Marlin_Firmware/Marlin/twibus.cpp

/*
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#include "Marlin.h"

#if ENABLED(EXPERIMENTAL_I2CBUS)

#include "twibus.h"

#include <Wire.h>

TWIBus::TWIBus() {
  Wire.begin(); // We use no address so we will join the BUS as the master
  this->reset();
}

void TWIBus::reset() {
  this->addr = 0;
  this->buffer_s = 0;
  this->buffer[0] = 0x00;
}

void TWIBus::address(uint8_t addr) {
  this->addr = addr;

  if (DEBUGGING(INFO)) {
    SERIAL_ECHOPAIR("TWIBus::sendto: ", this->addr);
    SERIAL_EOL;
  }
}

void TWIBus::addbyte(char c) {
  if (buffer_s >= sizeof(this->buffer)) return;
  this->buffer[this->buffer_s++] = c;

  if (DEBUGGING(INFO)) {
    SERIAL_ECHOPAIR("TWIBus::addbyte: ", this->buffer[this->buffer_s -1]);
    SERIAL_EOL;
  }
}

void TWIBus::send() {
  if (!this->addr) return;
  if (DEBUGGING(INFO)) SERIAL_ECHOLNPGM("TWIBus::send()");

  Wire.beginTransmission(this->addr);
  Wire.write(this->buffer, this->buffer_s);
  Wire.endTransmission();

    // Reset the buffer after sending the data
  this->reset();
}

void TWIBus::reqbytes(uint8_t bytes) {
  if (!this->addr) return;
  if (DEBUGGING(INFO)) {
    SERIAL_ECHOPAIR("TWIBus::reqbytes(): ", bytes);
    SERIAL_EOL;
  }

  millis_t t = millis() + this->timeout;
  Wire.requestFrom(this->addr, bytes);

    // requestFrom() is a blocking function
  while (Wire.available() < bytes) {
    if (ELAPSED(millis(), t)) break;
    else continue;
  }

  SERIAL_ECHO_START;
  SERIAL_ECHOPAIR("i2c-reply: from:", this->addr);
  SERIAL_ECHOPAIR(" bytes:", Wire.available());
  SERIAL_ECHOPGM (" data:");

    // Protect against buffer overflows if the number of received bytes
    // is less than the number of requested bytes
  uint8_t wba = Wire.available();
  for (int i = 0; i < wba; i++) SERIAL_CHAR(Wire.read());
  SERIAL_EOL;

  // Reset the buffer after sending the data
  this->reset();
}

#endif //EXPERIMENTAL_I2CBUS