Marlin_Firmware/Marlin/src/HAL/DUE/usb/udi_msc.c

/**
 * \file
 *
 * \brief USB Device Mass Storage Class (MSC) interface.
 *
 * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#ifdef ARDUINO_ARCH_SAM

#include "conf_usb.h"
#include "usb_protocol.h"
#include "usb_protocol_msc.h"
#include "spc_protocol.h"
#include "sbc_protocol.h"
#include "udd.h"
#include "udc.h"
#include "udi_msc.h"
#include "ctrl_access.h"
#include <string.h>

#if ENABLED(SDSUPPORT)

#ifndef UDI_MSC_NOTIFY_TRANS_EXT
#  define UDI_MSC_NOTIFY_TRANS_EXT()
#endif

/**
 * \ingroup udi_msc_group
 * \defgroup udi_msc_group_udc Interface with USB Device Core (UDC)
 *
 * Structures and functions required by UDC.
 *
 * @{
 */
bool udi_msc_enable(void);
void udi_msc_disable(void);
bool udi_msc_setup(void);
uint8_t udi_msc_getsetting(void);

//! Global structure which contains standard UDI API for UDC
UDC_DESC_STORAGE udi_api_t udi_api_msc = {
  .enable = udi_msc_enable,
  .disable = udi_msc_disable,
  .setup = udi_msc_setup,
  .getsetting = udi_msc_getsetting,
  .sof_notify = NULL,
};
//@}


/**
 * \ingroup udi_msc_group
 * \defgroup udi_msc_group_internal Implementation of UDI MSC
 *
 * Class internal implementation
 * @{
 */

//! Static block size for all memories
#define  UDI_MSC_BLOCK_SIZE   512L

/**
 * \name Variables to manage SCSI requests
 */
//@{

//! Structure to receive a CBW packet
UDC_BSS(4) static struct usb_msc_cbw udi_msc_cbw;
//! Structure to send a CSW packet
UDC_DATA(4) static struct usb_msc_csw udi_msc_csw =
    {.dCSWSignature = CPU_TO_BE32(USB_CSW_SIGNATURE) };
//! Number of lun
UDC_DATA(4) static uint8_t udi_msc_nb_lun = 0;
//! Structure with current SCSI sense data
UDC_BSS(4) static struct scsi_request_sense_data udi_msc_sense;

/**
 * \name Variables to manage the background read/write SCSI commands
 */
//@{
//! True if an invalid CBW command has been detected
static bool udi_msc_b_cbw_invalid = false;
//! True if a transfer command must be processed
static bool udi_msc_b_trans_req = false;
//! True if it is a read command, else write command
static bool udi_msc_b_read;
//! Memory address to execute the command
static uint32_t udi_msc_addr;
//! Number of block to transfer
static uint16_t udi_msc_nb_block;
//! Signal end of transfer, if true
volatile bool udi_msc_b_ack_trans = true;
//! Status of transfer, aborted if true
volatile bool udi_msc_b_abort_trans;
//! Signal (re)init of transfer, if true (by reset/reconnect)
volatile bool udi_msc_b_reset_trans = true;
//@}

//@}


/**
 * \name Internal routines
 */
//@{

/**
 * \name Routines to process CBW packet
 */
//@{

/**
 * \brief Stall CBW request
 */
static void udi_msc_cbw_invalid(void);

/**
 * \brief Stall CSW request
 */
static void udi_msc_csw_invalid(void);

/**
 * \brief Links a callback and buffer on endpoint OUT reception
 *
 * Called by:
 * - enable interface
 * - at the end of previous command after sending the CSW
 */
static void udi_msc_cbw_wait(void);

/**
 * \brief Callback called after CBW reception
 * Called by UDD when a transfer is finished or aborted
 *
 * \param status       UDD_EP_TRANSFER_OK, if transfer is finished
 * \param status       UDD_EP_TRANSFER_ABORT, if transfer is aborted
 * \param nb_received  number of data transfered
 */
static void udi_msc_cbw_received(udd_ep_status_t status,
    iram_size_t nb_received, udd_ep_id_t ep);

/**
 * \brief Function to check the CBW length and direction
 * Call it after SCSI command decode to check integrity of command
 *
 * \param alloc_len  number of bytes that device want transfer
 * \param dir_flag   Direction of transfer (USB_CBW_DIRECTION_IN/OUT)
 *
 * \retval true if the command can be processed
 */
static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag);
//@}


/**
 * \name Routines to process small data packet
 */
//@{

/**
 * \brief Sends data on MSC IN endpoint
 * Called by SCSI command which must send a data to host followed by a CSW
 *
 * \param buffer        Internal RAM buffer to send
 * \param buf_size   Size of buffer to send
 */
static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size);

/**
 * \brief Callback called after data sent
 * It start CSW packet process
 *
 * \param status     UDD_EP_TRANSFER_OK, if transfer finish
 * \param status     UDD_EP_TRANSFER_ABORT, if transfer aborted
 * \param nb_sent    number of data transfered
 */
static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep);
//@}


/**
 * \name Routines to process CSW packet
 */
//@{

/**
 * \brief Build CSW packet and send it
 *
 * Called at the end of SCSI command
 */
static void udi_msc_csw_process(void);

/**
 * \brief Sends CSW
 *
 * Called by #udi_msc_csw_process()
 * or UDD callback when endpoint halt is cleared
 */
void udi_msc_csw_send(void);

/**
 * \brief Callback called after CSW sent
 * It restart CBW reception.
 *
 * \param status     UDD_EP_TRANSFER_OK, if transfer is finished
 * \param status     UDD_EP_TRANSFER_ABORT, if transfer is aborted
 * \param nb_sent    number of data transfered
 */
static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep);
//@}


/**
 * \name Routines manage sense data
 */
//@{

/**
 * \brief Reinitialize sense data.
 */
static void udi_msc_clear_sense(void);

/**
 * \brief Update sense data with new value to signal a fail
 *
 * \param sense_key     Sense key
 * \param add_sense     Additional Sense Code
 * \param lba           LBA corresponding at error
 */
static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
    uint32_t lba);

/**
 * \brief Update sense data with new value to signal success
 */
static void udi_msc_sense_pass(void);

/**
 * \brief Update sense data to signal that memory is not present
 */
static void udi_msc_sense_fail_not_present(void);

/**
 * \brief Update sense data to signal that memory is busy
 */
static void udi_msc_sense_fail_busy_or_change(void);

/**
 * \brief Update sense data to signal a hardware error on memory
 */
static void udi_msc_sense_fail_hardware(void);

/**
 * \brief Update sense data to signal that memory is protected
 */
static void udi_msc_sense_fail_protected(void);

/**
 * \brief Update sense data to signal that CDB fields are not valid
 */
static void udi_msc_sense_fail_cdb_invalid(void);

/**
 * \brief Update sense data to signal that command is not supported
 */
static void udi_msc_sense_command_invalid(void);
//@}


/**
 * \name Routines manage SCSI Commands
 */
//@{

/**
 * \brief Process SPC Request Sense command
 * Returns error information about last command
 */
static void udi_msc_spc_requestsense(void);

/**
 * \brief Process SPC Inquiry command
 * Returns information (name,version) about disk
 */
static void udi_msc_spc_inquiry(void);

/**
 * \brief Checks state of disk
 *
 * \retval true if disk is ready, otherwise false and updates sense data
 */
static bool udi_msc_spc_testunitready_global(void);

/**
 * \brief Process test unit ready command
 * Returns state of logical unit
 */
static void udi_msc_spc_testunitready(void);

/**
 * \brief Process prevent allow medium removal command
 */
static void udi_msc_spc_prevent_allow_medium_removal(void);

/**
 * \brief Process mode sense command
 *
 * \param b_sense10     Sense10 SCSI command, if true
 * \param b_sense10     Sense6  SCSI command, if false
 */
static void udi_msc_spc_mode_sense(bool b_sense10);

/**
 * \brief Process start stop command
 */
static void udi_msc_sbc_start_stop(void);

/**
 * \brief Process read capacity command
 */
static void udi_msc_sbc_read_capacity(void);

/**
 * \brief Process read10 or write10 command
 *
 * \param b_read     Read transfer, if true,
 * \param b_read     Write transfer, if false
 */
static void udi_msc_sbc_trans(bool b_read);
//@}

//@}


bool udi_msc_enable(void)
{
  uint8_t lun;
  udi_msc_b_trans_req = false;
  udi_msc_b_cbw_invalid = false;
  udi_msc_b_ack_trans = true;
  udi_msc_b_reset_trans = true;
  udi_msc_nb_lun = get_nb_lun();
  if (0 == udi_msc_nb_lun)
    return false; // No lun available, then not authorize to enable interface
  udi_msc_nb_lun--;
  // Call application callback
  // to initialize memories or signal that interface is enabled
  if (!UDI_MSC_ENABLE_EXT())
    return false;
  // Load the medium on each LUN
  for (lun = 0; lun <= udi_msc_nb_lun; lun ++) {
    mem_unload(lun, false);
  }
  // Start MSC process by CBW reception
  udi_msc_cbw_wait();
  return true;
}


void udi_msc_disable(void)
{
  udi_msc_b_trans_req = false;
  udi_msc_b_ack_trans = true;
  udi_msc_b_reset_trans = true;
  UDI_MSC_DISABLE_EXT();
}


bool udi_msc_setup(void)
{
  if (Udd_setup_is_in()) {
    // Requests Interface GET
    if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
      // Requests Class Interface Get
      switch (udd_g_ctrlreq.req.bRequest) {
      case USB_REQ_MSC_GET_MAX_LUN:
        // Give the number of memories available
        if (1 != udd_g_ctrlreq.req.wLength)
          return false; // Error for USB host
        if (0 != udd_g_ctrlreq.req.wValue)
          return false;
        udd_g_ctrlreq.payload = &udi_msc_nb_lun;
        udd_g_ctrlreq.payload_size = 1;
        return true;
      }
    }
  }
  if (Udd_setup_is_out()) {
    // Requests Interface SET
    if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
      // Requests Class Interface Set
      switch (udd_g_ctrlreq.req.bRequest) {
      case USB_REQ_MSC_BULK_RESET:
        // Reset MSC interface
        if (0 != udd_g_ctrlreq.req.wLength)
          return false;
        if (0 != udd_g_ctrlreq.req.wValue)
          return false;
        udi_msc_b_cbw_invalid = false;
        udi_msc_b_trans_req = false;
        // Abort all tasks (transfer or clear stall wait) on endpoints
        udd_ep_abort(UDI_MSC_EP_OUT);
        udd_ep_abort(UDI_MSC_EP_IN);
        // Restart by CBW wait
        udi_msc_cbw_wait();
        return true;
      }
    }
  }
  return false; // Not supported request
}

uint8_t udi_msc_getsetting(void)
{
  return 0; // MSC don't have multiple alternate setting
}


// ------------------------
//------- Routines to process CBW packet

static void udi_msc_cbw_invalid(void)
{
  if (!udi_msc_b_cbw_invalid)
    return; // Don't re-stall endpoint if error reseted by setup
  udd_ep_set_halt(UDI_MSC_EP_OUT);
  // If stall cleared then re-stall it. Only Setup MSC Reset can clear it
  udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_invalid);
}

static void udi_msc_csw_invalid(void)
{
  if (!udi_msc_b_cbw_invalid)
    return; // Don't re-stall endpoint if error reseted by setup
  udd_ep_set_halt(UDI_MSC_EP_IN);
  // If stall cleared then re-stall it. Only Setup MSC Reset can clear it
  udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_invalid);
}

static void udi_msc_cbw_wait(void)
{
  // Register buffer and callback on OUT endpoint
  if (!udd_ep_run(UDI_MSC_EP_OUT, true,
          (uint8_t *) & udi_msc_cbw,
          sizeof(udi_msc_cbw),
          udi_msc_cbw_received)) {
    // OUT endpoint not available (halted), then wait a clear of halt.
    udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_wait);
  }
}


static void udi_msc_cbw_received(udd_ep_status_t status,
    iram_size_t nb_received, udd_ep_id_t ep)
{
  UNUSED(ep);
  // Check status of transfer
  if (UDD_EP_TRANSFER_OK != status) {
    // Transfer aborted
    // Now wait MSC setup reset to relaunch CBW reception
    return;
  }
  // Check CBW integrity:
  // transfer status/CBW length/CBW signature
  if ((sizeof(udi_msc_cbw) != nb_received)
      || (udi_msc_cbw.dCBWSignature !=
          CPU_TO_BE32(USB_CBW_SIGNATURE))) {
    // (5.2.1) Devices receiving a CBW with an invalid signature should stall
    // further traffic on the Bulk In pipe, and either stall further traffic
    // or accept and discard further traffic on the Bulk Out pipe, until
    // reset recovery.
    udi_msc_b_cbw_invalid = true;
    udi_msc_cbw_invalid();
    udi_msc_csw_invalid();
    return;
  }
  // Check LUN asked
  udi_msc_cbw.bCBWLUN &= USB_CBW_LUN_MASK;
  if (udi_msc_cbw.bCBWLUN > udi_msc_nb_lun) {
    // Bad LUN, then stop command process
    udi_msc_sense_fail_cdb_invalid();
    udi_msc_csw_process();
    return;
  }
  // Prepare CSW residue field with the size requested
  udi_msc_csw.dCSWDataResidue =
      le32_to_cpu(udi_msc_cbw.dCBWDataTransferLength);

  // Decode opcode
  switch (udi_msc_cbw.CDB[0]) {
  case SPC_REQUEST_SENSE:
    udi_msc_spc_requestsense();
    break;

  case SPC_INQUIRY:
    udi_msc_spc_inquiry();
    break;

  case SPC_MODE_SENSE6:
    udi_msc_spc_mode_sense(false);
    break;
  case SPC_MODE_SENSE10:
    udi_msc_spc_mode_sense(true);
    break;

  case SPC_TEST_UNIT_READY:
    udi_msc_spc_testunitready();
    break;

  case SBC_READ_CAPACITY10:
    udi_msc_sbc_read_capacity();
    break;

  case SBC_START_STOP_UNIT:
    udi_msc_sbc_start_stop();
    break;

    // Accepts request to support plug/plug in case of card reader
  case SPC_PREVENT_ALLOW_MEDIUM_REMOVAL:
    udi_msc_spc_prevent_allow_medium_removal();
    break;

    // Accepts request to support full format from Windows
  case SBC_VERIFY10:
    udi_msc_sense_pass();
    udi_msc_csw_process();
    break;

  case SBC_READ10:
    udi_msc_sbc_trans(true);
    break;

  case SBC_WRITE10:
    udi_msc_sbc_trans(false);
    break;

  default:
    udi_msc_sense_command_invalid();
    udi_msc_csw_process();
    break;
  }
}


static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag)
{
  /*
   * The following cases should result in a phase error:
   *  - Case  2: Hn < Di
   *  - Case  3: Hn < Do
   *  - Case  7: Hi < Di
   *  - Case  8: Hi <> Do
   *  - Case 10: Ho <> Di
   *  - Case 13: Ho < Do
   */
  if (((udi_msc_cbw.bmCBWFlags ^ dir_flag) & USB_CBW_DIRECTION_IN)
      || (udi_msc_csw.dCSWDataResidue < alloc_len)) {
    udi_msc_sense_fail_cdb_invalid();
    udi_msc_csw_process();
    return false;
  }

  /*
   * The following cases should result in a stall and nonzero
   * residue:
   *  - Case  4: Hi > Dn
   *  - Case  5: Hi > Di
   *  - Case  9: Ho > Dn
   *  - Case 11: Ho > Do
   */
  return true;
}


// ------------------------
//------- Routines to process small data packet

static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size)
{
  // Sends data on IN endpoint
  if (!udd_ep_run(UDI_MSC_EP_IN, true,
          buffer, buf_size, udi_msc_data_sent)) {
    // If endpoint not available, then exit process command
    udi_msc_sense_fail_hardware();
    udi_msc_csw_process();
  }
}


static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep)
{
  UNUSED(ep);
  if (UDD_EP_TRANSFER_OK != status) {
    // Error protocol
    // Now wait MSC setup reset to relaunch CBW reception
    return;
  }
  // Update sense data
  udi_msc_sense_pass();
  // Update CSW
  udi_msc_csw.dCSWDataResidue -= nb_sent;
  udi_msc_csw_process();
}


// ------------------------
//------- Routines to process CSW packet

static void udi_msc_csw_process(void)
{
  if (0 != udi_msc_csw.dCSWDataResidue) {
    // Residue not NULL
    // then STALL next request from USB host on corresponding endpoint
    if (udi_msc_cbw.bmCBWFlags & USB_CBW_DIRECTION_IN)
      udd_ep_set_halt(UDI_MSC_EP_IN);
    else
      udd_ep_set_halt(UDI_MSC_EP_OUT);
  }
  // Prepare and send CSW
  udi_msc_csw.dCSWTag = udi_msc_cbw.dCBWTag;
  udi_msc_csw.dCSWDataResidue = cpu_to_le32(udi_msc_csw.dCSWDataResidue);
  udi_msc_csw_send();
}


void udi_msc_csw_send(void)
{
  // Sends CSW on IN endpoint
  if (!udd_ep_run(UDI_MSC_EP_IN, false,
          (uint8_t *) & udi_msc_csw,
          sizeof(udi_msc_csw),
          udi_msc_csw_sent)) {
    // Endpoint not available
    // then restart CSW sent when endpoint IN STALL will be cleared
    udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_send);
  }
}


static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep)
{
  UNUSED(ep);
  UNUSED(status);
  UNUSED(nb_sent);
  // CSW is sent or not
  // In all case, restart process and wait CBW
  udi_msc_cbw_wait();
}


// ------------------------
//------- Routines manage sense data

static void udi_msc_clear_sense(void)
{
  memset((uint8_t*)&udi_msc_sense, 0, sizeof(struct scsi_request_sense_data));
  udi_msc_sense.valid_reponse_code = SCSI_SENSE_VALID | SCSI_SENSE_CURRENT;
  udi_msc_sense.AddSenseLen = SCSI_SENSE_ADDL_LEN(sizeof(udi_msc_sense));
}

static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
    uint32_t lba)
{
  udi_msc_clear_sense();
  udi_msc_csw.bCSWStatus = USB_CSW_STATUS_FAIL;
  udi_msc_sense.sense_flag_key = sense_key;
  udi_msc_sense.information[0] = lba >> 24;
  udi_msc_sense.information[1] = lba >> 16;
  udi_msc_sense.information[2] = lba >> 8;
  udi_msc_sense.information[3] = lba;
  udi_msc_sense.AddSenseCode = add_sense >> 8;
  udi_msc_sense.AddSnsCodeQlfr = add_sense;
}

static void udi_msc_sense_pass(void)
{
  udi_msc_clear_sense();
  udi_msc_csw.bCSWStatus = USB_CSW_STATUS_PASS;
}


static void udi_msc_sense_fail_not_present(void)
{
  udi_msc_sense_fail(SCSI_SK_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT, 0);
}

static void udi_msc_sense_fail_busy_or_change(void)
{
  udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION,
      SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0);
}

static void udi_msc_sense_fail_hardware(void)
{
  udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR,
      SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0);
}

static void udi_msc_sense_fail_protected(void)
{
  udi_msc_sense_fail(SCSI_SK_DATA_PROTECT, SCSI_ASC_WRITE_PROTECTED, 0);
}

static void udi_msc_sense_fail_cdb_invalid(void)
{
  udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
      SCSI_ASC_INVALID_FIELD_IN_CDB, 0);
}

static void udi_msc_sense_command_invalid(void)
{
  udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
      SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0);
}


// ------------------------
//------- Routines manage SCSI Commands

static void udi_msc_spc_requestsense(void)
{
  uint8_t length = udi_msc_cbw.CDB[4];

  // Can't send more than sense data length
  if (length > sizeof(udi_msc_sense))
    length = sizeof(udi_msc_sense);

  if (!udi_msc_cbw_validate(length, USB_CBW_DIRECTION_IN))
    return;
  // Send sense data
  udi_msc_data_send((uint8_t*)&udi_msc_sense, length);
}


static void udi_msc_spc_inquiry(void)
{
  uint8_t length, i;
  UDC_DATA(4)
  // Constant inquiry data for all LUNs
  static struct scsi_inquiry_data udi_msc_inquiry_data = {
    .pq_pdt = SCSI_INQ_PQ_CONNECTED | SCSI_INQ_DT_DIR_ACCESS,
    .version = SCSI_INQ_VER_SPC,
    .flags3 = SCSI_INQ_RSP_SPC2,
    .addl_len = SCSI_INQ_ADDL_LEN(sizeof(struct scsi_inquiry_data)),
    .vendor_id = {UDI_MSC_GLOBAL_VENDOR_ID},
    .product_rev = {UDI_MSC_GLOBAL_PRODUCT_VERSION},
  };

  length = udi_msc_cbw.CDB[4];

  // Can't send more than inquiry data length
  if (length > sizeof(udi_msc_inquiry_data))
    length = sizeof(udi_msc_inquiry_data);

  if (!udi_msc_cbw_validate(length, USB_CBW_DIRECTION_IN))
    return;
  if ((0 != (udi_msc_cbw.CDB[1] & (SCSI_INQ_REQ_EVPD | SCSI_INQ_REQ_CMDT)))
      || (0 != udi_msc_cbw.CDB[2])) {
    // CMDT and EPVD bits are not at 0
    // PAGE or OPERATION CODE fields are not empty
    //  = No standard inquiry asked
    udi_msc_sense_fail_cdb_invalid(); // Command is unsupported
    udi_msc_csw_process();
    return;
  }

  udi_msc_inquiry_data.flags1 = mem_removal(udi_msc_cbw.bCBWLUN) ?
      SCSI_INQ_RMB : 0;

  //* Fill product ID field
  // Copy name in product id field
  memcpy(udi_msc_inquiry_data.product_id,
      mem_name(udi_msc_cbw.bCBWLUN)+1, // To remove first '"'
      sizeof(udi_msc_inquiry_data.product_id));

  // Search end of name '/0' or '"'
  i = 0;
  while (sizeof(udi_msc_inquiry_data.product_id) != i) {
    if ((0 == udi_msc_inquiry_data.product_id[i])
        || ('"' == udi_msc_inquiry_data.product_id[i])) {
      break;
    }
    i++;
  }
  // Padding with space char
  while (sizeof(udi_msc_inquiry_data.product_id) != i) {
    udi_msc_inquiry_data.product_id[i] = ' ';
    i++;
  }

  // Send inquiry data
  udi_msc_data_send((uint8_t *) & udi_msc_inquiry_data, length);
}


static bool udi_msc_spc_testunitready_global(void)
{
  switch (mem_test_unit_ready(udi_msc_cbw.bCBWLUN)) {
  case CTRL_GOOD:
    return true;  // Don't change sense data
  case CTRL_BUSY:
    udi_msc_sense_fail_busy_or_change();
    break;
  case CTRL_NO_PRESENT:
    udi_msc_sense_fail_not_present();
    break;
  case CTRL_FAIL:
  default:
    udi_msc_sense_fail_hardware();
    break;
  }
  return false;
}


static void udi_msc_spc_testunitready(void)
{
  if (udi_msc_spc_testunitready_global()) {
    // LUN ready, then update sense data with status pass
    udi_msc_sense_pass();
  }
  // Send status in CSW packet
  udi_msc_csw_process();
}


static void udi_msc_spc_mode_sense(bool b_sense10)
{
  // Union of all mode sense structures
  union sense_6_10 {
    struct {
      struct scsi_mode_param_header6 header;
      struct spc_control_page_info_execpt sense_data;
    } s6;
    struct {
      struct scsi_mode_param_header10 header;
      struct spc_control_page_info_execpt sense_data;
    } s10;
  };

  uint8_t data_sense_lgt;
  uint8_t mode;
  uint8_t request_lgt;
  uint8_t wp;
  struct spc_control_page_info_execpt *ptr_mode;
  UDC_BSS(4)  static union sense_6_10 sense;

  // Clear all fields
  memset(&sense, 0, sizeof(sense));

  // Initialize process
  if (b_sense10) {
    request_lgt = udi_msc_cbw.CDB[8];
    ptr_mode = &sense.s10.sense_data;
    data_sense_lgt = sizeof(struct scsi_mode_param_header10);
  } else {
    request_lgt = udi_msc_cbw.CDB[4];
    ptr_mode = &sense.s6.sense_data;
    data_sense_lgt = sizeof(struct scsi_mode_param_header6);
  }

  // No Block descriptor

  // Fill page(s)
  mode = udi_msc_cbw.CDB[2] & SCSI_MS_MODE_ALL;
  if ((SCSI_MS_MODE_INFEXP == mode)
      || (SCSI_MS_MODE_ALL == mode)) {
    // Informational exceptions control page (from SPC)
    ptr_mode->page_code =
        SCSI_MS_MODE_INFEXP;
    ptr_mode->page_length =
        SPC_MP_INFEXP_PAGE_LENGTH;
    ptr_mode->mrie =
        SPC_MP_INFEXP_MRIE_NO_SENSE;
    data_sense_lgt += sizeof(struct spc_control_page_info_execpt);
  }
  // Can't send more than mode sense data length
  if (request_lgt > data_sense_lgt)
    request_lgt = data_sense_lgt;
  if (!udi_msc_cbw_validate(request_lgt, USB_CBW_DIRECTION_IN))
    return;

  // Fill mode parameter header length
  wp = (mem_wr_protect(udi_msc_cbw.bCBWLUN)) ? SCSI_MS_SBC_WP : 0;

  if (b_sense10) {
    sense.s10.header.mode_data_length =
        cpu_to_be16((data_sense_lgt - 2));
    //sense.s10.header.medium_type                 = 0;
    sense.s10.header.device_specific_parameter = wp;
    //sense.s10.header.block_descriptor_length     = 0;
  } else {
    sense.s6.header.mode_data_length = data_sense_lgt - 1;
    //sense.s6.header.medium_type                  = 0;
    sense.s6.header.device_specific_parameter = wp;
    //sense.s6.header.block_descriptor_length      = 0;
  }

  // Send mode sense data
  udi_msc_data_send((uint8_t *) & sense, request_lgt);
}


static void udi_msc_spc_prevent_allow_medium_removal(void)
{
  uint8_t prevent = udi_msc_cbw.CDB[4];
  if (0 == prevent) {
    udi_msc_sense_pass();
  } else {
    udi_msc_sense_fail_cdb_invalid(); // Command is unsupported
  }
  udi_msc_csw_process();
}


static void udi_msc_sbc_start_stop(void)
{
  bool start = 0x1 & udi_msc_cbw.CDB[4];
  bool loej = 0x2 & udi_msc_cbw.CDB[4];
  if (loej) {
    mem_unload(udi_msc_cbw.bCBWLUN, !start);
  }
  udi_msc_sense_pass();
  udi_msc_csw_process();
}


static void udi_msc_sbc_read_capacity(void)
{
  UDC_BSS(4) static struct sbc_read_capacity10_data udi_msc_capacity;

  if (!udi_msc_cbw_validate(sizeof(udi_msc_capacity),
          USB_CBW_DIRECTION_IN))
    return;

  // Get capacity of LUN
  switch (mem_read_capacity(udi_msc_cbw.bCBWLUN,
          &udi_msc_capacity.max_lba)) {
  case CTRL_GOOD:
    break;
  case CTRL_BUSY:
    udi_msc_sense_fail_busy_or_change();
    udi_msc_csw_process();
    return;
  case CTRL_NO_PRESENT:
    udi_msc_sense_fail_not_present();
    udi_msc_csw_process();
    return;
  default:
    udi_msc_sense_fail_hardware();
    udi_msc_csw_process();
    return;
  }

  // Format capacity data
  udi_msc_capacity.block_len = CPU_TO_BE32(UDI_MSC_BLOCK_SIZE);
  udi_msc_capacity.max_lba = cpu_to_be32(udi_msc_capacity.max_lba);
  // Send the corresponding sense data
  udi_msc_data_send((uint8_t *) & udi_msc_capacity,
      sizeof(udi_msc_capacity));
}


static void udi_msc_sbc_trans(bool b_read)
{
  uint32_t trans_size;

  if (!b_read) {
    // Write operation then check Write Protect
    if (mem_wr_protect(udi_msc_cbw.bCBWLUN)) {
      // Write not authorized
      udi_msc_sense_fail_protected();
      udi_msc_csw_process();
      return;
    }
  }
  // Read/Write command fields (address and number of block)
  MSB0(udi_msc_addr) = udi_msc_cbw.CDB[2];
  MSB1(udi_msc_addr) = udi_msc_cbw.CDB[3];
  MSB2(udi_msc_addr) = udi_msc_cbw.CDB[4];
  MSB3(udi_msc_addr) = udi_msc_cbw.CDB[5];
  MSB(udi_msc_nb_block) = udi_msc_cbw.CDB[7];
  LSB(udi_msc_nb_block) = udi_msc_cbw.CDB[8];

  // Compute number of byte to transfer and valid it
  trans_size = (uint32_t) udi_msc_nb_block *UDI_MSC_BLOCK_SIZE;
  if (!udi_msc_cbw_validate(trans_size,
          (b_read) ? USB_CBW_DIRECTION_IN :
          USB_CBW_DIRECTION_OUT))
    return;

  // Record transfer request to do it in a task and not under interrupt
  udi_msc_b_read = b_read;
  udi_msc_b_trans_req = true;
  UDI_MSC_NOTIFY_TRANS_EXT();
}


bool udi_msc_process_trans(void)
{
  Ctrl_status status;

  if (!udi_msc_b_trans_req)
    return false; // No Transfer request to do
  udi_msc_b_trans_req = false;
  udi_msc_b_reset_trans = false;

  // Start transfer
  if (udi_msc_b_read) {
    status = memory_2_usb(udi_msc_cbw.bCBWLUN, udi_msc_addr,
        udi_msc_nb_block);
  } else {
    status = usb_2_memory(udi_msc_cbw.bCBWLUN, udi_msc_addr,
        udi_msc_nb_block);
  }

  // Check if transfer is aborted by reset
  if (udi_msc_b_reset_trans) {
    udi_msc_b_reset_trans = false;
    return true;
  }

  // Check status of transfer
  switch (status) {
  case CTRL_GOOD:
    udi_msc_sense_pass();
    break;
  case CTRL_BUSY:
    udi_msc_sense_fail_busy_or_change();
    break;
  case CTRL_NO_PRESENT:
    udi_msc_sense_fail_not_present();
    break;
  default:
  case CTRL_FAIL:
    udi_msc_sense_fail_hardware();
    break;
  }
  // Send status of transfer in CSW packet
  udi_msc_csw_process();
  return true;
}


static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n,
    udd_ep_id_t ep)
{
  UNUSED(ep);
  UNUSED(n);
  // Update variable to signal the end of transfer
  udi_msc_b_abort_trans = (UDD_EP_TRANSFER_OK != status) ? true : false;
  udi_msc_b_ack_trans = true;
}


bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
    void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep))
{
  if (!udi_msc_b_ack_trans)
    return false; // No possible, transfer on going

  // Start transfer Internal RAM<->USB line
  udi_msc_b_ack_trans = false;
  if (!udd_ep_run((b_read) ? UDI_MSC_EP_IN : UDI_MSC_EP_OUT,
          false,
          block,
          block_size,
          (NULL == callback) ? udi_msc_trans_ack :
          callback)) {
    udi_msc_b_ack_trans = true;
    return false;
  }
  if (NULL == callback) {
    while (!udi_msc_b_ack_trans);
    if (udi_msc_b_abort_trans) {
      return false;
    }
    udi_msc_csw.dCSWDataResidue -= block_size;
    return (!udi_msc_b_abort_trans);
  }
  udi_msc_csw.dCSWDataResidue -= block_size;
  return true;
}

//@}

#endif // SDSUPPORT

#endif // ARDUINO_ARCH_SAM