Marlin_Firmware/Marlin/src/pins/pins_DUE3DOM_MINI.h

161 lines
3.9 KiB
C
Raw Normal View History

2017-07-18 18:29:06 -05:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* DUE3DOM MINI pin assignments
*/
#ifndef __SAM3X8E__
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "DUE3DOM MINI"
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO1_PIN 6
#define SERVO2_PIN 8 // 4-pin header FAN0
#define SERVO3_PIN -1
//
// Limit Switches
//
#define X_MIN_PIN 38
#define X_MAX_PIN -1
#define Y_MIN_PIN 34
#define Y_MAX_PIN -1
#define Z_MIN_PIN 30
#define Z_MAX_PIN -1
//
// Steppers
//
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 22
#define Y_STEP_PIN 2
#define Y_DIR_PIN 3
#define Y_ENABLE_PIN 26
#define Z_STEP_PIN 64
#define Z_DIR_PIN 63
#define Z_ENABLE_PIN 15
#define E0_STEP_PIN 61
#define E0_DIR_PIN 60
#define E0_ENABLE_PIN 62
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor)
#define TEMP_1_PIN 2 // Analog Input (unused)
#define TEMP_2_PIN 5 // Analog Input (OnBoard thermistor beta 3950)
#define TEMP_BED_PIN 1 // Analog Input (BED thermistor)
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
2018-02-17 21:24:04 -06:00
#define MAX6675_SS 53
2017-07-18 18:29:06 -05:00
#else
2018-02-17 21:24:04 -06:00
#define MAX6675_SS 53
2017-07-18 18:29:06 -05:00
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 13 // HOTEND0 MOSFET
#define HEATER_BED_PIN 7 // BED MOSFET
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN
//#define FAN3_PIN 8 // FAN0 4-pin header on board
//
// Misc. Functions
//
#define SDSS 4
#define PS_ON_PIN 40
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
2018-02-17 21:24:04 -06:00
2017-07-18 18:29:06 -05:00
#define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43
#define LCD_PINS_D4 44
#define LCD_PINS_D5 45
#define LCD_PINS_D6 46
#define LCD_PINS_D7 47
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
2018-02-17 21:24:04 -06:00
2017-07-18 18:29:06 -05:00
#define BEEPER_PIN 41
#define BTN_EN1 50
#define BTN_EN2 52
2017-09-27 05:10:57 -05:00
#define BTN_ENC 48
2017-07-18 18:29:06 -05:00
#define SDSS 4
#define SD_DETECT_PIN 14
#elif ENABLED(RADDS_DISPLAY)
2018-02-17 21:24:04 -06:00
2017-07-18 18:29:06 -05:00
#define BEEPER_PIN 41
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
2017-09-27 05:10:57 -05:00
2017-07-18 18:29:06 -05:00
#define BTN_BACK 71
2017-09-27 05:10:57 -05:00
2017-07-18 18:29:06 -05:00
#undef SDSS
#define SDSS 4
#define SD_DETECT_PIN 14
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
2018-02-17 21:24:04 -06:00
2017-07-18 18:29:06 -05:00
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define BEEPER_PIN 41
#define LCD_SDSS 4
#define SD_DETECT_PIN 14
#elif ENABLED(SPARK_FULL_GRAPHICS)
2018-02-17 21:24:04 -06:00
2017-07-18 18:29:06 -05:00
#define LCD_PINS_D4 29
#define LCD_PINS_ENABLE 27
#define LCD_PINS_RS 25
#define BTN_EN1 35
#define BTN_EN2 33
#define BTN_ENC 37
#define BEEPER_PIN -1
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD