Marlin_Firmware/Marlin/src/pins/pins_TEENSY31_32.h

112 lines
3.2 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/****************************************************************************************
* Teensy 3.1 (MK20DX256) and Teensy 3.2 (MK20DX256) Breadboard pin assignments
* Requires the Teensyduino software with Teensy 3.1 or Teensy 3.2 selected in Arduino IDE!
* http://www.pjrc.com/teensy/teensyduino.html
****************************************************************************************/
#if !IS_32BIT_TEENSY
#error "Oops! Make sure you have 'Teensy 3.1' or 'Teensy 3.2' selected from the 'Tools -> Boards' menu."
#endif
#if IS_TEENSY32
#define BOARD_NAME "Teensy3.2"
#endif
#define AT90USB 1286 // Disable MarlinSerial etc.
#define USBCON //1286 // Disable MarlinSerial etc.
//
// Limit Switches
//
#define X_STOP_PIN 3
#define Y_STOP_PIN 4
#define Z_STOP_PIN 5
//
// Steppers
//
#define X_STEP_PIN 5
#define X_DIR_PIN 6
#define X_ENABLE_PIN 2
#define Y_STEP_PIN 7
#define Y_DIR_PIN 8
#define Y_ENABLE_PIN 2
#define Z_STEP_PIN 9
#define Z_DIR_PIN 10
#define Z_ENABLE_PIN 2
#define E0_STEP_PIN 11
#define E0_DIR_PIN 12
#define E0_ENABLE_PIN 2
// #define E1_STEP_PIN 33
// #define E1_DIR_PIN 34
// #define E1_ENABLE_PIN 35
#define HEATER_0_PIN 20
// #define HEATER_1_PIN 36
#define HEATER_BED_PIN 21
#ifndef FAN_PIN
#define FAN_PIN 22
#endif
#define TEMP_0_PIN 14 // Extruder / Analog pin numbering: 2 => A2
// #define TEMP_1_PIN 0
#define TEMP_BED_PIN 15 // Bed / Analog pin numbering
// #define SDSS 16 // 8
#define LED_PIN 13
#define PS_ON_PIN -1
#define ALARM_PIN -1
// #define FILWIDTH_PIN 6
// #define SOL1_PIN 28
#if 0
// Pretty sure this is obsolete!
// Please use Marlin 1.1.x pins files as reference for new pins files.
#ifndef SDSUPPORT
// these are defined in the SD library if building with SD support
#define SCK_PIN 13
#define MISO_PIN 12
#define MOSI_PIN 11
#endif
#endif
/*
#ifdef ULTRA_LCD
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 41
#define LCD_PINS_D4 42
#define LCD_PINS_D5 43
#define LCD_PINS_D6 44
#define LCD_PINS_D7 45
#define BTN_EN1 46
#define BTN_EN2 47
#define BTN_ENC 48
#endif
*/