Marlin_Firmware/Marlin/thermistortables.h

1200 lines
39 KiB
C
Raw Normal View History

2011-08-12 15:28:35 -05:00
#ifndef THERMISTORTABLES_H_
#define THERMISTORTABLES_H_
#include "Marlin.h"
2015-07-22 17:50:20 -05:00
#include "macros.h"
#define OVERSAMPLENR 16
2011-08-12 15:28:35 -05:00
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORHEATER_3 == 1) || (THERMISTORBED == 1) //100k bed thermistor
2011-08-12 15:28:35 -05:00
const short temptable_1[][2] PROGMEM = {
{23 * OVERSAMPLENR, 300},
{25 * OVERSAMPLENR, 295},
{27 * OVERSAMPLENR, 290},
{28 * OVERSAMPLENR, 285},
{31 * OVERSAMPLENR, 280},
{33 * OVERSAMPLENR, 275},
{35 * OVERSAMPLENR, 270},
{38 * OVERSAMPLENR, 265},
{41 * OVERSAMPLENR, 260},
{44 * OVERSAMPLENR, 255},
{48 * OVERSAMPLENR, 250},
{52 * OVERSAMPLENR, 245},
{56 * OVERSAMPLENR, 240},
{61 * OVERSAMPLENR, 235},
{66 * OVERSAMPLENR, 230},
{71 * OVERSAMPLENR, 225},
{78 * OVERSAMPLENR, 220},
{84 * OVERSAMPLENR, 215},
{92 * OVERSAMPLENR, 210},
{100 * OVERSAMPLENR, 205},
{109 * OVERSAMPLENR, 200},
{120 * OVERSAMPLENR, 195},
{131 * OVERSAMPLENR, 190},
{143 * OVERSAMPLENR, 185},
{156 * OVERSAMPLENR, 180},
{171 * OVERSAMPLENR, 175},
{187 * OVERSAMPLENR, 170},
{205 * OVERSAMPLENR, 165},
{224 * OVERSAMPLENR, 160},
{245 * OVERSAMPLENR, 155},
{268 * OVERSAMPLENR, 150},
{293 * OVERSAMPLENR, 145},
{320 * OVERSAMPLENR, 140},
{348 * OVERSAMPLENR, 135},
{379 * OVERSAMPLENR, 130},
{411 * OVERSAMPLENR, 125},
{445 * OVERSAMPLENR, 120},
{480 * OVERSAMPLENR, 115},
{516 * OVERSAMPLENR, 110},
{553 * OVERSAMPLENR, 105},
{591 * OVERSAMPLENR, 100},
{628 * OVERSAMPLENR, 95},
{665 * OVERSAMPLENR, 90},
{702 * OVERSAMPLENR, 85},
{737 * OVERSAMPLENR, 80},
{770 * OVERSAMPLENR, 75},
{801 * OVERSAMPLENR, 70},
{830 * OVERSAMPLENR, 65},
{857 * OVERSAMPLENR, 60},
{881 * OVERSAMPLENR, 55},
{903 * OVERSAMPLENR, 50},
{922 * OVERSAMPLENR, 45},
{939 * OVERSAMPLENR, 40},
{954 * OVERSAMPLENR, 35},
{966 * OVERSAMPLENR, 30},
{977 * OVERSAMPLENR, 25},
{985 * OVERSAMPLENR, 20},
{993 * OVERSAMPLENR, 15},
{999 * OVERSAMPLENR, 10},
{1004 * OVERSAMPLENR, 5},
{1008 * OVERSAMPLENR, 0} //safety
2011-08-12 15:28:35 -05:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORHEATER_3 == 2) || (THERMISTORBED == 2) //200k bed thermistor
const short temptable_2[][2] PROGMEM = {
//200k ATC Semitec 204GT-2
//Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
{1 * OVERSAMPLENR, 848},
{30 * OVERSAMPLENR, 300}, //top rating 300C
{34 * OVERSAMPLENR, 290},
{39 * OVERSAMPLENR, 280},
{46 * OVERSAMPLENR, 270},
{53 * OVERSAMPLENR, 260},
{63 * OVERSAMPLENR, 250},
{74 * OVERSAMPLENR, 240},
{87 * OVERSAMPLENR, 230},
{104 * OVERSAMPLENR, 220},
{124 * OVERSAMPLENR, 210},
{148 * OVERSAMPLENR, 200},
{176 * OVERSAMPLENR, 190},
{211 * OVERSAMPLENR, 180},
{252 * OVERSAMPLENR, 170},
{301 * OVERSAMPLENR, 160},
{357 * OVERSAMPLENR, 150},
{420 * OVERSAMPLENR, 140},
{489 * OVERSAMPLENR, 130},
{562 * OVERSAMPLENR, 120},
{636 * OVERSAMPLENR, 110},
{708 * OVERSAMPLENR, 100},
{775 * OVERSAMPLENR, 90},
{835 * OVERSAMPLENR, 80},
{884 * OVERSAMPLENR, 70},
{924 * OVERSAMPLENR, 60},
{955 * OVERSAMPLENR, 50},
{977 * OVERSAMPLENR, 40},
{993 * OVERSAMPLENR, 30},
{1004 * OVERSAMPLENR, 20},
{1012 * OVERSAMPLENR, 10},
{1016 * OVERSAMPLENR, 0},
2011-08-12 15:28:35 -05:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORHEATER_3 == 3) || (THERMISTORBED == 3) //mendel-parts
const short temptable_3[][2] PROGMEM = {
{1 * OVERSAMPLENR, 864},
{21 * OVERSAMPLENR, 300},
{25 * OVERSAMPLENR, 290},
{29 * OVERSAMPLENR, 280},
{33 * OVERSAMPLENR, 270},
{39 * OVERSAMPLENR, 260},
{46 * OVERSAMPLENR, 250},
{54 * OVERSAMPLENR, 240},
{64 * OVERSAMPLENR, 230},
{75 * OVERSAMPLENR, 220},
{90 * OVERSAMPLENR, 210},
{107 * OVERSAMPLENR, 200},
{128 * OVERSAMPLENR, 190},
{154 * OVERSAMPLENR, 180},
{184 * OVERSAMPLENR, 170},
{221 * OVERSAMPLENR, 160},
{265 * OVERSAMPLENR, 150},
{316 * OVERSAMPLENR, 140},
{375 * OVERSAMPLENR, 130},
{441 * OVERSAMPLENR, 120},
{513 * OVERSAMPLENR, 110},
{588 * OVERSAMPLENR, 100},
{734 * OVERSAMPLENR, 80},
{856 * OVERSAMPLENR, 60},
{938 * OVERSAMPLENR, 40},
{986 * OVERSAMPLENR, 20},
{1008 * OVERSAMPLENR, 0},
{1018 * OVERSAMPLENR, -20}
};
2011-08-12 15:28:35 -05:00
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORHEATER_3 == 4) || (THERMISTORBED == 4) //10k thermistor
const short temptable_4[][2] PROGMEM = {
{1 * OVERSAMPLENR, 430},
{54 * OVERSAMPLENR, 137},
{107 * OVERSAMPLENR, 107},
{160 * OVERSAMPLENR, 91},
{213 * OVERSAMPLENR, 80},
{266 * OVERSAMPLENR, 71},
{319 * OVERSAMPLENR, 64},
{372 * OVERSAMPLENR, 57},
{425 * OVERSAMPLENR, 51},
{478 * OVERSAMPLENR, 46},
{531 * OVERSAMPLENR, 41},
{584 * OVERSAMPLENR, 35},
{637 * OVERSAMPLENR, 30},
{690 * OVERSAMPLENR, 25},
{743 * OVERSAMPLENR, 20},
{796 * OVERSAMPLENR, 14},
{849 * OVERSAMPLENR, 7},
{902 * OVERSAMPLENR, 0},
{955 * OVERSAMPLENR, -11},
{1008 * OVERSAMPLENR, -35}
2011-11-04 16:51:14 -05:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORHEATER_3 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
const short temptable_5[][2] PROGMEM = {
// ATC Semitec 104GT-2 (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
{1 * OVERSAMPLENR, 713},
{17 * OVERSAMPLENR, 300}, //top rating 300C
{20 * OVERSAMPLENR, 290},
{23 * OVERSAMPLENR, 280},
{27 * OVERSAMPLENR, 270},
{31 * OVERSAMPLENR, 260},
{37 * OVERSAMPLENR, 250},
{43 * OVERSAMPLENR, 240},
{51 * OVERSAMPLENR, 230},
{61 * OVERSAMPLENR, 220},
{73 * OVERSAMPLENR, 210},
{87 * OVERSAMPLENR, 200},
{106 * OVERSAMPLENR, 190},
{128 * OVERSAMPLENR, 180},
{155 * OVERSAMPLENR, 170},
{189 * OVERSAMPLENR, 160},
{230 * OVERSAMPLENR, 150},
{278 * OVERSAMPLENR, 140},
{336 * OVERSAMPLENR, 130},
{402 * OVERSAMPLENR, 120},
{476 * OVERSAMPLENR, 110},
{554 * OVERSAMPLENR, 100},
{635 * OVERSAMPLENR, 90},
{713 * OVERSAMPLENR, 80},
{784 * OVERSAMPLENR, 70},
{846 * OVERSAMPLENR, 60},
{897 * OVERSAMPLENR, 50},
{937 * OVERSAMPLENR, 40},
{966 * OVERSAMPLENR, 30},
{986 * OVERSAMPLENR, 20},
{1000 * OVERSAMPLENR, 10},
{1010 * OVERSAMPLENR, 0}
2011-11-04 16:51:14 -05:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORHEATER_3 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
const short temptable_6[][2] PROGMEM = {
{1 * OVERSAMPLENR, 350},
{28 * OVERSAMPLENR, 250}, //top rating 250C
{31 * OVERSAMPLENR, 245},
{35 * OVERSAMPLENR, 240},
{39 * OVERSAMPLENR, 235},
{42 * OVERSAMPLENR, 230},
{44 * OVERSAMPLENR, 225},
{49 * OVERSAMPLENR, 220},
{53 * OVERSAMPLENR, 215},
{62 * OVERSAMPLENR, 210},
{71 * OVERSAMPLENR, 205}, //fitted graphically
{78 * OVERSAMPLENR, 200}, //fitted graphically
{94 * OVERSAMPLENR, 190},
{102 * OVERSAMPLENR, 185},
{116 * OVERSAMPLENR, 170},
{143 * OVERSAMPLENR, 160},
{183 * OVERSAMPLENR, 150},
{223 * OVERSAMPLENR, 140},
{270 * OVERSAMPLENR, 130},
{318 * OVERSAMPLENR, 120},
{383 * OVERSAMPLENR, 110},
{413 * OVERSAMPLENR, 105},
{439 * OVERSAMPLENR, 100},
{484 * OVERSAMPLENR, 95},
{513 * OVERSAMPLENR, 90},
{607 * OVERSAMPLENR, 80},
{664 * OVERSAMPLENR, 70},
{781 * OVERSAMPLENR, 60},
{810 * OVERSAMPLENR, 55},
{849 * OVERSAMPLENR, 50},
{914 * OVERSAMPLENR, 45},
{914 * OVERSAMPLENR, 40},
{935 * OVERSAMPLENR, 35},
{954 * OVERSAMPLENR, 30},
{970 * OVERSAMPLENR, 25},
{978 * OVERSAMPLENR, 22},
{1008 * OVERSAMPLENR, 3},
{1023 * OVERSAMPLENR, 0} //to allow internal 0 degrees C
2011-11-04 16:51:14 -05:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORHEATER_3 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
const short temptable_7[][2] PROGMEM = {
{1 * OVERSAMPLENR, 941},
{19 * OVERSAMPLENR, 362},
{37 * OVERSAMPLENR, 299}, //top rating 300C
{55 * OVERSAMPLENR, 266},
{73 * OVERSAMPLENR, 245},
{91 * OVERSAMPLENR, 229},
{109 * OVERSAMPLENR, 216},
{127 * OVERSAMPLENR, 206},
{145 * OVERSAMPLENR, 197},
{163 * OVERSAMPLENR, 190},
{181 * OVERSAMPLENR, 183},
{199 * OVERSAMPLENR, 177},
{217 * OVERSAMPLENR, 171},
{235 * OVERSAMPLENR, 166},
{253 * OVERSAMPLENR, 162},
{271 * OVERSAMPLENR, 157},
{289 * OVERSAMPLENR, 153},
{307 * OVERSAMPLENR, 149},
{325 * OVERSAMPLENR, 146},
{343 * OVERSAMPLENR, 142},
{361 * OVERSAMPLENR, 139},
{379 * OVERSAMPLENR, 135},
{397 * OVERSAMPLENR, 132},
{415 * OVERSAMPLENR, 129},
{433 * OVERSAMPLENR, 126},
{451 * OVERSAMPLENR, 123},
{469 * OVERSAMPLENR, 121},
{487 * OVERSAMPLENR, 118},
{505 * OVERSAMPLENR, 115},
{523 * OVERSAMPLENR, 112},
{541 * OVERSAMPLENR, 110},
{559 * OVERSAMPLENR, 107},
{577 * OVERSAMPLENR, 105},
{595 * OVERSAMPLENR, 102},
{613 * OVERSAMPLENR, 99},
{631 * OVERSAMPLENR, 97},
{649 * OVERSAMPLENR, 94},
{667 * OVERSAMPLENR, 92},
{685 * OVERSAMPLENR, 89},
{703 * OVERSAMPLENR, 86},
{721 * OVERSAMPLENR, 84},
{739 * OVERSAMPLENR, 81},
{757 * OVERSAMPLENR, 78},
{775 * OVERSAMPLENR, 75},
{793 * OVERSAMPLENR, 72},
{811 * OVERSAMPLENR, 69},
{829 * OVERSAMPLENR, 66},
{847 * OVERSAMPLENR, 62},
{865 * OVERSAMPLENR, 59},
{883 * OVERSAMPLENR, 55},
{901 * OVERSAMPLENR, 51},
{919 * OVERSAMPLENR, 46},
{937 * OVERSAMPLENR, 41},
{955 * OVERSAMPLENR, 35},
{973 * OVERSAMPLENR, 27},
{991 * OVERSAMPLENR, 17},
{1009 * OVERSAMPLENR, 1},
{1023 * OVERSAMPLENR, 0} //to allow internal 0 degrees C
2011-11-04 16:51:14 -05:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORHEATER_3 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01
// R0 = 100000 Ohm
// T0 = 25 °C
// Beta = 3974
// R1 = 0 Ohm
// R2 = 4700 Ohm
const short temptable_71[][2] PROGMEM = {
{35 * OVERSAMPLENR, 300},
{51 * OVERSAMPLENR, 270},
{54 * OVERSAMPLENR, 265},
{58 * OVERSAMPLENR, 260},
{59 * OVERSAMPLENR, 258},
{61 * OVERSAMPLENR, 256},
{63 * OVERSAMPLENR, 254},
{64 * OVERSAMPLENR, 252},
{66 * OVERSAMPLENR, 250},
{67 * OVERSAMPLENR, 249},
{68 * OVERSAMPLENR, 248},
{69 * OVERSAMPLENR, 247},
{70 * OVERSAMPLENR, 246},
{71 * OVERSAMPLENR, 245},
{72 * OVERSAMPLENR, 244},
{73 * OVERSAMPLENR, 243},
{74 * OVERSAMPLENR, 242},
{75 * OVERSAMPLENR, 241},
{76 * OVERSAMPLENR, 240},
{77 * OVERSAMPLENR, 239},
{78 * OVERSAMPLENR, 238},
{79 * OVERSAMPLENR, 237},
{80 * OVERSAMPLENR, 236},
{81 * OVERSAMPLENR, 235},
{82 * OVERSAMPLENR, 234},
{84 * OVERSAMPLENR, 233},
{85 * OVERSAMPLENR, 232},
{86 * OVERSAMPLENR, 231},
{87 * OVERSAMPLENR, 230},
{89 * OVERSAMPLENR, 229},
{90 * OVERSAMPLENR, 228},
{91 * OVERSAMPLENR, 227},
{92 * OVERSAMPLENR, 226},
{94 * OVERSAMPLENR, 225},
{95 * OVERSAMPLENR, 224},
{97 * OVERSAMPLENR, 223},
{98 * OVERSAMPLENR, 222},
{99 * OVERSAMPLENR, 221},
{101 * OVERSAMPLENR, 220},
{102 * OVERSAMPLENR, 219},
{104 * OVERSAMPLENR, 218},
{106 * OVERSAMPLENR, 217},
{107 * OVERSAMPLENR, 216},
{109 * OVERSAMPLENR, 215},
{110 * OVERSAMPLENR, 214},
{112 * OVERSAMPLENR, 213},
{114 * OVERSAMPLENR, 212},
{115 * OVERSAMPLENR, 211},
{117 * OVERSAMPLENR, 210},
{119 * OVERSAMPLENR, 209},
{121 * OVERSAMPLENR, 208},
{123 * OVERSAMPLENR, 207},
{125 * OVERSAMPLENR, 206},
{126 * OVERSAMPLENR, 205},
{128 * OVERSAMPLENR, 204},
{130 * OVERSAMPLENR, 203},
{132 * OVERSAMPLENR, 202},
{134 * OVERSAMPLENR, 201},
{136 * OVERSAMPLENR, 200},
{139 * OVERSAMPLENR, 199},
{141 * OVERSAMPLENR, 198},
{143 * OVERSAMPLENR, 197},
{145 * OVERSAMPLENR, 196},
{147 * OVERSAMPLENR, 195},
{150 * OVERSAMPLENR, 194},
{152 * OVERSAMPLENR, 193},
{154 * OVERSAMPLENR, 192},
{157 * OVERSAMPLENR, 191},
{159 * OVERSAMPLENR, 190},
{162 * OVERSAMPLENR, 189},
{164 * OVERSAMPLENR, 188},
{167 * OVERSAMPLENR, 187},
{170 * OVERSAMPLENR, 186},
{172 * OVERSAMPLENR, 185},
{175 * OVERSAMPLENR, 184},
{178 * OVERSAMPLENR, 183},
{181 * OVERSAMPLENR, 182},
{184 * OVERSAMPLENR, 181},
{187 * OVERSAMPLENR, 180},
{190 * OVERSAMPLENR, 179},
{193 * OVERSAMPLENR, 178},
{196 * OVERSAMPLENR, 177},
{199 * OVERSAMPLENR, 176},
{202 * OVERSAMPLENR, 175},
{205 * OVERSAMPLENR, 174},
{208 * OVERSAMPLENR, 173},
{212 * OVERSAMPLENR, 172},
{215 * OVERSAMPLENR, 171},
{219 * OVERSAMPLENR, 170},
{237 * OVERSAMPLENR, 165},
{256 * OVERSAMPLENR, 160},
{300 * OVERSAMPLENR, 150},
{351 * OVERSAMPLENR, 140},
{470 * OVERSAMPLENR, 120},
{504 * OVERSAMPLENR, 115},
{538 * OVERSAMPLENR, 110},
{552 * OVERSAMPLENR, 108},
{566 * OVERSAMPLENR, 106},
{580 * OVERSAMPLENR, 104},
{594 * OVERSAMPLENR, 102},
{608 * OVERSAMPLENR, 100},
{622 * OVERSAMPLENR, 98},
{636 * OVERSAMPLENR, 96},
{650 * OVERSAMPLENR, 94},
{664 * OVERSAMPLENR, 92},
{678 * OVERSAMPLENR, 90},
{712 * OVERSAMPLENR, 85},
{745 * OVERSAMPLENR, 80},
{758 * OVERSAMPLENR, 78},
{770 * OVERSAMPLENR, 76},
{783 * OVERSAMPLENR, 74},
{795 * OVERSAMPLENR, 72},
{806 * OVERSAMPLENR, 70},
{818 * OVERSAMPLENR, 68},
{829 * OVERSAMPLENR, 66},
{840 * OVERSAMPLENR, 64},
{850 * OVERSAMPLENR, 62},
{860 * OVERSAMPLENR, 60},
{870 * OVERSAMPLENR, 58},
{879 * OVERSAMPLENR, 56},
{888 * OVERSAMPLENR, 54},
{897 * OVERSAMPLENR, 52},
{905 * OVERSAMPLENR, 50},
{924 * OVERSAMPLENR, 45},
{940 * OVERSAMPLENR, 40},
{955 * OVERSAMPLENR, 35},
{967 * OVERSAMPLENR, 30},
{970 * OVERSAMPLENR, 29},
{972 * OVERSAMPLENR, 28},
{974 * OVERSAMPLENR, 27},
{976 * OVERSAMPLENR, 26},
{978 * OVERSAMPLENR, 25},
{980 * OVERSAMPLENR, 24},
{982 * OVERSAMPLENR, 23},
{984 * OVERSAMPLENR, 22},
{985 * OVERSAMPLENR, 21},
{987 * OVERSAMPLENR, 20},
{995 * OVERSAMPLENR, 15},
{1001 * OVERSAMPLENR, 10},
{1006 * OVERSAMPLENR, 5},
{1010 * OVERSAMPLENR, 0},
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORHEATER_3 == 8) || (THERMISTORBED == 8)
2012-12-30 05:09:38 -06:00
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
const short temptable_8[][2] PROGMEM = {
{1 * OVERSAMPLENR, 704},
{54 * OVERSAMPLENR, 216},
{107 * OVERSAMPLENR, 175},
{160 * OVERSAMPLENR, 152},
{213 * OVERSAMPLENR, 137},
{266 * OVERSAMPLENR, 125},
{319 * OVERSAMPLENR, 115},
{372 * OVERSAMPLENR, 106},
{425 * OVERSAMPLENR, 99},
{478 * OVERSAMPLENR, 91},
{531 * OVERSAMPLENR, 85},
{584 * OVERSAMPLENR, 78},
{637 * OVERSAMPLENR, 71},
{690 * OVERSAMPLENR, 65},
{743 * OVERSAMPLENR, 58},
{796 * OVERSAMPLENR, 50},
{849 * OVERSAMPLENR, 42},
{902 * OVERSAMPLENR, 31},
{955 * OVERSAMPLENR, 17},
{1008 * OVERSAMPLENR, 0}
2012-12-30 05:09:38 -06:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORHEATER_3 == 9) || (THERMISTORBED == 9)
2012-12-30 05:09:38 -06:00
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
const short temptable_9[][2] PROGMEM = {
{1 * OVERSAMPLENR, 936},
{36 * OVERSAMPLENR, 300},
{71 * OVERSAMPLENR, 246},
{106 * OVERSAMPLENR, 218},
{141 * OVERSAMPLENR, 199},
{176 * OVERSAMPLENR, 185},
{211 * OVERSAMPLENR, 173},
{246 * OVERSAMPLENR, 163},
{281 * OVERSAMPLENR, 155},
{316 * OVERSAMPLENR, 147},
{351 * OVERSAMPLENR, 140},
{386 * OVERSAMPLENR, 134},
{421 * OVERSAMPLENR, 128},
{456 * OVERSAMPLENR, 122},
{491 * OVERSAMPLENR, 117},
{526 * OVERSAMPLENR, 112},
{561 * OVERSAMPLENR, 107},
{596 * OVERSAMPLENR, 102},
{631 * OVERSAMPLENR, 97},
{666 * OVERSAMPLENR, 92},
{701 * OVERSAMPLENR, 87},
{736 * OVERSAMPLENR, 81},
{771 * OVERSAMPLENR, 76},
{806 * OVERSAMPLENR, 70},
{841 * OVERSAMPLENR, 63},
{876 * OVERSAMPLENR, 56},
{911 * OVERSAMPLENR, 48},
{946 * OVERSAMPLENR, 38},
{981 * OVERSAMPLENR, 23},
{1005 * OVERSAMPLENR, 5},
{1016 * OVERSAMPLENR, 0}
2012-12-30 05:09:38 -06:00
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORHEATER_3 == 10) || (THERMISTORBED == 10)
2012-12-30 05:09:38 -06:00
// 100k RS thermistor 198-961 (4.7k pullup)
const short temptable_10[][2] PROGMEM = {
{1 * OVERSAMPLENR, 929},
{36 * OVERSAMPLENR, 299},
{71 * OVERSAMPLENR, 246},
{106 * OVERSAMPLENR, 217},
{141 * OVERSAMPLENR, 198},
{176 * OVERSAMPLENR, 184},
{211 * OVERSAMPLENR, 173},
{246 * OVERSAMPLENR, 163},
{281 * OVERSAMPLENR, 154},
{316 * OVERSAMPLENR, 147},
{351 * OVERSAMPLENR, 140},
{386 * OVERSAMPLENR, 134},
{421 * OVERSAMPLENR, 128},
{456 * OVERSAMPLENR, 122},
{491 * OVERSAMPLENR, 117},
{526 * OVERSAMPLENR, 112},
{561 * OVERSAMPLENR, 107},
{596 * OVERSAMPLENR, 102},
{631 * OVERSAMPLENR, 97},
{666 * OVERSAMPLENR, 91},
{701 * OVERSAMPLENR, 86},
{736 * OVERSAMPLENR, 81},
{771 * OVERSAMPLENR, 76},
{806 * OVERSAMPLENR, 70},
{841 * OVERSAMPLENR, 63},
{876 * OVERSAMPLENR, 56},
{911 * OVERSAMPLENR, 48},
{946 * OVERSAMPLENR, 38},
{981 * OVERSAMPLENR, 23},
{1005 * OVERSAMPLENR, 5},
{1016 * OVERSAMPLENR, 0}
2012-12-30 05:09:38 -06:00
};
#endif
2014-04-13 11:00:55 -05:00
#if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORHEATER_3 == 11) || (THERMISTORBED == 11)
2014-04-13 11:00:55 -05:00
// QU-BD silicone bed QWG-104F-3950 thermistor
const short temptable_11[][2] PROGMEM = {
{1 * OVERSAMPLENR, 938},
{31 * OVERSAMPLENR, 314},
{41 * OVERSAMPLENR, 290},
{51 * OVERSAMPLENR, 272},
{61 * OVERSAMPLENR, 258},
{71 * OVERSAMPLENR, 247},
{81 * OVERSAMPLENR, 237},
{91 * OVERSAMPLENR, 229},
{101 * OVERSAMPLENR, 221},
{111 * OVERSAMPLENR, 215},
{121 * OVERSAMPLENR, 209},
{131 * OVERSAMPLENR, 204},
{141 * OVERSAMPLENR, 199},
{151 * OVERSAMPLENR, 195},
{161 * OVERSAMPLENR, 190},
{171 * OVERSAMPLENR, 187},
{181 * OVERSAMPLENR, 183},
{191 * OVERSAMPLENR, 179},
{201 * OVERSAMPLENR, 176},
{221 * OVERSAMPLENR, 170},
{241 * OVERSAMPLENR, 165},
{261 * OVERSAMPLENR, 160},
{281 * OVERSAMPLENR, 155},
{301 * OVERSAMPLENR, 150},
{331 * OVERSAMPLENR, 144},
{361 * OVERSAMPLENR, 139},
{391 * OVERSAMPLENR, 133},
{421 * OVERSAMPLENR, 128},
{451 * OVERSAMPLENR, 123},
{491 * OVERSAMPLENR, 117},
{531 * OVERSAMPLENR, 111},
{571 * OVERSAMPLENR, 105},
{611 * OVERSAMPLENR, 100},
{641 * OVERSAMPLENR, 95},
{681 * OVERSAMPLENR, 90},
{711 * OVERSAMPLENR, 85},
{751 * OVERSAMPLENR, 79},
{791 * OVERSAMPLENR, 72},
{811 * OVERSAMPLENR, 69},
{831 * OVERSAMPLENR, 65},
{871 * OVERSAMPLENR, 57},
{881 * OVERSAMPLENR, 55},
{901 * OVERSAMPLENR, 51},
{921 * OVERSAMPLENR, 45},
{941 * OVERSAMPLENR, 39},
{971 * OVERSAMPLENR, 28},
{981 * OVERSAMPLENR, 23},
{991 * OVERSAMPLENR, 17},
{1001 * OVERSAMPLENR, 9},
{1021 * OVERSAMPLENR, -27}
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORHEATER_3 == 13) || (THERMISTORBED == 13)
// Hisens thermistor B25/50 =3950 +/-1%
const short temptable_13[][2] PROGMEM = {
{ 20.04 * OVERSAMPLENR, 300 },
{ 23.19 * OVERSAMPLENR, 290 },
{ 26.71 * OVERSAMPLENR, 280 },
{ 31.23 * OVERSAMPLENR, 270 },
{ 36.52 * OVERSAMPLENR, 260 },
{ 42.75 * OVERSAMPLENR, 250 },
{ 50.68 * OVERSAMPLENR, 240 },
{ 60.22 * OVERSAMPLENR, 230 },
{ 72.03 * OVERSAMPLENR, 220 },
{ 86.84 * OVERSAMPLENR, 210 },
{ 102.79 * OVERSAMPLENR, 200 },
{ 124.46 * OVERSAMPLENR, 190 },
{ 151.02 * OVERSAMPLENR, 180 },
{ 182.86 * OVERSAMPLENR, 170 },
{ 220.72 * OVERSAMPLENR, 160 },
{ 316.96 * OVERSAMPLENR, 140 },
{ 447.17 * OVERSAMPLENR, 120 },
{ 590.61 * OVERSAMPLENR, 100 },
{ 737.31 * OVERSAMPLENR, 80 },
{ 857.77 * OVERSAMPLENR, 60 },
{ 939.52 * OVERSAMPLENR, 40 },
{ 986.03 * OVERSAMPLENR, 20 },
{ 1008.7 * OVERSAMPLENR, 0}
};
#endif
#if (THERMISTORHEATER_0 == 20) || (THERMISTORHEATER_1 == 20) || (THERMISTORHEATER_2 == 20) || (THERMISTORBED == 20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
/* The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
This does not match the normal thermistor behaviour so we need to set the following defines */
#if (THERMISTORHEATER_0 == 20)
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0
#endif
#if (THERMISTORHEATER_1 == 20)
#define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0
#endif
#if (THERMISTORHEATER_2 == 20)
#define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_3 == 20)
#define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0
2015-01-23 16:13:06 -06:00
#endif
#if (THERMISTORBED == 20)
#define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0
#endif
const short temptable_20[][2] PROGMEM = {
{ 0 * OVERSAMPLENR , 0 },
{ 227 * OVERSAMPLENR , 1 },
{ 236 * OVERSAMPLENR , 10 },
{ 245 * OVERSAMPLENR , 20 },
{ 253 * OVERSAMPLENR , 30 },
{ 262 * OVERSAMPLENR , 40 },
{ 270 * OVERSAMPLENR , 50 },
{ 279 * OVERSAMPLENR , 60 },
{ 287 * OVERSAMPLENR , 70 },
{ 295 * OVERSAMPLENR , 80 },
{ 304 * OVERSAMPLENR , 90 },
{ 312 * OVERSAMPLENR , 100 },
{ 320 * OVERSAMPLENR , 110 },
{ 329 * OVERSAMPLENR , 120 },
{ 337 * OVERSAMPLENR , 130 },
{ 345 * OVERSAMPLENR , 140 },
{ 353 * OVERSAMPLENR , 150 },
{ 361 * OVERSAMPLENR , 160 },
{ 369 * OVERSAMPLENR , 170 },
{ 377 * OVERSAMPLENR , 180 },
{ 385 * OVERSAMPLENR , 190 },
{ 393 * OVERSAMPLENR , 200 },
{ 401 * OVERSAMPLENR , 210 },
{ 409 * OVERSAMPLENR , 220 },
{ 417 * OVERSAMPLENR , 230 },
{ 424 * OVERSAMPLENR , 240 },
{ 432 * OVERSAMPLENR , 250 },
{ 440 * OVERSAMPLENR , 260 },
{ 447 * OVERSAMPLENR , 270 },
{ 455 * OVERSAMPLENR , 280 },
{ 463 * OVERSAMPLENR , 290 },
{ 470 * OVERSAMPLENR , 300 },
{ 478 * OVERSAMPLENR , 310 },
{ 485 * OVERSAMPLENR , 320 },
{ 493 * OVERSAMPLENR , 330 },
{ 500 * OVERSAMPLENR , 340 },
{ 507 * OVERSAMPLENR , 350 },
{ 515 * OVERSAMPLENR , 360 },
{ 522 * OVERSAMPLENR , 370 },
{ 529 * OVERSAMPLENR , 380 },
{ 537 * OVERSAMPLENR , 390 },
{ 544 * OVERSAMPLENR , 400 },
{ 614 * OVERSAMPLENR , 500 },
{ 681 * OVERSAMPLENR , 600 },
{ 744 * OVERSAMPLENR , 700 },
{ 805 * OVERSAMPLENR , 800 },
{ 862 * OVERSAMPLENR , 900 },
{ 917 * OVERSAMPLENR , 1000 },
{ 968 * OVERSAMPLENR , 1100 }
};
#endif
2011-11-04 16:51:14 -05:00
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORHEATER_3 == 51) || (THERMISTORBED == 51)
2012-05-20 05:35:28 -05:00
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
2012-05-20 05:55:22 -05:00
// Verified by linagee.
2012-05-20 05:35:28 -05:00
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
2012-05-19 06:52:12 -05:00
// Advantage: Twice the resolution and better linearity from 150C to 200C
2012-05-20 05:35:28 -05:00
const short temptable_51[][2] PROGMEM = {
{1 * OVERSAMPLENR, 350},
{190 * OVERSAMPLENR, 250}, //top rating 250C
{203 * OVERSAMPLENR, 245},
{217 * OVERSAMPLENR, 240},
{232 * OVERSAMPLENR, 235},
{248 * OVERSAMPLENR, 230},
{265 * OVERSAMPLENR, 225},
{283 * OVERSAMPLENR, 220},
{302 * OVERSAMPLENR, 215},
{322 * OVERSAMPLENR, 210},
{344 * OVERSAMPLENR, 205},
{366 * OVERSAMPLENR, 200},
{390 * OVERSAMPLENR, 195},
{415 * OVERSAMPLENR, 190},
{440 * OVERSAMPLENR, 185},
{467 * OVERSAMPLENR, 180},
{494 * OVERSAMPLENR, 175},
{522 * OVERSAMPLENR, 170},
{551 * OVERSAMPLENR, 165},
{580 * OVERSAMPLENR, 160},
{609 * OVERSAMPLENR, 155},
{638 * OVERSAMPLENR, 150},
{666 * OVERSAMPLENR, 145},
{695 * OVERSAMPLENR, 140},
{722 * OVERSAMPLENR, 135},
{749 * OVERSAMPLENR, 130},
{775 * OVERSAMPLENR, 125},
{800 * OVERSAMPLENR, 120},
{823 * OVERSAMPLENR, 115},
{845 * OVERSAMPLENR, 110},
{865 * OVERSAMPLENR, 105},
{884 * OVERSAMPLENR, 100},
{901 * OVERSAMPLENR, 95},
{917 * OVERSAMPLENR, 90},
{932 * OVERSAMPLENR, 85},
{944 * OVERSAMPLENR, 80},
{956 * OVERSAMPLENR, 75},
{966 * OVERSAMPLENR, 70},
{975 * OVERSAMPLENR, 65},
{982 * OVERSAMPLENR, 60},
{989 * OVERSAMPLENR, 55},
{995 * OVERSAMPLENR, 50},
{1000 * OVERSAMPLENR, 45},
{1004 * OVERSAMPLENR, 40},
{1007 * OVERSAMPLENR, 35},
{1010 * OVERSAMPLENR, 30},
{1013 * OVERSAMPLENR, 25},
{1015 * OVERSAMPLENR, 20},
{1017 * OVERSAMPLENR, 15},
{1018 * OVERSAMPLENR, 10},
{1019 * OVERSAMPLENR, 5},
{1020 * OVERSAMPLENR, 0},
{1021 * OVERSAMPLENR, -5}
2012-05-19 06:52:12 -05:00
};
#endif
#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORHEATER_3 == 52) || (THERMISTORBED == 52)
2012-05-20 05:35:28 -05:00
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_52[][2] PROGMEM = {
{1 * OVERSAMPLENR, 500},
{125 * OVERSAMPLENR, 300}, //top rating 300C
{142 * OVERSAMPLENR, 290},
{162 * OVERSAMPLENR, 280},
{185 * OVERSAMPLENR, 270},
{211 * OVERSAMPLENR, 260},
{240 * OVERSAMPLENR, 250},
{274 * OVERSAMPLENR, 240},
{312 * OVERSAMPLENR, 230},
{355 * OVERSAMPLENR, 220},
{401 * OVERSAMPLENR, 210},
{452 * OVERSAMPLENR, 200},
{506 * OVERSAMPLENR, 190},
{563 * OVERSAMPLENR, 180},
{620 * OVERSAMPLENR, 170},
{677 * OVERSAMPLENR, 160},
{732 * OVERSAMPLENR, 150},
{783 * OVERSAMPLENR, 140},
{830 * OVERSAMPLENR, 130},
{871 * OVERSAMPLENR, 120},
{906 * OVERSAMPLENR, 110},
{935 * OVERSAMPLENR, 100},
{958 * OVERSAMPLENR, 90},
{976 * OVERSAMPLENR, 80},
{990 * OVERSAMPLENR, 70},
{1000 * OVERSAMPLENR, 60},
{1008 * OVERSAMPLENR, 50},
{1013 * OVERSAMPLENR, 40},
{1017 * OVERSAMPLENR, 30},
{1019 * OVERSAMPLENR, 20},
{1021 * OVERSAMPLENR, 10},
{1022 * OVERSAMPLENR, 0}
2012-05-20 05:35:28 -05:00
};
#endif
#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORHEATER_3 == 55) || (THERMISTORBED == 55)
2012-05-20 14:18:45 -05:00
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
2012-08-28 12:47:22 -05:00
const short temptable_55[][2] PROGMEM = {
{1 * OVERSAMPLENR, 500},
{76 * OVERSAMPLENR, 300},
{87 * OVERSAMPLENR, 290},
{100 * OVERSAMPLENR, 280},
{114 * OVERSAMPLENR, 270},
{131 * OVERSAMPLENR, 260},
{152 * OVERSAMPLENR, 250},
{175 * OVERSAMPLENR, 240},
{202 * OVERSAMPLENR, 230},
{234 * OVERSAMPLENR, 220},
{271 * OVERSAMPLENR, 210},
{312 * OVERSAMPLENR, 200},
{359 * OVERSAMPLENR, 190},
{411 * OVERSAMPLENR, 180},
{467 * OVERSAMPLENR, 170},
{527 * OVERSAMPLENR, 160},
{590 * OVERSAMPLENR, 150},
{652 * OVERSAMPLENR, 140},
{713 * OVERSAMPLENR, 130},
{770 * OVERSAMPLENR, 120},
{822 * OVERSAMPLENR, 110},
{867 * OVERSAMPLENR, 100},
{905 * OVERSAMPLENR, 90},
{936 * OVERSAMPLENR, 80},
{961 * OVERSAMPLENR, 70},
{979 * OVERSAMPLENR, 60},
{993 * OVERSAMPLENR, 50},
{1003 * OVERSAMPLENR, 40},
{1010 * OVERSAMPLENR, 30},
{1015 * OVERSAMPLENR, 20},
{1018 * OVERSAMPLENR, 10},
{1020 * OVERSAMPLENR, 0}
2012-05-20 14:18:45 -05:00
};
#endif
2012-05-20 05:35:28 -05:00
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORHEATER_3 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermister
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
// r0: 100000
// t0: 25
// r1: 0 (parallel with rTherm)
// r2: 4700 (series with rTherm)
// beta: 3950
// min adc: 1 at 0.0048828125 V
// max adc: 1023 at 4.9951171875 V
const short temptable_60[][2] PROGMEM = {
{51 * OVERSAMPLENR, 272},
{61 * OVERSAMPLENR, 258},
{71 * OVERSAMPLENR, 247},
{81 * OVERSAMPLENR, 237},
{91 * OVERSAMPLENR, 229},
{101 * OVERSAMPLENR, 221},
{131 * OVERSAMPLENR, 204},
{161 * OVERSAMPLENR, 190},
{191 * OVERSAMPLENR, 179},
{231 * OVERSAMPLENR, 167},
{271 * OVERSAMPLENR, 157},
{311 * OVERSAMPLENR, 148},
{351 * OVERSAMPLENR, 140},
{381 * OVERSAMPLENR, 135},
{411 * OVERSAMPLENR, 130},
{441 * OVERSAMPLENR, 125},
{451 * OVERSAMPLENR, 123},
{461 * OVERSAMPLENR, 122},
{471 * OVERSAMPLENR, 120},
{481 * OVERSAMPLENR, 119},
{491 * OVERSAMPLENR, 117},
{501 * OVERSAMPLENR, 116},
{511 * OVERSAMPLENR, 114},
{521 * OVERSAMPLENR, 113},
{531 * OVERSAMPLENR, 111},
{541 * OVERSAMPLENR, 110},
{551 * OVERSAMPLENR, 108},
{561 * OVERSAMPLENR, 107},
{571 * OVERSAMPLENR, 105},
{581 * OVERSAMPLENR, 104},
{591 * OVERSAMPLENR, 102},
{601 * OVERSAMPLENR, 101},
{611 * OVERSAMPLENR, 100},
{621 * OVERSAMPLENR, 98},
{631 * OVERSAMPLENR, 97},
{641 * OVERSAMPLENR, 95},
{651 * OVERSAMPLENR, 94},
{661 * OVERSAMPLENR, 92},
{671 * OVERSAMPLENR, 91},
{681 * OVERSAMPLENR, 90},
{691 * OVERSAMPLENR, 88},
{701 * OVERSAMPLENR, 87},
{711 * OVERSAMPLENR, 85},
{721 * OVERSAMPLENR, 84},
{731 * OVERSAMPLENR, 82},
{741 * OVERSAMPLENR, 81},
{751 * OVERSAMPLENR, 79},
{761 * OVERSAMPLENR, 77},
{771 * OVERSAMPLENR, 76},
{781 * OVERSAMPLENR, 74},
{791 * OVERSAMPLENR, 72},
{801 * OVERSAMPLENR, 71},
{811 * OVERSAMPLENR, 69},
{821 * OVERSAMPLENR, 67},
{831 * OVERSAMPLENR, 65},
{841 * OVERSAMPLENR, 63},
{851 * OVERSAMPLENR, 62},
{861 * OVERSAMPLENR, 60},
{871 * OVERSAMPLENR, 57},
{881 * OVERSAMPLENR, 55},
{891 * OVERSAMPLENR, 53},
{901 * OVERSAMPLENR, 51},
{911 * OVERSAMPLENR, 48},
{921 * OVERSAMPLENR, 45},
{931 * OVERSAMPLENR, 42},
{941 * OVERSAMPLENR, 39},
{951 * OVERSAMPLENR, 36},
{961 * OVERSAMPLENR, 32},
{981 * OVERSAMPLENR, 23},
{991 * OVERSAMPLENR, 17},
{1001 * OVERSAMPLENR, 9},
{1008 * OVERSAMPLENR, 0},
};
#endif
#if (THERMISTORBED == 12)
//100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
const short temptable_12[][2] PROGMEM = {
{35 * OVERSAMPLENR, 180}, //top rating 180C
{211 * OVERSAMPLENR, 140},
{233 * OVERSAMPLENR, 135},
{261 * OVERSAMPLENR, 130},
{290 * OVERSAMPLENR, 125},
{328 * OVERSAMPLENR, 120},
{362 * OVERSAMPLENR, 115},
{406 * OVERSAMPLENR, 110},
{446 * OVERSAMPLENR, 105},
{496 * OVERSAMPLENR, 100},
{539 * OVERSAMPLENR, 95},
{585 * OVERSAMPLENR, 90},
{629 * OVERSAMPLENR, 85},
{675 * OVERSAMPLENR, 80},
{718 * OVERSAMPLENR, 75},
{758 * OVERSAMPLENR, 70},
{793 * OVERSAMPLENR, 65},
{822 * OVERSAMPLENR, 60},
{841 * OVERSAMPLENR, 55},
{875 * OVERSAMPLENR, 50},
{899 * OVERSAMPLENR, 45},
{926 * OVERSAMPLENR, 40},
{946 * OVERSAMPLENR, 35},
{962 * OVERSAMPLENR, 30},
{977 * OVERSAMPLENR, 25},
{987 * OVERSAMPLENR, 20},
{995 * OVERSAMPLENR, 15},
{1001 * OVERSAMPLENR, 10},
{1010 * OVERSAMPLENR, 0},
{1023 * OVERSAMPLENR, -40},
};
#endif
// Pt1000 and Pt100 handling
//
// Rt=R0*(1+a*T+b*T*T) [for T>0]
// a=3.9083E-3, b=-5.775E-7
#define PtA 3.9083E-3
#define PtB -5.775E-7
#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORHEATER_3 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
const short temptable_110[][2] PROGMEM = {
// only few values are needed as the curve is very flat
PtLine(0, 100, 1000)
PtLine(50, 100, 1000)
PtLine(100, 100, 1000)
PtLine(150, 100, 1000)
PtLine(200, 100, 1000)
PtLine(250, 100, 1000)
PtLine(300, 100, 1000)
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORHEATER_3 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
const short temptable_147[][2] PROGMEM = {
// only few values are needed as the curve is very flat
PtLine(0, 100, 4700)
PtLine(50, 100, 4700)
PtLine(100, 100, 4700)
PtLine(150, 100, 4700)
PtLine(200, 100, 4700)
PtLine(250, 100, 4700)
PtLine(300, 100, 4700)
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORHEATER_3 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
const short temptable_1010[][2] PROGMEM = {
PtLine(0, 1000, 1000)
PtLine(25, 1000, 1000)
PtLine(50, 1000, 1000)
PtLine(75, 1000, 1000)
PtLine(100, 1000, 1000)
PtLine(125, 1000, 1000)
PtLine(150, 1000, 1000)
PtLine(175, 1000, 1000)
PtLine(200, 1000, 1000)
PtLine(225, 1000, 1000)
PtLine(250, 1000, 1000)
PtLine(275, 1000, 1000)
PtLine(300, 1000, 1000)
};
#endif
2015-01-23 16:13:06 -06:00
#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORHEATER_3 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
const short temptable_1047[][2] PROGMEM = {
// only few values are needed as the curve is very flat
PtLine(0, 1000, 4700)
PtLine(50, 1000, 4700)
PtLine(100, 1000, 4700)
PtLine(150, 1000, 4700)
PtLine(200, 1000, 4700)
PtLine(250, 1000, 4700)
PtLine(300, 1000, 4700)
};
#endif
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User defined table
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
#ifndef DUMMY_THERMISTOR_999_VALUE
#define DUMMY_THERMISTOR_999_VALUE 25
#endif
const short temptable_999[][2] PROGMEM = {
{1 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE},
{1023 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE}
};
#endif
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) //User defined table
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
#ifndef DUMMY_THERMISTOR_998_VALUE
#define DUMMY_THERMISTOR_998_VALUE 25
#endif
const short temptable_998[][2] PROGMEM = {
{1 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE},
{1023 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE}
};
#endif
#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)
2011-11-04 16:51:14 -05:00
#ifdef THERMISTORHEATER_0
#define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
#define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
#else
#ifdef HEATER_0_USES_THERMISTOR
#error No heater 0 thermistor table specified
#else // HEATER_0_USES_THERMISTOR
#define HEATER_0_TEMPTABLE NULL
#define HEATER_0_TEMPTABLE_LEN 0
#endif // HEATER_0_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_0_RAW_HI_TEMP
#ifdef HEATER_0_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
#define HEATER_0_RAW_HI_TEMP 0
#define HEATER_0_RAW_LO_TEMP 16383
#else //In case of an thermocouple the highest temperature results in the highest ADC value
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0
#endif
2011-11-05 13:21:36 -05:00
#endif
#ifdef THERMISTORHEATER_1
#define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
#define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
#else
#ifdef HEATER_1_USES_THERMISTOR
#error No heater 1 thermistor table specified
#else // HEATER_1_USES_THERMISTOR
#define HEATER_1_TEMPTABLE NULL
#define HEATER_1_TEMPTABLE_LEN 0
#endif // HEATER_1_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_1_RAW_HI_TEMP
#ifdef HEATER_1_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
#define HEATER_1_RAW_HI_TEMP 0
#define HEATER_1_RAW_LO_TEMP 16383
#else //In case of an thermocouple the highest temperature results in the highest ADC value
#define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0
#endif
2011-11-04 16:51:14 -05:00
#endif
#ifdef THERMISTORHEATER_2
#define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
#define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
#else
#ifdef HEATER_2_USES_THERMISTOR
#error No heater 2 thermistor table specified
#else // HEATER_2_USES_THERMISTOR
#define HEATER_2_TEMPTABLE NULL
#define HEATER_2_TEMPTABLE_LEN 0
#endif // HEATER_2_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_2_RAW_HI_TEMP
#ifdef HEATER_2_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
#define HEATER_2_RAW_HI_TEMP 0
#define HEATER_2_RAW_LO_TEMP 16383
#else //In case of an thermocouple the highest temperature results in the highest ADC value
#define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0
#endif
#endif
2011-08-12 15:28:35 -05:00
2015-01-23 16:13:06 -06:00
#ifdef THERMISTORHEATER_3
#define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
#define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
2015-01-23 16:13:06 -06:00
#else
#ifdef HEATER_3_USES_THERMISTOR
#error No heater 3 thermistor table specified
#else // HEATER_3_USES_THERMISTOR
#define HEATER_3_TEMPTABLE NULL
#define HEATER_3_TEMPTABLE_LEN 0
#endif // HEATER_3_USES_THERMISTOR
2015-01-23 16:13:06 -06:00
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_3_RAW_HI_TEMP
#ifdef HEATER_3_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
#define HEATER_3_RAW_HI_TEMP 0
#define HEATER_3_RAW_LO_TEMP 16383
#else //In case of an thermocouple the highest temperature results in the highest ADC value
#define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0
#endif
2015-01-23 16:13:06 -06:00
#endif
#ifdef THERMISTORBED
#define BEDTEMPTABLE TT_NAME(THERMISTORBED)
#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
#else
#ifdef BED_USES_THERMISTOR
#error No bed thermistor table specified
#endif // BED_USES_THERMISTOR
2011-11-04 16:51:14 -05:00
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_BED_RAW_HI_TEMP
#ifdef BED_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
#define HEATER_BED_RAW_HI_TEMP 0
#define HEATER_BED_RAW_LO_TEMP 16383
#else //In case of an thermocouple the highest temperature results in the highest ADC value
#define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0
#endif
#endif
2011-11-04 16:51:14 -05:00
#endif //THERMISTORTABLES_H_