Marlin_Firmware/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * Smoothieboard pin assignments
 */

#ifndef MCU_LPC1769
  #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif

#define BOARD_INFO_NAME   "Smoothieboard"
#define BOARD_WEBSITE_URL "smoothieware.org/smoothieboard"

//
// Servos
//
#define SERVO0_PIN                         P1_23

//
// Limit Switches
//
#define X_MIN_PIN                          P1_24
#define X_MAX_PIN                          P1_25
#define Y_MIN_PIN                          P1_26
#define Y_MAX_PIN                          P1_27
#define Z_MIN_PIN                          P1_28
#define Z_MAX_PIN                          P1_29

//
// Steppers
//
#define X_STEP_PIN                         P2_00
#define X_DIR_PIN                          P0_05
#define X_ENABLE_PIN                       P0_04

#define Y_STEP_PIN                         P2_01
#define Y_DIR_PIN                          P0_11
#define Y_ENABLE_PIN                       P0_10

#define Z_STEP_PIN                         P2_02
#define Z_DIR_PIN                          P0_20
#define Z_ENABLE_PIN                       P0_19

#define E0_STEP_PIN                        P2_03
#define E0_DIR_PIN                         P0_22
#define E0_ENABLE_PIN                      P0_21

#define E1_STEP_PIN                        P2_08
#define E1_DIR_PIN                         P2_13
#define E1_ENABLE_PIN                      P4_29

//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN                      P0_23_A0  // (T1)
#define TEMP_BED_PIN                    P0_24_A1  // (T2)
#define TEMP_1_PIN                      P0_25_A2  // (T3)
#define TEMP_2_PIN                      P0_26_A3  // (T4)

//
// Heaters / Fans
//
#define HEATER_BED_PIN                     P2_05
#define HEATER_0_PIN                       P2_07
#define HEATER_1_PIN                       P1_23
#ifndef FAN_PIN
  #define FAN_PIN                          P2_06
#endif
#define FAN1_PIN                           P2_04

//
// LCD / Controller
//
#if ANY(VIKI2, miniVIKI)

  #define BEEPER_PIN                       P1_31
  #define DOGLCD_A0                        P2_11
  #define DOGLCD_CS                        P0_16

  #define BTN_EN1                          P3_25
  #define BTN_EN2                          P3_26
  #define BTN_ENC                          P1_30

  #define SD_DETECT_PIN                    P1_18
  #define SDSS                             P1_21

  #define STAT_LED_RED_PIN                 P1_19
  #define STAT_LED_BLUE_PIN                P1_20

#elif HAS_SPI_LCD

  /*
    The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either
    a custom cable with breakouts to the pins indicated below or the RRD GLCD Adapter board
    found at http://smoothieware.org/rrdglcdadapter

    Other links to information about setting up a display panel with Smoothieboard
    http://chibidibidiwah.wdfiles.com/local--files/panel/smoothieboard2sd.jpg
    http://smoothieware.org/panel
  */

  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
    //  EXP1 Pins
    #define BEEPER_PIN                     P1_31  // EXP1 Pin 1
    #define BTN_ENC                        P1_30  // EXP1 Pin 2
    #define LCD_PINS_ENABLE                P0_18  // EXP1 Pin 3 (MOSI)
    #define LCD_PINS_RS                    P0_16  // EXP1 Pin 4 (CS)
    #define LCD_PINS_D4                    P0_15  // EXP1 Pin 5 (SCK)
    //  EXP2 Pins
    #define BTN_EN2                        P3_26  // EXP2 Pin 3
    #define BTN_EN1                        P3_25  // EXP2 Pin 5

    /*
      SD Support

      For the RRD GLCD it CANNOT share the same SPI as the LCD so it must be
      hooked up to the onboard SDCard SPI and use a spare pin for the SDCS.
      Also note that an external SDCard sharing the SPI port with the
      onboard/internal SDCard must be ejected before rebooting as the bootloader
      does not like the external card. NOTE Smoothie will not boot if the external
      sdcard is inserted in the RRD LCD sdcard slot at boot time, it must be
      inserted after it has booted.
    */

    #define MISO_PIN                       P0_08  // EXP2 Pin 1 (PB3, SD_MISO)
    #define SCK_PIN                        P0_07  // EXP2 Pin 2 (SD_SCK)
    #define SS_PIN                         P0_28  // EXP2 Pin 4 (SD_CSEL, SD_CS)
    #define MOSI_PIN                       P0_09  // EXP2 Pin 6 (PB2, SD_MOSI)
    #define SD_DETECT_PIN                  P0_27  // EXP2 Pin 7 (SD_CD, SD_DET)

  #else
    #error "Marlin's Smoothieboard support cannot drive your LCD."
  #endif

#endif

/**
 * I2C Digipots - MCP4451
 * Address 58 (2C << 1)
 * Set from 0 - 127 with stop bit.
 * (Ex. 3F << 1 | 1)
 */
#define DIGIPOTS_I2C_SCL                   P0_0
#define DIGIPOTS_I2C_SDA_X                 P0_04
#define DIGIPOTS_I2C_SDA_Y                 P0_10
#define DIGIPOTS_I2C_SDA_Z                 P0_19
#define DIGIPOTS_I2C_SDA_E0                P0_21
#define DIGIPOTS_I2C_SDA_E1                P4_29

#ifndef DIGIPOT_I2C_ADDRESS_A
  #define DIGIPOT_I2C_ADDRESS_A             0x2C  // unshifted slave address (58 <- 2C << 1)
#endif