Marlin_Firmware/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/************************************************
 * Rambo pin assignments MODIFIED FOR Scoovo X9H
 ************************************************/

#ifndef __AVR_ATmega2560__
  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif

#define BOARD_INFO_NAME "Scoovo X9H"

//
// Servos
//
#define SERVO0_PIN         22   // Motor header MX1
#define SERVO1_PIN         23   // Motor header MX2
#define SERVO2_PIN         24   // Motor header MX3
#define SERVO3_PIN          5   // PWM header pin 5

//
// Limit Switches
//
#define X_MIN_PIN          12
#define X_MAX_PIN          24
#define Y_MIN_PIN          11
#define Y_MAX_PIN          23
#define Z_MIN_PIN          10
#define Z_MAX_PIN          30

//
// Z Probe (when not Z_MIN_IN)
//
#ifndef Z_MIN_PROBE_PIN
  #define Z_MIN_PROBE_PIN  30
#endif

//
// Steppers
//
#define X_STEP_PIN         37
#define X_DIR_PIN          48
#define X_ENABLE_PIN       29

#define Y_STEP_PIN         36
#define Y_DIR_PIN          49
#define Y_ENABLE_PIN       28

#define Z_STEP_PIN         35
#define Z_DIR_PIN          47
#define Z_ENABLE_PIN       27

#define E0_STEP_PIN        34
#define E0_DIR_PIN         43
#define E0_ENABLE_PIN      26

#define E1_STEP_PIN        33
#define E1_DIR_PIN         42
#define E1_ENABLE_PIN      25

// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN          40
#define X_MS2_PIN          41
#define Y_MS1_PIN          69
#define Y_MS2_PIN          39
#define Z_MS1_PIN          68
#define Z_MS2_PIN          67
#define E0_MS1_PIN         65
#define E0_MS2_PIN         66
#define E1_MS1_PIN         63
#define E1_MS2_PIN         64

#define DIGIPOTSS_PIN      38
#define DIGIPOT_CHANNELS {4,5,3,0,1}   // X Y Z E0 E1 digipot channels to stepper driver mapping

//
// Temperature Sensors
//
#define TEMP_0_PIN          0   // Analog Input
#define TEMP_BED_PIN        7   // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN        9
#define HEATER_1_PIN        7
#define HEATER_BED_PIN      3

#ifndef FAN_PIN
  #define FAN_PIN           8
#endif
#define FAN1_PIN            6
#define FAN2_PIN            2

//
// Misc. Functions
//
#define SDSS               53
#define LED_PIN            13
#define PS_ON_PIN           4

#ifndef FILWIDTH_PIN
  #define FILWIDTH_PIN      3   // Analog Input
#endif

//
// LCD / Controller
//
#define LCD_PINS_RS        70   // Ext2_5
#define LCD_PINS_ENABLE    71   // Ext2_7
#define LCD_PINS_D4        72   // Ext2_9 ?
#define LCD_PINS_D5        73   // Ext2_11 ?
#define LCD_PINS_D6        74   // Ext2_13
#define LCD_PINS_D7        75   // Ext2_15 ?
#define BEEPER_PIN         -1

#define BTN_HOME           80   // Ext_16
#define BTN_CENTER         81   // Ext_14
#define BTN_ENC            BTN_CENTER
#define BTN_RIGHT          82   // Ext_12
#define BTN_LEFT           83   // Ext_10
#define BTN_UP             84   // Ext2_8
#define BTN_DOWN           85   // Ext2_6

#define HOME_PIN           BTN_HOME

#if ANY(VIKI2, miniVIKI)
  #define BEEPER_PIN       44
  // Pins for DOGM SPI LCD Support
  #define DOGLCD_A0        70
  #define DOGLCD_CS        71
  #define LCD_SCREEN_ROT_180

  #define SD_DETECT_PIN    -1   // Pin 72 if using easy adapter board

  #define STAT_LED_RED_PIN  22
  #define STAT_LED_BLUE_PIN 32
#endif // VIKI2/miniVIKI