Marlin_Firmware/Marlin/src/HAL/STM32_F4_F7/eeprom_emul.h

/******************************************************************************
 * @file    eeprom_emul.h
 * @author  MCD Application Team
 * @version V1.2.6
 * @date    04-November-2016
 * @brief   This file contains all the functions prototypes for the EEPROM
 *          emulation firmware library.
 ******************************************************************************
 * @attention
 *
 * Copyright © 2016 STMicroelectronics International N.V.
 * All rights reserved.</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted, provided that the following conditions are met:
 *
 * 1. Redistribution of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. Neither the name of STMicroelectronics nor the names of other
 *    contributors to this software may be used to endorse or promote products
 *    derived from this software without specific written permission.
 * 4. This software, including modifications and/or derivative works of this
 *    software, must execute solely and exclusively on microcontroller or
 *    microprocessor devices manufactured by or for STMicroelectronics.
 * 5. Redistribution and use of this software other than as permitted under
 *    this license is void and will automatically terminate your rights under
 *    this license.
 *
 * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
 * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
 * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
 * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************/
#pragma once

// ------------------------
// Includes
// ------------------------

#include "../../inc/MarlinConfig.h"
#include "HAL.h"

/* Exported constants --------------------------------------------------------*/
/* EEPROM emulation firmware error codes */
#define EE_OK      uint32_t(HAL_OK)
#define EE_ERROR   uint32_t(HAL_ERROR)
#define EE_BUSY    uint32_t(HAL_BUSY)
#define EE_TIMEOUT uint32_t(HAL_TIMEOUT)

/* Define the size of the sectors to be used */
#define PAGE_SIZE             uint32_t(0x4000)  /* Page size = 16KByte */

/* Device voltage range supposed to be [2.7V to 3.6V], the operation will
   be done by word  */
#define VOLTAGE_RANGE         uint8_t(VOLTAGE_RANGE_3)

/* EEPROM start address in Flash */
#ifdef STM32F7
  #define EEPROM_START_ADDRESS  uint32_t(0x08100000) /* EEPROM emulation start address:
                                                        from sector2 : after 16KByte of used
                                                        Flash memory */
#else
  #define EEPROM_START_ADDRESS  uint32_t(0x08078000) /* EEPROM emulation start address:
                                                        after 480KByte of used Flash memory */
#endif

/* Pages 0 and 1 base and end addresses */
#define PAGE0_BASE_ADDRESS    uint32_t(EEPROM_START_ADDRESS + 0x0000)
#define PAGE0_END_ADDRESS     uint32_t(EEPROM_START_ADDRESS + PAGE_SIZE - 1)
#define PAGE0_ID              FLASH_SECTOR_1

#define PAGE1_BASE_ADDRESS    uint32_t(EEPROM_START_ADDRESS + 0x4000)
#define PAGE1_END_ADDRESS     uint32_t(EEPROM_START_ADDRESS + 2 * (PAGE_SIZE) - 1)
#define PAGE1_ID              FLASH_SECTOR_2

/* Used Flash pages for EEPROM emulation */
#define PAGE0                 uint16_t(0x0000)
#define PAGE1                 uint16_t(0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/

/* No valid page define */
#define NO_VALID_PAGE         uint16_t(0x00AB)

/* Page status definitions */
#define ERASED                uint16_t(0xFFFF)     /* Page is empty */
#define RECEIVE_DATA          uint16_t(0xEEEE)     /* Page is marked to receive data */
#define VALID_PAGE            uint16_t(0x0000)     /* Page containing valid data */

/* Valid pages in read and write defines */
#define READ_FROM_VALID_PAGE  uint8_t(0x00)
#define WRITE_IN_VALID_PAGE   uint8_t(0x01)

/* Page full define */
#define PAGE_FULL             uint8_t(0x80)

/* Variables' number */
#define NB_OF_VAR             uint16_t(4096)

/* Exported functions ------------------------------------------------------- */
uint16_t EE_Initialize();
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data);
uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data);

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/