Marlin_Firmware/Marlin/src/pins/pins_THE_BORG.h

197 lines
6.0 KiB
C
Raw Normal View History

2018-01-11 15:29:08 -06:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if !defined(STM32F7)
#error "Oops! Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu."
#endif
#define DEFAULT_MACHINE_NAME "The-Borge"
#define BOARD_NAME "The-Borge"
#define LARGE_FLASH true
#define E2END 0xFFF // EEPROM end address
// Ignore temp readings during develpment.
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
#if E_STEPPERS > 3 || HOTENDS > 3
#error "The-Borg supports up to 3 hotends / E-steppers."
#endif
#define PORTA 0
#define PORTB 1
#define PORTC 2
#define PORTD 3
#define PORTE 4
#define PORTF 5
#define PORTG 6
#define _STM32_PIN(_PORT,_PIN) ((_PORT * 16) + _PIN)
//
// Limit Switches
//
#define X_MIN_PIN _STM32_PIN(PORTE, 9)
#define X_MAX_PIN _STM32_PIN(PORTE, 10)
#define Y_MIN_PIN _STM32_PIN(PORTE, 7)
#define Y_MAX_PIN _STM32_PIN(PORTE, 8)
2018-01-21 17:13:56 -06:00
#define Z_MIN_PIN _STM32_PIN(PORTF, 15)
2018-01-11 15:29:08 -06:00
#define Z_MAX_PIN _STM32_PIN(PORTG, 0)
2018-01-21 17:13:56 -06:00
#define E_MIN_PIN _STM32_PIN(PORTE, 2)
2018-01-11 15:29:08 -06:00
#define E_MAX_PIN _STM32_PIN(PORTE, 3)
2018-01-11 15:29:08 -06:00
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN _STM32_PIN(PORTA, 4)
#endif
//
// Steppers
//
#define STEPPER_ENABLE_PIN _STM32_PIN(PORTE, 0)
2018-01-15 02:29:23 -06:00
#define X_STEP_PIN _STM32_PIN(PORTC, 6) //96, 39 in arduino
2018-01-11 15:29:08 -06:00
#define X_DIR_PIN _STM32_PIN(PORTC, 7)
#define X_ENABLE_PIN _STM32_PIN(PORTC, 8)
#define Y_STEP_PIN _STM32_PIN(PORTD, 9)
#define Y_DIR_PIN _STM32_PIN(PORTD, 10)
#define Y_ENABLE_PIN _STM32_PIN(PORTD, 11)
#define Z_STEP_PIN _STM32_PIN(PORTE, 15)
#define Z_DIR_PIN _STM32_PIN(PORTG, 1)
#define Z_ENABLE_PIN _STM32_PIN(PORTD, 8)
#define E0_STEP_PIN _STM32_PIN(PORTB, 1)
#define E0_DIR_PIN _STM32_PIN(PORTB, 2)
#define E0_ENABLE_PIN _STM32_PIN(PORTE, 11)
#define E1_STEP_PIN _STM32_PIN(PORTC, 4)
#define E1_DIR_PIN _STM32_PIN(PORTC, 5)
#define E1_ENABLE_PIN _STM32_PIN(PORTB, 0)
#define E2_STEP_PIN _STM32_PIN(PORTC, 13)
#define E2_DIR_PIN _STM32_PIN(PORTC, 14)
#define E2_ENABLE_PIN _STM32_PIN(PORTC, 15)
#define Z2_STEP_PIN _STM32_PIN(PORTC, 13)
#define Z2_DIR_PIN _STM32_PIN(PORTC, 14)
#define Z2_ENABLE_PIN _STM32_PIN(PORTC, 15)
2018-01-15 02:29:23 -06:00
#define SCK_PIN _STM32_PIN(PORTA, 5)
#define MISO_PIN _STM32_PIN(PORTA, 6)
#define MOSI_PIN _STM32_PIN(PORTA, 7)
2018-01-11 15:29:08 -06:00
2018-01-15 02:29:23 -06:00
#define SPI1_SCK_PIN _STM32_PIN(PORTA, 5)
#define SPI1_MISO_PIN _STM32_PIN(PORTA, 6)
#define SPI1_MOSI_PIN _STM32_PIN(PORTA, 7)
2018-01-11 15:29:08 -06:00
2018-01-15 02:29:23 -06:00
#define SPI6_SCK_PIN _STM32_PIN(PORTG, 13)
#define SPI6_MISO_PIN _STM32_PIN(PORTG, 12)
#define SPI6_MOSI_PIN _STM32_PIN(PORTG, 14)
2018-01-11 15:29:08 -06:00
//
// Temperature Sensors
//
2018-01-15 02:29:23 -06:00
#define TEMP_0_PIN _STM32_PIN(PORTC, 3) // Analog Input
#define TEMP_1_PIN _STM32_PIN(PORTC, 2) // Analog Input
#define TEMP_2_PIN _STM32_PIN(PORTC, 1) // Analog Input
#define TEMP_3_PIN _STM32_PIN(PORTC, 0) // Analog Input
2018-01-11 15:29:08 -06:00
2018-01-15 02:29:23 -06:00
#define TEMP_BED_PIN _STM32_PIN(PORTF, 10) // Analog Input
2018-01-11 15:29:08 -06:00
2018-01-15 02:29:23 -06:00
#define TEMP_5_PIN _STM32_PIN(PORTE, 12) // Analog Input, Probe temp
2018-01-11 15:29:08 -06:00
//
// Heaters / Fans
//
2018-01-15 02:29:23 -06:00
#define HEATER_0_PIN _STM32_PIN(PORTD, 15)
#define HEATER_1_PIN _STM32_PIN(PORTD, 14)
#define HEATER_BED_PIN _STM32_PIN(PORTF, 6)
2018-01-11 15:29:08 -06:00
2018-01-15 02:29:23 -06:00
#define FAN_PIN _STM32_PIN(PORTD, 13)
#define FAN1_PIN _STM32_PIN(PORTA, 0)
#define FAN2_PIN _STM32_PIN(PORTA, 1)
2018-01-11 15:29:08 -06:00
#define ORIG_E0_AUTO_FAN_PIN _STM32_PIN(PORTA, 1) // Use this by NOT overriding E0_AUTO_FAN_PIN
2018-01-11 15:29:08 -06:00
//
// Misc. Functions
//
2018-01-15 02:29:23 -06:00
//#define CASE_LIGHT_PIN_CI _STM32_PIN(PORTF, 13) //
//#define CASE_LIGHT_PIN_DO _STM32_PIN(PORTF, 14) //
//#define NEOPIXEL_PIN _STM32_PIN(PORTF, 13)
2018-01-11 15:29:08 -06:00
//
// Prusa i3 MK2 Multi Material Multiplexer Support
//
2018-01-21 17:13:56 -06:00
#define E_MUX0_PIN _STM32_PIN(PORTG, 3)
2018-01-11 15:29:08 -06:00
#define E_MUX1_PIN _STM32_PIN(PORTG, 4)
//
// Servos
//
2018-01-21 17:13:56 -06:00
#define SERVO0_PIN _STM32_PIN(PORTE, 13)
#define SERVO1_PIN _STM32_PIN(PORTE, 14)
2018-01-11 15:29:08 -06:00
#define SDSS _STM32_PIN(PORTA, 8)
2018-01-15 02:29:23 -06:00
#define SS_PIN _STM32_PIN(PORTA, 8)
#define LED_PIN _STM32_PIN(PORTA, 2) //Alive
2018-01-11 15:29:08 -06:00
#define PS_ON_PIN _STM32_PIN(PORTA, 3)
2018-01-15 02:29:23 -06:00
#define KILL_PIN -1//_STM32_PIN(PORTD, 5) //EXP2-10
#define PWR_LOSS _STM32_PIN(PORTG, 5) //Power loss / nAC_FAULT
2018-01-11 15:29:08 -06:00
//
// MAX7219_DEBUG
2018-01-11 15:29:08 -06:00
//
2018-01-15 02:29:23 -06:00
#define MAX7219_CLK_PIN _STM32_PIN(PORTG, 10) //EXP1-1
#define MAX7219_DIN_PIN _STM32_PIN(PORTD, 7) //EXP1-3
#define MAX7219_LOAD_PIN _STM32_PIN(PORTD, 1) //EXP1-5
2018-01-11 15:29:08 -06:00
//
// LCD / Controller
//
2018-01-15 02:29:23 -06:00
//#define SD_DETECT_PIN -1 //_STM32_PIN(PORTB, 6)) //EXP2-4
#define BEEPER_PIN _STM32_PIN(PORTG, 10) //EXP1-1
#define LCD_PINS_RS _STM32_PIN(PORTG, 9) //EXP1-4
#define LCD_PINS_ENABLE _STM32_PIN(PORTD, 7) //EXP1-3
#define LCD_PINS_D4 _STM32_PIN(PORTD, 1) //EXP1-5
#define LCD_PINS_D5 _STM32_PIN(PORTF, 0) //EXP1-6
#define LCD_PINS_D6 _STM32_PIN(PORTD, 3) //EXP1-7
#define LCD_PINS_D7 _STM32_PIN(PORTD, 4) //EXP1-8
#define BTN_EN1 _STM32_PIN(PORTD, 6) //EXP2-5
#define BTN_EN2 _STM32_PIN(PORTD, 0) //EXP2-3
#define BTN_ENC _STM32_PIN(PORTG, 11) //EXP1-2