Marlin_Firmware/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * Longer3D LK1/LK2 & Alfawise U20/U30 (STM32F103VET6) board pin assignments
 */

#if NOT_TARGET(__STM32F1__, STM32F1xx)
  #error "Oops! Select a STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
  #error "Longer3D board only supports 1 hotend / E-stepper. Comment out this line to continue."
#endif

#define BOARD_INFO_NAME "Longer3D"
#define ALFAWISE_UX0                              // Common to all Longer3D STM32F1 boards (used for Open drain mosfets)

//#define DISABLE_DEBUG                           //  We still want to debug with STLINK...
#define DISABLE_JTAG                              //  We free the jtag pins (PA15) but keep STLINK
                                                  //  Release PB4 (STEP_X_PIN) from JTAG NRST role.
//
// Limit Switches
//
#define X_MIN_PIN                           PC1   // pin 16
#define X_MAX_PIN                           PC0   // pin 15 (Filament sensor on Alfawise setup)
#define Y_MIN_PIN                           PC15  // pin 9
#define Y_MAX_PIN                           PC14  // pin 8 (Unused in stock Alfawise setup)
#define Z_MIN_PIN                           PE6   // pin 5 Standard Endstop or Z_Probe endstop function
#define Z_MAX_PIN                           PE5   // pin 4 (Unused in stock Alfawise setup)
                                 // May be used for BLTouch Servo function on older variants (<= V08)
#define ONBOARD_ENDSTOPPULLUPS

//
// Filament Sensor
//
#ifndef FIL_RUNOUT_PIN
  #define FIL_RUNOUT_PIN                    PC0   // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
#endif

//
// Steppers
//
#define X_ENABLE_PIN                        PB5   // pin 91
#define X_STEP_PIN                          PB4   // pin 90
#define X_DIR_PIN                           PB3   // pin 89

#define Y_ENABLE_PIN                        PB8   // pin 95
#define Y_STEP_PIN                          PB7   // pin 93
#define Y_DIR_PIN                           PB6   // pin 92

#define Z_ENABLE_PIN                        PE1   // pin 98
#define Z_STEP_PIN                          PE0   // pin 97
#define Z_DIR_PIN                           PB9   // pin 96

#define E0_ENABLE_PIN                       PE4   // pin 3
#define E0_STEP_PIN                         PE3   // pin 2
#define E0_DIR_PIN                          PE2   // pin 1

//
// Temperature Sensors
//
#define TEMP_0_PIN                          PA0   // pin 23 (Nozzle 100K/3950 thermistor)
#define TEMP_BED_PIN                        PA1   // pin 24 (Hot Bed 100K/3950 thermistor)

//
// Heaters / Fans
//
#define HEATER_0_PIN                        PD3   // pin 84 (Nozzle Heat Mosfet)
#define HEATER_BED_PIN                      PA8   // pin 67 (Hot Bed Mosfet)

#define FAN_PIN                             PA15  // pin 77 (4cm Fan)
#define FAN_SOFT_PWM                              // Required to avoid issues with heating or STLink
#define FAN_MIN_PWM                           35  // Fan will not start in 1-30 range
#define FAN_MAX_PWM                          255

//#define BEEPER_PIN                        PD13  // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor
                                 // Can drive a PC Buzzer, if connected between PWM and 5V pins

#define LED_PIN                             PC2   // pin 17

//
// PWM for a servo probe
// Other servo devices are not supported on this board!
//
#if HAS_Z_SERVO_PROBE
  #define SERVO0_PIN                        PD13  // Open drain PWM pin on the V0G (GND or floating 5V)
  #define SERVO0_PWM_OD                           // Comment this if using PE5

  //#define SERVO0_PIN                      PE5   // Pulled up PWM pin on the V08 (3.3V or 0)
  //#undef Z_MAX_PIN                              // Uncomment if using ZMAX connector (PE5)
#endif

/**
 * Note: Alfawise screens use various TFT controllers. Supported screens
 * are based on the ILI9341, ILI9328 and ST7798V. Define init sequences for
 * other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
 *
 * If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader
 * init the screen.
 *
 * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
 * because Marlin uses the reset as a failsafe to revive a glitchy LCD.
 */

#define LCD_RESET_PIN                       PC4   // pin 33
#define TFT_RESET_PIN                       PC4   // pin 33
#define TFT_BACKLIGHT_PIN                   PD12  // pin 59
#define FSMC_CS_PIN                         PD7   // pin 88 = FSMC_NE1
#define FSMC_RS_PIN                         PD11  // pin 58 A16 Register. Only one address needed

#define LCD_USE_DMA_FSMC                          // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV                        DMA2
#define FSMC_DMA_CHANNEL                 DMA_CH5

#define DOGLCD_MOSI                         -1    // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK                          -1

#define GRAPHICAL_TFT_UPSCALE                  2
#define TFT_WIDTH                            320
#define TFT_HEIGHT                           240
#define TFT_PIXEL_OFFSET_X                    32
#define TFT_PIXEL_OFFSET_Y                    32

//#define TFT_DRIVER                     ILI9341

/**
 * Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer
 * mixed up MOSI and MISO pins. SPI is managed in SW, and needs pins
 * declared below.
 */
#if NEED_TOUCH_PINS
  #define TOUCH_CS_PIN                      PB12  // pin 51 SPI2_NSS
  #define TOUCH_SCK_PIN                     PB13  // pin 52
  #define TOUCH_MOSI_PIN                    PB14  // pin 53
  #define TOUCH_MISO_PIN                    PB15  // pin 54
  #define TOUCH_INT_PIN                     PC6   // pin 63 (PenIRQ coming from ADS7843)
#endif

//
// Persistent Storage
// If no option is selected below the SD Card will be used
//
#if NO_EEPROM_SELECTED
  //#define SPI_EEPROM
  #define FLASH_EEPROM_EMULATION
#endif

#if ENABLED(SPI_EEPROM)
  // SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits)
  #define SPI_CHAN_EEPROM1                     1
  #define SPI_EEPROM1_CS                    PC5   // pin 34
  #define EEPROM_SCK          BOARD_SPI1_SCK_PIN  // PA5 pin 30
  #define EEPROM_MISO        BOARD_SPI1_MISO_PIN  // PA6 pin 31
  #define EEPROM_MOSI        BOARD_SPI1_MOSI_PIN  // PA7 pin 32
  #define EEPROM_PAGE_SIZE               0x1000U  // 4KB (from datasheet)
  #define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE)   // Limit to 64KB for now...
#elif ENABLED(FLASH_EEPROM_EMULATION)
  // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
  #define EEPROM_PAGE_SIZE     (0x800U)           // 2KB
  #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
  #define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE)
#else
  #define MARLIN_EEPROM_SIZE              0x800U  // On SD, Limit to 2KB, require this amount of RAM
#endif