Marlin_Firmware/Marlin/src/pins/pins_AZTEEG_X5_GT.h

136 lines
3.2 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Azteeg X5 GT pin assignments
*/
#ifndef TARGET_LPC1768
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
2018-11-14 00:23:18 -06:00
#define BOARD_NAME "Azteeg X5 GT"
#define DEFAULT_WEBSITE_URL "https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm"
2018-08-21 23:58:26 -05:00
//
// Set CPU
//
#undef F_CPU
#define F_CPU 120000000
//
// Limit Switches
//
#define X_MIN_PIN P1_24
#define X_MAX_PIN P1_27
#define Y_MIN_PIN P1_25
#define Y_MAX_PIN P1_28
#define Z_MIN_PIN P1_26
#define Z_MAX_PIN P1_29
//
// Steppers
//
2017-11-18 12:57:32 -06:00
#define X_STEP_PIN P2_01
#define X_DIR_PIN P0_11
#define X_ENABLE_PIN P0_10
2018-10-06 17:18:10 -05:00
#ifndef X_CS_PIN
#define X_CS_PIN P0_10 // BSD2660 default
#endif
2017-11-18 12:57:32 -06:00
#define Y_STEP_PIN P2_02
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P0_19
2018-10-06 17:18:10 -05:00
#ifndef Y_CS_PIN
#define Y_CS_PIN P0_19 // BSD2660 default
#endif
2017-11-18 12:57:32 -06:00
#define Z_STEP_PIN P2_03
#define Z_DIR_PIN P0_22
#define Z_ENABLE_PIN P0_21
2018-10-06 17:18:10 -05:00
#ifndef Z_CS_PIN
#define Z_CS_PIN P0_21 // BSD2660 default
#endif
2017-11-18 12:57:32 -06:00
#define E0_STEP_PIN P2_00
#define E0_DIR_PIN P0_05
#define E0_ENABLE_PIN P0_04
2018-10-06 17:18:10 -05:00
#ifndef E0_CS_PIN
#define E0_CS_PIN P0_04 // BSD2660 default
#endif
2017-11-18 12:57:32 -06:00
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
2018-10-06 17:18:10 -05:00
#ifndef E1_CS_PIN
#define E1_CS_PIN P4_29 // BSD2660 default
#endif
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
2018-03-28 12:51:59 -05:00
#define TEMP_BED_PIN 0 // A0 (TH1)
#define TEMP_0_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3)
//
// Heaters / Fans
//
2017-11-18 12:57:32 -06:00
#define HEATER_BED_PIN P2_07
#define HEATER_0_PIN P2_04
#define HEATER_1_PIN P2_05
#ifndef FAN_PIN
#define FAN_PIN P0_26
#endif
#define FAN1_PIN P1_22
//
// Display
//
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN P1_31
#define DOGLCD_A0 P2_06
#define DOGLCD_CS P0_16
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P2_11
#define SD_DETECT_PIN P1_18
#define SDSS P1_21
#define STAT_LED_RED_PIN P1_19
#define STAT_LED_BLUE_PIN P1_20
#endif
//
// Servo
//
#define SERVO0_PIN P1_23