Marlin_Firmware/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

//
// FYSETC F6 1.3 (and 1.4) pin assignments
//

#ifndef __AVR_ATmega2560__
  #error "Oops! Select 'FYSETC F6' in 'Tools > Board.'"
#endif

#ifndef BOARD_INFO_NAME
  #define BOARD_INFO_NAME "FYSETC F6 1.3"
#endif

#define RESET_PIN                             30
#define SPI_FLASH_CS                          83

//
// Servos
//
#define SERVO0_PIN                            13
#define SERVO1_PIN                            11  // (PS_ON_PIN)
#define SERVO2_PIN                            10  // (FIL_RUNOUT_PIN)
#define SERVO3_PIN                             4  // (RGB_LED_G_PIN)

//
// Limit Switches
//
#define X_MIN_PIN                             63
#define X_MAX_PIN                             64
#define Y_MIN_PIN                             14
#define Y_MAX_PIN                             15
#define Z_MIN_PIN                             12
#ifndef Z_MAX_PIN
  #define Z_MAX_PIN                            9
#endif

#ifndef FIL_RUNOUT_PIN
  #define FIL_RUNOUT_PIN              SERVO2_PIN
#endif

//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
  #define Z_MIN_PROBE_PIN                      9  // Servos pin
#endif

//
// Steppers
//
#define X_STEP_PIN                            54
#define X_DIR_PIN                             55
#define X_ENABLE_PIN                          38
#ifndef X_CS_PIN
  #define X_CS_PIN                            70
#endif

#define Y_STEP_PIN                            60
#define Y_DIR_PIN                             61
#define Y_ENABLE_PIN                          56
#ifndef Y_CS_PIN
  #define Y_CS_PIN                            39
#endif

#define Z_STEP_PIN                            43
#define Z_DIR_PIN                             48
#define Z_ENABLE_PIN                          58
#ifndef Z_CS_PIN
  #define Z_CS_PIN                            74
#endif

#define E0_STEP_PIN                           26
#define E0_DIR_PIN                            28
#define E0_ENABLE_PIN                         24
#ifndef E0_CS_PIN
  #define E0_CS_PIN                           47
#endif

#define E1_STEP_PIN                           36
#define E1_DIR_PIN                            34
#define E1_ENABLE_PIN                         30
#ifndef E1_CS_PIN
  #define E1_CS_PIN                           32
#endif

#define E2_STEP_PIN                           59
#define E2_DIR_PIN                            57
#define E2_ENABLE_PIN                         40
#ifndef E2_CS_PIN
  #define E2_CS_PIN                           42
#endif

//
// Sensorless homing DIAG pin is not directly connected to the MCU. Close
// the jumper next to the limit switch socket when using sensorless homing.
//

#if HAS_TMC_UART
  /**
   * TMC2208/TMC2209 stepper drivers
   *
   * Software serial communication pins.
   * At the moment, F6 rx pins are not pc interrupt pins
   */
  #ifndef X_SERIAL_RX_PIN
    #define X_SERIAL_RX_PIN                   -1  // 71
  #endif
  #ifndef X_SERIAL_TX_PIN
    #define X_SERIAL_TX_PIN                   72
  #endif
  #ifndef Y_SERIAL_RX_PIN
    #define Y_SERIAL_RX_PIN                   -1  // 73
  #endif
  #ifndef Y_SERIAL_TX_PIN
    #define Y_SERIAL_TX_PIN                   75
  #endif
  #ifndef Z_SERIAL_RX_PIN
    #define Z_SERIAL_RX_PIN                   -1  // 78
  #endif
  #ifndef Z_SERIAL_TX_PIN
    #define Z_SERIAL_TX_PIN                   79
  #endif
  #ifndef E0_SERIAL_RX_PIN
    #define E0_SERIAL_RX_PIN                  -1  // 76
  #endif
  #ifndef E0_SERIAL_TX_PIN
    #define E0_SERIAL_TX_PIN                  77
  #endif
  #ifndef E1_SERIAL_RX_PIN
    #define E1_SERIAL_RX_PIN                  -1  // 80
  #endif
  #ifndef E1_SERIAL_TX_PIN
    #define E1_SERIAL_TX_PIN                  81
  #endif
  #ifndef E2_SERIAL_RX_PIN
    #define E2_SERIAL_RX_PIN                  -1  // 22
  #endif
  #ifndef E2_SERIAL_TX_PIN
    #define E2_SERIAL_TX_PIN                  82
  #endif
#endif

//
// Temperature Sensors
//
#define TEMP_0_PIN                            12  // Analog Input
#define TEMP_1_PIN                            13  // Analog Input
#define TEMP_2_PIN                            14  // Analog Input
#define TEMP_BED_PIN                          15  // Analog Input

#ifndef FILWIDTH_PIN
  #define FILWIDTH_PIN                         9  // Analog Input on X+ endstop
#endif

//
// Heaters / Fans
//
#define HEATER_0_PIN                           5
#define HEATER_1_PIN                           6
#define HEATER_2_PIN                           7
#define HEATER_BED_PIN                         8

#define FAN_PIN                               44
#define FAN1_PIN                              45
#define FAN2_PIN                              46

//
// Misc. Functions
//
#define SDSS                                  53
#define LED_PIN                               13
#define KILL_PIN                              41

#ifndef PS_ON_PIN
  #define PS_ON_PIN                   SERVO1_PIN
#endif

/**
 *               -----                                             -----
 *       5V/D41 | · · | GND                                    5V | · · | GND
 *        RESET | · · | D49 (SD_DETECT)             (LCD_D7)  D29 | · · | D27  (LCD_D6)
 *   (MOSI) D51 | · · | D33 (BTN_EN2)               (LCD_D5)  D25 | · · | D23  (LCD_D4)
 *  (SD_SS) D53 | · · | D31 (BTN_EN1)               (LCD_RS)  D16 | · · | D17  (LCD_EN)
 *    (SCK) D52 | · · | D50 (MISO)                 (BTN_ENC)  D35 | · · | D37  (BEEPER)
 *               -----                                             -----
 *               EXP2                                              EXP1
 */

//
// LCDs and Controllers
//
#define BEEPER_PIN                            37
#define SD_DETECT_PIN                         49

#if ENABLED(FYSETC_MINI_12864)
  //
  // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
  //
  #define DOGLCD_A0                           16
  #define DOGLCD_CS                           17

  #if ENABLED(FYSETC_GENERIC_12864_1_1)
    #define LCD_BACKLIGHT_PIN                 27
  #endif

  #define KILL_PIN                            41
  #define LCD_RESET_PIN                       23  // Must be high or open for LCD to operate normally.
                                // Seems to work best if left open.

  #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
    #ifndef RGB_LED_R_PIN
      #define RGB_LED_R_PIN                   25
    #endif
    #ifndef RGB_LED_G_PIN
      #define RGB_LED_G_PIN                   27
    #endif
    #ifndef RGB_LED_B_PIN
      #define RGB_LED_B_PIN                   29
    #endif
  #elif ENABLED(FYSETC_MINI_12864_2_1)
    #define NEOPIXEL_PIN                      25
  #endif

#elif HAS_GRAPHICAL_LCD

  #define LCD_PINS_RS                         16
  #define LCD_PINS_ENABLE                     17
  #define LCD_PINS_D4                         23
  #define LCD_PINS_D5                         25
  #define LCD_PINS_D6                         27
  #define LCD_PINS_D7                         29

  #if ENABLED(MKS_MINI_12864)
    #define DOGLCD_CS                         25
    #define DOGLCD_A0                         27
  #endif

#endif

#if ENABLED(NEWPANEL)
  #define BTN_EN1                             31
  #define BTN_EN2                             33
  #define BTN_ENC                             35
#endif

#ifndef RGB_LED_R_PIN
  #define RGB_LED_R_PIN                        3
#endif
#ifndef RGB_LED_G_PIN
  #define RGB_LED_G_PIN                        4
#endif
#ifndef RGB_LED_B_PIN
  #define RGB_LED_B_PIN                        9
#endif
#ifndef RGB_LED_W_PIN
  #define RGB_LED_W_PIN                       -1
#endif