Marlin_Firmware/Marlin/ultralcd_implementation_hitachi_HD44780.h

799 lines
29 KiB
C
Raw Normal View History

#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
/**
* Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays.
* When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters.
**/
#ifndef REPRAPWORLD_KEYPAD
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#else
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
#endif
////////////////////////////////////
// Setup button and encode mappings for each panel (into 'buttons' variable
//
// This is just to map common functions (across different panels) onto the same
// macro name. The mapping is independent of whether the button is directly connected or
// via a shift/i2c register.
#ifdef ULTIPANEL
// All UltiPanels might have an encoder - so this is always be mapped onto first two bits
#define BLEN_B 1
#define BLEN_A 0
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
#define EN_A (1<<BLEN_A)
#if defined(BTN_ENC) && BTN_ENC > -1
// encoder click is directly connected
#define BLEN_C 2
#define EN_C (1<<BLEN_C)
#endif
//
// Setup other button mappings of each panel
//
#if defined(LCD_I2C_VIKI)
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
// button and encoder bit positions within 'buttons'
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
#if defined(BTN_ENC) && BTN_ENC > -1
// the pause/stop/restart button is connected to BTN_ENC when used
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
#else
#define LCD_CLICKED (buttons&(B_MI|B_RI))
#endif
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#elif defined(LCD_I2C_PANELOLU2)
// encoder click can be read through I2C if not directly connected
#if BTN_ENC <= 0
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
#define LCD_CLICKED (buttons&B_MI)
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#else
#define LCD_CLICKED (buttons&EN_C)
#endif
#elif defined(REPRAPWORLD_KEYPAD)
// define register bit values, don't change it
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
#elif defined(NEWPANEL)
#define LCD_CLICKED (buttons&EN_C)
#else // old style ULTIPANEL
//bits in the shift register that carry the buttons for:
// left up center down right red(stop)
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
//automatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
#define B_MI (1<<BL_MI)
#define B_DW (1<<BL_DW)
#define B_RI (1<<BL_RI)
#define B_ST (1<<BL_ST)
#define LCD_CLICKED (buttons&(B_MI|B_ST))
#endif
////////////////////////
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
// These values are independent of which pins are used for EN_A and EN_B indications
// The rotary encoder part is also independent to the chipset used for the LCD
#if defined(EN_A) && defined(EN_B)
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif
#endif //ULTIPANEL
////////////////////////////////////
// Create LCD class instance and chipset-specific information
#if defined(LCD_I2C_TYPE_PCF8575)
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
#define LCD_I2C_PIN_BL 3
#define LCD_I2C_PIN_EN 2
#define LCD_I2C_PIN_RW 1
#define LCD_I2C_PIN_RS 0
#define LCD_I2C_PIN_D4 4
#define LCD_I2C_PIN_D5 5
#define LCD_I2C_PIN_D6 6
#define LCD_I2C_PIN_D7 7
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
#elif defined(LCD_I2C_TYPE_MCP23017)
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
#define LED_A 0x04 //100
#define LED_B 0x02 //010
#define LED_C 0x01 //001
#define LCD_HAS_STATUS_INDICATORS
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#elif defined(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#elif defined(LCD_I2C_TYPE_PCA8574)
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#elif defined(SR_LCD_2W_NL)
#include <LCD.h>
#include <LiquidCrystal_SR.h>
#define LCD_CLASS LiquidCrystal_SR
LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN);
#else
// Standard directly connected LCD implementations
#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
#include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal
#endif
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif
/* Custom characters defined in the first 8 characters of the LCD */
#define LCD_STR_BEDTEMP "\x00"
#define LCD_STR_DEGREE "\x01"
#define LCD_STR_THERMOMETER "\x02"
#define LCD_STR_UPLEVEL "\x03"
#define LCD_STR_REFRESH "\x04"
#define LCD_STR_FOLDER "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_CLOCK "\x07"
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
static void lcd_implementation_init()
{
byte bedTemp[8] =
{
B00000,
B11111,
B10101,
B10001,
B10101,
B11111,
B00000,
B00000
}; //thanks Sonny Mounicou
byte degree[8] =
{
B01100,
B10010,
B10010,
B01100,
B00000,
B00000,
B00000,
B00000
};
byte thermometer[8] =
{
B00100,
B01010,
B01010,
B01010,
B01010,
B10001,
B10001,
B01110
};
byte uplevel[8]={
B00100,
B01110,
B11111,
B00100,
B11100,
B00000,
B00000,
B00000
}; //thanks joris
byte refresh[8]={
B00000,
B00110,
B11001,
B11000,
B00011,
B10011,
B01100,
B00000,
}; //thanks joris
byte folder [8]={
B00000,
B11100,
B11111,
B10001,
B10001,
B11111,
B00000,
B00000
}; //thanks joris
byte feedrate [8]={
B11100,
B10000,
B11000,
B10111,
B00101,
B00110,
B00101,
B00000
}; //thanks Sonny Mounicou
byte clock [8]={
B00000,
B01110,
B10011,
B10101,
B10001,
B01110,
B00000,
B00000
}; //thanks Sonny Mounicou
#if defined(LCD_I2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
lcd.setBacklight(HIGH);
#endif
#elif defined(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd.setBacklight(0); //set all the LEDs off to begin with
#elif defined(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#elif defined(LCD_I2C_TYPE_PCA8574)
lcd.init();
lcd.backlight();
#else
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#endif
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
lcd.createChar(LCD_STR_DEGREE[0], degree);
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
lcd.createChar(LCD_STR_REFRESH[0], refresh);
lcd.createChar(LCD_STR_FOLDER[0], folder);
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
lcd.createChar(LCD_STR_CLOCK[0], clock);
lcd.clear();
}
static void lcd_implementation_clear()
{
lcd.clear();
}
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
static void lcd_printPGM(const char* str)
{
char c;
while((c = pgm_read_byte(str++)) != '\0')
{
lcd.write(c);
}
}
/*
Possible status screens:
16x2 |0123456789012345|
|000/000 B000/000|
|Status line.....|
16x4 |0123456789012345|
|000/000 B000/000|
|SD100% Z000.0|
|F100% T--:--|
|Status line.....|
20x2 |01234567890123456789|
|T000/000D B000/000D |
|Status line.........|
20x4 |01234567890123456789|
|T000/000D B000/000D |
|X+000.0 Y+000.0 Z+000.0|
|F100% SD100% T--:--|
|Status line.........|
20x4 |01234567890123456789|
|T000/000D B000/000D |
|T000/000D Z000.0|
|F100% SD100% T--:--|
|Status line.........|
*/
static void lcd_implementation_status_screen()
{
int tHotend=int(degHotend(0) + 0.5);
int tTarget=int(degTargetHotend(0) + 0.5);
#if LCD_WIDTH < 20
lcd.setCursor(0, 0);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
//If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(8, 0);
# if EXTRUDERS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
# else//Heated bed
tHotend=int(degBed() + 0.5);
tTarget=int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
# endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
#else//LCD_WIDTH > 19
lcd.setCursor(0, 0);
lcd.print(LCD_STR_THERMOMETER[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10)
lcd.print(' ');
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
//If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(10, 0);
# if EXTRUDERS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
# else//Heated bed
tHotend=int(degBed() + 0.5);
tTarget=int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
# endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10)
lcd.print(' ');
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
#endif//LCD_WIDTH > 19
#if LCD_HEIGHT > 2
//Lines 2 for 4 line LCD
# if LCD_WIDTH < 20
# ifdef SDSUPPORT
lcd.setCursor(0, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
lcd.print(itostr3(card.percentDone()));
else
lcd_printPGM(PSTR("---"));
lcd.print('%');
# endif//SDSUPPORT
# else//LCD_WIDTH > 19
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
tHotend=int(degBed() + 0.5);
tTarget=int(degTargetBed() + 0.5);
lcd.setCursor(0, 1);
lcd.print(LCD_STR_BEDTEMP[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10)
lcd.print(' ');
# else
lcd.setCursor(0,1);
lcd.print('X');
lcd.print(ftostr3(current_position[X_AXIS]));
lcd_printPGM(PSTR(" Y"));
lcd.print(ftostr3(current_position[Y_AXIS]));
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
# endif//LCD_WIDTH > 19
lcd.setCursor(LCD_WIDTH - 8, 1);
lcd.print('Z');
lcd.print(ftostr32(current_position[Z_AXIS] + 0.00001));
#endif//LCD_HEIGHT > 2
#if LCD_HEIGHT > 3
lcd.setCursor(0, 2);
lcd.print(LCD_STR_FEEDRATE[0]);
lcd.print(itostr3(feedmultiply));
lcd.print('%');
# if LCD_WIDTH > 19
# ifdef SDSUPPORT
lcd.setCursor(7, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
lcd.print(itostr3(card.percentDone()));
else
lcd_printPGM(PSTR("---"));
lcd.print('%');
# endif//SDSUPPORT
# endif//LCD_WIDTH > 19
lcd.setCursor(LCD_WIDTH - 6, 2);
lcd.print(LCD_STR_CLOCK[0]);
if(starttime != 0)
{
uint16_t time = millis()/60000 - starttime/60000;
lcd.print(itostr2(time/60));
lcd.print(':');
lcd.print(itostr2(time%60));
}else{
lcd_printPGM(PSTR("--:--"));
}
#endif
//Display both Status message line and Filament display on the last line
#ifdef FILAMENT_LCD_DISPLAY
if(message_millis+5000>millis()){ //display any status for the first 5 sec after screen is initiated
lcd.setCursor(0, LCD_HEIGHT - 1);
lcd.print(lcd_status_message);
} else {
lcd.setCursor(0,LCD_HEIGHT - 1);
lcd_printPGM(PSTR("Dia "));
lcd.print(ftostr12ns(filament_width_meas));
lcd_printPGM(PSTR(" V"));
lcd.print(itostr3(100.0*volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]));
lcd.print('%');
}
#else
lcd.setCursor(0, LCD_HEIGHT - 1);
lcd.print(lcd_status_message);
#endif
}
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
{
char c;
//Use all characters in narrow LCDs
#if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1;
#else
uint8_t n = LCD_WIDTH - 1 - 2;
#endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{
lcd.print(c);
pstr++;
n--;
}
while(n--)
lcd.print(' ');
lcd.print(post_char);
lcd.print(' ');
}
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
{
char c;
//Use all characters in narrow LCDs
#if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
#else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
#endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{
lcd.print(c);
pstr++;
n--;
}
lcd.print(':');
while(n--)
lcd.print(' ');
lcd.print(data);
}
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
{
char c;
//Use all characters in narrow LCDs
#if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
#else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
#endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{
lcd.print(c);
pstr++;
n--;
}
lcd.print(':');
while(n--)
lcd.print(' ');
lcd_printPGM(data);
}
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
//Add version for callback functions
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* pstr, char* value)
{
lcd.setCursor(1, 1);
lcd_printPGM(pstr);
lcd.print(':');
#if LCD_WIDTH < 20
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
#else
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
#endif
lcd.print(value);
}
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
uint8_t n = LCD_WIDTH - 1;
lcd.setCursor(0, row);
lcd.print('>');
if (longFilename[0] != '\0')
{
filename = longFilename;
longFilename[LCD_WIDTH-1] = '\0';
}
while( ((c = *filename) != '\0') && (n>0) )
{
lcd.print(c);
filename++;
n--;
}
while(n--)
lcd.print(' ');
}
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
uint8_t n = LCD_WIDTH - 1;
lcd.setCursor(0, row);
lcd.print(' ');
if (longFilename[0] != '\0')
{
filename = longFilename;
longFilename[LCD_WIDTH-1] = '\0';
}
while( ((c = *filename) != '\0') && (n>0) )
{
lcd.print(c);
filename++;
n--;
}
while(n--)
lcd.print(' ');
}
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
uint8_t n = LCD_WIDTH - 2;
lcd.setCursor(0, row);
lcd.print('>');
lcd.print(LCD_STR_FOLDER[0]);
if (longFilename[0] != '\0')
{
filename = longFilename;
longFilename[LCD_WIDTH-2] = '\0';
}
while( ((c = *filename) != '\0') && (n>0) )
{
lcd.print(c);
filename++;
n--;
}
while(n--)
lcd.print(' ');
}
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
uint8_t n = LCD_WIDTH - 2;
lcd.setCursor(0, row);
lcd.print(' ');
lcd.print(LCD_STR_FOLDER[0]);
if (longFilename[0] != '\0')
{
filename = longFilename;
longFilename[LCD_WIDTH-2] = '\0';
}
while( ((c = *filename) != '\0') && (n>0) )
{
lcd.print(c);
filename++;
n--;
}
while(n--)
lcd.print(' ');
}
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
static void lcd_implementation_quick_feedback()
{
#ifdef LCD_USE_I2C_BUZZER
#if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
lcd_buzz(1000/6,100);
#else
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS,LCD_FEEDBACK_FREQUENCY_HZ);
#endif
#elif defined(BEEPER) && BEEPER > -1
SET_OUTPUT(BEEPER);
2014-02-13 04:17:33 -06:00
#if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
for(int8_t i=0;i<10;i++)
{
WRITE(BEEPER,HIGH);
delayMicroseconds(100);
WRITE(BEEPER,LOW);
delayMicroseconds(100);
}
#else
2014-02-13 04:17:33 -06:00
for(int8_t i=0;i<(LCD_FEEDBACK_FREQUENCY_DURATION_MS / (1000 / LCD_FEEDBACK_FREQUENCY_HZ));i++)
{
WRITE(BEEPER,HIGH);
delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
WRITE(BEEPER,LOW);
delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
}
2014-02-13 04:17:33 -06:00
#endif
#endif
}
#ifdef LCD_HAS_STATUS_INDICATORS
static void lcd_implementation_update_indicators()
{
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
//set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0;
uint8_t leds = 0;
if (target_temperature_bed > 0) leds |= LED_A;
if (target_temperature[0] > 0) leds |= LED_B;
if (fanSpeed) leds |= LED_C;
#if EXTRUDERS > 1
if (target_temperature[1] > 0) leds |= LED_C;
#endif
if (leds != ledsprev) {
lcd.setBacklight(leds);
ledsprev = leds;
}
#endif
}
#endif
#ifdef LCD_HAS_SLOW_BUTTONS
extern uint32_t blocking_enc;
static uint8_t lcd_implementation_read_slow_buttons()
{
#ifdef LCD_I2C_TYPE_MCP23017
uint8_t slow_buttons;
// Reading these buttons this is likely to be too slow to call inside interrupt context
// so they are called during normal lcd_update
slow_buttons = lcd.readButtons() << B_I2C_BTN_OFFSET;
#if defined(LCD_I2C_VIKI)
if(slow_buttons & (B_MI|B_RI)) { //LCD clicked
if(blocking_enc > millis()) {
slow_buttons &= ~(B_MI|B_RI); // Disable LCD clicked buttons if screen is updated
}
}
#endif
return slow_buttons;
#endif
}
#endif
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H