USERWAIT                        "Oczekiwanie..."
#define MSG_RESUMING                        "Wznawianie druku"
#define MSG_PRINT_ABORTED                   "Druk przerwany"
#define MSG_NO_MOVE                         "Brak ruchu"
#define MSG_KILLED                          "Ubity. "
#define MSG_STOPPED                         "Zatrzymany. "
#define MSG_CONTROL_RETRACT                 "Wycofaj mm"
#define MSG_CONTROL_RETRACT_SWAP            "Z Wycof. mm"
#define MSG_CONTROL_RETRACTF                "Wycofaj  V"
#define MSG_CONTROL_RETRACT_ZLIFT           "Skok Z mm"
#define MSG_CONTROL_RETRACT_RECOVER         "Cof. wycof. +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Z Cof. wyc. +mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "Cof. wycof.  V"
#define MSG_AUTORETRACT                     "Auto. wycofanie"
#define MSG_FILAMENTCHANGE                  "Zmien filament"
#define MSG_INIT_SDCARD                     "Inicjal. karty SD"
#define MSG_CNG_SDCARD                      "Zmiana karty SD"
#define MSG_ZPROBE_OUT                      "Sonda Z za lozem"
#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST                           "first"
#define MSG_ZPROBE_ZOFFSET                  "Offset Z"
#define MSG_BABYSTEP_X                      "Babystep X"
#define MSG_BABYSTEP_Y                      "Babystep Y"
#define MSG_BABYSTEP_Z                      "Babystep Z"
#define MSG_ENDSTOP_ABORT                   "Blad krancowki"
#define MSG_HEATING_FAILED_LCD              "Rozgrz. nieudane"
#define MSG_ERR_REDUNDANT_TEMP              "Błąd temperatury"
#define MSG_THERMAL_RUNAWAY                 "Zanik temp."
#define MSG_ERR_MAXTEMP                     "Err: max. temp."
#define MSG_ERR_MINTEMP                     "Err: min. temp."
#define MSG_ERR_MAXTEMP_BED                 "Err: max. temp. loza"
#define MSG_ERR_MINTEMP_BED                 "Err: min. temp. loza"
#define MSG_END_HOUR                        "godzin"
#define MSG_END_MINUTE                      "minut"
#define MSG_HEATING                         "Rozgrzewanie..."
#define MSG_HEATING_COMPLETE                "Rozgrzano"
#define MSG_BED_HEATING                     "Rozgrzewanie loza..."
#define MSG_BED_DONE                        "Rozgrzano loze"
#define MSG_DELTA_CALIBRATE                 "Kalibrowanie Delty"
#define MSG_DELTA_CALIBRATE_X               "Kalibruj X"
#define MSG_DELTA_CALIBRATE_Y               "Kalibruj Y"
#define MSG_DELTA_CALIBRATE_Z               "Kalibruj Z"
#define MSG_DELTA_CALIBRATE_CENTER          "Kalibruj środek"

#endif // LANGUAGE_PL_H
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 01:19:46 -05:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 13:01:20 -05:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`/**`
			`* Polish`
			`*`
			`* LCD Menu Messages`
Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757d7986a2744136331415fbbb17758c0, but http://www.marlinfirmware.org/ isn't working. 2016-03-22 05:58:41 -05:00			`* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`*`
			`*/`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 11:31:19 -06:00			`#ifndef LANGUAGE_PL_H`
			`#define LANGUAGE_PL_H`

Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe 2015-03-13 08:26:58 -05:00			`// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h`
			`//#define SIMULATE_ROMFONT`
			`#define DISPLAY_CHARSET_ISO10646_1`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define WELCOME_MSG MACHINE_NAME " gotowy."`
			`#define MSG_SD_INSERTED "Karta wlozona"`
			`#define MSG_SD_REMOVED "Karta usunieta"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_LCD_ENDSTOPS "Krancow." // Max length 8 characters`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_MAIN "Menu glowne"`
			`#define MSG_AUTOSTART "Autostart"`
			`#define MSG_DISABLE_STEPPERS "Wylacz silniki"`
			`#define MSG_AUTO_HOME "Auto. poz. zerowa"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_LEVEL_BED_HOMING "Pozycja zerowa"`
			`#define MSG_LEVEL_BED_WAITING "Kliknij by rozp."`
			`#define MSG_LEVEL_BED_NEXT_POINT "Nastepny punkt"`
			`#define MSG_LEVEL_BED_DONE "Wypoziomowano!"`
			`#define MSG_LEVEL_BED_CANCEL "Anuluj"`
			`#define MSG_SET_HOME_OFFSETS "Ust. poz. zer."`
			`#define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust."`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_SET_ORIGIN "Ustaw punkt zero"`
Replace PLA/ABS preheating with generic 2016-07-09 17:20:12 -05:00			`#define MSG_PREHEAT_1 "Rozgrzej PLA"`
			`#define MSG_PREHEAT_1_N "Rozgrzej PLA "`
			`#define MSG_PREHEAT_1_ALL "Roz. PLA Wszystko"`
			`#define MSG_PREHEAT_1_BEDONLY "Rozgrzej PLA Loze"`
			`#define MSG_PREHEAT_1_SETTINGS "Ustaw. rozg. PLA"`
			`#define MSG_PREHEAT_2 "Rozgrzej ABS"`
			`#define MSG_PREHEAT_2_N "Rozgrzej ABS "`
			`#define MSG_PREHEAT_2_ALL "Roz. ABS Wszystko"`
			`#define MSG_PREHEAT_2_BEDONLY "Rozgrzej ABS Loze"`
			`#define MSG_PREHEAT_2_SETTINGS "Ustaw. rozg. ABS"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_H1 "1"`
			`#define MSG_H2 "2"`
			`#define MSG_H3 "3"`
			`#define MSG_H4 "4"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_COOLDOWN "Chlodzenie"`
			`#define MSG_SWITCH_PS_ON "Wlacz zasilacz"`
			`#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"`
			`#define MSG_EXTRUDE "Ekstruzja"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_RETRACT "Wycofanie"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_MOVE_AXIS "Ruch osi"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_LEVEL_BED "Poziom. loza"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_MOVE_X "Przesun w X"`
			`#define MSG_MOVE_Y "Przesun w Y"`
			`#define MSG_MOVE_Z "Przesun w Z"`
			`#define MSG_MOVE_E "Ekstruzja (os E)"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_MOVE_E1 "1"`
			`#define MSG_MOVE_E2 "2"`
			`#define MSG_MOVE_E3 "3"`
			`#define MSG_MOVE_E4 "4"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_MOVE_01MM "Przesuwaj co .1mm"`
			`#define MSG_MOVE_1MM "Przesuwaj co 1mm"`
			`#define MSG_MOVE_10MM "Przesuwaj co 10mm"`
			`#define MSG_SPEED "Predkosc"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_BED_Z "Loze Z"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_NOZZLE "Dysza"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_N1 " 1"`
			`#define MSG_N2 " 2"`
			`#define MSG_N3 " 3"`
			`#define MSG_N4 " 4"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_BED "Loze"`
			`#define MSG_FAN_SPEED "Obroty wiatraka"`
			`#define MSG_FLOW "Przeplyw"`
			`#define MSG_CONTROL "Ustawienia"`
Introduce - clean - prepae language files 2015-03-10 11:46:25 -05:00			`#define MSG_MIN LCD_STR_THERMOMETER " Min"`
			`#define MSG_MAX LCD_STR_THERMOMETER " Max"`
			`#define MSG_FACTOR LCD_STR_THERMOMETER " Mnoznik"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_AUTOTEMP "Auto. temperatura"`
			`#define MSG_ON "Wl. "`
			`#define MSG_OFF "Wyl."`
			`#define MSG_PID_P "PID-P"`
			`#define MSG_PID_I "PID-I"`
			`#define MSG_PID_D "PID-D"`
			`#define MSG_PID_C "PID-C"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_E1 " E1"`
			`#define MSG_E2 " E2"`
			`#define MSG_E3 " E3"`
			`#define MSG_E4 " E4"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_ACC "Przyspieszenie"`
			`#define MSG_VXY_JERK "Zryw Vxy"`
			`#define MSG_VZ_JERK "Zryw Vz"`
			`#define MSG_VE_JERK "Zryw Ve"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_VMAX "Vmax "`
Uppercase XYZE on Graphical LCD 2016-04-18 15:42:11 -05:00			`#define MSG_X "X"`
			`#define MSG_Y "Y"`
			`#define MSG_Z "Z"`
			`#define MSG_E "E"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_VMIN "Vmin"`
			`#define MSG_VTRAV_MIN "Vskok min"`
			`#define MSG_AMAX "Amax"`
			`#define MSG_A_RETRACT "A-wycofanie"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_A_TRAVEL "A-przesun."`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_XSTEPS "krokiX/mm"`
			`#define MSG_YSTEPS "krokiY/mm"`
			`#define MSG_ZSTEPS "krokiZ/mm"`
			`#define MSG_ESTEPS "krokiE/mm"`
			`#define MSG_TEMPERATURE "Temperatura"`
			`#define MSG_MOTION "Ruch"`
Add English defines for filament menu to non-English to prevent compile errors until translated 2015-01-03 16:28:05 -06:00			`#define MSG_VOLUMETRIC "Filament"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_VOLUMETRIC_ENABLED "E w mm3"`
			`#define MSG_FILAMENT_DIAM "Śr. fil."`
			`#define MSG_DIAM_E1 " 1"`
			`#define MSG_DIAM_E2 " 2"`
			`#define MSG_DIAM_E3 " 3"`
			`#define MSG_DIAM_E4 " 4"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_CONTRAST "Kontrast LCD"`
			`#define MSG_STORE_EPROM "Zapisz w pamieci"`
			`#define MSG_LOAD_EPROM "Wczytaj z pamieci"`
			`#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_REFRESH "Odswiez"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_WATCH "Ekran glowny"`
			`#define MSG_PREPARE "Przygotuj"`
			`#define MSG_TUNE "Strojenie"`
			`#define MSG_PAUSE_PRINT "Pauza"`
			`#define MSG_RESUME_PRINT "Wznowienie"`
			`#define MSG_STOP_PRINT "Stop"`
			`#define MSG_CARD_MENU "Menu karty SD"`
			`#define MSG_NO_CARD "Brak karty"`
			`#define MSG_DWELL "Uspij..."`
			`#define MSG_USERWAIT "Oczekiwanie..."`
			`#define MSG_RESUMING "Wznawianie druku"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_PRINT_ABORTED "Druk przerwany"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_NO_MOVE "Brak ruchu"`
			`#define MSG_KILLED "Ubity. "`
			`#define MSG_STOPPED "Zatrzymany. "`
			`#define MSG_CONTROL_RETRACT "Wycofaj mm"`
			`#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"`
			`#define MSG_CONTROL_RETRACTF "Wycofaj V"`
Remove language strings that only add a number This won’t reduce the string storage in the end, but it makes the language files smaller. Also removed remaining unused strings. 2015-01-27 23:36:58 -06:00			`#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"`
			`#define MSG_AUTORETRACT "Auto. wycofanie"`
			`#define MSG_FILAMENTCHANGE "Zmien filament"`
			`#define MSG_INIT_SDCARD "Inicjal. karty SD"`
			`#define MSG_CNG_SDCARD "Zmiana karty SD"`
			`#define MSG_ZPROBE_OUT "Sonda Z za lozem"`
universalize axis_unhomed_error() 2016-06-27 17:46:40 -05:00			`#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST`
			`#define MSG_FIRST "first"`
Clean up, move unused to the bottom, add headings 2014-12-18 12:33:00 -06:00			`#define MSG_ZPROBE_ZOFFSET "Offset Z"`
			`#define MSG_BABYSTEP_X "Babystep X"`
			`#define MSG_BABYSTEP_Y "Babystep Y"`
			`#define MSG_BABYSTEP_Z "Babystep Z"`
Update language_pl.h 2016-05-20 06:24:34 -05:00			`#define MSG_ENDSTOP_ABORT "Blad krancowki"`
			`#define MSG_HEATING_FAILED_LCD "Rozgrz. nieudane"`
			`#define MSG_ERR_REDUNDANT_TEMP "Błąd temperatury"`
			`#define MSG_THERMAL_RUNAWAY "Zanik temp."`
			`#define MSG_ERR_MAXTEMP "Err: max. temp."`
			`#define MSG_ERR_MINTEMP "Err: min. temp."`
			`#define MSG_ERR_MAXTEMP_BED "Err: max. temp. loza"`
			`#define MSG_ERR_MINTEMP_BED "Err: min. temp. loza"`
			`#define MSG_END_HOUR "godzin"`
			`#define MSG_END_MINUTE "minut"`
			`#define MSG_HEATING "Rozgrzewanie..."`
			`#define MSG_HEATING_COMPLETE "Rozgrzano"`
			`#define MSG_BED_HEATING "Rozgrzewanie loza..."`
			`#define MSG_BED_DONE "Rozgrzano loze"`
Tab to Space 2016-07-01 17:53:38 -05:00			`#define MSG_DELTA_CALIBRATE "Kalibrowanie Delty"`
			`#define MSG_DELTA_CALIBRATE_X "Kalibruj X"`
			`#define MSG_DELTA_CALIBRATE_Y "Kalibruj Y"`
			`#define MSG_DELTA_CALIBRATE_Z "Kalibruj Z"`
			`#define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek"`
Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h 2014-12-29 11:13:00 -06:00
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 11:31:19 -06:00			`#endif // LANGUAGE_PL_H`