Marlin_Firmware/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * The class Servo uses the PWM class to implement its functions
 *
 * The PWM1 module is only used to generate interrups at specified times. It
 * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
 * that interrupt
 *
 * All PWMs use the same repetition rate - 20mS because that's the normal servo rate
 *
 */

#ifndef LPC1768_SERVO_H
#define LPC1768_SERVO_H

#include <inttypes.h>

class Servo {
  public:
    Servo();
    int8_t attach(int pin);            // attach the given pin to the next free channel, set pinMode, return channel number (-1 on fail)
    int8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes.
    void detach();
    void write(int value);             // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds
    void writeMicroseconds(int value); // write pulse width in microseconds
    void move(int value);              // attach the servo, then move to value
                                       // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds
                                       // if DEACTIVATE_SERVOS_AFTER_MOVE wait SERVO_DELAY, then detach
    int read();                        // returns current pulse width as an angle between 0 and 180 degrees
    int readMicroseconds();            // returns current pulse width in microseconds for this servo (was read_us() in first release)
    bool attached();                   // return true if this servo is attached, otherwise false

  private:
    uint8_t servoIndex;               // index into the channel data for this servo
    int min;
    int max;
};

#define HAL_SERVO_LIB Servo

#endif // LPC1768_SERVO_H