Marlin_Firmware/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

#if !defined(STM32F4) && !defined(STM32F4xx)
  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 6 || E_STEPPERS > 6
  #error "FLYF407ZG supports up to 6 hotends / E-steppers."
#endif

#define BOARD_INFO_NAME      "FLYF407ZG"
#define BOARD_WEBSITE_URL    "github.com/FLYmaker/FLYF407ZG"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

#undef E2END
#define E2END 0xFFF                               // 4KB

//
// Servos
//
#define SERVO0_PIN                          PE11

//
// Limit Switches
//
#define X_MIN_PIN                           PC3
#define X_MAX_PIN                           PC2
#define Y_MIN_PIN                           PF2
#define Y_MAX_PIN                           PF1
#define Z_MIN_PIN                           PF0
#define Z_MAX_PIN                           PC15

//
// Z Probe (when not Z_MIN_PIN)
//
#define Z_MIN_PROBE_PIN                     PC14  // Z3_PIN

//
// Steppers
//

#define X_STEP_PIN                          PB9
#define X_DIR_PIN                           PE0
#define X_ENABLE_PIN                        PE1
#ifndef X_CS_PIN
  #define X_CS_PIN                          PG13
#endif

#define Y_STEP_PIN                          PB8
#define Y_DIR_PIN                           PG11
#define Y_ENABLE_PIN                        PG12
#ifndef Y_CS_PIN
  #define Y_CS_PIN                          PG10
#endif

#define Z_STEP_PIN                          PA8
#define Z_DIR_PIN                           PD6
#define Z_ENABLE_PIN                        PD7
#ifndef Z_CS_PIN
  #define Z_CS_PIN                          PD5
#endif

#define E0_STEP_PIN                         PC7
#define E0_DIR_PIN                          PD3
#define E0_ENABLE_PIN                       PD4
#ifndef E0_CS_PIN
  #define E0_CS_PIN                         PD1
#endif

#define E1_STEP_PIN                         PC6
#define E1_DIR_PIN                          PA15
#define E1_ENABLE_PIN                       PD0
#ifndef E1_CS_PIN
  #define E1_CS_PIN                         PA14
#endif

#define E2_STEP_PIN                         PD15
#define E2_DIR_PIN                          PG7
#define E2_ENABLE_PIN                       PG8
#ifndef E2_CS_PIN
  #define E2_CS_PIN                         PG6
#endif

#define E3_STEP_PIN                         PD14
#define E3_DIR_PIN                          PG4
#define E3_ENABLE_PIN                       PG5
#ifndef E3_CS_PIN
  #define E3_CS_PIN                         PG3
#endif

#define E4_STEP_PIN                         PD13
#define E4_DIR_PIN                          PD11
#define E4_ENABLE_PIN                       PG2
#ifndef E4_CS_PIN
  #define E4_CS_PIN                         PD10
#endif

#define E5_STEP_PIN                         PD12
#define E5_DIR_PIN                          PD8
#define E5_ENABLE_PIN                       PD9
#ifndef E5_CS_PIN
  #define E5_CS_PIN                         PB12
#endif

//
// Temperature Sensors
//
#define TEMP_0_PIN                          PA0   // Analog Input
#define TEMP_1_PIN                          PC1   // Analog Input
#define TEMP_2_PIN                          PC0   // Analog Input
#define TEMP_3_PIN                          PF10  // Analog Input
#define TEMP_4_PIN                          PF5   // Analog Input
#define TEMP_5_PIN                          PF4   // Analog Input
#define TEMP_BED_PIN                        PF3   // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN                        PF7
#define HEATER_1_PIN                        PF6
#define HEATER_2_PIN                        PE6
#define HEATER_3_PIN                        PE5
#define HEATER_4_PIN                        PE4
#define HEATER_5_PIN                        PA2
#define HEATER_BED_PIN                      PE2

#ifndef FAN_PIN
  #define FAN_PIN                           PF8
#endif
#define FAN1_PIN                            PF9
#define FAN2_PIN                            PE3
#define FAN3_PIN                            PA1
#define FAN4_PIN                            PE13
#define FAN5_PIN                            PB11

//
// Onboard SD support
//

#define SDIO_D0_PIN                         PC8
#define SDIO_D1_PIN                         PC9
//#define SD_CARD_DETECT_PIN                PC13
#define SDIO_D2_PIN                         PC10
#define SDIO_D3_PIN                         PC11
#define SDIO_CK_PIN                         PC12
#define SDIO_CMD_PIN                        PD2

#ifndef SDCARD_CONNECTION
  #define SDCARD_CONNECTION              ONBOARD
#endif

#if SD_CONNECTION_IS(ONBOARD)
  #define SDIO_SUPPORT                            // Use SDIO for onboard SD

  #ifndef SDIO_SUPPORT
    #define SOFTWARE_SPI                          // Use soft SPI for onboard SD
    #define SDSS                     SDIO_D3_PIN
    #define SCK_PIN                  SDIO_CK_PIN
    #define MISO_PIN                 SDIO_D0_PIN
    #define MOSI_PIN                SDIO_CMD_PIN
  #endif
#endif

//
// Trinamic Software SPI
//

#if ENABLED(TMC_USE_SW_SPI)
  #ifndef TMC_SW_MOSI
    #define TMC_SW_MOSI                     PB15
  #endif
  #ifndef TMC_SW_MISO
    #define TMC_SW_MISO                     PB14
  #endif
  #ifndef TMC_SW_SCK
    #define TMC_SW_SCK                      PB13
  #endif
#endif

//
// Trinamic Software Serial
//

#if HAS_TMC_UART
  #define X_SERIAL_TX_PIN                   PG13
  #define X_SERIAL_RX_PIN                   PG13

  #define Y_SERIAL_TX_PIN                   PG10
  #define Y_SERIAL_RX_PIN                   PG10

  #define Z_SERIAL_TX_PIN                   PD5
  #define Z_SERIAL_RX_PIN                   PD5

  #define E0_SERIAL_TX_PIN                  PD1
  #define E0_SERIAL_RX_PIN                  PD1

  #define E1_SERIAL_TX_PIN                  PA14
  #define E1_SERIAL_RX_PIN                  PA14

  #define E2_SERIAL_TX_PIN                  PG6
  #define E2_SERIAL_RX_PIN                  PG6

  #define E3_SERIAL_TX_PIN                  PG3
  #define E3_SERIAL_RX_PIN                  PG3

  #define E4_SERIAL_TX_PIN                  PD10
  #define E4_SERIAL_RX_PIN                  PD10

  #define E5_SERIAL_TX_PIN                  PB12
  #define E5_SERIAL_RX_PIN                  PB12

#endif

//
// LCD / Controller
//
#define SCK_PIN                             PB13
#define MISO_PIN                            PB14
#define MOSI_PIN                            PB15
#define SDSS                                PF11
#define SD_DETECT_PIN                       PB2
#define BEEPER_PIN                          PB10
#define LCD_PINS_RS                         PE12
#define LCD_PINS_ENABLE                     PE14
#define LCD_PINS_D4                         PE10
#define LCD_PINS_D5                         PE9
#define LCD_PINS_D6                         PE8
#define LCD_PINS_D7                         PE7
#define BTN_EN1                             PC4
#define BTN_EN2                             PC5
#define BTN_ENC                             PE15

//
// Filament runout
//

#define FIL_RUNOUT_PIN                      PA3

//
// ST7920 Delays
//
#ifndef ST7920_DELAY_1
  #define ST7920_DELAY_1            DELAY_NS(96)
#endif
#ifndef ST7920_DELAY_2
  #define ST7920_DELAY_2            DELAY_NS(48)
#endif
#ifndef ST7920_DELAY_3
  #define ST7920_DELAY_3           DELAY_NS(715)
#endif