Marlin_Firmware/Marlin/src/module/thermistor/thermistor_20.h

101 lines
2.7 KiB
C
Raw Normal View History

2016-12-19 16:27:39 -06:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// PT100 with INA826 amp on Ultimaker v2.0 electronics
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
// This does not match the normal thermistor behaviour so we need to set the following defines
2017-06-15 15:14:08 -05:00
#if THERMISTORHEATER_0 == 20
2016-12-19 16:27:39 -06:00
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0
#endif
2017-06-15 15:14:08 -05:00
#if THERMISTORHEATER_1 == 20
2016-12-19 16:27:39 -06:00
#define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0
#endif
2017-06-15 15:14:08 -05:00
#if THERMISTORHEATER_2 == 20
2016-12-19 16:27:39 -06:00
#define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0
#endif
2017-06-15 15:14:08 -05:00
#if THERMISTORHEATER_3 == 20
2016-12-19 16:27:39 -06:00
#define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0
#endif
2017-06-15 15:14:08 -05:00
#if THERMISTORHEATER_4 == 20
#define HEATER_4_RAW_HI_TEMP 16383
#define HEATER_4_RAW_LO_TEMP 0
#endif
2017-06-15 15:14:08 -05:00
#if THERMISTORBED == 20
2016-12-19 16:27:39 -06:00
#define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0
#endif
const short temptable_20[][2] PROGMEM = {
{ OV( 0), 0 },
{ OV(227), 1 },
{ OV(236), 10 },
{ OV(245), 20 },
{ OV(253), 30 },
{ OV(262), 40 },
{ OV(270), 50 },
{ OV(279), 60 },
{ OV(287), 70 },
{ OV(295), 80 },
{ OV(304), 90 },
{ OV(312), 100 },
{ OV(320), 110 },
{ OV(329), 120 },
{ OV(337), 130 },
{ OV(345), 140 },
{ OV(353), 150 },
{ OV(361), 160 },
{ OV(369), 170 },
{ OV(377), 180 },
{ OV(385), 190 },
{ OV(393), 200 },
{ OV(401), 210 },
{ OV(409), 220 },
{ OV(417), 230 },
{ OV(424), 240 },
{ OV(432), 250 },
{ OV(440), 260 },
{ OV(447), 270 },
{ OV(455), 280 },
{ OV(463), 290 },
{ OV(470), 300 },
{ OV(478), 310 },
{ OV(485), 320 },
{ OV(493), 330 },
{ OV(500), 340 },
{ OV(507), 350 },
{ OV(515), 360 },
{ OV(522), 370 },
{ OV(529), 380 },
{ OV(537), 390 },
{ OV(544), 400 },
{ OV(614), 500 },
{ OV(681), 600 },
{ OV(744), 700 },
{ OV(805), 800 },
{ OV(862), 900 },
{ OV(917), 1000 },
{ OV(968), 1100 }
2016-12-19 16:27:39 -06:00
};