Marlin_Firmware/Marlin/src/gcode/control/T.cpp

81 lines
2.4 KiB
C++
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2019-06-27 23:57:50 -05:00
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-27 23:57:50 -05:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2017-09-18 01:05:44 -05:00
#include "../gcode.h"
#include "../../module/tool_change.h"
#if ENABLED(DEBUG_LEVELING_FEATURE) || EXTRUDERS > 1
2017-09-18 01:05:44 -05:00
#include "../../module/motion.h"
#endif
2019-01-31 19:10:52 -06:00
#if ENABLED(PRUSA_MMU2)
#include "../../feature/prusa_MMU2/mmu2.h"
#endif
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
#include "../../core/debug_out.h"
/**
2019-01-31 19:10:52 -06:00
* T0-T<n>: Switch tool, usually switching extruders
*
* F[units/min] Set the movement feedrate
* S1 Don't move the tool in XY after change
2019-01-31 19:10:52 -06:00
*
* For PRUSA_MMU2:
* T[n] Gcode to extrude at least 38.10 mm at feedrate 19.02 mm/s must follow immediately to load to extruder wheels.
* T? Gcode to extrude shouldn't have to follow. Load to extruder wheels is done automatically.
* Tx Same as T?, but nozzle doesn't have to be preheated. Tc requires a preheated nozzle to finish filament load.
* Tc Load to nozzle after filament was prepared by Tc and nozzle is already heated.
*/
void GcodeSuite::T(const uint8_t tool_index) {
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPAIR(">>> T(", tool_index, ")");
DEBUG_POS("BEFORE", current_position);
}
2019-01-31 19:10:52 -06:00
#if ENABLED(PRUSA_MMU2)
if (parser.string_arg) {
2019-04-08 17:56:40 -05:00
mmu2.tool_change(parser.string_arg); // Special commands T?/Tx/Tc
2019-01-31 19:10:52 -06:00
return;
}
#endif
#if EXTRUDERS < 2
tool_change(tool_index);
#else
tool_change(
tool_index,
(tool_index == active_extruder) || parser.boolval('S')
);
#endif
if (DEBUGGING(LEVELING)) {
DEBUG_POS("AFTER", current_position);
DEBUG_ECHOLNPGM("<<< T()");
}
}