2016-12-12 09:18:53 -06:00
/**
* Marlin 3 D Printer Firmware
2020-02-03 08:00:57 -06:00
* Copyright ( c ) 2020 MarlinFirmware [ https : //github.com/MarlinFirmware/Marlin]
2016-12-12 09:18:53 -06:00
*
* Based on Sprinter and grbl .
2019-06-27 23:57:50 -05:00
* Copyright ( c ) 2011 Camiel Gubbels / Erik van der Zalm
2016-12-12 09:18:53 -06:00
*
* This program is free software : you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation , either version 3 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
2020-07-22 22:20:14 -05:00
* along with this program . If not , see < https : //www.gnu.org/licenses/>.
2016-12-12 09:18:53 -06:00
*
*/
2018-11-04 02:25:55 -06:00
# pragma once
2016-12-12 09:18:53 -06:00
/**
2017-07-03 15:24:49 -05:00
* Simplified Chinese
2016-12-12 09:18:53 -06:00
*
* LCD Menu Messages
2020-04-12 17:21:02 -05:00
* See also https : //marlinfw.org/docs/development/lcd_language.html
2016-12-12 09:18:53 -06:00
*/
2019-10-09 19:46:10 -05:00
namespace Language_zh_CN {
using namespace Language_en ; // Inherit undefined strings from English
2016-12-12 09:18:53 -06:00
2019-10-09 19:46:10 -05:00
constexpr uint8_t CHARSIZE = 3 ;
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str LANGUAGE = _UxGT ( " 简体中文 " ) ;
2018-02-08 23:03:47 -06:00
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT ( " 已就绪. " ) ; //" ready."
2020-07-08 01:15:05 -05:00
PROGMEM Language_Str MSG_MARLIN = _UxGT ( " 马林 " ) ;
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_YES = _UxGT ( " 是 " ) ;
PROGMEM Language_Str MSG_NO = _UxGT ( " 否 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_BACK = _UxGT ( " 返回 " ) ; // ”Back“
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT ( " 放弃中... " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT ( " 存储卡已插入 " ) ; //"Card inserted"
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT ( " 存储卡被拔出 " ) ; //"Card removed"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT ( " 等待存储器 " ) ;
PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT ( " 存储器读取错误 " ) ;
PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT ( " USB设备已弹出 " ) ;
PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT ( " USB启动错误 " ) ;
PROGMEM Language_Str MSG_KILL_SUBCALL_OVERFLOW = _UxGT ( " 子响应溢出 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT ( " 挡块 " ) ; //"Endstops" // Max length 8 characters
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT ( " 软挡块 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_MAIN = _UxGT ( " 主菜单 " ) ; //"Main"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT ( " 高级设置 " ) ;
PROGMEM Language_Str MSG_CONFIGURATION = _UxGT ( " 配置 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_AUTOSTART = _UxGT ( " 自动开始 " ) ; //"Autostart"
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT ( " 关闭步进电机 " ) ; //"Disable steppers"
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT ( " 调试菜单 " ) ; // "Debug Menu"
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT ( " 进度条测试 " ) ; // "Progress Bar Test"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT ( " 自动回原点 " ) ; //"Auto home"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT ( " 回X原位 " ) ; //"Home X"
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT ( " 回Y原位 " ) ; //"Home Y"
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT ( " 回Z原位 " ) ; //"Home Z"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT ( " 自动Z对齐 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT ( " 平台调平XYZ归原位 " ) ; //"Homing XYZ"
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT ( " 单击开始热床调平 " ) ; //"Click to Begin"
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT ( " 下个热床调平点 " ) ; //"Next Point"
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT ( " 完成热床调平 " ) ; //"Leveling Done!"
PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT ( " 淡出高度 " ) ; // "Fade Height"
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT ( " 设置原点偏移 " ) ; //"Set home offsets"
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT ( " 偏移已启用 " ) ; //"Offsets applied"
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT ( " 设置原点 " ) ; //"Set origin"
2020-07-09 03:11:57 -05:00
# if PREHEAT_COUNT
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT ( " 预热 " ) PREHEAT_1_LABEL ; //"Preheat PREHEAT_2_LABEL"
PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT ( " 预热 " ) PREHEAT_1_LABEL " ~ " ; //"Preheat PREHEAT_2_LABEL"
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT ( " 预热 " ) PREHEAT_1_LABEL _UxGT ( " 喷嘴 " ) ; //MSG_PREHEAT_1 " "
PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT ( " 预热 " ) PREHEAT_1_LABEL _UxGT ( " 喷嘴 ~ " ) ; //MSG_PREHEAT_1 " "
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT ( " 预热 " ) PREHEAT_1_LABEL _UxGT ( " 全部 " ) ; //MSG_PREHEAT_1 " All"
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT ( " 预热 " ) PREHEAT_1_LABEL _UxGT ( " 热床 " ) ; //MSG_PREHEAT_1 " Bed"
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT ( " 预热 " ) PREHEAT_1_LABEL _UxGT ( " 设置 " ) ; //MSG_PREHEAT_1 " conf"
PROGMEM Language_Str MSG_PREHEAT_M = _UxGT ( " 预热 $ " ) ; //"Preheat PREHEAT_2_LABEL"
PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT ( " 预热 $ ~ " ) ; //"Preheat PREHEAT_2_LABEL"
PROGMEM Language_Str MSG_PREHEAT_M_END = _UxGT ( " 预热 $ 喷嘴 " ) ; //MSG_PREHEAT_1 " "
PROGMEM Language_Str MSG_PREHEAT_M_END_E = _UxGT ( " 预热 $ 喷嘴 ~ " ) ; //MSG_PREHEAT_1 " "
PROGMEM Language_Str MSG_PREHEAT_M_ALL = _UxGT ( " 预热 $ 全部 " ) ; //MSG_PREHEAT_1 " All"
PROGMEM Language_Str MSG_PREHEAT_M_BEDONLY = _UxGT ( " 预热 $ 热床 " ) ; //MSG_PREHEAT_1 " Bed"
PROGMEM Language_Str MSG_PREHEAT_M_SETTINGS = _UxGT ( " 预热 $ 设置 " ) ; //MSG_PREHEAT_1 " conf"
# endif
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT ( " 预热自定义 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_COOLDOWN = _UxGT ( " 降温 " ) ; //"Cooldown"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_CUTTER_FREQUENCY = _UxGT ( " 切割频率 " ) ;
PROGMEM Language_Str MSG_LASER_MENU = _UxGT ( " 激光控制 " ) ;
PROGMEM Language_Str MSG_LASER_OFF = _UxGT ( " 激光关 " ) ;
PROGMEM Language_Str MSG_LASER_ON = _UxGT ( " 激光开 " ) ;
PROGMEM Language_Str MSG_LASER_POWER = _UxGT ( " 激光电源 " ) ;
PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT ( " 主轴控制 " ) ;
PROGMEM Language_Str MSG_SPINDLE_OFF = _UxGT ( " 主轴关 " ) ;
PROGMEM Language_Str MSG_SPINDLE_ON = _UxGT ( " 主轴开 " ) ;
PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT ( " 主轴电源 " ) ;
PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT ( " 主轴反转 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT ( " 电源打开 " ) ; //"Switch power on"
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT ( " 电源关闭 " ) ; //"Switch power off"
PROGMEM Language_Str MSG_EXTRUDE = _UxGT ( " 挤出 " ) ; //"Extrude"
PROGMEM Language_Str MSG_RETRACT = _UxGT ( " 回抽 " ) ; //"Retract"
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT ( " 移动轴 " ) ; //"Move axis"
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT ( " 调平热床 " ) ; //"Bed leveling"
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT ( " 调平热床 " ) ; //"Level bed"
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT ( " 调平边角 " ) ; // "Level corners"
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT ( " 下个边角 " ) ; // "Next corner"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT ( " 网格编辑器 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT ( " 编辑网格 " ) ; // "Edit Mesh"
PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT ( " 网格编辑已停止 " ) ; // "Mesh Editing Stopped"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_PROBING_MESH = _UxGT ( " 探测点 " ) ;
PROGMEM Language_Str MSG_MESH_X = _UxGT ( " 索引X " ) ;
PROGMEM Language_Str MSG_MESH_Y = _UxGT ( " 索引Y " ) ;
PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT ( " Z 值 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_USER_MENU = _UxGT ( " 定制命令 " ) ; // "Custom Commands"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_M48_TEST = _UxGT ( " M48探测 " ) ;
PROGMEM Language_Str MSG_M48_POINT = _UxGT ( " M48点 " ) ;
PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT ( " M48偏差 " ) ;
PROGMEM Language_Str MSG_IDEX_MENU = _UxGT ( " IDEX模式 " ) ;
PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT ( " 工具偏移量 " ) ;
PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK = _UxGT ( " 自动停靠 " ) ;
PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE = _UxGT ( " 复制 " ) ;
PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY = _UxGT ( " 镜像复制 " ) ;
PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL = _UxGT ( " 完全控制 " ) ;
PROGMEM Language_Str MSG_HOTEND_OFFSET_X = _UxGT ( " 第二喷头是X " ) ;
PROGMEM Language_Str MSG_HOTEND_OFFSET_Y = _UxGT ( " 第二喷头是Y " ) ;
PROGMEM Language_Str MSG_HOTEND_OFFSET_Z = _UxGT ( " 第二喷头是Z " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT ( " 执行G29 " ) ; // "Doing G29"
PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT ( " UBL工具 " ) ; // "UBL Tools"
PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT ( " 统一热床调平(UBL) " ) ; // "Unified Bed Leveling"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT ( " 倾斜點 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT ( " 手工创设网格 " ) ; // "Manually Build Mesh"
PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT ( " 放置垫片并测量 " ) ; // "Place shim & measure"
PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT ( " 测量 " ) ; // "Measure"
PROGMEM Language_Str MSG_UBL_BC_REMOVE = _UxGT ( " 移除并测量热床 " ) ; // "Remove & measure bed"
PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT ( " 移动到下一个 " ) ; // "Moving to next"
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT ( " 激活UBL " ) ; // "Activate UBL"
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT ( " 关闭UBL " ) ; // "Deactivate UBL"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT ( " 热床温度 " ) ; // "Bed Temp"
PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT ( " 热床温度 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT ( " 热端温度 " ) ; // "Hotend Temp"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT ( " 热端温度 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT ( " 网格编辑 " ) ; // "Mesh Edit"
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT ( " 编辑客户网格 " ) ; // "Edit Custom Mesh"
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT ( " 细调网格 " ) ; // "Fine Tuning Mesh"
PROGMEM Language_Str MSG_UBL_DONE_EDITING_MESH = _UxGT ( " 完成编辑网格 " ) ; // "Done Editing Mesh"
PROGMEM Language_Str MSG_UBL_BUILD_CUSTOM_MESH = _UxGT ( " 创设客户网格 " ) ; // "Build Custom Mesh"
PROGMEM Language_Str MSG_UBL_BUILD_MESH_MENU = _UxGT ( " 创设网格 " ) ; // "Build Mesh"
2020-07-09 03:11:57 -05:00
# if PREHEAT_COUNT
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M = _UxGT ( " 创设 $ 网格 " ) ; // "Build PREHEAT_1_LABEL Mesh"
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M = _UxGT ( " 批准 $ 网格 " ) ; // "Validate PREHEAT_1_LABEL Mesh"
# endif
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_BUILD_COLD_MESH = _UxGT ( " 创设冷网格 " ) ; // "Build Cold Mesh"
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT ( " 调整网格高度 " ) ; // "Adjust Mesh Height"
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT ( " 高度合计 " ) ; // "Height Amount"
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT ( " 批准网格 " ) ; // "Validate Mesh"
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT ( " 批准客户网格 " ) ; // "Validate Custom Mesh"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT ( " G26加热热床 " ) ;
PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT ( " G26加热喷嘴 " ) ;
PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT ( " 手动填装中... " ) ;
PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT ( " 固定距离填装 " ) ;
PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT ( " 填装完成 " ) ;
PROGMEM Language_Str MSG_G26_CANCELED = _UxGT ( " G26已取消 " ) ;
PROGMEM Language_Str MSG_G26_LEAVING = _UxGT ( " 离开G26 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT ( " 继续热床网格 " ) ; // "Continue Bed Mesh"
PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT ( " 网格调平 " ) ; // "Mesh Leveling"
PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT ( " 三点调平 " ) ; // "3-Point Leveling"
PROGMEM Language_Str MSG_UBL_GRID_MESH_LEVELING = _UxGT ( " 格子网格调平 " ) ; // "Grid Mesh Leveling"
PROGMEM Language_Str MSG_UBL_MESH_LEVEL = _UxGT ( " 调平网格 " ) ; // "Level Mesh"
PROGMEM Language_Str MSG_UBL_SIDE_POINTS = _UxGT ( " 边点 " ) ; // "Side Points"
PROGMEM Language_Str MSG_UBL_MAP_TYPE = _UxGT ( " 图类型 " ) ; // "Map Type"
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT ( " 输出网格图 " ) ; // "Output Mesh Map"
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT ( " 输出到主机 " ) ; // "Output for Host"
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT ( " 输出到CSV " ) ; // "Output for CSV"
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT ( " 输出到备份 " ) ; // "Off Printer Backup"
PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT ( " 输出UBL信息 " ) ; // "Output UBL Info"
PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT ( " 填充合计 " ) ; // "Fill-in Amount"
PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT ( " 手工填充 " ) ; // "Manual Fill-in"
PROGMEM Language_Str MSG_UBL_SMART_FILLIN = _UxGT ( " 聪明填充 " ) ; // "Smart Fill-in"
PROGMEM Language_Str MSG_UBL_FILLIN_MESH = _UxGT ( " 填充网格 " ) ; // "Fill-in Mesh"
PROGMEM Language_Str MSG_UBL_INVALIDATE_ALL = _UxGT ( " 作废所有的 " ) ; // "Invalidate All"
PROGMEM Language_Str MSG_UBL_INVALIDATE_CLOSEST = _UxGT ( " 作废最近的 " ) ; // "Invalidate Closest"
PROGMEM Language_Str MSG_UBL_FINE_TUNE_ALL = _UxGT ( " 细调所有的 " ) ; // "Fine Tune All"
PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT ( " 细调最近的 " ) ; // "Fine Tune Closest"
PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT ( " 网格存储 " ) ; // "Mesh Storage"
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT ( " 存储槽 " ) ; // "Memory Slot"
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT ( " 装载热床网格 " ) ; // "Load Bed Mesh"
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT ( " 保存热床网格 " ) ; // "Save Bed Mesh"
2020-04-09 20:05:58 -05:00
PROGMEM Language_Str MSG_MESH_LOADED = _UxGT ( " 网格 %i 已装载 " ) ; // "Mesh %i loaded"
PROGMEM Language_Str MSG_MESH_SAVED = _UxGT ( " 网格 %i 已保存 " ) ; // "Mesh %i saved"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT ( " 没有存储 " ) ; // "No storage"
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT ( " 错误: UBL保存 " ) ; // "Err: UBL Save"
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT ( " 错误: UBL还原 " ) ; // "Err: UBL Restore"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT ( " Z偏移量: " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT ( " Z偏移已停止 " ) ; // "Z-Offset Stopped"
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT ( " 一步步UBL " ) ; // "Step-By-Step UBL"
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT ( " 1. 创设冷网格 " ) ;
PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT ( " 2. 聪明填充 " ) ;
PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT ( " 3. 批准网格 " ) ;
PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT ( " 4. 细调所有的 " ) ;
PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT ( " 5. 批准网格 " ) ;
PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT ( " 6. 细调所有的 " ) ;
PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT ( " 7. 保存热床网格 " ) ;
2018-03-25 11:37:54 -05:00
2020-07-08 01:15:05 -05:00
PROGMEM Language_Str MSG_LED_CONTROL = _UxGT ( " LED控制 " ) ; // "LED Control")
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_LEDS = _UxGT ( " 灯 " ) ; // "Lights")
PROGMEM Language_Str MSG_LED_PRESETS = _UxGT ( " 灯预置 " ) ; // "Light Presets")
PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT ( " 红 " ) ; // "Red")
PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT ( " 橙 " ) ; // "Orange")
PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT ( " 黄 " ) ; // "Yellow")
PROGMEM Language_Str MSG_SET_LEDS_GREEN = _UxGT ( " 绿 " ) ; // "Green")
PROGMEM Language_Str MSG_SET_LEDS_BLUE = _UxGT ( " 蓝 " ) ; // "Blue")
PROGMEM Language_Str MSG_SET_LEDS_INDIGO = _UxGT ( " 青 " ) ; // "Indigo")
PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT ( " 紫 " ) ; // "Violet")
PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT ( " 白 " ) ; // "White")
PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT ( " 缺省 " ) ; // "Default")
PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT ( " 定制灯 " ) ; // "Custom Lights")
PROGMEM Language_Str MSG_INTENSITY_R = _UxGT ( " 红饱和度 " ) ; // "Red Intensity")
PROGMEM Language_Str MSG_INTENSITY_G = _UxGT ( " 绿饱和度 " ) ; // "Green Intensity")
PROGMEM Language_Str MSG_INTENSITY_B = _UxGT ( " 蓝饱和度 " ) ; // "Blue Intensity")
PROGMEM Language_Str MSG_INTENSITY_W = _UxGT ( " 白饱和度 " ) ; // "White Intensity")
PROGMEM Language_Str MSG_LED_BRIGHTNESS = _UxGT ( " 亮度 " ) ; // "Brightness")
2018-09-19 15:04:34 -05:00
2020-07-19 17:23:52 -05:00
PROGMEM Language_Str MSG_MOVING = _UxGT ( " 移动... " ) ; // "Moving...")
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FREE_XY = _UxGT ( " 释放 XY " ) ; // "Free XY")
PROGMEM Language_Str MSG_MOVE_X = _UxGT ( " 移动X " ) ; //"Move X"
PROGMEM Language_Str MSG_MOVE_Y = _UxGT ( " 移动Y " ) ; //"Move Y"
PROGMEM Language_Str MSG_MOVE_Z = _UxGT ( " 移动Z " ) ; //"Move Z"
PROGMEM Language_Str MSG_MOVE_E = _UxGT ( " 挤出机 " ) ; //"Extruder"
2019-11-14 20:30:30 -06:00
PROGMEM Language_Str MSG_MOVE_EN = _UxGT ( " 挤出机 * " ) ; //"Extruder"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT ( " 热端太冷 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT ( " 移动 %s mm " ) ; //"Move 0.025mm"
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT ( " 移动 0.1 mm " ) ; //"Move 0.1mm"
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT ( " 移动 1 mm " ) ; //"Move 1mm"
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT ( " 移动 10 mm " ) ; //"Move 10mm"
PROGMEM Language_Str MSG_SPEED = _UxGT ( " 速率 " ) ; //"Speed"
PROGMEM Language_Str MSG_BED_Z = _UxGT ( " 热床Z " ) ; //"Bed Z"
2020-07-08 01:15:05 -05:00
PROGMEM Language_Str MSG_NOZZLE = _UxGT ( " 喷嘴 " ) ; //"Nozzle" 噴嘴
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT ( " 喷嘴 ~ " ) ; //"Nozzle" 噴嘴
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_NOZZLE_PARKED = _UxGT ( " 喷嘴已停靠 " ) ;
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT ( " 喷嘴待命中 " ) ;
2020-07-08 01:15:05 -05:00
PROGMEM Language_Str MSG_BED = _UxGT ( " 热床 " ) ; //"Bed"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_CHAMBER = _UxGT ( " 机箱壳 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT ( " 风扇速率 " ) ; //"Fan speed"
2020-01-25 02:13:39 -06:00
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT ( " 风扇速率 ~ " ) ; //"Fan speed"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT ( " 存储的风扇 ~ " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT ( " 额外风扇速率 " ) ; // "Extra fan speed"
2020-01-25 02:13:39 -06:00
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT ( " 额外风扇速率 ~ " ) ; // "Extra fan speed"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_CONTROLLER_FAN = _UxGT ( " 控制器风扇 " ) ;
PROGMEM Language_Str MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT ( " 空闲速度 " ) ;
PROGMEM Language_Str MSG_CONTROLLER_FAN_AUTO_ON = _UxGT ( " 自动模式 " ) ;
PROGMEM Language_Str MSG_CONTROLLER_FAN_SPEED = _UxGT ( " 工作速度 " ) ;
PROGMEM Language_Str MSG_CONTROLLER_FAN_DURATION = _UxGT ( " 空闲周期 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FLOW = _UxGT ( " 挤出速率 " ) ; //"Flow"
2019-11-14 20:30:30 -06:00
PROGMEM Language_Str MSG_FLOW_N = _UxGT ( " 挤出速率 ~ " ) ; //"Flow"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_CONTROL = _UxGT ( " 控制 " ) ; //"Control"
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT ( " 最小 " ) ; //" " LCD_STR_THERMOMETER " Min"
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT ( " 最大 " ) ; //" " LCD_STR_THERMOMETER " Max"
PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT ( " 因数 " ) ; //" " LCD_STR_THERMOMETER " Fact"
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT ( " 自动控温 " ) ; //"Autotemp"
PROGMEM Language_Str MSG_LCD_ON = _UxGT ( " 开 " ) ; //"On"
PROGMEM Language_Str MSG_LCD_OFF = _UxGT ( " 关 " ) ; //"Off"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT ( " 自动PID " ) ;
PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT ( " 自动PID * " ) ;
PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE = _UxGT ( " PID调整完成 " ) ;
PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM = _UxGT ( " 自动调失败. 坏的挤出机 " ) ;
PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH = _UxGT ( " 自动调失败. 温度太高 " ) ;
PROGMEM Language_Str MSG_PID_TIMEOUT = _UxGT ( " 自动调失败! 超时 " ) ;
PROGMEM Language_Str MSG_PID_P = _UxGT ( " PID-P " ) ;
PROGMEM Language_Str MSG_PID_P_E = _UxGT ( " PID-P * " ) ;
PROGMEM Language_Str MSG_PID_I = _UxGT ( " PID-I " ) ;
PROGMEM Language_Str MSG_PID_I_E = _UxGT ( " PID-I * " ) ;
PROGMEM Language_Str MSG_PID_D = _UxGT ( " PID-D " ) ;
PROGMEM Language_Str MSG_PID_D_E = _UxGT ( " PID-D * " ) ;
PROGMEM Language_Str MSG_PID_C = _UxGT ( " PID-C " ) ;
PROGMEM Language_Str MSG_PID_C_E = _UxGT ( " PID-C * " ) ;
PROGMEM Language_Str MSG_PID_F = _UxGT ( " PID-F " ) ;
PROGMEM Language_Str MSG_PID_F_E = _UxGT ( " PID-F * " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_SELECT = _UxGT ( " 选择 " ) ; //"Select"
2019-11-14 20:30:30 -06:00
PROGMEM Language_Str MSG_SELECT_E = _UxGT ( " 选择 * " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_ACC = _UxGT ( " 加速度 " ) ; //"Accel" acceleration
PROGMEM Language_Str MSG_JERK = _UxGT ( " 抖动速率 " ) ; // "Jerk"
PROGMEM Language_Str MSG_VA_JERK = _UxGT ( " 轴抖动速率 " ) LCD_STR_A ; //"Va-jerk"
PROGMEM Language_Str MSG_VB_JERK = _UxGT ( " 轴抖动速率 " ) LCD_STR_B ; //"Vb-jerk"
PROGMEM Language_Str MSG_VC_JERK = _UxGT ( " 轴抖动速率 " ) LCD_STR_C ; //"Vc-jerk"
PROGMEM Language_Str MSG_VE_JERK = _UxGT ( " 挤出机抖动速率 " ) ; //"Ve-jerk"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT ( " 接点差 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_VELOCITY = _UxGT ( " 速度 " ) ; // "Velocity"
PROGMEM Language_Str MSG_VMAX_A = _UxGT ( " 最大进料速率 " ) LCD_STR_A ; //"Vmax " max_feedrate_mm_s
PROGMEM Language_Str MSG_VMAX_B = _UxGT ( " 最大进料速率 " ) LCD_STR_B ; //"Vmax " max_feedrate_mm_s
PROGMEM Language_Str MSG_VMAX_C = _UxGT ( " 最大进料速率 " ) LCD_STR_C ; //"Vmax " max_feedrate_mm_s
PROGMEM Language_Str MSG_VMAX_E = _UxGT ( " 最大进料速率 " ) LCD_STR_E ; //"Vmax " max_feedrate_mm_s
2019-11-14 20:30:30 -06:00
PROGMEM Language_Str MSG_VMAX_EN = _UxGT ( " 最大进料速率 * " ) ; //"Vmax " max_feedrate_mm_s
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_VMIN = _UxGT ( " 最小进料速率 " ) ; //"Vmin" min_feedrate_mm_s
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT ( " 最小移动速率 " ) ; //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move
PROGMEM Language_Str MSG_ACCELERATION = _UxGT ( " 加速度 " ) ; // "Acceleration"
PROGMEM Language_Str MSG_AMAX_A = _UxGT ( " 最大打印加速度 " ) LCD_STR_A ; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
PROGMEM Language_Str MSG_AMAX_B = _UxGT ( " 最大打印加速度 " ) LCD_STR_B ; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
PROGMEM Language_Str MSG_AMAX_C = _UxGT ( " 最大打印加速度 " ) LCD_STR_C ; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
PROGMEM Language_Str MSG_AMAX_E = _UxGT ( " 最大打印加速度 " ) LCD_STR_E ; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
2019-11-14 20:30:30 -06:00
PROGMEM Language_Str MSG_AMAX_EN = _UxGT ( " 最大打印加速度 * " ) ; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_A_RETRACT = _UxGT ( " 收进加速度 " ) ; //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT ( " 非打印移动加速度 " ) ; //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT ( " 频率最大 " ) ;
PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT ( " 进给速度 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT ( " 轴步数/mm " ) ; //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92
2020-07-19 17:23:52 -05:00
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT ( " 步数/mm " ) ; //"Asteps/mm"
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT ( " 步数/mm " ) ; //"Bsteps/mm"
PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT ( " 步数/mm " ) ; //"Csteps/mm"
PROGMEM Language_Str MSG_E_STEPS = _UxGT ( " E 步数/mm " ) ; //"Esteps/mm"
PROGMEM Language_Str MSG_EN_STEPS = _UxGT ( " * 步数/mm " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT ( " 温度 " ) ; //"Temperature"
PROGMEM Language_Str MSG_MOTION = _UxGT ( " 运动 " ) ; //"Motion"
2020-07-08 01:15:05 -05:00
PROGMEM Language_Str MSG_FILAMENT = _UxGT ( " 料丝 " ) ; //"Filament" menu_advanced_filament
2020-07-19 17:23:52 -05:00
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT ( " E 在 mm³ " ) ; //"E in mm3" volumetric_enabled
PROGMEM Language_Str MSG_VOLUMETRIC_LIMIT = _UxGT ( " E 限制 在 mm³ " ) ;
PROGMEM Language_Str MSG_VOLUMETRIC_LIMIT_E = _UxGT ( " E 限制 * " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT ( " 丝料直径 " ) ; //"Fil. Dia."
2019-11-14 20:30:30 -06:00
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT ( " 丝料直径 * " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT ( " 卸载 mm " ) ; // "Unload mm"
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT ( " 装载 mm " ) ; // "Load mm"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT ( " Advance K " ) ;
PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT ( " Advance K * " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_CONTRAST = _UxGT ( " LCD对比度 " ) ; //"LCD contrast"
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT ( " 保存设置 " ) ; //"Store memory"
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT ( " 装载设置 " ) ; //"Load memory"
2020-02-26 02:02:20 -06:00
PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT ( " 恢复安全值 " ) ; //"Restore Defaults"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT ( " 初始化设置 " ) ; // "Initialize EEPROM"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT ( " EEPROM CRC 错误 " ) ;
PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT ( " EEPROM Index 错误 " ) ;
PROGMEM Language_Str MSG_ERR_EEPROM_VERSION = _UxGT ( " EEPROM Version 错误 " ) ;
PROGMEM Language_Str MSG_SETTINGS_STORED = _UxGT ( " 设置已保存 " ) ;
PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT ( " 存储器更新 " ) ;
PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT ( " 复位打印机 " ) ;
2020-07-08 01:15:05 -05:00
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT ( " 刷新 " ) ;
2020-01-03 19:46:05 -06:00
PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT ( " 信息屏 " ) ; //"Info screen"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_PREPARE = _UxGT ( " 准备 " ) ; //"Prepare"
PROGMEM Language_Str MSG_TUNE = _UxGT ( " 调整 " ) ; //"Tune"
2020-07-08 01:15:05 -05:00
PROGMEM Language_Str MSG_POWER_MONITOR = _UxGT ( " 电源监控 " ) ;
PROGMEM Language_Str MSG_CURRENT = _UxGT ( " 电流 " ) ;
PROGMEM Language_Str MSG_VOLTAGE = _UxGT ( " 电压 " ) ;
PROGMEM Language_Str MSG_POWER = _UxGT ( " 功率 " ) ;
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_START_PRINT = _UxGT ( " 开始打印 " ) ;
PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT ( " 下一个 " ) ;
PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT ( " 初始 " ) ;
PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT ( " 停止 " ) ;
PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT ( " 打印 " ) ;
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT ( " 复位 " ) ;
PROGMEM Language_Str MSG_BUTTON_IGNORE = _UxGT ( " 忽略 " ) ;
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT ( " 取消 " ) ;
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT ( " 完成 " ) ;
PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT ( " 返回 " ) ;
PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT ( " 继续 " ) ;
PROGMEM Language_Str MSG_PAUSING = _UxGT ( " 暂停中... " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT ( " 暂停打印 " ) ; //"Pause print"
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT ( " 恢复打印 " ) ; //"Resume print"
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT ( " 停止打印 " ) ; //"Stop print"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT ( " 打印物体 " ) ;
PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT ( " 取消物体 " ) ;
PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT ( " 取消物体 = " ) ;
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT ( " 中断恢复 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT ( " 从存储卡上打印 " ) ; //"Print from SD"
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT ( " 无存储卡 " ) ; //"No SD card"
PROGMEM Language_Str MSG_DWELL = _UxGT ( " 休眠中 ... " ) ; //"Sleep..."
PROGMEM Language_Str MSG_USERWAIT = _UxGT ( " 点击继续 ... " ) ; //"Click to resume..."
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT ( " 暫停打印 " ) ; // "Print paused"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_PRINTING = _UxGT ( " 打印中... " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT ( " 已取消打印 " ) ; //"Print aborted"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_PRINT_DONE = _UxGT ( " 打印已完成 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_NO_MOVE = _UxGT ( " 无移动 " ) ; //"No move."
PROGMEM Language_Str MSG_KILLED = _UxGT ( " 已杀掉 " ) ; //"KILLED. "
PROGMEM Language_Str MSG_STOPPED = _UxGT ( " 已停止 " ) ; //"STOPPED. "
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT ( " 回抽长度mm " ) ; //"Retract mm" retract_length, retract length (positive mm)
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT ( " 换手回抽长度mm " ) ; //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT ( " 回抽速率mm/s " ) ; //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT ( " Hop mm " ) ; //"Hop mm" retract_zraise, retract Z-lift
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT ( " 回抽恢复长度mm " ) ; //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering)
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT ( " 换手回抽恢复长度mm " ) ; //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change)
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT ( " 回抽恢复后进料速率mm/s " ) ; //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT ( " S UnRet V " ) ; // "S UnRet V"
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT ( " 自动抽回 " ) ; //"AutoRetr." autoretract_enabled,
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT ( " 交换长度 " ) ;
PROGMEM Language_Str MSG_FILAMENT_SWAP_EXTRA = _UxGT ( " 额外的交换 " ) ;
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT ( " 清洗长度 " ) ;
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT ( " 换工具 " ) ;
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT ( " Z抬起 " ) ;
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT ( " 进给速度 " ) ;
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT ( " 回抽速度 " ) ;
PROGMEM Language_Str MSG_FILAMENT_PARK_ENABLED = _UxGT ( " 停靠头 " ) ;
PROGMEM Language_Str MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT ( " 恢复速度 " ) ;
PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_SPEED = _UxGT ( " 风扇速度 " ) ;
PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_TIME = _UxGT ( " 风扇时间 " ) ;
PROGMEM Language_Str MSG_TOOL_MIGRATION_ON = _UxGT ( " 自动开 " ) ;
PROGMEM Language_Str MSG_TOOL_MIGRATION_OFF = _UxGT ( " 自动关 " ) ;
2020-07-19 17:23:52 -05:00
PROGMEM Language_Str MSG_TOOL_MIGRATION = _UxGT ( " 工具迁移 " ) ;
PROGMEM Language_Str MSG_TOOL_MIGRATION_AUTO = _UxGT ( " 自动迁移 " ) ;
PROGMEM Language_Str MSG_TOOL_MIGRATION_END = _UxGT ( " 上一个挤出机 " ) ;
PROGMEM Language_Str MSG_TOOL_MIGRATION_SWAP = _UxGT ( " 迁移至 * " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT ( " 更换丝料 " ) ; //"Change filament"
2019-11-14 20:30:30 -06:00
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT ( " 更换丝料 * " ) ; //"Change filament"
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT ( " 装载丝料 " ) ; // "Load filament"
PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT ( " 装载丝料 * " ) ; // "Load filament"
PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT ( " 卸载丝料 " ) ; // "Unload filament"
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT ( " 卸载丝料 * " ) ; // "Unload filament"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT ( " 卸载全部 " ) ; // "Unload All"
2020-02-24 05:33:16 -06:00
PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT ( " 初始化存储卡 " ) ; //"Init. SD card"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT ( " 更换存储卡 " ) ; //"Change SD card"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT ( " 释放存储卡 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT ( " Z探针在热床之外 " ) ; //"Z probe out. bed" Z probe is not within the physical limits
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT ( " 偏斜因数 " ) ; // "Skew Factor"
PROGMEM Language_Str MSG_BLTOUCH = _UxGT ( " BLTouch " ) ; // "BLTouch"
2020-07-18 17:41:47 -05:00
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT ( " 自检 " ) ;
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT ( " 重置 " ) ;
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT ( " 装载 " ) ;
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT ( " 部署 " ) ;
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT ( " SW模式 " ) ;
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT ( " 5V模式 " ) ;
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT ( " OD模式 " ) ;
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT ( " 模式保存 " ) ;
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT ( " 设置BLTouch为5V " ) ;
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT ( " 设置BLTouch为OD " ) ;
2020-07-19 17:23:52 -05:00
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT ( " 报告开漏 " ) ;
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE = _UxGT ( " 危险: 错误的设置将引起损坏! 是否继续? " ) ;
PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT ( " TouchMI " ) ;
PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT ( " 初始化TouchMI " ) ;
PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT ( " Z偏移量测试 " ) ;
PROGMEM Language_Str MSG_TOUCHMI_SAVE = _UxGT ( " 保存 " ) ;
PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT ( " 部署TouchMI " ) ;
PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT ( " 部署Z探针 " ) ;
PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT ( " 收好Z探针 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT ( " 归位 %s%s%s 先 " ) ; //"Home ... first"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ZPROBE_OFFSETS = _UxGT ( " 探针偏移量 " ) ;
2020-06-13 16:34:05 -05:00
PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT ( " 探针X偏移 " ) ;
PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT ( " 探针Y偏移 " ) ;
PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT ( " 探针Z偏移 " ) ; //"Z Offset"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT ( " 微量调整X轴 " ) ; //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT ( " 微量调整Y轴 " ) ; //"Babystep Y"
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT ( " 微量调整Z轴 " ) ; //"Babystep Z"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT ( " 总计 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT ( " 挡块终止 " ) ; //"Endstop abort"
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT ( " 加热失败 " ) ; //"Heating failed"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT ( " 错误：冗余温度 " ) ; //"Err: REDUNDANT TEMP"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT ( " 温控失控 " ) ; //"THERMAL RUNAWAY"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT ( " 热床热量失控 " ) ;
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT ( " 机箱热量失控 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT ( " 错误：最高温度 " ) ; //"Err: MAXTEMP"
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT ( " 错误：最低温度 " ) ; //"Err: MINTEMP"
PROGMEM Language_Str MSG_HALTED = _UxGT ( " 打印停机 " ) ; //"PRINTER HALTED"
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT ( " 请重置 " ) ; //"Please reset"
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT ( " 天 " ) ; //"d" // One character only
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT ( " 时 " ) ; //"h" // One character only
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT ( " 分 " ) ; //"m" // One character only
PROGMEM Language_Str MSG_HEATING = _UxGT ( " 加热中 ... " ) ; //"Heating..."
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_COOLING = _UxGT ( " 冷却中 ... " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_BED_HEATING = _UxGT ( " 加热热床中 ... " ) ; //"Bed Heating..."
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_BED_COOLING = _UxGT ( " 热床冷却中 ... " ) ;
PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT ( " 机箱加热中 ... " ) ;
PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT ( " 机箱冷却中 ... " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT ( " ⊿校准 " ) ; //"Delta Calibration"
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT ( " ⊿校准X " ) ; //"Calibrate X"
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT ( " ⊿校准Y " ) ; //"Calibrate Y"
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT ( " ⊿校准Z " ) ; //"Calibrate Z"
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT ( " ⊿校准中心 " ) ; //"Calibrate Center"
PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT ( " ⊿设置 " ) ; // "Delta Settings"
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT ( " ⊿自动校准 " ) ; // "Auto Calibration"
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT ( " 设置⊿高度 " ) ; // "Set Delta Height"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_DELTA_Z_OFFSET_CALIBRATE = _UxGT ( " 探针Z偏移量 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT ( " ⊿斜柱 " ) ; // "Diag Rod"
PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT ( " ⊿高度 " ) ; // "Height"
PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT ( " ⊿半径 " ) ; // "Radius"
PROGMEM Language_Str MSG_INFO_MENU = _UxGT ( " 关于打印机 " ) ; //"About Printer"
PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT ( " 打印机信息 " ) ; //"Printer Info"
PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT ( " 三点调平 " ) ; // "3-Point Leveling"
PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT ( " 线性调平 " ) ; // "Linear Leveling"
PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT ( " 双线性调平 " ) ; // "Bilinear Leveling"
PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT ( " 统一热床调平(UBL) " ) ; // "Unified Bed Leveling"
PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT ( " 网格调平 " ) ; // "Mesh Leveling"
PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT ( " 打印机统计 " ) ; //"Printer Stats"
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT ( " 主板信息 " ) ; //"Board Info"
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT ( " 温度计 " ) ; //"Thermistors"
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT ( " 挤出机 " ) ; //"Extruders"
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT ( " 波特率 " ) ; //"Baud"
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT ( " 协议 " ) ; //"Protocol"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT ( " 监控温度失控:关 " ) ;
PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT ( " 监控温度失控:开 " ) ;
PROGMEM Language_Str MSG_HOTEND_IDLE_TIMEOUT = _UxGT ( " 热端空闲超时 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT ( " 外壳灯 " ) ; // "Case light"
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT ( " 灯亮度 " ) ; // "Light BRIGHTNESS"
2016-12-12 09:18:53 -06:00
2020-04-13 14:53:21 -05:00
PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER = _UxGT ( " 打印机不正确 " ) ; // "The printer is incorrect"
2019-08-13 23:38:45 -05:00
2019-10-09 19:46:10 -05:00
# if LCD_WIDTH >= 20
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT ( " 打印计数 " ) ; //"Print Count"
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT ( " 完成了 " ) ; //"Completed"
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT ( " 总打印时间 " ) ; //"Total print time"
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT ( " 最长工作时间 " ) ; //"Longest job time"
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT ( " 总计挤出 " ) ; //"Extruded total"
# else
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT ( " 打印数 " ) ; //"Prints"
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT ( " 完成 " ) ; //"Completed"
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT ( " 总共 " ) ; //"Total"
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT ( " 最长 " ) ; //"Longest"
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT ( " 已挤出 " ) ; //"Extruded"
# endif
2016-12-12 09:18:53 -06:00
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT ( " 最低温度 " ) ; //"Min Temp"
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT ( " 最高温度 " ) ; //"Max Temp"
PROGMEM Language_Str MSG_INFO_PSU = _UxGT ( " 电源供应 " ) ; //"Power Supply"
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT ( " 驱动力度 " ) ; // "Drive Strength"
2019-12-10 23:37:25 -06:00
PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT ( " X 驱动 % " ) ; // "X Driver %"
PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT ( " Y 驱动 % " ) ; // "Y Driver %"
PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT ( " Z 驱动 % " ) ; // "Z Driver %"
PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT ( " E 驱动 % " ) ; // "E Driver %"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ERROR_TMC = _UxGT ( " TMC 连接错误 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT ( " 保存驱动设置 " ) ; // "DAC EEPROM Write"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT ( " 更换料 " ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT ( " 打印已暂停 " ) ; // "PRINT PAUSED"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT ( " 装载丝料 " ) ; // "LOAD FILAMENT"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT ( " 卸载丝料 " ) ; // "UNLOAD FILAMENT"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT ( " 恢复选项: " ) ; // "RESUME OPTIONS:"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT ( " 清除更多 " ) ; // "Purge more"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT ( " 恢复打印 " ) ; //"Resume print"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT ( " 喷嘴: " ) ; // " Nozzle: "
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT ( " 断料传感器 " ) ;
PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT ( " 断料距离mm " ) ;
2020-04-13 14:53:21 -05:00
PROGMEM Language_Str MSG_KILL_HOMING_FAILED = _UxGT ( " 归原位失败 " ) ; // "Homing failed"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT ( " 探针探测失败 " ) ; // "Probing failed"
2016-12-12 09:18:53 -06:00
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT ( " 选择料 " ) ;
PROGMEM Language_Str MSG_MMU2_MENU = _UxGT ( " MMU " ) ;
PROGMEM Language_Str MSG_KILL_MMU2_FIRMWARE = _UxGT ( " 升级MMU固件! " ) ;
PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT ( " MMU需要专注. " ) ;
PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT ( " MMU恢复 " ) ;
PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT ( " MMU恢复中... " ) ;
PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT ( " MMU加载 " ) ;
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT ( " MMU加载全部 " ) ;
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT ( " MMU加载到喷嘴 " ) ;
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT ( " MMU弹出 " ) ;
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT ( " MMU弹出 ~ " ) ;
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT ( " MMU卸载 " ) ;
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT ( " 加载填充. %i... " ) ;
PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT ( " 弹出填充. ... " ) ;
PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT ( " 卸载填充.... " ) ;
PROGMEM Language_Str MSG_MMU2_ALL = _UxGT ( " 全部 " ) ;
PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT ( " 料 ~ " ) ;
PROGMEM Language_Str MSG_MMU2_RESET = _UxGT ( " 复位MMU " ) ;
PROGMEM Language_Str MSG_MMU2_RESETTING = _UxGT ( " MMU复位中... " ) ;
PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT ( " 移出, 按下 " ) ;
PROGMEM Language_Str MSG_MIX = _UxGT ( " 混合 " ) ;
PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT ( " 器件 = " ) ;
PROGMEM Language_Str MSG_MIXER = _UxGT ( " 混合器 " ) ;
PROGMEM Language_Str MSG_GRADIENT = _UxGT ( " 梯度 " ) ;
PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT ( " 全梯度 " ) ;
PROGMEM Language_Str MSG_TOGGLE_MIX = _UxGT ( " 开关混合 " ) ;
PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT ( " 循环混合 " ) ;
PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT ( " 梯度混合 " ) ;
PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT ( " 反向梯度 " ) ;
PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT ( " 激活 V-tool " ) ;
PROGMEM Language_Str MSG_START_VTOOL = _UxGT ( " 开始 V-tool " ) ;
PROGMEM Language_Str MSG_END_VTOOL = _UxGT ( " 结束 V-tool " ) ;
PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT ( " 别名 V-tool " ) ;
PROGMEM Language_Str MSG_RESET_VTOOLS = _UxGT ( " 复位 V-tools " ) ;
PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT ( " 提交 V-tool Mix " ) ;
PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT ( " V-tools 已复位 " ) ;
PROGMEM Language_Str MSG_START_Z = _UxGT ( " 开始 Z: " ) ;
PROGMEM Language_Str MSG_END_Z = _UxGT ( " 结束 Z: " ) ;
PROGMEM Language_Str MSG_GAMES = _UxGT ( " 游戏 " ) ;
PROGMEM Language_Str MSG_BRICKOUT = _UxGT ( " 敲方块 " ) ;
PROGMEM Language_Str MSG_INVADERS = _UxGT ( " 入侵者 " ) ;
PROGMEM Language_Str MSG_SNAKE = _UxGT ( " 贪吃蛇 " ) ;
PROGMEM Language_Str MSG_MAZE = _UxGT ( " 迷宫 " ) ;
PROGMEM Language_Str MSG_BAD_PAGE = _UxGT ( " 错误页面索引 " ) ;
PROGMEM Language_Str MSG_BAD_PAGE_SPEED = _UxGT ( " 错误页面速度 " ) ;
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
2019-10-09 19:46:10 -05:00
# if LCD_HEIGHT >= 4
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT ( MSG_2_LINE ( " 按下按钮 " , " 恢复打印 " ) ) ;
PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT ( MSG_1_LINE ( " 停靠中... " ) ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT ( MSG_3_LINE ( " 等待开始 " , " 丝料 " , " 变更 " ) ) ; // "Wait for start of the filament change"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT ( MSG_3_LINE ( " 插入料 " , " 并按下 " , " 以继续 " ) ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT ( MSG_2_LINE ( " 按下按钮来 " , " 加热喷嘴. " ) ) ; // "Press button to heat nozzle."
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT ( MSG_2_LINE ( " 加热喷嘴 " , " 请等待 ... " ) ) ; // "Heating nozzle Please wait..."
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT ( MSG_2_LINE ( " 等待 " , " 卸下丝料 " ) ) ; // "Wait for filament unload"
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT ( MSG_2_LINE ( " 等待 " , " 进料 " ) ) ; // "Wait for filament load"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT ( MSG_2_LINE ( " 等待 " , " 丝料清除 " ) ) ; // "Wait for filament purge"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT ( MSG_2_LINE ( " 按下已完成 " , " 料的清洗 " ) ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT ( MSG_2_LINE ( " 等待打印 " , " 恢复 " ) ) ; // "Wait for print to resume"
# else
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT ( MSG_1_LINE ( " 按下继续 " ) ) ;
PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT ( MSG_1_LINE ( " 停靠中... " ) ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT ( MSG_1_LINE ( " 请等待 ... " ) ) ; //"Please wait..."
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT ( MSG_1_LINE ( " 插入并单击 " ) ) ; //"Insert and Click"
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT ( MSG_1_LINE ( " 按下加热 " ) ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT ( MSG_1_LINE ( " 加热中 ... " ) ) ; // "Heating..."
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT ( MSG_1_LINE ( " 退出中 ... " ) ) ; //"Ejecting..."
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT ( MSG_1_LINE ( " 装载中 ... " ) ) ; //"Loading..."
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT ( MSG_1_LINE ( " 清除中 ... " ) ) ; // "Purging..."
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT ( MSG_1_LINE ( " 按下完成 " ) ) ;
2019-10-09 19:46:10 -05:00
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT ( MSG_1_LINE ( " 恢复中 ... " ) ) ; //"Resuming..."
# endif
2020-06-07 19:43:30 -05:00
PROGMEM Language_Str MSG_TMC_DRIVERS = _UxGT ( " TMC驱动器 " ) ;
PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT ( " 驱动电流 " ) ;
PROGMEM Language_Str MSG_TMC_HYBRID_THRS = _UxGT ( " 混合阈值 " ) ;
PROGMEM Language_Str MSG_TMC_HOMING_THRS = _UxGT ( " 无感回零 " ) ;
PROGMEM Language_Str MSG_TMC_STEPPING_MODE = _UxGT ( " 步进模式 " ) ;
PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT ( " StealthChop已使能 " ) ;
PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT ( " 复位 " ) ;
PROGMEM Language_Str MSG_SERVICE_IN = _UxGT ( " 在: " ) ;
PROGMEM Language_Str MSG_BACKLASH = _UxGT ( " 回差 " ) ;
PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A ;
PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B ;
PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C ;
PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT ( " 校正 " ) ;
PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT ( " 平滑的 " ) ;
PROGMEM Language_Str MSG_LEVEL_X_AXIS = _UxGT ( " X轴调平 " ) ;
PROGMEM Language_Str MSG_AUTO_CALIBRATE = _UxGT ( " 自动校准 " ) ;
PROGMEM Language_Str MSG_HEATER_TIMEOUT = _UxGT ( " 加热器超时 " ) ;
PROGMEM Language_Str MSG_REHEAT = _UxGT ( " 重新加热 " ) ;
PROGMEM Language_Str MSG_REHEATING = _UxGT ( " 重新加热中... " ) ;
2019-10-09 19:46:10 -05:00
}
2020-06-07 19:43:30 -05:00
# if FAN_COUNT == 1
# define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED
2020-10-04 14:29:02 -05:00
# define MSG_EXTRA_FIRST_FAN_SPEED MSG_EXTRA_FAN_SPEED
2020-06-07 19:43:30 -05:00
# else
# define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED_N
2020-10-04 14:29:02 -05:00
# define MSG_EXTRA_FIRST_FAN_SPEED MSG_EXTRA_FAN_SPEED_N
2020-06-07 19:43:30 -05:00
# endif
